The individual and cumulative effect of brominated flame retardant and polyvinylchloride (PVC) on thermal degradation of acrylonitrile-butadiene-styrene (ABS) copolymer

Acrylonitrile-butadiene-styrene (ABS) copolymers without and with a polybrominated epoxy type flame retardant were thermally degraded at 450 degrees C alone (10 g) and mixed with polyvinylchloride (PVC) (8 g/2 g). Gaseous and liquid products of degradation were analysed by various gas chromatographic methods (GC with TCD, FID, AED, MSD) in order to determine the individual and cumulative effect of bromine and chlorine on the quality and quantity of degradation compounds. It was found that nitrogen, chlorine, bromine and oxygen are present as organic compounds in liquid products, their quantity depends on the pyrolysed polymer or polymer mixture. Bromophenol and dibromophenols were the main brominated compounds that come from the flame retardant. 1-Chloroethylbenzene was the main chlorine compound observed in liquid products. It was also determined that interactions appear at high temperatures during decomposition between the flame retardant, PVC and the ABS copolymer.     

Electrolytic debromination of PBDEs in DE-83 technical decabromodiphenyl ether

Electrochemical debromination of the commercial decabromodiphenyl ether flame retardant DE-83 in partly aqueous tetrahydrofuran (THF) solution gave lower brominated congeners by sequential loss of bromine atoms. Hydrodebromination was most facile for the most heavily brominated congeners. It involves initial electron transfer and proton transfer from water, rather than hydrogen atom abstraction from THF, as shown by experiments with deuterated water. The product distribution from electrolysis involves preferential loss of bromine meta- and para- to the ether linkage, comparable with the products of metabolism of BDE-209 in various organisms. Significantly, the environmentally relevant congeners BDE-47, BDE-99, and BDE-154 were not major products of debromination of BDE-209 by the electron transfer mechanism.     

Effect of decabromodiphenyl ether and antimony trioxide on controlled pyrolysis of high-impact polystyrene mixed with polyolefins

The controlled pyrolysis of polyethylene/polypropylene/polystyrene mixed with brominated high-impact polystyrene containing decabromodiphenyl ether as a brominated flame-retardant with antimony trioxide as a synergist was performed. The effect of decabromodiphenyl ether and antimony trioxide on the formation of its congeners and their effect on distribution of pyrolysis products were investigated. The controlled pyrolysis significantly affected the decomposition behavior and the formation of products. Analysis with gas chromatograph with electron capture detector confirmed that the bromine content was rich in step 1 (oil 1) liquid products leaving less bromine content in the step 2 (oil 2) liquid products. In the presence of antimony containing samples, the major portion of bromine was observed in the form of antimony bromide and no flame-retardant species were found in oil 1. In the presence of synergist, the step 1 and step 2 oils contain both light and heavy compounds. In the absence of synergist, the heavy compounds in step 1 oil and light compounds in step 2 oils were observed. The presence of antimony bromide was confirmed in the step 1 oils but not in step 2 oils.     

A comparison of the properties of the major commercial PBDPO/PBDE product to those of major PBB and PCB products

Decabromodiphenyl oxide (DBDPO), a highly effective polybrominated diphenyl oxide (PBDPO) flame retardant (FR) used primarily in electrical and electronic equipment, is the second highest volume brominated flame retardant (BFR) and accounts for 82% of the PBDPO usage globally. The apparent similarities in chemical structure between the DBDPO, polychlorinated and polybrominated biphenyl (PCB, PBB) molecules have led to the presumption that these substances also share similar toxicological and environmental properties. However, DBDPO's physical/chemical properties, applications, environmental release, and toxicology differ substantially from the former PCB/PBB products. DBDPO is a heavier and larger molecule than components of the predominant PCB/PBB products used in the past, and the commercial DBDPO product has a lower water solubility and vapor pressure than the former PCB and PBB products. DBDPO's detection in the environment is generally in sediments near known point sources, and its primary use in thermoplastics limits its environmental release from end products. PBB environmental release has been primarily associated with one accident occurring in the US in 1973. The PCBs, used in applications with a high potential for environmental release, were detected in diverse locations around the world as early as in the 1970s. Current releases of PCB are considered related to an environmental cycling process of congeners previously released into the environment; however, DBDPO's physical/chemical properties do not indicate a similar potential. Extensive testing of the DBDPO commercial product has demonstrated that it is toxicologically and pharmacokinetically different from the predominant PCB and PBB products used in the past. Thus, although the chemical structures of DBDPO, PBB, and PCB appear similar, the properties of DBDPO are distinctly different.     

