铅冶炼烟尘的物性分析及浸出性研究

采用XRF、XRD、激光粒度分析、DTA-TG、FTIR以及SEM-EDS等技术，对某铅冶炼厂烟尘（简称烟尘）进行了物性分析，并采用稀硫酸对烟尘进行了浸出性研究。分析结果表明：烟尘所含主要元素为Pb，Zn，Cd，Cl，S，As;烟尘是氧化物、硫酸盐、硅酸盐、硫化物和砷化物等物质的混合物，主要物相为ZnO，PbO，PbSO₄，CdO，CdS;烟尘颗粒大小不一，形状各异，多呈相互黏结或包裹状。实验结果表明：在ρ（硫酸）=120 g/L、浸出时间30 min、液固比（稀硫酸体积（mL）与烟尘质量（g）之比）20∶1、浸出温度60 ℃的条件下，Pb，Zn，Cd，As，Cl的浸出率分别达到0.16%，98.95%，49.36%，89.12%，99.31%。     

Metal mobilization from municipal solid waste incineration bottom ash through metal complexation with organic and inorganic ligands

As a first step in the development of ligand-assisted removal of heavy metals from municipal solid waste incineration bottom ash under alkaline conditions, ammonium nitrate, ammonium sulfate, ammonium acetate, ammonium oxalate, ammonium citrate, urea, and mixtures of ammonium salts and urea were examined to find which ligands could promote the leachability of elements, including heavy metals, and which elements could be mobilized through complexation. Ammonium citrate promoted the mobilization of Cr, Cu, Mn, P, Sb, and especially Fe. Ammonium nitrate accelerated Mg leachability significantly. Under the conditions used in this study, counter anions seemed to contribute mainly to the complexation. When a mixture of ammonium citrate and urea was utilized, a coexistence effect appeared on Fe mobilization. Although the correlation analysis of leaching test results showed a strong correlation among Cr, Cu, Fe, Mn, and P, X-ray diffraction analysis partially supported the correlation between Fe and Mn only.     

对县级供销社再生资源回收网络体系的设计与思考

目前,县级再生资源回收网络体系存在体系不健全、行业发展基础薄弱、回收企业经营管理落后、回收网点散乱、回收技术落后、回收资源范围小、再利用效率低等问题。县域经济实力增强、政策扶持和社会各界支持、资源回收利润合理,为县级供销社建设再生资源回收网络体系提供了发展机会。建立以村级回收站为基础、乡镇级分拣中心为支撑、县级再生资源集散交易市场为核心的三级再生资源回收网络体系。通过建设专业市场、鼓励龙头企业发展、强化市场监管、推进完善回收网络体系,以及政府政策规范、引导和扶持,从而推进再生资源回收网络体系建设。     

Capillary electrophoretic study of dibasic acids of different structures: Relation to separation of oxidative intermediates in remediation

Dicarboxylic acids are important in environmental chemistry because they are intermediates in oxidative processes involved in natural remediation and waste management processes such as oxidative detoxification and advanced oxidation. Capillary electrophoresis (CE), a promising technique for separating and analyzing these intermediates, has been used to examine a series of dibasic acids of different structures and conformations. This series includes malonic acid, succinic acid, glutaric acid, adipic acid, pimelic acid, maleic acid, fumaric acid, phthalic acid, and trans, trans-muconic acid. The CE parameters as well as structural variations (molecular structure and molecular isomers, buffer composition, pH, applied voltage, injection mode, current, temperature, and detection wavelength) that affect the separations and analytical results have been examined in this study. Those factors that affect the separation have been delineated. Among these parameters, the pH has been found to be the most important, which affects the double-layer of the capillary wall, the electro-osmotic flow and analyte mobility. The optimum pH for separating these dibasic acids, as well as the other parameters are discussed in detail and related to the development of methods for analyzing oxidation intermediates in oxidative waste management procedures.     

