Effect of salinity on uptake of 14C-2,2′4,5,5′-pentachlorobiphenyl by juvenile Atlantic salmon

Uptake of ¹⁴C-2,2′,4,5,5′-pentachlorobiphenyl by appropiately adapted juvenile Atlantic salmon (Salmo salar) is more efficient from fresh water than from sea water. Concentrations of ¹⁴C-2,2′,4,5,5′-pentachlorobiphenyl in the whole body as well as in a number of organs and tissues were substantially higher in salmon exposed in fresh water.     

Accumulation and elimination of C-PCBs by daphnia magna straus 1820

The accumulation of chlorinated biphenyls in shows a tendency to increase with decreasing water solubility. The depuration times of PCBs from daphnia depend on the temperature of the test water and possibly on the water solubility of the substance. The water solubilities of 2,2′-dichlorobiphenyl, 2,5,4′-trichlorobiphenyl, 2,4,6,2′-tetrachlorobiphenyl and 2,4,6,2′,4′-pentachlorobiphenyl have been determined using ¹⁴C-labelled substances.     

Effect of coplanar PCB concentration on dechlorinating microbial communities and dechlorination in estuarine sediments

The effect of concentration of coplanar PCB on the dechlorinating microbial community and dechlorination were investigated in anoxic estuarine sediment collected from Er-Jen River and enriched with 10 and 50 mg L⁻¹ of 3,4,4′,5-tetrachlorobiphenyl, 3,3′,4,4′,5-pentachlorobiphenyl, and 3,3′,4,4′,5,5′-hexachlorobipheny. Dechlorination rates were similar in the cultures enriched with 10 and 50 mg L⁻¹ of 3,4,4′,5-tetrachlorobiphenyl, whereas significantly higher dechlorination rates were observed in cultures enriched with 10 mg L⁻¹ of 3,3′,4,4′,5-pentachlorobiphenyl. No dechlorination was observed in sediment slurries enriched with 3,3′,4,4′,5,5′-hexachlorobipheny. Para dechlorination occurred prior to meta dechlorination during reductive dechlorination of 3,4,4′,5-tetrachlorobiphenyl and 3,3′,4,4′,5-pentachlorobiphenyl. GC-MS and denaturing gradient gel electrophoresis (DGGE) were used to detect dechlorination products and dechlorinating microorganisms in the enriched sediment cultures during the process of degradation. Two Chloroflexi phylotypes observed in DGGE were responsible for para and meta dechlorination respectively. Phylotype Cp-1 has 98% similarity to uncultured bacterium N5-12. Phylotype Cm-1 has 99% similarity to uncultured dechlorinating bacterium m1 or SF1 belonging to the ο-17/DF-1 group of PCB-dechlorinating bacteria.     

Catalytic amination and dechlorination of para-nitrochlorobenzene (p-NCB) in water over palladium-iron bimetallic catalyst

Chemical treatment of para-nitrochlorobenzene (p-NCB) by palladium/iron (Pd/Fe) bimetallic particles represents one of the latest innovative technologies for the remediation of contaminated soil and groundwater. The amination and dechlorination reaction is believed to take place predominantly on the surface site of the Pd/Fe catalysts. The p-NCB was first transformed to p-chloroaniline (p-CAN) then quickly reduced to aniline. 100% of p-NCB was removed in 30 min when bimetallic Pd/Fe particles with 0.03% Pd at the Pd/Fe mass concentration of 3g 75 ml(-1) were used. The p-NCB removal efficiency and the subsequent dechlorination rate increased with the increase of bulk loading of palladium and Pd/Fe. As expected, p-NCB removal efficiency increased with temperature as well. In particular, the removal efficiency of p-NCB was measured to be 67%, 79%, 80%, 90% and 100% for reaction temperature 20, 25, 30, 35 and 40 degrees C, respectively. Our results show that no other intermediates were generated besides Cl(-), p-CAN and aniline during the catalytic amination and dechlorination of p-NCB.     