Physicochemical properties of selected polybrominated diphenyl ethers and extension of the UNIFAC model to brominated aromatic compounds

The aqueous solubilities (S(w)) at various temperatures from 283 K to 308 K and 1-octanol/water partition coefficients (K(ow)) for four polybrominated diphenyl ethers (PBDEs: 4,4'-dibromodiphenyl ether (BDE-15), 2,2',4,4'-tetrabromodiphenyl ether (BDE-47), 2,2',4,4',5-pentabromodiphenyl ether (BDE-99), and 2,2',4,4',5,5'-hexabromodiphenyl ether (BDE-153)) were measured by the generator column method. The S(w) and K(ow) data revealed the effect of bromine substitution and basic structure on S(w) and K(ow). To estimate the infinite dilution activity coefficients (gamma(i)(w,infinity)) of the PBDEs in water from the S(w) data, enthalpies of fusion and melting points for those compounds were measured with a differential scanning calorimeter. Henry's Law constants (H(w)) of the PBDEs were derived from the determined gamma(i)(w,infinity) and literature vapor pressure data. Some physicochemical characteristics of PBDEs were also suggested by comparing the present property data with that of polychlorinated dibenzo-p-dioxins, brominated phenols and brominated benzenes in past studies. Furthermore, in order to represent different phase equilibria including solubility and partition equilibrium for other brominated aromatic compounds using the UNIFAC model, a pair of UNIFAC group interaction parameters between the bromine and water group were determined from the S(w) and K(ow) data of PBDEs and brominated benzenes. The ability of the determined parameters to represent both properties of brominated aromatics was evaluated.     

Anaerobic formation and degradation of toxic aromatic compounds in agricultural and communal sewage deposits

Relatively high concentrations of phenol, p-cresol, phenylacetic acid and other aromatic compounds were found in agricultural and communal sewage deposits. These toxic aromatic compounds are products of the bacterial degradation of aromatic amino acids under anaerobic conditions. In laboratory experiments at 26 degrees C and under N2-atmosphere, the same aromatics were formed from the amino acid tyrosine and from gelatine in assays inoculated with sewage sludge. After exhaustion of tyrosine and gelatine, respectively, concentrations of the accumulated phenol and other aromatics remained stable for months, i.e., phenol, p-cresol, phenylacetic acid etc. are dead-end products of the bacterial metabolism under these conditions. After addition of sodium nitrate the aromatic compounds are metabolically decomposed by denitrification within weeks.     

On the thermally induced isomerisation of hexabromocyclododecane stereoisomers

The interconversion of the stereoisomers contained in technical 1,2,5,6,9,10-hexabromocyclododecane, a major brominated flame retardant increasingly found in the environment and in biota, was investigated at elevated temperatures. The application of pure enantiomers of the three constituents alpha-, beta-, and gamma-HBCD enabled the unambiguous elucidation of the individual isomerisation reactions as well as the quantification of all respective rate constants. At 160 degrees C the rate constants range over two orders of magnitude from 1.50x10(-3) to 1.88x10(-5)mol(%)s(-1). A preliminary mechanistic explanation for the differences of the rate constants which govern the composition of HBCD diastereomers at equilibrium is given.     