Predicting the mobility of Zn, Fe, Cu, Pb, Cd from roasted sulfide (pyrite) residues—A case study of wastes from the sulfuric acid industry in Sweden

Leachates from roasted sulfide residues, which are the wastes from the production of sulfuric acid at Falun, Sweden, have low pH and high concentrations of Zn, Fe, and SO₄. The minerals are mainly hematite and maghemite and, because the various sulfides in the feed behave differently during the roasting process, the residual sulfides minerals are pyrrhotite and sphalerite. Oxidation of the residual sulfides contributes acidity, Zn, Fe, Cu, Cd, and sulfate to the effluents from the waste deposits. The dissolution of sphalerite is most likely accelerated in acid solution rich in Fe (III). The formation of Pb-sulfate coatings on galena may provides an armoring effect which slows the oxidation of the galena. Residual sulfides are source phases controlling long-term contaminant release. Other source minerals for Zn, Fe, Pb, Cu, Cd and SO₄ in the effluents are iron oxides which retained percentage quantities of SO₄, roast-derived alteration rims of Zn oxides on sphalerite, alterated silicates formed during the roasting process, and secondary minerals (e.g. Zn, Fe, Cu sulfates, iron hydroxides) that were precipitated by in-site oxidation in the waste dumps. The Zn, Fe, and Cu sulfates most likely control short-term changes in the chemistry of the leachate, while Pb concentration in the leachates may be controlled predominantly by Pb-release from the altered silicates. The mineralogical and geochemical data provide fundamental information essential for the remedial management of this type of industial waste.     

Odor compounds from different sources of landfill: characterization and source identification

This study investigated the odor compounds from different areas in a landfill site, which included the municipal solid waste (MSW)-related area, the leachate-related area and the sludge-related area. Nine sampling points were placed and 35 types of odorous substances were measured and quantified from these grabbed samples. The results showed that the main odorous substances emitted from landfill site were styrene, toluene, xylene, acetone, methanol, n-butanone, n-butylaldehyde, acetic acid, dimethyl sulfide, dimethyl disulfide and ammonia. In the MSW-related area, the highest concentrations of oxygenated compounds were observed at the gas extraction wells (GW), while sulfur compounds were rare. Ammonia in the sludge-related area was very abundant. Sludge discharge area (SD1) and sludge disposal work place (SD2) were representative points of pre- and post-drying, in which the characterizations of the emitted odorous gas were different. After chemical drying, the concentration of ammonia increased, whereas those of volatile fatty acids and sulfur compounds decreased. In the leachate-related area, relatively low concentrations of all those odorants were detected in leachate storage pool (LS), which may be due to the enclosure operation of the leachate storage pool. Using principal components analysis and cluster analysis, GW, SD1 and SD2 were distinguished from the other sampling points. The typical odorants in GW were acetaldehyde, ethyl benzene, xylene, methylamine and dimethyl formamide. The typical odorants in SD1 were methyl mercaptan, valeric acid and isovaleric acid, while those in SD2 were carbon disulfide, acetone, 3-pentanone, methanol and trimethylamine. The typical odorants in other sampling points were hydrogen sulfide, n-butylaldehyde and acetic acid.     

Volatile Organic Compounds Selection for Incorporation in Photochemical Mechanisms and the Development of Secondary Pollution Reduction Strategies

In the present work a method for the evaluation of the importance of the VOCs species is presented, aiming to provide criteria for the incorporation of these species into atmospheric photochemical mechanisms and for the successful application of secondary pollution reduction strategies. According to the method presented here, the species can be divided into more important and less important ones, taking into account their mixing ratios and emission values in combination with their reactivity. For this classification three quantitative and one qualitative criteria were introduced. Overall, it is concluded that alkenes with more than a few carbon atoms in their chain appear to be more important in urban and suburban areas, while in background conditions the alkanes, having the smaller chain (ethane, propane), become more important. In the case of alkenes there is no clear species classification, except for the biogenically emitted compounds, isoprene and limonene. In general, more important alkenes appear to be those with the smaller chain (ethene, propene, butene). Most abundant aromatics are benzene, toluene, and xylene. In background conditions higher aromatics are also important, especially 1,2,3-, 1,3,5-, and 1,2,4-trimethylbenzene. The most important carbonylic compounds are formaldehyde, acetaldehyde, and acetone. Finally, taking into account the results mentioned above, a new photochemical mechanism was developed. The species and species groups used in the proposed mechanism are: ethane, higher alkanes, ethene, propene, 2- butene, 1-alkenes, 2-alkenes, higher alkenes, benzene, toluene, m-, o-, p-xylene, 1,3,5-, 1,2,3-, 1,2,4-trimethylbenzene, higher aromatics, formaldehyde, acetaldehyde, higher aldehydes, isoprene, limonene, and other biogenic VOCs.     

