Mitigation of greenhouse gas emissions by anaerobic digestion of cattle slurry

Biogas treatment of animal manures is an upcoming technology because it is a way of producing renewable energy (biogas). However, little is known about effects of this management strategy on greenhouse gas (GHG) emissions during fermentation, storage, and field application of the substrates compared to untreated slurries. In this study, we compared cattle slurry and cattle slurry with potato starch as additive during the process of fermentation, during storage and after field application. The addition of potato starch strongly enhanced CH₄ production from 4230 l CH₄ m⁻³ to 8625 l CH₄ m⁻³ in the fermenter at a hydraulic retention time (HRT) of 29 days. Extending the HRT to 56 days had only a small effect on the CH₄ production. Methane emissions from stored slurry depended on storage temperature and were highest from unfermented slurry followed by the slurry/starch mixture. Gas emissions from untreated and fermented slurry during storage were further analyzed in a pilot-scale experiment with different levels of covering such as straw cover, a wooden lid and no cover. Emissions of greenhouse gases (CH₄, N₂O, NH₃) were in the range of 14.3–17.1 kg CO₂ eq. m⁻³ during winter (100 day storage period) and 40.5–90.5 kg CO₂ eq. m⁻³ during summer (140 day storage period). A straw cover reduced NH₃ losses, but not overall GHG emissions, whereas a solid cover reduced CH₄ and NH₃ emissions. After field application, there were no significant differences between slurry types in GHG emissions (4.15–8.12 kg CO₂ eq. m⁻³ a⁻¹). GHG emissions from slurry stores were more important than emissions after field application. Co-digestion of slurry with additives such as starch has a large potential to substitute fossil energy by biogas. On a biogas plant, slurry stores should be covered gas-tight in order to eliminate GHG emissions and collect CH₄ for electricity production.     

Monitoring GHG from manure stores on organic and conventional dairy farms

Organic farming methods are claimed to be more environmentally friendly than conventional methods and the EU MIDAIR project had an overall aim to compare emissions from organic dairy farming with conventional methods of milk production. Manure stores are the second largest source of methane emissions (after enteric fermentation) on European dairy farming.The aim of this project was to measure green house gas (GHG) emissions from manures in covered and uncovered slurry stores and farm yard manure (FYM) heaps. The chosen method for measuring these emissions was the tracer ratio method, using sulphur hexafluoride (SF₆) as the tracer gas, the limitations of this method prevented successful measurements being made on some of the stores and a modified method was used on the covered stores. The difference in concentration of the upwind and downwind samples and interfering sources were limiting factors. FYM emission measurements were successful only when the manure was stored indoors.Methane emissions were successfully measured over a 12 month period from the uncovered slurry stores. Emission rates from the uncovered slurry stores on the conventional farm and the organic farm ranged from 14.4 to 49.6 and from 12.4 to 42.3 g C m⁻³ d⁻¹, respectively, with the mean CH₄ emission rates of 35 and 26 g C m⁻³ d⁻¹. On both farms, nitrous oxide emissions were close to zero.Methane emissions measured from the indoor organic FYM in summer were 17.1 g C m⁻³ d⁻¹ and the nitrous oxide emission was 411 mg N m⁻³ d⁻¹.The covered slurry stores were in such close proximity to other GHG sources that the tracer ratio method was unsuitable and the air-injection method was adopted. The measured emissions from covered slurry stores of CH₄, CO₂ and NH₃ were, respectively, 14.9 g C m⁻³ d⁻¹, 12.9 g C m⁻³ d⁻¹ and 18.6 mg NH₃ m⁻² d⁻¹ of slurry in February and 12.0 g C m⁻³ d⁻¹, 9.5 g C m⁻³ d⁻¹ and 335 mg NH₃ m⁻² d⁻¹ slurry in March. No nitrous oxide production could be measured.     

