天津市文明生态村生活垃圾处理方案优选

根据天津市文明生态村生活垃圾的特点和组成成分,以垃圾的分类收集和分类处理为前提,采用费用-效益分析法和层次分析法,对填埋、堆肥和焚烧处理方案分别进行费用-效益分析和经济、技术、环境、政策综合分析。结果表明,堆肥和焚烧的费用-效益分析得分为0.96和0.786,填埋不产生效益;堆肥、焚烧和填埋的层次分析法得分为7.74、4.28和5.45,堆肥方案的得分最高,其次为填埋,天津市文明生态村生活垃圾宜采用堆肥+填埋处理方案。     

天子岭垃圾填埋场渗滤液的治理及其工艺改进

对杭州市天子垃圾填埋场采用普通活性污泥法自理垃圾渗滤液的治理效果及及其影响因素与运行费用进行了分析,在此基础上针对渗滤液处理中存在的问题提出了在工艺上加以改进的若干设想。     

我国城市固体废弃物现状及其处理处置规划探讨

综述了我国城市固体废弃物现状与特点，阐述了我国城市生活垃圾和工业固体废弃物发生、组成及其处理处置状况；指出我国城市固体废弃物处理主要存在欠帐太多、技术水平低下、经济拮据和认识与管理不够四个问题；对我国城市固体废弃物处理处置规划方法进行了探讨。     

城市生活垃圾处理方法及经济分析

本文通过对国内外城市生活垃圾处理处置技术和经济费用分析,认为焚烧法处理技术投资费用大,仅个别城市有条件采用;卫生填埋和堆肥技术处理生活垃圾技术设备简单,投资费用较少,垃圾处理量大,土地还可以重复利用,比较适合国情。     

医疗垃圾高压蒸汽消毒器设计

医疗垃圾是一种具有急性生物危害性的危险废物。医疗垃圾高压蒸汽消毒法是一种以饱和蒸汽或过热蒸汽为工质的二次污染物少、简便有效、投资省、运行费用低的处理方法。本文以湖南省长沙市为例 ,选 13 2℃ ,2 0 0kPa的过热蒸汽为工质 ,设计了一种用于医疗垃圾集中处理的高压蒸汽消毒器 ,并对其运行过程作了详细分析     

医疗垃圾高压蒸汽消毒器设计

医疗垃圾是一种具有急性生物危害性的危险废物。医疗垃圾高压蒸汽消毒法是一种以饱和蒸汽或过热蒸汽为工质的二次污染物少、简便有效、投资省、运行费用低的处理方法。本文以湖南省长沙市为例，选132℃，200kPa的过热蒸汽为工质，设计了一种用于医疗垃圾集中处理的高压蒸汽消毒器，并对其运行过程作了详细分析。     

农村环境综合整治方案实例

以四王村为例，介绍了农村环境综合整治的规划和方案设计，提出了环境综合整治的总体目标，并具体制定了水环境治理规划、生活垃圾治理规划、农业生产废弃物及人畜粪便处理综合利用规划、农业面源污染防治规划、村容村貌综合整治规划和生态发展规划，对农村环境综合整治具有较强的指导性。     

臭氧预氧化-BAF工艺深度处理垃圾渗滤液

以广东省江门市垃圾填埋场垃圾渗滤液为研究对象，对经SBR生化处理和聚合硫酸铁混凝后的垃圾渗滤液，采用臭氧-BAF(曝气生物滤池)工艺进行深度处理。该工艺优点在于：臭氧高级氧化技术使大分子有机污染物降解成二氧化碳和水，或者小分子有机污染物，有利于后继BAF的生化处理，且臭氧处理过后废水的色度明显降低，是废水处理的有效方法之一。而后采用曝气生物滤池对垃圾渗滤液进行进一步处理，对COD进一步去除。结果表明，当臭氧的加入量为150 mg/L，BAF停留时间＞4 h，出水COD低于85 mg/L，稳定达到国家GB 16889-1997《生活垃圾填埋污染控制标准》一级排放标准，臭氧氧化法处理每吨垃圾渗滤液的费用为4.8元。     

广州市餐厨垃圾不同处置方式的经济与环境效益比较

对广州市餐厨垃圾采用填埋、焚烧、综合处理3种处置方式的经济和环境效益进行了对比分析。结果表明,对于一座日处理能力为500t的餐厨垃圾处理厂而言,如果采用制取沼气和提炼生物柴油的综合处理方式,则年处置费用约为3833万元,年运输成本约为1825万元,年总收益(主要为出售生物柴油和发电)为7093万元,年净收益可达1435万元;一座日处理能力为500t的餐厨垃圾处理厂通过综合处理提炼的生物柴油若替代普通柴油使用,则每年可减少CO2排放量达110000t,而且餐厨垃圾厌氧发酵过程中产生的CO2也能被有效回收并加以利用。总体来说,综合处理方式既实现了餐厨垃圾的资源化有效利用,也达到了低污染排放的目的,经济与环境效益均达最佳。     