Expect the best but plan for the worst: Negotiating contracts for remediation services

The risks associated with environmental remediation projects are of concern to engineers, consultants, contractors, owners, and the public. The cost, scheduling, and other uncertainties inherent in performance of construction at sites contaminated by hazardous substances dictate caution with respect to contract terms. Further, the possibility that conditions will be exacerbated by the work, or the public or workers exposed to on-site substances, makes remediation projects of particular concern to those who will be held accountable for the effects and impacts of such substances. This article discusses particularly important contractual issues and suggests approaches for liability allocation and incentives. Practical, effective, realistic approaches to management of environmental remediation are presented, including the form of contract utilized, negotiated terms, attention to contractor selection and management, and the parties' relative economic strength.     

《循环经济促进法》施行效果评估分析

《循环经济促进法》正式施行以来,循环经济法规制度体系逐渐完善,循环经济发展模式日趋成熟,循环经济试点工作进展显著,催生了一批符合循环经济要求的新技术和工艺。但是也存在着循环经济发展地区间尚不平衡,配套法规规章和规范性文件尚不健全,支撑体系尚较薄弱,激励措施和相关政策有待完善等问题。为此,要抓紧制定完善配套法规、规章和标准,进一步理顺体制机制,加快出台循环经济发展规划和经济激励政策,强化关键技术研发,全面推广循环经济发展典型模式,积极培育循环经济服务产业,加快相关支撑体系建设。     

Green algae of the genus Spirogyra: A potential absorbent for heavy metal from coal mine water

Algae have considerable capability for absorbing heavy metals from wastewaters and are considered an effective treatment technology. Heavy metal absorption from coal mine water from the Bhowra Abandoned mine (open cast mine) and the Sudamdih Shaft mine (underground mine waters), both located in Dhanbad, India, by cells of Spirogyra was studied at different dilutions (100 percent, 80 percent, 60 percent, 40 percent, and 20 percent). In the present study, the following 18 metals were selected for analysis: aluminium (Al), arsenic (As), silver (Ag), barium (Ba), beryllium (Be), bismuth (Bi), cadmium (Cd), cobalt (Co), chromium (Cr), cesium (Cs), copper (Cu), iron (Fe), gallium (Ga), indium (In), potassium (K), manganese (Mn), nickel (Ni), and vanadium (V). Accordingly, Al and K were found to be higher in concentration with respect to selected metals for both mine waters. The biosorption study revealed that higher amounts of Al, Bi, Co, Cs, Fe, Ga, Mn, Ni, and V were absorbed by algal biomass at 100 percent concentration from both mine waters. The maximum uptake of Cu, As, and Cd was measured at 60 percent, 40 percent, and 20 percent, respectively, for the Bhowra Abandoned mine water. The biosorption equilibrium study revealed that Ag, Al, Ba, Be, Bi, Co, Cr, Cs, Fe, Ga, In, K, Mn, Ni, and V were maximally absorbed by algal biomass at 100 percent concentration from Bhowra mine water, while the maximum uptake by the algal biomass measured for the Sudamidh coal mine water was for Al, As, Bi, Cu, Fe, and Mn at 100 percent concentration. The different physicochemical characteristics of mine water and drinking water standards was also studied. Accordingly, total dissolved solid and chemical oxygen demand concentrations exceeded the drinking water standards for water samples collected from both mines.     

When the Going Gets Tough,Communities Believe It's Time to Optimize and Adapt

The people who live in the communities where complex groundwater sites are located are as diverse as the country itself, but those who fight for the cleanup of our groundwater recognize that total cleanup may be difficult, if not impossible, in our lifetimes. Still, as explained in a December 2013 joint letter to US EPA, we want those who are responsible for environmental protection, be they polluters, developers, or regulatory agencies, to try harder before admitting defeat. In Mountain View, California, community activists have developed criteria for the adaptive cleanup of the Moffett‐MEW Regional Plume of TCE groundwater contamination that emphasizes areas with high contaminant mass, source areas, locations that reduce the need for long‐term vapor intrusion mitigation, properties where the detectable plume encroaches on residential areas, schools, and other sensitive uses, and areas planned for reuse. In many other communities, trust is the key to developing community support for remedial strategies. Communities that are listened to tend to feel more empowered. Empowered communities tend to offer more constructive advice. Decision makers tend to listen to communities that offer constructive advice. In summary, when the cleanup going gets tough, empowered communities believe that it is time to optimize and adapt, not to give up. © 2014 Wiley Periodicals, Inc.     