Persistent organic pollutants (POPs) in human milk: A biomonitoring study in rural areas of Flanders (Belgium)

To collect information on the concentrations of persistent organic pollutants (POPs) in the rural areas in Flanders (Belgium), 84 breastfeeding mothers were recruited in rural communities in East and West Flanders and Flemish Brabant in 2009-2010. Polychlorinated biphenyl (PCB) congeners, organochlorine pesticides, brominated flame retardants, perfluorinated compounds, polychlorinated dibenzodioxines and dibenzofurans, and dioxin-like PCBs were measured in individual milk samples and in a pooled milk sample, while some additional pollutants were only measured in the pooled sample. For most pollutants, the concentrations in this study were lower or comparable to the concentrations measured in the pooled Belgian sample of the WHO human milk study of 2006, except for the pesticides dichlorodiphenyltrichloroethane DDT (+25% for ΣDDT and metabolites) and trans-nonachlor (+94%), and for the brominated flame retardant hexachlorocyclododecane HBCD (+153%). Perfluorinated compounds were for the first time determined in human milk samples from Belgium and the concentrations were comparable to those from other European countries. Also, interesting associations were found between the concentrations of POPs measured in human milk and personal characteristics as well as dietary habits of the study population. PFOS en PFOA concentrations were significantly higher in milk of primiparous participants compared to mothers who gave birth to their second child. Lower brominated PBDE congeners increased with increasing BMI of the mothers (p = 0.01 for BDE 47, p = 0.02 for BDE 99 and p = 0.02 for BDE 100). Participants consuming milk or dairy products daily had significant higher concentrations of ΣDDTs (p = 0.03) and oxychlordane (p = 0.047) in their human milk samples.     

Remediation of PCB contaminated soils using iron nano-particles

In this study, iron nano-particles were used to remediate PCB contaminated soil and an attempt was made to maximize PCB destruction in each treatment step. The results show that nano-particles do aid in the dechlorination process and high PCB destruction efficiencies can be achieved. The destruction efficiency during the preliminary treatment (mixing of soil and iron nano-particles in water) can be increased by increasing the water temperature. The maximum thermal destruction (pyrolysis/combustion of soil after preliminary treatment) of soil-bound PCBs occurs at 300 degrees C in air. A minimum total PCB destruction efficiency of 95% can be achieved by this process. The effect of changing treatment parameters such as type of mixing, time of mixing and mixing conditions and application of other catalysts like iron oxide and V(2)O(5)/TiO(2) was also investigated. It was found that at 300 degrees C in air, iron oxide and V(2)O(5)/TiO(2) are also good catalysts for remediating PCB contaminated soils.     

Alkaline hydrothermal treatment of brominated high impact polystyrene (HIPS-Br) for bromine and bromine-free plastic recovery

A method to recover both Br and Br-free plastic from brominated flame retardant high impact polystyrene (HIPS-Br) was proposed. HIPS-Br containing 15% Br was treated in autoclave at 280 degrees C using water or KOH solution of various amounts and concentrations. Hydrothermal treatment (30 ml water) leads to 90% debromination of 1g HIPS-Br but plastic is strongly degraded and could not be recovered. Alkaline hydrothermal treatment (45 ml or 60 ml KOH 1M) showed similar debromination for up to 12 g HIPS-Br and plastic was recovered as pellets with molecular weight distribution close to that of the initial material. Debromination occurs at melt plastic/KOH solution interface when liquid/vapour equilibrium is attained inside autoclave (280 degrees C and 7 MPa in our experimental conditions) and depends on the plastic amount/KOH volume ratio. The antimony oxide synergist from HIPS-Br remains in recovered plastic during treatment. A pictorial imagination of the proposed debromination process is presented.     

Synthesis of polybrominated diphenyl ethers via symmetrical tetra- and hexabrominated diphenyliodonium salts

Polybrominated diphenyl ethers (PBDEs) are a class of brominated flame retardants (BFRs) which have become widespread environmental pollutants due to their persistence and bioaccumulativeness. Pure authentic PBDE congeners are required for chemical analysis, assessments of their chemical/physical properties and toxicological studies. We here report an improved method for synthesis of authentic PBDE congeners applying bromophenols and symmetrical brominated diphenyliodonium salts as building blocks. Altogether, 13 PBDEs were synthesized of which seven are new. The improved coupling reaction between the bromophenol and the brominated diphenyliodonium salts resulted in enhanced yields for PBDEs substituted with more than six bromine atoms. Also, improvements in iodonium salt synthesis made it possible to synthesize symmetrical hexabromodiphenyliodonium salts for the first time, i.e. 2,2',3,3',4,4'-, 2,2',4,4',5,5'- and 2,2',4,4',6,6'-hexabromodiphenyliodonium salts and they made it possible to prepare octabrominated PBDEs via the actual coupling method. All synthesized compounds were characterized by (1)H NMR, (13)C NMR spectra and by their melting points. Also, all products except for the diphenyliodonium salts were characterized by mass spectra in electron ionization mode.     