关于一种新型组合工艺处理垃圾沥滤液的探讨

负压蒸发浓缩技术和移动床生物膜反应器都是目前处理垃圾沥滤液的有效方法，两者相结合的处理技术，是一种高效、经济的新型技术组合，不但对沥滤液的处理效果明显，还解决了其他组合处理很难解决的问题，同时由于其处理单元少，管理方便，大大降低了管理、运行费用。     

Municipal solid waste management planning for Xiamen City,China: a stochastic fractional inventory-theory-based approach

In this study, a stochastic fractional inventory-theory-based waste management planning (SFIWP) model was developed and applied for supporting long-term planning of the municipal solid waste (MSW) management in Xiamen City, the special economic zone of Fujian Province, China. In the SFIWP model, the techniques of inventory model, stochastic linear fractional programming, and mixed-integer linear programming were integrated in a framework. Issues of waste inventory in MSW management system were solved, and the system efficiency was maximized through considering maximum net-diverted wastes under various constraint-violation risks. Decision alternatives for waste allocation and capacity expansion were also provided for MSW management planning in Xiamen. The obtained results showed that about 4.24 × 10⁶ t of waste would be diverted from landfills when p _i is 0.01, which accounted for 93% of waste in Xiamen City, and the waste diversion per unit of cost would be 26.327 × 10³ t per $10⁶. The capacities of MSW management facilities including incinerators, composting facility, and landfills would be expanded due to increasing waste generation rate.     

城市固体废物优化管理模型及管理成本影响因素研究

采用不确定性多目标动态优化模型,以优化环境和经济为目标,对中国佛山市固体废物管理进行规划.结果表明,该模型能大幅度降低固体废物管理与处理成本,节省财政支出.研究得出影响固体废物总处理费用的3个重要影响因素为产生量、回收量、处理容量.针对以上3个因素深入分析比较,提出了广义和狭义的综合处理技术,这是经济、环保、可行的技术策略:首先,将广义综合处理应用到实际中,采用分类回收、压缩收集、优化模型对废物进行合理配置,尽量降低经济成本和环境影响;其次,从狭义角度出发,采用多种技术组合,达到处理率高、资源化程度高、环境影响小的目的.     

Economic insight into municipal solid waste management in Mumbai: a critical analysis

Mumbai generates 6256 tonnes of waste every day, of which 17.20% is recyclable, but only a fraction of this is retrieved by rag-pickers. The economic value of the retrieved material is not considered by the Municipal Corporation of Greater Mumbai in valuing the waste management system as there is no retrieval mechanism except the informal rag-picking activity. Moreover, the cost of land used for the dumping of waste is also not accounted for. In the present paper, a comprehensive cost-benefit analysis for the present system of municipal solid waste management in Mumbai is carried out, with due consideration for implicit or hidden costs and benefits. Accounting for the implicit costs and benefits showed a difference of $6 per every tonne of waste disposal. This could show a considerable difference in policy development at the municipality level. Demand supply analysis proved that the present system of waste management would not yield a feasible market solution without private sector participation. With the increasing demand for improved waste management, private sector participation is essential and a Pigouvian tax is a necessary tool to make the private sector participation in solid waste management a success.     

采用零排放新工艺处理蚀刻废液

广州市某化工厂开发出一套对线路板蚀刻废液进行大规模集中资源化处理的零排放处理新工艺,该工艺通过在固相条件下生成氧化铜并用重力分选的方法将其分离出来,克服了原有工艺的缺陷,使废液中所有的成分能够在较低的处理成本下全部分离回收,无三废排出,达到了清洁生产的要求.对其工艺条件进行深入研究,通过正交试验优化了工艺条件.     

广州李坑生活垃圾填埋场周围植被现状调查与影响分析

为对垃圾填埋场封场后如何进行生态恢复研究提供基础资料，对超负荷运转中的广州市李坑生活垃圾填埋场周围的植被现状进行了调查，测算了物种量、覆盖度、污染状况等。同时运用植被覆盖度、结构、物种量和相对物种量等级评价以及对Zn、Cd等6种污染物的质量指数进行了评价。结果表明，所调查填埋场场区及灌区内有轻度污染，而场外与灌区外则相对较轻或无污染。     

Factors influencing regional municipal solid waste management strategies

Although regionalization policies have been proven as good strategies for municipal solid waste (MSW) management in previous studies, the optimal allocation of the waste stream is significantly affected by several influential factors, thus further investigation of the impacts of these factors on regional MSW management strategies is necessary. This study demonstrated the impacts of waste-to-electricity transformation coefficient (WETC) of incinerators and the fluctuation of unit tipping fees on the regional MSW flow/allocation of the Taipei metropolitan area from practical and economic perspectives. Real-world data and linear programming were used to obtain the least-cost alternatives under different scenarios. Analytical results indicated some treatment facilities had geographic superiority and their priorities changed when actual WETCs of incinerators were considered. Treatment facilities located at weighted centers were identified. The allocation of MSW among incinerators and landfills is affected by fluctuation of unit tipping fees within a certain range. Treatment facilities sensitive to the changes in unit tipping fees were also identified. Regression equations were also established that can estimate the cost items of MSW management scenarios with different unit tipping fees. The results of this study are very useful for daily basis regulation of MSW administration.     