Balancing of greenhouse gas emissions and economic efficiency for biogas-production through anaerobic co-fermentation of slurry with organic waste

Using the organic fraction of municipal solid waste (OFMSW) for biogas production might contribute to greenhouse gas mitigation, but emissions linked with biogas production can reduce these beneficial effects. Therefore the emissions of NH₃, CH₄ and N₂O and costs caused by treating OFMSW by co-fermentation with slurry were calculated in detail from literature data, and strategies for reducing emissions were evaluated. Emission factors were calculated for single gases during storage and after application. The sensitivity of the calculations concerning the organic dry matter content of OFMSW, retention time and CH₄-yield was analyzed. The anaerobic co-fermentation of OFMSW increased biogas yields and contributed to the reduction of CO₂ emissions with 32 to 152 kg CO₂ t⁻¹ organic waste depending on application and storage techniques used for the fermentation residues. Considering a payment of 0.1 €/kWh for the electricity produced, the costs for utilization of OFMSW in slurry based biogas plants were calculated to range between 34 and 38 € t⁻¹. Measures for mitigating greenhouse gas emissions by covering the fermentation residue stores proved to be more cost effective with 3–31 € t⁻¹ CO₂ compared to immediate harrowing or injecting the residues during field application.     

Life-cycle environmental and economic impacts of energy-crop fuel-chains: an integrated assessment of potential GHG avoidance in Ireland

This paper combines life-cycle analyses and economic analyses for Miscanthus and willow heat and electricity fuel-chains in Ireland. Displaced agricultural land-uses and conventional fuels were considered in fuel-chain permutations. Avoided greenhouse gas (GHG) emissions ranged from 7.7 to 35.2 t CO₂ eq. ha⁻¹ a⁻¹. Most fuel-chain permutations exhibited positive discounted financial returns, despite losses for particular entities at a farm-gate processed-biomass price of €100 t⁻¹ dry-matter. Attributing a value of €10 t⁻¹ CO₂ eq. to avoided GHG emissions, but subtracting financial returns associated with displaced fuel supplies, resulted in discounted annual national economic benefits (DANEBs) ranging from −457 to 1887€ ha⁻¹ a⁻¹. Extrapolating a plausible combination of fuel-chains up to a national indicative scenario resulted in GHG emission avoidance of 3.56 Mt CO₂ eq. a⁻¹ (5.2% of national emissions), a DANEB of 167 M€, and required 4.6% of national agricultural land area. As cost-effective national GHG avoidance options, Miscanthus and willow fuel-chains are robust to variation in yields and CO₂ price, and appear to represent an efficient land-use option (e.g. compared with liquid biofuel production). Policies promoting utilisation of these energy-crops could avoid unnecessary, and environmentally questionable, future purchase of carbon credits, as currently required for national Kyoto compliance.     

Disaggregated greenhouse gas emission inventories from agriculture via a coupled economic-ecosystem model

Estimates of regional greenhouse gas emissions from agricultural systems are needed to evaluate possible mitigation strategies with respect to environmental effectiveness and economic feasibility. Therefore, in this study, we used the GIS-coupled economic-ecosystem model EFEM–DNDC to assess disaggregated regional greenhouse gas (GHG) emissions from typical livestock and crop production systems in the federal state of Baden-Württemberg, Southwest Germany. EFEM is an economic farm production model based on linear programming of typical agricultural production systems and simulates all relevant farm management processes and GHG emissions. DNDC is a process-oriented ecosystem model that describes the complete biogeochemical C and N cycle of agricultural soils, including all trace gases.Direct soil emissions were mainly related to N₂O, whereas CH₄ uptake had marginal influence (net soil C uptake or release was not considered). The simulated N₂O emissions appeared to be highly correlated to N fertilizer application (R² = 0.79). The emission factor for Baden-Württemberg was 0.97% of the applied N after excluding background emissions.Analysis of the production systems showed that total GHG emissions from crop based production systems were considerably lower (2.6–3.4 Mg CO₂ eq ha⁻¹) than from livestock based systems (5.2–5.3 Mg CO₂ eq ha⁻¹). Average production system GHG emissions for Baden-Württemberg were 4.5 Mg CO₂ eq ha⁻¹. Of the total 38% were derived from N₂O (direct and indirect soil emissions, and manure storage), 40% were from CH₄ (enteric fermentation and manure storage), and 22% were from CO₂ (mainly fertilizer production, gasoline, heating, and additional feed). The stocking rate was highly correlated (R² = 0.85) to the total production system GHG emissions and appears to be a useful indicator of regional emission levels.     