Biliary secretion,retention and excretion of five 14C-labelled polychlorinated biphenyls in the rat

Five ¹⁴C-labelled polychlorinated biphenyls: 2,4′,5-trichlorobiphenyl, 2,2′,4,5′-tetrachlorobiphenyl, 2,2′,4,5,5′-pentachlorobiphenyl, 2,2′,3,4,4′-pentachlorobiphenyl and 2,2′,4,4′,5,5′-hexachlorobiphenyl were administered orally to bile-cannulated rats. The activity secreted in the bile, excreted in the feces and the urine was determined. Residues of radioactivity in certain tissues and the carcass were also measured.The trichlorobiphenyl showed the highest absorption (93.8%±5.4) from the gastrointestinal tract and biliary secretion of radioactivity (87.6%±6.1 of the dose). The hexachlorobiphenyl showed the lowest absorption and biliary secretion, 28.2%±1.4 and 18.6%±1.3, respectively. The urinary excretion was low and the radioactive residues in the eviscerated carcasses increased with the chlorine content of the biphenyls.     

Catalytic dechlorination kinetics of p-dichlorobenzene over Pd/Fe catalysts

p-Dichlorobenzene (p-DCB) was dechlorinated using Pd/Fe bimetallic catalytic reductants synthesized by chemical deposition. Batch experiments demonstrated that the Pd/Fe bimetallic particles could effectively dechlorinate p-DCB, p-DCB and its intermediate chlorobenzene were removed completely at a Pd loading of 0.02% (weight ratio of Pd to Fe) and Pd/Fe power to solution ratio about 4g 75 ml-1 in 90 min. Dechlorination was affected by various factors such as the reaction temperature, pH, Pd loading percentage over Fe and the introduction of Pd/Fe catalysts et al. Chlorobenzene represents partially stable dechlorinated intermediates in the generation of benzene and part of p-DCB was dechlorinated to benzene indirectly on the surface of Pd/Fe. The dechlorination of p-DCB took place on the surface of the Pd/Fe bimetallic particles in a pseudo-first-order reaction, the activation energy of the dechlorination reaction was determined to be 80.0 kJ mol-1 at the temperature range of 287-313 K.     

Deltamethrin degradation and effects on soil microbial activity

Deltamethrin [(S)-cyano-3-phenoxybenzyl-cis-(1R,3R)-2,2-dimethyl) cyclo–propane carboxylate),1] labelled at gem-dimethyl groups of the cyclopropane ring was applied on two Egyptian soils at a level of 10 mg/kg soil for a laboratory incubation experiment under aerobic and anaerobic conditions. A steady decrease of soil extractable¹⁴C-residues, accompanied by a corresponding increase of non- extractable bound ¹⁴C-residues was observed over a 90-day incubation period. The percentage of evolved ¹⁴CO₂ increased with time under aerobic and anaerobic conditions in both soils. The effect of deltamethrin on soil microorganisms as well as the counter effect of microorganisms on the insecticide was also investigated. As the incubation period increased, the inhibitory effect of the insecticide on the microorganisms decreased and the evolution of carbon dioxide depended on the applied dose. The nature of soil methanol soluble residues was determined by chromatographic analysis which revealed the presence of the parent insecticide as the main product in addition to four metabolites: 3-(2′,2′-dibromovinyl)-2,2-dimethylcyclopropane carboxylic acid (II); 3-phenoxybenzaldehyde (III); 3-phenoxybenzoic acid (IV); 3-phenoxybenzyl alcohol (V).     

钯/铝双金属体系对3-氯酚的脱氯降解

研究了钯/铝双金属体系对水相中3-氯酚的催化脱氯降解效果,通过置换沉积制备了钯/铝双金属颗粒,考察了该双金属颗粒的稳定性以及溶液pH和钯负载量对脱氯效果的影响。结果表明,pH在4.0以下的酸性条件,钯负载量在1.43%时,可实现水相中3-氯酚的有效脱氯,反应30 min后0.389 mmol/L的3-氯酚转化率可达99%以上,产物主要为苯酚,而钯/铝颗粒在重复测试中能保持较好的稳定性,这与铝基材表面自发形成的氧化膜有关。钯/铝材料表征的结果表明,钯颗粒高度分散在铝基材表面,并极大地提高了铝基材的表面积,从而有助于后续的脱氯反应。     

Structure relationship for catalytic dechlorination rate of dichlorobenzenes in water