The current situation of solid waste management in China

With economic development, the quantity of solid waste is increasing rapidly in China; the total quantities of municipal solid waste (MSW), industrial solid waste (ISW), and hazardous waste (HW) in 2002 were 136.5 million tons, 945 million tons, and 10 million tons, respectively. In 2002, the quantity of MSW disposed of was 74.04 million tons, 89.30% of which was landfilled, 3.72% was incinerated, and 6.98% was composted. There are currently 651 disposal facilities for MSW in China. Mining gangue is the largest component of ISW, making up 27.5% of the total. In the Chinese industrial sector, the coal mining and processing industry contributed most to the total quantity of ISW, with 16.0% of the total quantity of ISW generated by this sector. In total, 44% of HW was recycled, 27% was stored, 13.5% was disposed of, and 15.4% was discharged. Of the total HW generated, 40% was produced by the chemical materials and chemical products industry. Five categories of HW, i.e., waste alkali, waste acid, inorganic fluoride waste, copper waste, and inorganic cyanide waste, made up 57.8% of the total HW generated. Solid waste pollution has become a huge challenge faced by those involved in Chinese environmental management, but this can be seen as an opportunity to improve environmental quality. This article introduces the strategies taken to improve solid waste management in China.     

Chemical properties of heavy metals in typical hospital waste incinerator ashes in China

Incineration has become the main mechanism for hospital waste (HW) disposal in China after the outbreak of Severe Acute Respiratory Syndrome (SARS) in 2003. However, little information is available on the chemical properties of the resulting ashes. In the present study, 22HW ash samples, including 14 samples of bottom ash and eight samples of fly ash, were collected from four typical HW incineration plants located across China. Chemical analysis indicated that the HW ashes contained large amounts of metal salts of Al, Ca, Fe, K, Mg, Na with a concentration range of 1.8-315gkg(-1). Furthermore, the ashes contained high concentrations of heavy metals such as Ag, As, Ba, Bi, Cd, Cr, Cu, Mn, Ni, Pb, Ti, Sb, Sn, Sr, Zn with a vast range of 1.1-121,411mgkg(-1), with higher concentrations found in the fly ash samples. Sequential extraction results showed that Ba, Cr, Ni and Sn are present in the residual fraction, while Cd existed in the exchangeable and carbonate fractions. As, Mn, Zn existed in the Fe-Mn oxide fraction, Pb was present in the Fe-Mn oxide and residual fractions, and Cu was present in the organic matter fraction. Furthermore, toxicity characteristic leaching procedure (TCLP) results indicated that leached amounts of Cd, Cu and Pb from almost all fly ash samples exceeded the USEPA regulated levels. A comparison between the HW ashes and municipal solid waste (MSW) ash showed that both HW bottom ash and fly ash contained higher concentrations of Ag, As, Bi, Cd, Cr, Cu, Pb, Ti, and Zn. This research provides critical information for appropriate HW incineration ash management plans.     

How to engineer biological processes that neutralize hazardous wastes

Because bioremediation must satisfy the fundamental biological tastes of specific organisms, environmental engineers must create a nutritious waste stew. Waste-hungry organisms need a proper electron acceptor. Oxygen is preferred; if it is not available, nitrate, sulfate, or carbon dioxide may work. The waste itself is a source of carbon and energy. Macronutrients are next—including phosphorus, nitrogen, and certain metals, if they are not already present in the wastewater—as well as micronutrients. Other factors, including pH, temperature, aeration, and mixing must suit the organisms' natural temperaments. This article explores how bioengineers can combine these ingredients in precise quantities and proportions in both conventional and innovative aerobic and anaerobic bioprocesses, including in situ treatment and even composting, to make the organisms healthy, happy, and inexpensive.     

A bibliometric analysis of anaerobic digestion for methane research during the period 1994–2011

This study uses a bibliometric approach in identifying global research trends related to the anaerobic digestion of biomass for methane production using related literature in the Science Citation Index Expanded database, retrieved from the ISI Web of Science. The data used covers the period 1994–2011. The articles acquired from such literature were concentrated on the general analysis by scientific output, the research performances by countries, institutes, and collaborations, and the research trends by the frequency of author keywords, words in title, words in abstract, and ‘KeyWords plus’. The research outputs of anaerobic digestion for methane had notably increased in the field of environmental sciences, biotechnology and applied microbiology, environmental engineering, energy and fuels, and microbiology, while increased slightly in water resources. The USA with most publications and China with the highest growth rate were compared. Finally, author keywords, words in title and ‘KeyWords plus’ were analyzed contrastively, with the recent hotspots provided.     

