广州城市土壤砷的含量及其污染评价

采集广州市城市土壤表层(0～10 cm)426个样品,研究土壤As的含量及其分布特征,采用单因子污染指数评价土壤的As污染状况.结果表明,广州城市土壤砷质量比变幅为1.40～144 mg·kg~(-1),平均值为17.4 mg·kg~(-1).各行政区中,土壤砷平均含量和中值均是越秀区和荔湾区最高;各功能区中土壤砷平均含量以城市公园为最高.根据污染指数判断,有37%土壤样品受到不同程度的砷污染,各行政区中越秀区和荔湾区土壤砷污染最严重,各功能区中城市公园土壤砷污染最严重.城市历史和工业活动与城市土壤砷污染密切相关,建议密切关注城市公园土壤砷污染对人类健康和城市环境质量的影响.     

Challenges in risk management in multi-company industrial parks

The trend of companies focusing ever stronger on their core businesses has led to outsourcing of certain activities, e.g. maintenance, and even to selling out parts of industrial plants. This is the case also in Finland. Clusters of neighbouring companies, commonly called industrial parks, have been formed. In these multi-company parks safety and environmental responsibilities are not always clear and the risk map has changed. It has become evident that Finnish legislation has not followed this development of the industrial sector and the formation of industrial and technology parks.A Finnish project on the safety in chemical industrial parks has studied how safety and environmental issues can be best managed in multi-company chemical parks, and how the current legislation in Finland supports companies facing problems accentuated in or specific to industrial parks. The outcome outlines the identified challenges as well as the benefits of cooperation between the independent companies in industrial parks.     

Planning an Emergency Response Centre in Southern Taiwan Science Park

Since the 1980s, various types of accidents, such as fire, explosion, and toxic release, have occurred in science parks (SC_s) in Taiwan. The aftermath included financial losses, damaged reputations, business and operation interruption, property damage, and loss of lives. Considering loss prevention, this study plans an emergency response centre (ERC) in order to properly and proactively cope with incidents occurring in the Southern Taiwan Science Park (STSIP) since its inception in 1996. This article also design and promulgate the use of central monitoring system (CMS) between the ERC and various plants located in the STSIP. With a view to alleviating hazards, the integrated CMS could comprehensively bring a safer environment to all workers and staff at STSIP. Only through the reviews of table-top or functional exercise and real accidents, a comprehensive, fail-safe, and real-life system could be establish to lessen the hazards in STSIP.     

合流制雨水泵站溢流污水消毒试验研究

论述了合流制排水系统污水溢流消毒处理的必要性。提出采用粪大肠杆菌群数≤104个/L作为污水消毒的卫生学指标。试验结果表明,达到CSO紧急消毒要求的几种氧化性消毒剂最佳投加量为次氯酸钠30mg/L,次氯酸钙25mg/L,二氧化氯20mg/L(均以有效氯计);二氧化氯>次氯酸钙>次氯酸钠>双氧水。     

Coal dust emissions: From environmental control to risk minimization by underground transport. An applicative case-study

Coal dust emission from open coal storage parks and handling plants can represent a significant part of the overall atmospheric emission contribution in different industrial activities, such as power stations or coke production plants. The emissions are strictly connected to technical characteristics of the handling system, chemico-physical properties of coal and environmental conditions. In this paper, we present a full-scale operational solution to the problem of limiting coal dust emissions during transportation from the harbor site to the final utilization plant. To this end, a simple mathematical framework is developed in order to evaluate explosion risk inside the enclosure and set-up proper technical and managerial layers of protection suitable to minimize the risk.     

二恶英的毒性及环境来源

介绍了二恶英的结构、理化性质、毒性和环境来源.二恶英是由2个或1个氧原子联接2个被氯取代的苯环组成的三环芳香族亲脂性固体有机化合物,非常稳定,难以自然降解,是目前发现的无意识合成的副产品中毒性最强的化合物,已经成为当今环境界和国际媒体关注的热点.其来源可分为工业来源和非工业来源,工业来源包括有机氯化学品的生产与纸浆氯气漂白过程、固体废物焚烧、热电以及金属生产等,非工业来源包括汽油,家庭固体燃料(木材和煤)以及木制品和家庭废物等的不完全燃烧、光化学反应和生化反应等.     

