Mercury and Organochlorine Contamination in Brown Trout (Salmo Trutta) and Arctic Charr (Salvelinus Alpinus) from High Mountain Lakes in Europe and the Svalbard Archipelago

High concentration of Hg, less volatile PCB congeners and p,p-DDE in Arctic charr from an arctic lake was mainly causedby biomagnification in the food chain where cannibalism was thedriving force. We suggest that low sediment fluxes of Hg, low net production of methyl mercury, and short food chains excludingpiscivory explain the low levels of Hg in the invertebrate feeding fish population in five European high mountain lakes.Concentrations of less volatile PCB congeners in insectivorous fish populations from the European high mountain lakes were mainly influenced by fish age and atmospheric deposition, indicated by the sediment inventory. Atmospheric deposition influenced by local sources may explain the higher concentrationsof pesticides (p,p-DDT, p,p-DDE and -HCH) observedin fish from the Pyrenees compared to the other sites. Theconcentrations of Hg and organochlorines did not exceedthe guidelines for fish consumption, except for Hg levelsin the oldest fish from the arctic lake.     

Gas and Aerosol Loadings at Holme Moss 1996–1998 Measurements and Analysis Using Back-Trajectory Clustering

A continuous two-year atmospheric datasetcomprising gas and aerosol loadings from amountain site in northern England (Holme Moss,W1°5130 N53°320) is presented. The data are analysed with respect to three-dayback-trajectories that are grouped according to aclustering technique that allows speed, directionand curvature of the airmass track to beconsidered. The technique is successful inseparating the data into chemically distinctsubsets. Up to 29% of the variance in the datais explained by back-trajectory clusters. Slow trajectories are associated with highloadings especially for the oxides of nitrogen,which may imply a local source for much of thesuspended pollutant. The data suggest thatproduction of nitrate and sulphate is limited byoxidant availability at least in the winter. Itmay be possible to optimise the analytical powerof the technique by increasing the importance ofrecent airmass track in determining clusterallocation. This applies especially to the totalsulphur loading.     

A carbon-13 method for evaluating degradation of starch-based polymers

A new method for evaluating biodegradability of starch-based and certain other polymer blends uses the pre- and postexposure stable carbon isotope composition of material coupled with weight loss data to determine which components have degraded. The naturally occurring stable isotope of carbon.¹³C, is enriched in corn starch (¹³C, approx. –11) compared to petroleum-derived synthetic polymers (¹³C, approx. –32). Results on starch-synthetic polymer blends indicate that the ¹³C signatures of these blends are near-linear mixtures of their component ¹³C. Values of a ¹³C for starch-synthetic polymer blends exposed to biologically active laboratory soil and artificial seawater conditions are depleted in¹³C compared to unexposed samples, suggesting loss of the starch component. Combined with weight loss data for the exposed samples, the ¹³C values are statistically consistent with models requiring loss of the soluble component glycerin, followed by loss of starch, then petrochemical polymer, or simultaneous loss of starch and petrochemical polymer. Replicate ¹³C analyses of starch-synthetic polymer blends increase the statistical power of this relatively inexpensive, accessible technique to discriminate between degrading components.     

Nature of Atmospheric Aerosols over the Desert Areas in the Asian Continent: Chemical State and Number Concentration of Particles Measured at Dunhuang,China