An economic evaluation and assessment of environmental impact of the municipal solid waste management system for Taichung City in Taiwan

Municipal solid waste management (MSWM) is an important environmental challenge and subject in urban planning. For sustainable MSWM strategies, the critical management factors to be considered include not only economic efficiency of MSW treatment but also life-cycle assessment of the environmental impact. This paper employed linear programming technique to establish optimal MSWM strategies considering economic efficiency and the air pollutant emissions during the life cycle of a MSWM system, and investigated the correlations between the economical optimization and pollutant emissions. A case study based on real-world MSW operating parameters in Taichung City is also presented. The results showed that the costs, benefits, streams of MSW, and throughputs of incinerators and landfills will be affected if pollution emission reductions are implemented in the MSWM strategies. In addition, the quantity of particulate matter is the best pollutant indicator for the MSWM system performance of emission reduction. In particular this model will assist the decision maker in drawing up a friendly MSWM strategy for Taichung City in Taiwan. Implications: Recently, life-cycle assessments of municipal solid waste management (MSWM) strategies have been given more considerations. However, what seems to be lacking is the consideration of economic factors and environmental impacts simultaneously. This work analyzed real-world data to establish optimal MSWM strategies considering economic efficiency and the air pollutant emissions during the life cycle of the MSWM system. The results indicated that the consideration of environmental impacts will affect the costs, benefits, streams of MSW, and throughputs of incinerators and landfills. This work is relevant to public discussion and may establish useful guidelines for the MSWM policies.     

Factors Influencing Regional Municipal Solid Waste Management Strategies

Abstract

Although regionalization policies have been proven as good strategies for municipal solid waste (MSW) management in previous studies, the optimal allocation of the waste stream is significantly affected by several influential factors, thus further investigation of the impacts of these factors on regional MSW management strategies is necessary. This study demonstrated the impacts of waste-to-electricity transformation coefficient (WETC) of incinerators and the fluctuation of unit tipping fees on the regional MSW flow/allocation of the Taipei metropolitan area from practical and economic perspectives. Real-world data and linear programming were used to obtain the least-cost alternatives under different scenarios. Analytical results indicated some treatment facilities had geographic superiority and their priorities changed when actual WETCs of incinerators were considered. Treatment facilities located at weighted centers were identified. The allocation of MSW among incinerators and landfills is affected by fluctuation of unit tipping fees within a certain range. Treatment facilities sensitive to the changes in unit tipping fees were also identified. Regression equations were also established that can estimate the cost items of MSW management scenarios with different unit tipping fees. The results of this study are very useful for daily basis regulation of MSW administration.     

Economic evaluation of a landfill system with gas recovery for municipal solid waste management: a case study

Economic activity uses resources, which leads to waste generation. With rapid industrialisation and urbanisation, per capita solid waste generation has increased considerably. Solid waste generation data for last two decades shows an alarming increase. Owing to its improper and untimely collection, the transport and disposal of municipal solid waste poses a severe threat to various components of the environment and also to public health. This paper describes the merits and demerits of various technological aspects of solid waste management. Landfill technology, as it is the most widely employed and is regarded as the most suitable and simple mechanism, especially for tropical countries such as India, is emphasised. All possible costs and benefits and externalities are examined. A cost-benefit analysis of a landfill system with gas recovery (LFSGR) has been carried out for Mumbai city's solid waste, accounting for certain external costs and benefits, and found that it could make a huge difference of savings of about Rs. 6.366 billion (approx. $0.l40 billion) per annum with reference to the existing system of waste disposal.     

香港城市固体废物系统管理

本文以大量翔实的数据介绍了香港对城市固体废物的系统管理,即分类、收集、监测分析、处理和预测评价。香港环保署自８０ 年代开始对城市固体废物进行监测并系统管理。在全港设置了３ 个大型策略性填埋场、５ 个垃圾转运站、１ 个垃圾焚烧厂（１９９７ 年５ 月关闭） 和１个化学废物处理中心。目前,香港政府正筹建一个新的、技术先进的焚烧厂。从１９８６ ～１９９７年,这些废物处理设施处理全港废物量为８９６０ ～２４３００ｔ／ｄ,其中城市固体废物比例每年不等,最低为３０ ．７ ％ ,最高为６５ ．５ ％ 。１９９７ 年,这些废物中可循环再利用物接近５０ ％ ,出口部分达１２０ 多万吨,回收资金２０ 多亿港元。根据历年来城市固体废物量与本地生产总值（ＧＤＰ）和人口数量的密切相关性,预测出２０１１ 年城市固体废物人均产率为２ ．５６ｋｇ／ 人·ｄ, 城市固体废物量为１２８１０ ｔ／ｄ。城市固体废物系统管理紧迫而重要,香港的经验是值得我们借鉴的。