化工园区安全规划发展历史回顾

系统回顾了化工园区安全规划的发展历史,简要介绍不同国家化工园区安全规划的分区制思想以及相应的法律法规要求。以1970年代中期为界,化工园区安全规划历史大体可分为两个阶段。第一阶段基本确立了土地利用规划分区制的思想,风险越大,工业活动就建设在距人居环境越远的区域。但由于没有量化的理论和方法支持,因此,不能准确确定合适的安全距离。第二阶段从科学的土地利用规划开始并得益于定量风险评价的日趋成熟和广泛使用。由于能够定量计算出比较准确的安全距离和可承受风险,因而可以更好地进行工业活动分区和安全规划。目前单纯基于风险的安全规划暴露出一定的局限性,人们不仅要考虑工业活动的潜在风险,而且需要综合考虑经济、社会、环境、生态以及人文历史等诸多因素,因此,急需研究能够综合处理复杂问题的安全规划理论和方法。回顾历史并分析和比较,笔者认为,科学的安全规划是预防重特大事故的根本措施之一,健全的法制基础是实施安全规划的必要保障,风险评价技术是实施安全规划的有力武器。取得的研究成果对我国化工园区以及其他工业园区的建设具有一定的借鉴和启迪作用。     

我国工业园区环境管理问题及管控方法的研究进展

我国工业园区的发展道路上充满了对环境破坏和资源滥用的争议,工业背景下的污染事件层出不穷,如何做到经济与环保统筹兼顾迫在眉睫。本文整理了我国工业园环境管理主要存在的几大问题——规划布局问题、环境管理问题、环境污染问题、预警监测问题及公众环保意识问题并从模式创新和科技支撑两个角度介绍了目前主流的工业园环境管控对策。最后在此基础上对未来园区的发展方向进行展望,以期为后续有关工业园环境风险管控的研究提供参考。     

厦门岛内不同功能区土壤与灰尘重金属污染的特征及评估

以厦门岛内城市表层灰尘和土壤为研究对象,系统考察了不同功能区(商业区、风景区、工业区、居住区)表层灰尘和土壤中典型重金属Cr、Cu、Cd和Zn的质量比水平和分布情况,采用单因子污染指数法和综合污染指数法评价其污染程度,并分析它们的相关性及可能来源。用综合污染指数法得出土壤重金属污染强度从大到小依次为工业区(7.8)、商业区(4.9)、风景区(3.8)、居住区(3.5),灰尘的污染强度顺序为工业区(4.5)、商业区(3.9)、居住区(2.2)、风景区(2.1)。单因子污染指数法结果表明,各功能区土壤及灰尘都受到了重金属污染(Pi1),且与综合污染指数法得到的污染强度顺序类似,在土壤方面,商业区所有元素,风景区除Cr外,工业区除Pb、Cd外,居住区的Cu、Pb、Zn都达到了重度污染(Pi3);对于灰尘,商业区和工业区的Cu、Zn均达到了重度污染。相关性分析结果表明,各功能区的元素间无负相关关系,表明各元素间没有显著的抑制关系。从总量上看,土壤比灰尘中重金属质量比更高。最后对比分析了我国其他城市与厦门市的土壤重金属质量比。     

Understanding and eliminating pressure fluctuations in an extended chlor-alkali plant due to the size detail of seal pots: A design correlation

When chlorine lines from a new caustic soda plant were added to chlorine lines from an older plant that used the same chlorine compression and liquefaction systems, we encountered abnormal pressure fluctuations on the chlorine side of the new plant. These fluctuations were being transmitted to the chlorine cycle in the older plant, posing a safety hazard in both facilities. After checking the pressure control systems, a design correlation for positive-pressure seal pot was observed and it was found from the inconsistency in the sizes of those equipments in the two plants. The problem was solved by reducing the diameter of the chlorine pipeline in the positive-pressure seal pot of the new plant. After implementing this solution, pressure fluctuations were fully removed, and satisfactory pressure control was attained in both plants.     