Measurements of aerosol were made in August and October 2001, and January 2002, at Dunhuang, China (40°00N, 94°30E), to understand the nature of atmosphericparticles over the desert areas in the Asian continent. Balloon-borne measurements with an optical particle counter suggested that particle size and concentration had a noticeable peak in size range of super micron in not only the boundary mixing layer but also the free troposphere. Thickness of the boundary mixing layer, from distributions of particle concentration, was about 4 km in summer (17 August 2001), about2.5 km in fall (17 October 2001), and about 3 km in winter (11 January 2002), which suggest active mixing of particles near the boundary in summer. Number-size distribution of particleshowed a noticeable peak in the super micron particles size range inthe mixing boundary layer: 0.4–2 particles cm^-3 at diameter>1.2 m in summer, 0.05–4 particles cm^-3 at diameter >1.2 m in fall, and 0.1–5 particles cm^-3 at diameter>1.2 m in winter. In winter strong inversion of atmospherictemperature was found in the height range from the boundary to about 3 km and vertical distribution of particle concentration well corresponded with the temperature distribution. Chemical elements of individual aerosols, which were collectedin the boundary layer atmosphere at Dunhuang (18 October 2001) were analyzed with an electron microscope equipped with EDX. Thosesingle particle analysis suggested that most of the particles with supermicron size were soil particles, and those particles had littlesulfate on its surface. This is a very important different point,comparing with the chemical state of soil particles, which weretransported from the desert area of China to Japan, and showed frequentlythe existence of sulfate on the particle surface. Therefore, it isstrongly suggested that dust particles can be chemically modifiedduring their long-range transport from desert areas to Japan.     

The Role Played by Acetyl Group Distribution Patterns in Substituted Starch Toward Enzymatic De-acetylation and Chain Fragmentation

The nature and distribution of the acetylated groups were evaluated by ¹³C-NMR and ¹H-NMR. The starch substrate with a DS of 1.5 comprises only two patterns: -(14)-d-glucopyranose and 2,3,6-tri-O-acetyl--(14)-d-glucopyranose. The starch with a DS of 3.0 also comprises two patterns: 2,3,4,6-tetra-O-acetyl--(14)-d-glucopyranose and 2,3,6-tri-O-acetyl--(14)-d-glucopyranose; whereas starch (DS = 1.9) contains 4 patterns: 2,3,6-tri-O-acetyl--(14)-d-glucopyranose, 2,3,4,6-tetra-O-acetyl--(14)-d-glucopyranose terminal, 2,6-di-O-acetyl--(14)-d-glucopyranose, and 3,6-di-O-acetyl--(14)-d-glucopyranose. Using esterase from Viscozyme, it has been possible to hydrolyze up to 7% of the DS 3.0 starch. An -amylase (Fungamyl 800) was then added to these acetylesterases. With a 2.4 FAU/mL fraction of -amylase and 2.4 U/mL from the Viscozyme's acetylesterase, 28% of the acetylated end groups were hydrolyzed for the starch substrates with DS 3.0. Moreover, a synergic action between -amylase and acetylesterase was noticed, allowing fragmentation of 32% for DS 1.5, 30% for DS 1.9, and 11% for DS 3.0.     

Synthesis and environmental degradation of polyesters based on poly (ε-caprolactone)

Poly (-caprolactone) (PCL), poly (-valerolactone) (PVL), poly (-caprolactone-co--valerolactone) [P(CL-co-VL)], and poly (-caprolactone-co-ethylene oxide-co--caprolactone) (PCL-PEO-PCL) were synthesized by ring-opening and diol-initiated polymerization of -caprolactone and -valerolactone. The degradation of the samples by chemical hydrolysis and in a soil burial test was evaluated. It was found that PCL, PVL, and P(CL-co-VL) degrade mainly enzymatically. The rate of degradation depends on their molecular weight, chemical structure, composition, and morphology. PCL-PEO-PCL block copolymers exhibit a repelling effect to the microorganisms in the soil, which depends on the molecular weight and relative amount of PEO block in the copolymer.     

Ring-Opening Polymerization of Cyclic Esters onto Liquefied Biomass

Ring-opening polymerization of cyclic esters (-caprolactone, -valerolactone, and l-lactide) onto liquefied biomass (LB) was conducted to obtain the polyester-type polyol and to regulate the characteristics of LB. IR and ¹H-NMR spectra of the obtained polyol showed that the polymerization was successfully conducted in the presence of acid catalyst, which is used in liquefaction. The molecular weight (M_w), hydroxyl value, and viscosity were controllable by changing the reaction conditions. Polyester-type polyurethane foams with a wide range of properties were prepared from the obtained polyol with the appropriate combinations of foaming agents.     