Three isomers of dichlorobenzene (o-, m- and p-DCB) were dechlorinated by Pd/Fe catalyst in aqueous solutions through catalytic reduction. The dechlorination reaction took place on the surface site of the catalyst via a pseudo-first-order kinetics, and resulted in benzene as the final reduction product. The rate constants of the reductive dechlorination for the three dichlorobenzenes (DCBs) in the presence of Pd/Fe as a catalyst were measured experimentally. In all cases, the reaction rate constants were found to increase with the decrease in the Gibbs free energy of the formation of DCBs. The reaction rate constant for o-, m- and p-DCBs in the presence of 0.020% (w/w) Pd/Fe at 25 °C was determined to be 0.0213, 0.0223, and 0.0254 min⁻¹, respectively. While the activation energy of each dechlorination reaction was measured to be 102.5, 96.6 and 80.0 kJ mol⁻¹ for o-, m- and p-DCBs, respectively. The results demonstrated that p-DCBs were reduced more easily than o- or m-DCBs, and the order of the tendency of the dechlorination was p-DCB > m-DCB > o-DCB. The presented data show the catalytic reduction using Pd/Fe as a catalyst is a fast and easy approach for the dechlorination of DCBs.     

Electrospun and functionalized PVDF/PAN nanocatalyst-loaded composite for dechlorination and photodegradation of pesticides in contaminated water

A novel approach for the electrospinning and functionalization of nanocatalyst-loaded polyvinylidene fluoride/polyacrylonitrile (PVDF/PAN) composite grafted with acrylic acid (AA; which form polyacrylic acid (PAA) brush) and decorated with silver (Ag/PAN/PVDF-g-PAA-TiO₂/Fe–Pd) designed for the dechlorination and photodegradation of pesticides was carried out. PAN was used both as a nitrogen dopant as well as a co-polymer. Smooth nanofibers were obtained by electrospinning a solution of 12:2 wt.% PVDF/PAN blend using dimethylformamide (DMF) as solvent. The nanofibers were grafted with AA by free-radical polymerization using 2,2′azobis(2-methylpropionitrile) (AIBN) as initiator. Both bimetallic iron–palladium (Fe–Pd) and titania (TiO₂) nanoparticles (NP) were anchored on the grafted nanofibers via the carboxylate groups by in situ and ex situ synthesis. The Fe–Pd and nitrogen-doped TiO₂ nanoparticles were subsequently used for dechlorination and oxidation of target pollutants (dieldrin, chlorpyrifos, diuron, and fipronil) to benign products. Structural and chemical characterizations of the composites were done using various techniques. These include surface area and porosity analyzer (ASAP) using the technique by Brunner Emmett Teller (BET), Fourier transform infrared (FTIR), X-ray diffraction (XRD), scanning electron microscopy (SEM), and transmission electron microscope (TEM) analyses were done. After dechlorination, the transformation products (TPs) for dieldrin, chlorpyrifos, diuron, and fipronil were obtained and identified using two-dimensional gas chromatography (time-of-flight) with a mass spectrometer detector (GCxGC-TOFMS). Analysis of total organic carbon (TOC) was carried out and used to extrapolate percentage mineralization. Experimental results showed that dechlorination efficiencies of 96, 93, 96, and 90 % for 1, 2, 2, and 3 h treatment period were respectively achieved for 5 ppm solutions of dieldrin, chlorpyrifos, diuron, and fipronil. The dechlorination of dieldrin, diuron, and fipronil follows first-order kinetics while that of chlorpyrifos followed pseudo-first order. Mineralization performance of 34 to 45 % were recorded when Fe–Pd was used, however upon electrospinning, doping, and grafting (Ag/PAN/PVDF-g-PAA-TiO₂/Fe–Pd composite); it significantly increased to 99.9999 %. This composite reveals great potential for dechlorination and mineralization of pesticides in contaminated water.     