气体ClO2对室内空气的消毒研究

气体ClO2与其他常用过氧化物消毒剂和含氯消毒剂在空间消毒方面比较有诸多优势.气体ClO2对各种微生物具有很好的杀菌消毒作用,而且不会产生有毒、有害的氯化物,较之液态ClO2具有更好的扩散性、穿透性和使用均匀性,特别适用于对大面积环境微生物的杀菌消毒.     

突发公共卫生事件下公交暴露风险辨识方法:以深圳应对新型冠状病毒肺炎为例

为定量评估突发公共卫生事件下的公交暴露风险,基于公交线网、交通分析区及新型冠状病毒肺炎(COVID-19)疫情信息等多源数据,考虑公交站点、交通分析区及疫情场所3种研究尺度,集成公交网络结构拓扑模型、公交网络中心性模型及核密度分析等空间分析方法,提出公交暴露风险的多尺度辨识方法,并以深圳市为例进行验证。结果表明:公交站点暴露风险在空间上呈现多中心—圈层结构,较高及高暴露风险站点多为交通枢纽、商场等,占比达26.40%;较高及高暴露风险交通分析区主要分布在工业、商业聚集区及居民点密集区,占比达32.84%;较高及高暴露风险疫情场所主要集中在城市核心区域,占比为28.92%。     

A simplified steady-state model for air,water and steam curtains

Curtain mitigation systems are modeled here since they have experimentally shown their efficiency in reducing the concentration of certain toxic gases within dense gas clouds. Air, water and steam are analyzed in a model as the physical barriers to decrease the gas concentration. The model, developed for a steady-state mitigation process, is based on the mass, energy and momentum conservation laws. Concentration estimations during the dispersion before and after the mitigation are performed with a SLAB type model. A sensitivity analysis for each model is given to detect which variables have bigger effects. A release of chlorine is used as an example and the results are calculated in a prototype developed in Visual C++, where the model is solved using the Runge–Kutta 4th order method. The results include the effects of composition, speed, temperature and height of the releasing point as well as a comparison with CFD simulations. The proposed model is simplified and it cannot reproduce eddy effects but it is fast and robust enough. The model provides a set of equations that can be used in numerical problems where explicit derivatives are required, e.g. optimizations procedures.     

Lithium ion battery energy storage systems (BESS) hazards

There has been an increase in the development and deployment of battery energy storage systems (BESS) in recent years. In particular, BESS using lithium-ion batteries have been prevalent, which is mainly due to their power density, performance, and economical aspects. BESS have been increasingly used in residential, commercial, industrial, and utility applications for peak shaving or grid support. As the number of installed systems is increasing, the industry has also been observing more field failures that resulted in fires and explosions. Lithium-ion batteries contain flammable electrolytes, which can create unique hazards when the battery cell becomes compromised and enters thermal runaway. The initiating event is frequently a short circuit which may be a result of overcharging, overheating, or mechanical abuse. During the exothermic reaction process (i.e., thermal runaway), large amounts of flammable and potentially toxic battery gas will be generated. The released gas largely contains hydrogen, which is highly flammable under a wide range of conditions. This may create an explosive atmosphere in the battery room or storage container. As a result, a number of the recent incidents resulted in significant consequences highlighting the difficulties on how to safely deal with the hazard. This paper identifies fire and explosion hazards that exist in commercial/industrial BESS applications and presents mitigation measures. Common threats, barriers, and consequences are conceptually shown and how they would be identified in a hazard mitigation analysis (HMA). Mitigation measures that can be implemented to reduce the risk of a fire or an explosion are discussed. The presented information is intended to provide practical information to professionals and authorities in this fairly new industry to assure that prevention and mitigation strategies can be effectively implemented and that the regulatory requirement of the HMA can be met.     