Study on the pyrolysis of polyethylene in the presence of iron and copper chlorides

Pyrolysis experiments were conducted to elucidate the effects of metal chlorides on the thermal degradation of low-density polyethylene on a continuous pyrolysis temperature range of 600 degrees C to 1100 degrees C. The present work focusses on the ratio of aromatics generated on increasing the pyrolysis temperature in the presence of metal salts, iron(II), iron(III) and copper(II) chlorides. It was observed that beside alpha,omega-dienes, alpha-olefins and n-alkanes which are usually observed during the thermal decomposition of polyethylene, the level of aromatics noticeably increases with the addition of metal salts. At high temperatures, the formation of these aromatics took place in such a way that they become the major products when polyethylene is pyrolyzed in presence of FeCl(3) and CuCl(2). Quantification of the effect of metal salts has been tempted comparing the variation of the ratio of aromatics with pyrolysis temperatures. Mechanisms responsible for the formation of these aromatics in presence of metal salts have been tentatively investigated. They are proposed to result from cyclization/dehydrogenation reactions similar to those observed during the thermal decomposition of polyethylene, but with an increased efficiency due to the metal salts.     

Stable carbon isotope analysis (δ13C values) of polybrominated diphenyl ethers and their UV-transformation products

Polybrominated diphenyl ethers (PBDEs) are frequently detected in food and environmental samples. We used compound specific isotope analysis to determine the δ¹³C values of individual PBDEs in two technical mixtures. Within the same technical product (DE-71 or DE-79), BDE congeners were the more depleted in ¹³C the higher brominated they were. In contrast, the products of light-induced hydrodebromination of BDE 47 and technical DE-79 were more enriched in ¹³C because of more stable bonds between ¹³C and bromine. As a result, the δ¹³C values of the irradiated solution progressed diametrically compared to those of the technical synthesis. The ratio of the δ¹³C values of BDE 47 to BDE 99 and of BDE 99 to BDE 153 are thus suggested as indicators to distinguish native technical products from transformation products. Ratios <1 are typical for native congeners (e.g. in DE-71) while the reversed ratio (>1) is typical of transformation products.     

Surface-mediated formation of PBDD/Fs from the high-temperature oxidation of 2-bromophenol on a CuO/silica surface

As a model brominated hydrocarbon that may form brominated dioxins, we studied the surface-mediated, oxidative thermal degradation of 2-bromophenol on a supported copper oxide catalyst in a 1 mm i.d., fused silica flow reactor at a constant concentration of 90 ppm over a temperature range from 250 to 550 degrees C. Observed products included: dibenzo-p-dioxin (DD), 1-monobromodibenzo-p-dioxin (1-MBDD), dibromodibenzo-p-dioxin (DBDD), tribromodibenzo-p-dioxin (TrBDD), 4-monobromodibenzofuran (4-MBDF), 2,4,6-tribromophenol, 2,4- and 2,6-dibromophenol, and polybrominated benzenes. The results are compared and contrasted with previous work on surface catalyzed oxidative thermal degradation of 2-chlorophenol as well as our own work with the surface-catalyzed pyrolytic thermal degradation of 2-bromophenol. Typically 20 to 200x higher yields of PBDDs are observed for 2-bromophenol than for the analogous PCDDs for 2-chlorophenol. However the anticipated PBDF, 4,6-DBDF, was not observed and 4-MBDF was observed at very low yields. Surprisingly, the maximum yields of PBDDs were observed at higher temperatures than under pyrolytic conditions. This is attributed to regeneration of the catalytic surface due to the presence of oxygen. Higher yields of polybrominated phenols and polybrominated benzenes were also observed than for the analogous chlorinated phenols and benzenes from the oxidation of 2-chlorophenol. This can be attributed to the ease of bromination over chlorination based on the higher abundance of bromine atoms present for 2-bromophenol than chlorine atoms present for 2-chlorophenol.     