Enzyme-Mediated Reactions of Oligosaccharides and Polysaccharides

Two types of enzymatic reactions are given here as examples of synthetic problems encountered in industry. In the first case, commercially available -D-galactosidase from Escherichia coli was used as a catalyst to transfer galactose from -lactose to oligosaccharides. A preference for galactosyl transfer to the 3- or 4-position of the sugar moiety of the oligosaccharide was observed for the products. As expected, only the -anomer was produced. A wide variety of sugars, including disaccharides, trisaccharides, cellotetraose, and maltodextrins, has been shown to act as acceptors, yielding oligosaccharides. In the second example, -galactomannan that had been previously treated to contain cationic groups (cationic guar gum) was subjected to treatment with a series of inexpensive commercial enzymes such as lipases, protease, and cellulases. Some enzyme preparations showed significant changes in the viscosities of 1% cationic guar solution. For example, lipases from Aspergillus niger and Aspergillus saitoi and protease XIII from Rhizopus niveus produced a substantial viscosity reduction (0–20% of original viscosity). These examples demonstrate the utility of low-cost enzymes in manipulating polymer structures.     

Features in Number Concentration-Size Distributions of Aerosols in the Free Atmosphere over the Desert Areas in the Asian Continent: Balloon-Borne Measurements at Dunhuang,China

Vertical changes of aerosol concentration and size in the freetroposphere over the Asian desert areas were firstly observed using a balloon-borne optical particle counter at DunHuang, China (40°00N, 94°30E) (17 August and 17 October 2001, and 11 January 2002). In the free troposphere highly concentrated aerosol layers were frequentlyobserved, suggesting the importance of regional scale particletransportation over the Asian continent. Concentration ofparticles with a diameter larger than 0.15 m was about 5–10particles cm^-3 in the free troposphere.Particle number-size distribution in the free troposphereshows important contribution of super micron particles. Regionalscale transportation, in addition to diffusion of soil particlesfrom the lower atmosphere to the free troposphere through localand small scale air motions, is suggested by backward trajectoryanalysis of air masses containing super micron particles. The importance of horizontal transport of coarse size particles in the free troposphere was strongly suggested.Thickness of the boundary mixing layer, from distributions ofparticle concentration, was about 4 km in summer (17 August 2001)and apparently higher than the height of layers in fall (17 October2001) and in winter (11 January 2002), which suggest an active mixingof particles near the boundary in summer. In winter measurement(11 January 2002), strong inversion was found in the vertical profile of temperature, suggesting cold ground surface and vertically stable atmosphere near the ground.     

Biodegradability of Thermally Aged PHB,PHB-V,and PCL in Soil Compostage

The biodegradability of poly--hydroxybutyrate (PHB), poly--hydroxybutyrate-co-valerate (PHB-V) and poly--caprolactone (PCL) were examined following thermal aging in an oven for 192, 425 and 600 h. Different temperatures, 100, 120 and 140°C for PHB and PHB-V and 30, 40 and 50^oC for PCL were used to assess the influence of this parameter on biodegradation. The biodegradability tests were done in soil compostage at pH 11.0 and involved measuring the residual mass of polymer. Thermal analysis of the polymers was done using a differential scanning calorimeter (DSC). The melting temperature and crystallinity were also determined. Thermal ageing increased the biodegradability only for PHB at 120 and 140^oC, and there was no correlation between crystallinity and the biodegradation of the polymers.     

Electrosynthesis of κ-Carrageenan Complexes with Gelatin

Electrosynthesis at pH 9, 12, and 11 of -carrageenan–gelatin complexes from electrolytes containing the components at proportions varying from 1:5 to 5:1 provided complexes in the composition varying in a range from 1:10 to 1:1.8. Components were bound mainly electrostatically, although partial insolubility of complexes in 7 M aqueous urea pointed to a part of the complexes bound covalently. None of the performed tests except solubility could confirm formation of covalent complexes. The complexation of -carrageenan to gelatin significantly increased the thermal stability of carrageenan, whereas the thermal stability of gelatin increased rather insignificantly.     