Biogeochemistry of two types of permeable reactive barriers, organic carbon and iron-bearing organic carbon for mine drainage treatment: Column experiments

Permeable reactive barriers (PRBs) are an alternative technology to treat mine drainage containing sulfate and heavy metals. Two column experiments were conducted to assess the suitability of an organic carbon (OC) based reactive mixture and an Fe⁰-bearing organic carbon (FeOC) based reactive mixture, under controlled groundwater flow conditions. The organic carbon mixture contains about 30% (volume) organic carbon (composted leaf mulch) and 70% (volume) sand and gravel. The Fe⁰-bearing organic carbon mixture contains 10% (volume) zero-valent iron, 20% (volume) organic carbon, 10% (volume) limestone, and 60% (volume) sand and gravel. Simulated groundwater containing 380 ppm sulfate, 5 ppm As, and 0.5 ppm Sb was passed through the columns at flow rates of 64 (the OC column) and 62 (the FeOC column) ml d^− 1, which are equivalent to 0.79 (the OC column) and 0.78 (the FeOC column) pore volumes (PVs) per week or 0.046 m d^− 1 for both columns. The OC column showed an initial sulfate reduction rate of 0.4 µmol g (OC)^− 1 d^− 1 and exhausted its capacity to promote sulfate reduction after 30 PVs, or 9 months of flow. The FeOC column sustained a relatively constant sulfate reduction rate of 0.9 µmol g (OC)^− 1 d^− 1 for at least 65 PVs (17 months). In the FeOC column, the δ³⁴S values increase with the decreasing sulfate concentration. The δ³⁴S fractionation follows a Rayleigh fractionation model with an enrichment factor of 21.6‰. The performance decline of the OC column was caused by the depletion of substrate or electron donor. The cathodic production of H₂ by anaerobic corrosion of Fe probably sustained a higher level of SRB activity in the FeOC column. These results suggest that zero-valent iron can be used to provide an electron donor in sulfate reducing PRBs. A sharp increase in the δ¹³C value of the dissolved inorganic carbon and a decrease in the concentration of HCO₃⁻ indicate that hydrogenotrophic methanogenesis is occurring in the first 15 cm of the FeOC column.     

Destruction of lindane and atrazine using stabilized iron nanoparticles under aerobic and anaerobic conditions: effects of catalyst and stabilizer

Highly stable Fe-Pd bimetallic nanoparticles were prepared with 0.2% (w/w) of sodium carboxylmethylcellulose (CMC) as a stabilizer. The effectiveness of the stabilized Fe-Pd nanoparticles was studied for degradation of two chlorinated pesticides (lindane and atrazine) under aerobic and anaerobic conditions. Batch kinetic tests showed that under anaerobic condition the nanoparticles can serve as strong electron donors and completely reduce 1 mgl(-1) of lindane at an iron dose of 0.5 gl(-1) or 1mg l(-1) of atrazine with 0.05 gl(-1) iron with a trace amount (0.05-0.8% of Fe) of Pd as a catalyst. In contrast, under aerobic condition, the nanoparticles can facilitate Fenton-like reactions, which lead to oxidation of 65% of lindane under otherwise identical conditions. Under aerobic condition, the presence of CMC reduced the level of hydroxyl radicals generated from the nanoparticels by nearly 50%, and thus, inhibited the oxidation of the contaminants. While the particle stabilization greatly enhanced the anaerobic degradation, it did not appear to be beneficial under aerobic condition. The degradation rate was progressively enhanced as the Pd content increased from 0.05% to 0.8% of Fe, and the catalytic effect of Pd was more significant under anaerobic condition. Under anaerobic condition, lindane is degraded via dihaloelimination and dehydrohalogenation, whereas atrazine is by reductive dechlorination followed by subsequent reductive dealkylation. Under aerobic condition, reactive oxygen species and hydroxyl radicals from the iron nanoparticles are responsible for oxidizing the pesticides. Lindane is oxidized via dechlorination/dehydrohalogenation, whereas atrazine is destroyed through dealkylation of the alkylamino side chain.     