Preparation and X-ray structural characterization of further stereoisomers of 1,2,5,6,9,10-hexabromocyclododecane

Technical 1,2,5,6,9,10-hexabromocyclododecane (HBCD) consists largely of three diastereomers (α-, β-, and γ-HBCD) produced by the trans addition of bromine to cis,trans,trans-cyclododeca-1,5,9-triene (CDT). However, another seven diastereomers are theoretically possible and may be produced by trans addition of bromine across the double bonds of the other three isomers of 1,5,9-CDT. There are indications that small amounts of the minor HBCD isomers may be present in commercial HBCD mixtures or in products containing this brominated flame retardant (BFR). Such minor components may indeed derive from traces of other 1,5,9-CDTs in the cis, trans, trans starting material, however their formation may also be possible through isomerizations during the processing of this BFR or by bioisomerization subsequent to its release into the environment. Two of the seven additional diastereomers (δ- and ε-HBCD) were synthesized previously from trans,trans,trans-CDT. We now report the preparation of the remaining five diastereomers, ζ-, η-, and θ-HBCD from cis,cis,trans-CDT and ι- and κ-HBCD from cis,cis,cis-CDT, and their characterization by ¹H NMR spectroscopy and X-ray crystallography. The availability of these further diastereomers of HBCD should aid in determining if the minor isomers are present in commercial samples of this BFR, in products containing HBCDs, or in environmental samples. We have also carried out an X-ray crystal structure determination on ε-HBCD, so that crystal structures are now available for all 10 HBCD diastereomers.     

Maternal exposure to polybrominated and polychlorinated biphenyls: infant birth weight and gestational age

Understanding the influence of maternal exposures on gestational age and birth weight is essential given that pre-term and/or low birth weight infants are at risk for increased mortality and morbidity. We performed a retrospective analysis of a cohort exposed to polybrominated biphenyls (PBB) through accidental contamination of cattle feed and polychlorinated biphenyls (PCB) through residual contamination in the geographic region. Our study population consisted of 444 mothers and their 899 infants born between 1975 and 1997. Using restricted maximum likelihood estimation, no significant association was found between estimated maternal serum PBB at conception or enrollment PCB levels and gestational age or infant birth weight in unadjusted models or in models that adjusted for maternal age, smoking, parity, infant gender, and decade of birth. For enrollment maternal serum PBB, no association was observed for gestational age. However, a negative association with high levels of enrollment maternal serum PBB and birth weight was suggested. We also examined the birth weight and gestational age among offspring of women with the highest (10%) PBB or PCB exposure, and observed no significant association. Because brominated compounds are currently used in consumer products and therefore, are increasingly prevalent in the environment, additional research is needed to better understand the potential relationship between in utero exposure to brominated compounds and adverse health outcomes.     

Degradation pathways of decabromodiphenyl ether during hydrothermal treatment

The hydrothermal degradation pathways of decabromodiphenyl ether during hydrothermal treatment were investigated. After an initial "Heating time", the reaction runs were carried out at constant temperature (heating to 300 degrees C and keeping temperature) and pressure (8MPa) in a SUS316 stainless steel micro autoclave filled with water. Some decomposition of decabromodiphenyl ether was observed over 200 degrees C, and it was decomposed by more than 99% after 10 min at 300 degrees C. The reactivities of bromine on para and meta substituents were relatively high, while its reactivity on ortho bromine was extremely low. The formations of polybrominated dibenzo-p-dioxins and furans (PBDD/DFs) were observed in the early stages of the reactions at around 300 degrees C. The TCDD toxicity equivalency (TCDD-EQs) of the by-products was determined based on relative potencies (REPs EC(5TCDD)) with the Dioxin-Responsive-Chemical Activated Luciferase gene eXpression (DR-CALUX) bioassays technology. These results indicated that the risk of formation of PBDD/DFs in the hydrothermal degradation of deca-BDE was low, and it would be possible to reduce the TCDD-EQs value by adding some catalyst or alkali, or extending processing time.     