Assessment of the Consequences of Accident Scenarios Involving Dangerous Substances

This paper highlights major steps in the procedure for evaluating the consequences of accidents involving dangerous substances, especially during the storage, and loading/unloading activities. The procedure relies on identifying accident scenarios that could be encountered at particular plants, followed by a modelling of these scenarios by means of available modelling systems. Finally, the resultant outcomes are identified, together with their effects on both people and property. The resources needed to perform this procedure are discussed, in order to clarify the roles of plant operators, external experts and other institutions when evaluating any accident consequences. Four examples, all relevant in industrial practice, are given in order to illustrate the procedure: the releasing of liquified petroleum gas, flammable organic solvents, toxic chlorine, and oil fuels. The results of these studies may be used for a quick order-of-magnitude estimation of accidents consequences.     

The use of water sprays for mitigating chlorine gaseous releases escaping from a storage shed

Accidental releases of toxic gases in partially confined spaces, like a storage shed, can sometimes be controlled by water sprays. This paper presents the results of experimental field tests during which various water sprays were used to mitigate chlorine gaseous releases. The releases (source strength: 1–4 kg/min) simulated a loss of containment occurring at an industrial chlorine storage installation (5 m³). The mitigation performances of different water sprays were investigated for diverse configurations, and under various atmospheric conditions. The best chlorine concentration reduction was achieved close to the source by a mobile upward water spray, with a maximum concentration reduction of a factor 10 at a distance of 5 m downstream from the source, and for a release flow rate of about 2 kg/min. The good performances of a fixed downward flat fan water spray were also pointed out (mean concentration reduction of a factor 2–5 for the whole series of experiments carried out), with an optimum of effectiveness at a distance of 10 m downstream from the source. In low wind speed conditions (U₁₀<1 m/s), the downward flat fan water spray was more effective for weak release flow rates. The mitigation effectiveness by absorption remained slight (<3%).     

含湿车间防露除湿方法探讨

在北方的钢铁、机械等企业中，有许多含湿量较大的车间，当冬季室内温度降低时，就会产生结露现象，严重影响了生产及工艺操作，产生事故隐患。以北方某钢铁企业的造球车间为模型，研讨了应用采暖通风的除湿方法，较好地解决车间内的结露问题。     

Influence of the shape of mitigation barriers on heavy gas dispersion

Regasification plants have become an emerging risk because their numbers are increasing and concern from the general population towards these systems has grown. Consequently, there is increased interest in investigating the effect of mitigation measures to limit the impact of large accidents on the population living close to the plant. Among the various possible mitigation measures, physical barriers present several advantages; however, it is known that the necessary barrier height can became impracticably large to be effective in mitigating the consequences of a large LNG release. Therefore, computational fluid dynamics models were used in this work to analyze the performance of mitigation barriers with different shapes to investigate the possibility of increasing mitigation barrier efficiency by simply changing the main geometrical characteristics of the barrier such as roughness, battlements, or even holes.     

化工园区接警处警与应急值守系统的研究

本文分析了目前常用的接警处警系统，针对化工园区安全管理的工作需要，研究化工园区综合接警中心接警处警工作的特点和要求，分析化工园区接警中心工作体系和功能要求，设计开发了化工园区接警处警与应急值守系统。文中对系统体系架构、系统建设关键问题和所需的支持系统进行了详细介绍。该系统集成了地理信息系统的功能，提供化工园区事故接警、通知和处置功能，应用重大危险源监管信息系统、应急预案综合管理系统、综合监控系统等业务系统作为数据支持，为化工园区接警中心管理园区突发事件、实现事故快速反应和及时应对提供技术支持。     

湖北省化工园区应急能力评估

针对湖北省化工园区特点,综合考虑园区内应急能力的各影响因素,建立了化工园区应急能力评估指标体系。运用多层次模糊综合评价法,构建了化工园区应急能力三级评估指标模型。通过对隶属度的定量化分析,最终得出综合应急能力评价等级,为园区应急能力评估的进一步优化提供参考和指导。