Correlating the Spatial Distribution of Atmospheric Ammonia with δ15N Values at an Ammonia Release Site

A field ammonia (NH₃) release experiment and open top chambers containing moorland monoliths continuously fumigated with NH₃ or sprayed with NH₄Cl were used to assess the potential for using ¹⁵N values in determining the area of influence around a point NH₃ emission source. ¹⁵N values are being increasingly used as environmental tracers and we tested the hypothesis that the ¹⁵N signal from an NH₃ emission source is observable in nearby vegetation. Using modified monitoring devices, atmospheric NH₃ concentrations were found to decrease with distance from source, with ¹⁵N values also reflecting this trend, producing a signal shift with changing concentration. Open top chamber studies of ¹⁵N values of Calluna vulgaris (L.) Hull indicated a correlation with deposition treatments in current year shoots. Analysis of Calluna shoots from the NH₃ release showed a similar trend of ¹⁵N enrichment. Significant linear correlations between ¹⁵N and percent N in plant material were found, both in the controlled conditions of the open top chambers and at the NH₃ release site, illustrating the possible use of this technique in N deposition biomonitoring.     

Rheology of Lyocell Solutions from Different Cellulose Sources

Rheological measurements were used to characterize the behavior of lyocell solutions, i.e., cellulose dissolved in N-methymorpholine-N-oxide. Cellulose sources included dissolving pulp, kraft pulp, sugar cane fibers, and kenaf fibers. The dominance of viscous behavior, G values, over elastic behavior, G values, is affected by cellulose concentration and molecular weight. At lower concentrations and degrees of polymerization (DP), dissolving pulp solutions show viscous, inelastic behavior at low frequencies. At higher concentration and DP, dissolving pulp solutions are more elastic at higher frequencies. Solutions prepared with kenaf and sugar cane fibers show similar properties to those using pure dissolving pulp, and comparisons suggest the molecular weight and/or the presence of other substances such as lignin in the cellulose from these alternative sources affect the rheology.     

Synthesis of a block copolymer of poly(3-hydroxybutyrate) and poly(ethylene glycol) and its application to biodegradable polymer blends

A block copolymer {P[(R,S)-HB-b-EG]} of atactic poly[(R,S)-3-hydroxybutyrate] {P[(R,S)-HB]} and poly(ethylene glycol) (PEG) was prepared by the ring-opening polymerization of -butyrolactone in the presence of a macroinitiator (PEG/ZnEt₂/H₂O) which had been produced by the reaction of ,-dihydroxy PEG ( _n=3000) with ZnEt₂/H₂O (1/0.6) catalyst. The block copolymer ( _n=10,500, _w/ _n=1.2) was an A-B-A triblock copolymer comprising atactic P[(R,S)-HB] (A) and PEG (B) segments. The miscibility, physical properties, and biodegradability of binary blends of microbial poly[(R)-3-hydroxybutyrate] {P[(R)-HB]} with the block copolymer P[(R,S)-HB-b-EG] has been studied. The glass-transition temperature (T _g) data showed that the P[(R)-HB]/P[(R,S)-HB-b-EG] blend was miscible in the amorphous state. The P[(R)-HB] film became flexible and tough by means of blending with P[(R,S)-HB-b-EG] block copolymer. The enzymatic degradation of blend films was carried out at 37°C and pH 7.4 in a 0.1M phosphate solution of an extracellular PHB depolymerase fromAlcaligenes faecalis. The enzymatic degradation took place solely on the surface of the blend films.     