Heterogeneous mercury reaction chemistry on activated carbon

Experimental and theory-based investigations have been carried out on the oxidation and adsorption mechanism of mercury (Hg) on brominated activated carbon (AC). Air containing parts per billion concentrations of Hg was passed over a packed-bed reactor with varying sorbent materials at 140 and 30 degrees C. Through X-ray photoelectron spectroscopy surface characterization studies it was found that Hg adsorption is primarily associated with bromine (Br) on the surface, but that it may be possible for surface-bound oxygen (O) to play a role in determining the stability of adsorbed Hg. In addition to surface characterization experiments, the interaction of Hg with brominated AC was studied using plane-wave density functional theory. Various configurations of hydrogen, O, Br, and Hg on the zigzag edge sites of graphene were investigated, and although Hg-Br complexes were found to be stable on the surface, the most stable configurations found were those with Hg adjacent to O. The Hg-carbon (C) bond length ranged from 2.26 to 2.34 A and is approximately 0.1 A shorter when O is a nearest-neighbor atom rather than a next-nearest neighbor, resulting in increased stability of the given configuration and overall tighter Hg-C binding. Through a density of states analysis, Hg was found to gain electron density in the six p-states after adsorption and was found to donate electron density from the five s-states, thereby leading to an oxidized surface-bound Hg complex.     

Polychlorinated camphenes (toxaphenes), polybrominated diphenylethers and other halogenated organic pollutants in glaucous gull (Larus hyperboreus) from Svalbard and Bjørnøya (Bear Island)

The levels of polychlorinated camphenes (toxaphenes) were investigated in liver samples from 18 glaucous gulls (Larus hyperboreus) from Bj?rn?ya (74 degrees N, 19 degrees E) and four individuals from Longyearbyen (78 degrees N, 15 degrees E). Additionally brominated flame retardants (BFRs), PCBs and chlorinated pesticides were investigated in liver and intestinal contents of 15 of the glaucous gulls from Bj?rn?ya. Of the analysed BFRs only 2,2',4,4'-tetra- and 2,2',4,4',5-pentabrominated diphenylethers (PBDE 47 and 99) could be detected. The concentrations ranged between 2 and 25 ng/g ww. In addition, high resolution measurements with GC/HRMS revealed the existence of several, not quantified, PBDEs and polybrominated biphenyls (PBBs) congeners in the samples. B9-1679 and B8-1413 were the dominating toxaphenes with median concentrations of 8 and 15 ng/g ww. Concentrations of toxaphenes and PBDEs were up to 100-times lower than the concentrations of PCB and some of the pesticides. PCB and p,p/-DDE constituted 90% of the contaminants found.     

Pyrolytic characteristics of sewage sludge

In this study, a number of different sewage sludge including sludge samples from industrial and hospital wastewater treatment plants were characterized for pyrolysis behavior by means of thermogravimetric analysis up to 800 degrees C. According to the thermogravimetric results, five different types of mass loss behaviors were observed depending on the nature of the sludge used. Typical main decomposition steps occurred between 250 and 550 degrees C although some still decomposed at higher temperatures. The first group (Types I, II and III) was identified by main decomposition at approximately 300 degrees C and possible second reaction at higher temperature. Differences in the behavior may be due to different components in the sludge both quantitatively and qualitatively. The second group (Types IV and V), which rarely found, has unusual properties. DTG peaks were found at 293, 388 and 481 degrees C for Type IV and 255 and 397 degrees C for Type V. Kinetics of sludge decomposition can be described by either pseudo single or multicomponent overall models (PSOM or PMOM). The activation energy of the first reaction, corresponding to the main pyrolysis typically at 300 degrees C, was rather constant (between 68 and 77 kJ mol(-1)) while those of second and third reactions were varied in the range of 85-185 kJ mol(-1). The typical order of pyrolysis reaction was in the range of 1.1-2.1. The pyrolysis gases were composed of both saturated and unsaturated light hydrocarbons, carbon dioxide, ethanol and chloromethane. Most products, however, evolve at a quite similar temperature regardless of the sludge type.