Dairy farm CH4 and N2O emissions,from one square metre to the full farm scale

The greenhouse gas emissions from agricultural systems contribute significantly to the national budgets for most countries in Europe. Measurement techniques that can identify and quantify emissions are essential in order to improve the selection process of emission reduction options and to enable quantification of the effect of such options. Fast box emission measurements and mobile plume measurements were used to evaluate greenhouse gas emissions from farm sites. The box measurement technique was used to evaluate emissions from farmyard manure and several other potential source areas within the farm. Significant (up to 250 g CH₄ m⁻² day⁻¹and 0.4 g N₂O m⁻² day⁻¹) emissions from ditches close to stables on the farm site were found.Plume emission measurements from individual manure storages were performed at three sites. For a manure storage with 1200 m³ dairy slurry in Wageningen emission factors of 11 ± 5 g CH₄ m⁻³ manure day⁻¹ and 14 ± 8 mg N₂O m⁻³ manure day⁻¹ were obtained in February 2002.Mobile plume measurements were carried out during 4 days at distances between 30 and 300 m downwind of 20 different farms. Total farm emissions levels ranged from 14 to 95 kg CH₄ day⁻¹ for these sites. Expressed as emission per animal the levels were 0.7 ± 0.4 kg CH₄ animal⁻¹ day⁻¹ for conventional farms. For three farms that used straw bedding for the animals1.4 ± 0.2 kg CH₄ animal⁻¹ day⁻¹ was obtained. These factors include both respired methane and emission from manure in the stable and the outside storages.For a subset of these farms the CH₄ emission was compared with monthly averaged model emission calculations using FarmGHG. This model calculates imports, exports and flows of all products through the internal chains on the farm using daily time steps. The fit of modelled versus measured data has a slope of 0.97 but r² = 0.27. Measurements and model emission estimates agree well on average, for large farms within 30%. For small farms the differences can be up to a factor of 3. CH₄ emissions during winter seem to be underestimated.     

Modelling greenhouse gas emissions from European conventional and organic dairy farms

Agriculture is an important contributor to global emissions of greenhouse gases (GHG), in particular for methane (CH₄) and nitrous oxide (N₂O). Emissions from farms with a stock of ruminant animals are particularly high due to CH₄ emissions from enteric fermentation and manure handling, and due to the intensive nitrogen (N) cycle on such farms leading to direct and indirect N₂O emissions. The whole-farm model, FarmGHG, was designed to quantify the flows of carbon (C) and nitrogen (N) on dairy farms. The aim of the model was to allow quantification of effects of management practices and mitigation options on GHG emissions. The model provides assessments of emissions from both the production unit and the pre-chains. However, the model does not quantify changes in soil C storage.Model dairy farms were defined within five European agro-ecological zones for both organic and conventional systems. The model farms were all defined to have the same utilised agricultural area (50 ha). Cows on conventional and organic model farms were defined to achieve the same milk yield, so the basic difference between conventional and organic farms was expressed in the livestock density. The organic farms were defined to be 100% self-sufficient with respect to feed. The conventional farms, on the other hand, import concentrates as supplementary feed and their livestock density was defined to be 75% higher than the organic farm density. Regional differences between farms were expressed in the milk yield, the crop rotations, and the cow housing system and manure management method most common to each region.The model results showed that the emissions at farm level could be related to either the farm N surplus or the farm N efficiency. The farm N surplus appeared to be a good proxy for GHG emissions per unit of land area. The GHG emissions increased from 3.0 Mg CO₂-eq ha⁻¹ year⁻¹ at a N surplus of 56 kg N ha⁻¹ year⁻¹ to 15.9 Mg CO₂-eq ha⁻¹ year⁻¹ at a N surplus of 319 kg N ha⁻¹ year⁻¹. The farm N surplus can relatively easily be determined on practical farms from the farm records of imports and exports and the composition of the crop rotation. The GHG emissions per product unit (milk or metabolic energy) were quite closely related to the farm N efficiency, and a doubling of the N efficiency from 12.5 to 25% reduced the emissions per product unit by ca. 50%. The farm N efficiency may therefore be used as a proxy for comparing the efficiencies of farms with respect to supplying products with a low GHG emission.     

Effect of straw addition on nitrous oxide and methane emissions from stored farmyard manures