Processes affecting the movement of organochlorine pesticides (OCPs) between soil and air in an industrial site in Turkey

Soil and atmospheric concentrations, dry deposition and soil-air gas exchange of organochlorine pesticides (OCPs) were investigated at an industrial site in Aliaga, Izmir, Turkey. Current-use pesticides, endosulfan and chlorpyrifos, had the highest atmospheric levels in summer and winter. Summertime total (gas + particle) OCP concentrations in air were higher, probably due to increased volatilization at higher temperatures and seasonal local/regional applications of current-use pesticides. Particle deposition fluxes were generally higher in summer than in winter. Overall average dry particle deposition velocity for all the OCPs was 4.9 ± 4.1 cm s⁻¹ (average ± SD). ΣDDXs (sum of p,p′-DDT, p,p′-DDD, and p,p′-DDE) were the most abundant OCPs in Aliaga soils (n = 48), probably due to their heavy historical use and persistence. Calculated fugacity ratios and average net gas fluxes across the soil-air interface indicated volatilization for α-CHL, γ-CHL, heptachlorepoxide, cis-nonachlor, trans-nonachlor, and p,p′-DDT in summer, and for α-CHL, γ-CHL, trans-nonachlor, endosulfan sulfate, and p,p′-DDT in winter. For the remaining OCPs, soil acted as a sink during both seasons. Comparison of the determined fluxes showed that dry particle, gas-phase, and wet deposition are significant OCP input mechanisms to the soil in the study area.     

Global baseline pollution studies XI: Congener specific determination of polychlorinated biphenyls (PCB) and occurrence of alpha- and gamma-hexachlorocyclohexane (HCH), 4,4′-DDE and 4,4′-DDT in continental air

The hexachlorocyclohexane-isomers (HCH), hexachlorobenzene (HCB), the polychlorinated biphenyls (PCB), 1,1,1-trichloro-2,2-bis(p-chlorophenyl)ethane (4,4′-DDT) and 1,1-dichloro-2,2-bis(p-chlorophenyl)ethene (4,4′-DDE) have been measured in urban and rural air around the city of Ulm (F. R. G., 48.4° N, 10.0° E). The sampling stations are typical for continental air in the westerlies of the northern hemisphere including local and regional influences. The analytical method consists of adsorptive sampling of large volumes (1000 m³) of air on silica gel, solvent desorption with CH₂Cl₂, preseparation of the collected chlorinated C₆/C₁₄ hydrocarbons by liquid adsorption chromatography on silica gel, and high resolution capillary gas chromatography with electron capture-(HRGC/ECD) or mass-selective detection (HRGC/MSD). The concentrations found in the lower troposphere under different meteorological conditions reflect regional input and long range transport. The levels found range from 1 pg/m³ for 4,4′-DDT to 10 ng/m³ for gamma HCH.     

Synthesis of [14C]biphenyl and of some chlorinated [14C]biphenyls containing 4-chloro-, 2,4-dichloro- and 2,3,6-trichlorophenyl nuclei from the corresponding labelled anilines

The preparation of ¹⁴C-labelled biphenyl, 2,5-dichlorobiphenyl, 2,4′,5-trichlorobiphenyl, 2,2′,4,5′-tetrachlorobiphenyl, 2′,3,4,4′,5-pentachlorobiphenyl, 2,2′,3,4,4′-pentachlorobiphenyl, 2,3,3′,4′,6-pentachlorobiphenyl and 2,2′,3,3′,6-pentachlorobiphenyl is described [¹⁴C]Aniline hydrogen sulfate used as a starting material was acetylated, chlorinated and deacetylated followed by coupling to benzene or an appropriate chlorobenzene to give the biphenyls labelled in the phenyl nuclei having chlorine atoms at the 4-, 2,4- or 2,3,6-positions, respectively. The structures of the labelled compounds were established by comparison with authentic samples among which 2′,3,4,4′,5- and 2,2′,3,4,4′-pentachlorobiphenyl were not earlier described.A simple method for the preparation of 2,3,6-trichloroacetanilide, unlabelled and labelled, was worked out. 2,6-Dichloroacetanilide in concentrated hydrochloric acid gave the $\text{meta}$ substituted product when treated with chlorine.An improved thin layer chromatographic technique utilizing plates impregnated with certain tetraalkylammonium salts was used for separation of some of the labelled compounds prepared.     