Comparison of the Chemical Composition of Mineral Particles Collected in Dunhuang,China and those Collected in the Free Troposphere over Japan: Possible Chemical Modification during Long-Range Transport

The Asian continent is recognized as one of the most important sources of mineral (or soil) particles. These particles have a large potential to effect global changes through the biogeochemical cycle of particulates and through radiative balance (IPCC Third Assessment Report, 2001). Therefore, comparison of particle compositions near the source region and those after long-range transport is important in understanding the long-range particle transport phenomenon. Individual aerosolparticles were collected in Dunhuang (40°09N; 94°41E), China. Particles were collected at the campus of the Meteorological Bureau of Dunhuang City (17 August 2001) and near the Mogao Grots, located approximately 30 km from Dunhuang (18 August 2001, 18 October 2001 and 13 January 2002) using a two-stage low-volume impactor. The morphology of individual aerosol particles and their elemental compositions were examined via a scanning electron microscope (Hitachi, S-3000N) equipped with an energy dispersive X-ray (EDX) analyzer (Horiba, EMAX-500). The particles collected at these locations were comprised primarily of minerals, with the exception of sulphateparticles in the submicron range that were contained in thesample collected on 18 October 2001 (likely, ammonium sulphate). The most abundant elements were found to be Si and Al. Approximately 46–77% of the collected particles were Si-richparticles (composed primarily of quartz and aluminosilicate),and 13–41% of the collected particles were Ca-rich particles,such as calcite (CaCO₃), dolomite (CaMg(CO₃)₂),and gypsum (CaSO₄2H₂O). The fractions of Fe-rich, Mg-rich, Ti-rich, K-rich, and Cl-rich were 3–10, 0–7, 0–3, 0–1, and 0–1%, respectively. Similar types of mineral particles were found in the free troposphere over Japan(Trochkine et al., 2002). A number of differences were found to exist between the particles collected in China and thosecollected in Japan, and these differences can be explained bychemical modification of the particles during transport fromChina to Japan.     

Miscibility and Biodegradability of Poly(Butylene Succinate)/Poly(Butylene Terephthalate) Blends

As one of the biodegradable polymers, the blend of poly(butylene succinate) and poly(butylene terephthalate) is dealt with in this study. In our previous work, it was demonstrated that PBS and PBT are immiscible not only from the changes of T _g but also from logG–log G plots. It is expected that the biodegradability of the blends could be improved by enhancing the miscibility. We tried to induce the transesterification reaction between two polyesters with various time intervals to enhance the miscibility of the blends. The extent of transesterification reaction was examined by ¹H-NMR. We utilized a dynamic mechanical thermal analyzer and a rotational rheometer to investigate the changes in miscibility. We also verified the biodegradability of PBS/PBT blends after the transesterification reaction by the composting method.     

Tree Leaf Biomarkers for Atmospheric Nitrogen Deposition

The aim of this paper was to investigate the effects of nitrogen (N) deposition on tree N cycling and identify potential biomarkers forNdeposition. Between April and October 2002 extensive fieldwork was undertaken at Mardley Heath in Hertfordshire. This woodland, located adjacent to the A1(M) motorway, is exposed to high levels of atmospheric nitrogen oxides from the traffic. Measurements of ¹⁵N, in vivo nitrate reductase (NR) activity, tissue, xylem and surface nitrate concentrations as well as N concentration and growth were made along a 700-m transect at 90° to the motorway. The ¹⁵N data show that oxidised N from the road traffic is taken up by nearby trees and is incorporated into plant tissues. Our measurements of NR activities suggest elevated rates close to the motorway. However, xylem sap, leaf tissue and leaf surface nitrate concentrations showed no differences between the roadside location and the most distant sampling point from the motorway. Taken together the ¹⁵N and nitrate reductase data suggest uptake and assimilation of N through the foliage.We conclude that for this lowland deciduouswoodland, tissue, xylem and surface measurements of nitrate are unreliable biomarkers for N deposition whereas ¹⁵N, growth measurements and integrated seasonal NR might be useful. The results also point to the benefit of roadside tree planting to screen pollution from motor vehicles.     