Recycling plastics from automotive shredder residues: a review

Automotive shredder residue (ASR) is an inevitable by-product of car recycling, i.e. removal of all liquids and hazardous or valuable components from the car and shredding of the hulk, followed by the recovery of steel, iron, and non-ferrous scrap. The European Union (EU) ELV Directive requires attaining higher recovery and recycling rates, resulting in a reduction of the amount of ASR going to landfill. The most plausible methods to achieve a considerable reduction of ASR are as follows: either recycling of separated materials and dismantled bulky parts, such as bumpers, dashboards, cushions, and front and rear windows, or else systematic sorting of the commingled and size-reduced materials, resulting from shredding. After a brief comparison of the actual situation in the EU, the USA, and Japan, the characteristics of actual ASR are reviewed, as well as some of the most prominent efforts made to separate and recycle specific fractions, such as polyolefins, ABS, or polyurethane. Attention is paid to some major players in the EU and to some of the pitfalls that besiege these ventures.     

Microbial bioremediation of Azo dyes: An environmentally sustainable technology

Azo dyes, which are the most commonly used dyes in the textile industry, are aromatic compounds with N═N– groups. The treatment of these pollutants has been receiving considerable attention due to their persistence and release of dyes into the environment. The existing treatment approaches are not only expensive but also result in the production of concentrated sludge, which creates a secondary disposal issue. Under particular ecological conditions, a variety of microbes, including bacteria, fungi, algae, and yeasts, can not only decolorize numerous dyes but can also degrade them. In this respect, microbial degradation is a successful, cost-effective, biologically friendly, and ecologically sustainable treatment strategy. This review paper discusses research articles identified in the ScienceDirect bibliographic database for the last 10 years (from January 1, 2010 to June 29, 2022). Only the most appropriate research articles were included in the review process which was identified by searches with keyword phrases Azo-dye degradation with bacteria, fungi, algae, yeast, and microbial consortia. The review paper also emphasizes the constraints that persist and the future scope for the degradation of dyes via genetic engineering.     

Transformation of phthalates in young landfill cells

Phthalic acid diesters are additives in a variety of materials that can end up in landfills. Leachates from a series of full-scale young landfill cells were analysed over time for dimethyl, diethyl, dibutyl, butylbenzyl, and di(2-ethylhexyl) phthalate (respectively designated DMP, DEP, DBP, BBP, and DEHP), and their corresponding monoesters monomethyl, monoethyl, monobutyl, monobenzyl, and mono(2-ethylhexyl) phthalate (MMP, MEP, MbutP, MbenzP, and MEHP, respectively), as well as o-phthalic acid (PA). One landfill cell was created in each of three consecutive years by deposition of the same type of waste in July and August. The pH, volatile fatty acids (VFAs), and total organic carbon (TOC) were measured to characterise development of the degradation phases in three landfill cells, which revealed early acidogenic to initial methanogenic stages. Analysis of the phthalate compounds showed that observed concentrations of the degradation products were below the detection limit in the acidogenic leachates but exceeded concentrations of their corresponding diesters in leachates from cells in the initial methanogenic phase. Maximum and average concentrations of phthalic acid were 50 and 23 mg/l, respectively, and the corresponding values for the other phthalates were 430 and 27 microg/l. The concentrations of all phthalates decreased during the establishment of stable methanogenic conditions.     

Use and disposal of large home electronic appliances in Vietnam

In this study, e-waste flows of five large home appliances (color televisions, refrigerators, washing machines, personal computers, and air conditioners) in Vietnam are investigated. A social survey was performed to investigate the situation on using appliances in households as well as on the disposal of appliances by the first users. Future quantities of e-waste were estimated using a model that combines use of the Weibull distribution, the logistic function, and the population balance model. It was forecast that about 3.86 million appliances, or 114 000 tons, will be discarded in 2010, and about 17.2 million appliances, or 567 000 tons, in 2025, showing a rapid increase of e-waste in the near future.     

萘降解菌的筛选及其对多环芳烃的降解

从柴油污染土壤中筛选分离出一株萘降解菌N-3,进行了菌种鉴定及萘双加氧酶基因(nah)验证,并考察了该菌对不同种类多环芳烃(PAHs)的降解能力及降解过程中脱氢酶活性的变化。实验结果表明:该菌为铜绿假单胞菌(Pseudomonas aeruginosa),含有nah基因;当分别对液体培养基中质量浓度为50 mg/L的萘、菲、蒽、芘、芴降解84 h时,菌株N-3对萘、菲、蒽、芘、芴的降解率分别为28.81%,34.83%,36.65%,27.50%,23.47%。菌株N-3的脱氢酶活性与其对不同PAHs的降解率呈一定的正相关性。该菌不仅能有效降解萘,且对其他种类PAHs也有一定降解作用。