Ni/Fe/Al2O3·PVDF催化还原剂的表征及制备过程优化

在PVDF基体改性的基础上,采用浸渍法制备出Ni/Fe/Al₂O₃·PVDF催化还原剂。通过对一氯乙酸的脱氯效果研究,对交联液配比及交联时间、不同浓度硫酸镍浸渍时间、镍铁比等因素进行优化,实验优化结果表明,Ni/Fe/Al₂O₃·PVDF催化还原剂对一氯乙酸脱氯60 min脱氯率达到64%。经SEM表征,制备出的双金属在膜载体表面及断面分布均匀,呈球状和片状结构且双金属未发生团聚。     

Dechlorination of hexachlorobenzene using lead–iron bimetallic particles

Synthesized lead–iron (Pb/Fe) bimetallic particles were applied to dechlorinate hexachlorobenzene (HCB) under various conditions (e.g. bimetal amount, initial pH value, reaction temperature, and reaction duration). The results showed that adding Pb onto Fe benefited the dechlorination of HCB and the bimetal with 1.4% Pb content performed best. The degradation rate decreased regularly as the initial pH value of the aqueous increased from 1.9 to 11.1 except for pH 7.0 where the fastest dechlorination rate emerged. The dechlorination could be enhanced by increasing the amount of Pb/Fe or the reaction temperature. The dechlorination ratio of HCB within 15 min increased from 24.3% to 81.3% when Pb/Fe amount increased from 0.1 g to 0.8 g. The dechlorination followed pseudo-first-order kinetics, and the dechlorination rate constants were 0.0027, 0.0064, 0.0157, and 0.0321 min^?1 at 25, 50, 70, and 85 °C, respectively, and the activation energy (E_a) of the dechlorination by Pb/Fe was 37.86 kJ mol^?1.     

Soil- and surfactant-enhanced reductive dechlorination of carbon tetrachloride in the presence of Shewanella putrefaciens 200

Sorption of organic contaminants to soils has been shown to limit bioavailability and biodegradation in some systems. Use of surfactants has been proposed to reverse this effect. In this study, the effects of a high organic carbon content soil and a nonionic surfactant (Triton X-100) on the reductive dechlorination of carbon tetrachloride (CCl₄) were examined in anaerobic systems containing Shewanella putrefaciens. Although more than 70% of the added CCl₄ was sorbed to the soil phase in these systems, the reductive dechlorination of CCl₄ was not diminished. Rather, rates of CCl₄ dechlorination in systems containing soil were enhanced relative to systems containing non-sorptive sand slurries. This enhancement was also observed in sterile soil slurries to which a chemical reductant, dithiothreitol was added. It appears that the organic soil used in these experiments contains some catalytic factor capable of transforming CCl₄ in the presence of an appropriate chemical or microbial reductant. The addition of Triton X-100 to sand and soil slurries containing S. putrefaciens resulted in increased CCl₄ degradation in both systems. The effect of Triton could not be explained by: (i) surfactant induced changes in the distribution of CCl₄, (i.e. decreased sorption) or the rate of CCl₄ desorption; (ii) a direct reaction between Triton and CCl₄; or (iii) increased cell numbers resulting from use of the surfactant as a substrate. Rather, it appears that Triton X-100 addition resulted in lysis of bacterial cells, a release of biochemical reductant, and enhanced reductive transformation of CCl₄. These results provide insights to guide the development of more effective direct or indirect bioremediation strategies.     

Characterization of bacterial communities at heavy-metal-contaminated sites

The microbial community in soil samples from two long-term contaminated sites was characterized by using culture-dependent and culture-independent methods. The two sites investigated contained high amounts of heavy metals and were located in the upper Silesia Industrial Region in southern Poland. The evaluation of the aerobic soil microbial population clearly demonstrated the presence of considerable numbers of viable, culturable bacteria at both sites. A high fraction of the bacterial population was able to grow in the presence of high amounts of metals, i.e. up to 10 mM Zn²⁺, 3 mM Pb²⁺ or 1 mM Cu²⁺. Site 1 contained significantly (P < 0.05) lower bacterial numbers growing in the presence of 10 mM Zn²⁺ than site 2, while the opposite was observed for bacteria tolerating 1 mM Cu²⁺. This coincided with the contents of these two metals at the two sites. Ecophysiological (EP) indices for copiotrophs (r-strategists) and oligotrophs (K-strategists) pointed to high bacterial diversity at both sites. Fluorescence in situ hybridization (FISH) analysis indicated that Actinobacteria and Proteobacteria represent the physiologically active fraction of bacteria at the two sites. Shannon diversity (H′) indices for FISH-detected bacterial phylogenetic groups were not significantly different at the two sites.