Detection of a Toxic Product Released by a Polyurethane-Containing Film Using a Composting Test Method Based on a Mineral Bed

The degradation of a film containing a 4,4diphenyl methane diisocyanate (MDI) poly(€-caprolactone)-based polyurethane was followed in a test system based on a mineral solid bed designed to facilitate analysis of break-down products released under composting conditions. The use of a mineral solid bed can help extraction and analytical procedures which could be hindered by the heterogeneous nature of compost. The fermentation conditions are typical of the composting environment and generate a powerfully degradative environment. The film fully disintegrated within 30 days of treatment. Analysis on the mineral bed extracts showed that: (i) about 40% of the initial polyurethane was still present in the bed extracts; (ii) this residue was strongly degraded in the poly(€-caprolactone) part, while the urethane part was almost completely recovered (from 80 to 95%, according to the measurement method); (iii) 4,4 diamino diphenyl methane (MDA), a very dangerous product of MDI, was released during biodegradation. The results indicate that a mineral bed can be employed to study degradation and metabolites formation in solid phase fermentation and that the MDI-based polyurethanes are not susceptible of a full degradation during composting and maintain the potential of a slow release of MDA into the environment after soil application.     

Study of Trace and Heavy Metals in Rural and Urban Aerosols of Uludağ and Bursa (Turkey)

The concentrations of heavy, trace elements and major ions measuredin the Uluda and Bursa aerosols were investigated to assess size distributions, spatial and temporal variability, sources and source regions affecting the composition of aerosols in Uluda and Bursa. A total of 81 samples were collected in two sites, one in Bursa city and another in the Uluda Mountain during two sampling campaigns. Daily samples were collected using a high volume sampler on Whatman 41 cellulose filters in Uluda, while three days interval samples were collected in Bursa using an automatic dichotomous sampler on PTFE Teflon filters. Samples were analysed for 15 trace and heavy metals (Al, Fe, Ba, Na, Mg, K, Mn, Ca, Cu), (V, Pb, Cd, Cr, Ni, Zn), and 4 major ions (SO₄ ^2-, NO₃ ^-, Cl^-), (NH₄ ⁺) using ICP-AES, GFAAS, HPLC and UV/VIS Spectrophotometer,respectively. In general, concentrations of the metals measured inUluda aerosols were lower than those in Bursa. The concentrations of crustal elements were higher in summer than winter, while anthropogenic elements had higher concentrations in winter than summer. Most of the mass of crustal elements was concentrated in the coarse mode while the mass of the heavy metals was concentrated in the fine mode. Factor analysis revealed four factors with sources including crustal, industrial and combustion. Back trajectory calculations were used to determine long range contributions. These calculations showed that contributions were mostly from European countries, former Soviet Union countries, Black Sea and North Africa.     

Novel Biobased Polyurethanes Synthesized from Soybean Phosphate Ester Polyols: Thermomechanical Properties Evaluations

Biobased polyurethanes from soybean oil–derived polyols and polymeric diphenylmethane diisocyanate (pMDI) are prepared and their thermomechanical properties are studied and evaluated. The cross-linked biobased polyurethanes being prepared from soy phosphate ester polyols with hydroxyl contents ranging from 122 to 145 mg KOH/g and pMDI within 5 min of reaction time at 150°C in absence of any catalyst show cross-linking densities ranging from 1.8 × 10³ to 3.0 × 10³ M/m³, whereas glass transition temperatures vary from approximately 69 to 82°C. The loss factor (tan ) curves show single peaks for all these biobased polyurethanes, thus indicating a single-phase system. The storage moduli (G) at 30°C range from 4 × 10⁸ to 1.3 × 10⁹ Pa. Upon postcure at 150°C, the thermomechanical properties can be optimized. Cross-link densities are improved significantly for hydroxyl content of 139 and 145 mg KOH/g at curing time of 24 h. Similarly, glass transition temperature (T_g) and storage moduli around and after T_g are increased. Meanwhile, tan intensities decrease as result of restricted chain mobility. Longer exposure time (24 h) induces thermal degradation, as evidenced by thermogravimetric analysis (TGA). The dynamic mechanical (DMA) analysis shows that postcure at 100°C for times exceeding 24 h also leads to improved properties. However, cross-linking densities are lower compared to postcure carried out at 150°C.