Stored solid manure heaps can be a significant source of nitrous oxide (N₂O) and methane (CH₄) emissions. The manure characteristics influence emissions and solid manure heaps can be managed to promote aerobic decomposition during storage. Increasing the carbon (C) content of the manure heap with high-C additives, such as straw, may provide the opportunity for N₂O and CH₄ emission reduction. Greenhouse gas (GHG) emissions from conventionally produced farmyard manure (FYM) have been quantified, but there is little data on emissions from organically produced FYM. N₂O and CH₄ emissions were measured using a small-scale storage method from FYM collected from organic and conventional dairy units under a range of storage conditions with and without extra straw addition.The organic and the conventional FYM were similar in composition except for the higher C and dry matter content in the organic FYM and in the FYM with added straw. This resulted in mean total emissions of N₂O and CH₄ being lower from the organic (27 g N t⁻¹) than the conventional FYM (52 g N t⁻¹) and from the treatments with straw added (32 g N t⁻¹) than those without (47 g N t⁻¹). The initial C:N ratio and dry matter content of the stored FYM were the most important factors affecting N₂O and CH₄ emissions although the FYM temperature also affected CH₄ emissions. Adding high-C additives, such as straw could be a promising strategy for reducing GHG emissions because it influences the dry matter content, C:N ratio and aeration of the manure. The small-scale FYM storage method were shown to be a reliable and an easy method to quantify emissions under a range of environmental conditions and manure manipulations and so develop effective manure management practices to reduce GHG emissions.     

Ammonia and nitrous oxide emissions following land application of high and low nitrogen pig manures to winter wheat at three growth stages

Nitrous oxide (N₂O) and ammonia (NH₃) emissions from surface applied high (HN) and low (LN) nitrogen pig manures were measured under field conditions. Manures were band-spread to a winter wheat crop at three growth stages—mid-tillering, stem elongation and flag leaf emergence. The N₂O flux rates were measured using the static chamber technique while NH₃ volatilisation was assessed using a micrometeorological mass balance technique with passive flux samplers. The N₂O emissions were episodic in nature with flux rates observed ranging from 2.8 to 31.5 g N₂O–N ha^?1 day^?1 (P < 0.001). Higher N₂O emissions generally occurred after rainfall events. Highest N₂O losses were observed from the HN treatment with LN manure use decreasing emissions by 18% (P < 0.03). The NH₃ volatilisation rates were highest within 1 h of manure application with 95% of emissions occurring within 24 h (P < 0.001). Cumulative N loss was highest at mid-tillering as low crop canopy cover and increased wind-speeds enhanced NH₃ loss (P < 0.001). Highest emissions were measured from the HN manure (P < 0.03). Total ammoniacal N loss ranged from 6 to 11%. Crop N uptake and grain yield were unaffected by application timing or manure type. Therefore, the use of LN manures decreased gaseous emissions of N₂O and NH₃ without any adverse effects on crop performance.     

Effects of different diets on utilization of nitrogen from cattle slurry applied to grassland on a sandy soil in The Netherlands

Dietary adjustments have been suggested as a means to reduce N losses from dairy systems. Differences in fertilizing value of dairy slurry as a result of dietary adjustments were evaluated in a 1-year grassland experiment and by long-term modelling. Slurry composition of non-lactating dairy cows was manipulated by feeding diets with extreme high and low levels of dietary protein and energy. C:N_total ratio of the produced slurries ranged from 5.1 to 11.4. To evaluate their short-term fertilizer N value, the experimental slurries (n = 8) and slurries from commercial farms with variable composition (n = 4), were slit-injected in two grassland fields on the same sandy soil series in the north of The Netherlands (53°10′N, 6°04′E), with differences in sward age and ground water level. The recently established grassland field (NEW) was characterized by lower soil OM, N and moisture contents, less herbs and more modern grass varieties compared to the older grassland field (OLD). Slurry was applied in spring (100 kg N ha⁻¹) and after the first cut (80 kg N ha⁻¹) while in total four cuts were harvested. Artificial fertilizer N treatments were included in the experiment to calculate the mineral fertilizer equivalent (MFE) of slurry N. The OLD field showed a higher total N uptake whereas DM yields were similar for the two fields. Average MFE of the slurries on the OLD field (47%) was lower than on the NEW field (56%), probably as a result of denitrification of slurry N during wet conditions in spring. Slurries from high crude protein diets showed a significantly higher MFE (P < 0.05) compared to low crude protein diets. No significant differences in MFE were observed between slurries from high and low energy diets. On both fields, MFE appeared to be positively related to the ammonium content (P < 0.001) and negatively to the C:N_total ratio of the slurry DM (P = 0.001). Simulation of the effect of long-term annual application of 180 kg N ha⁻¹ with highest and lowest C:N_total ratio suggested that both slurries would lead to an increase in annual soil N mineralization. Both soil N mineralization and SOC appeared to be substantially higher in equilibrium state for the slurry with the highest C:N_total ratio. It is concluded that in a situation with slit-injection, the reduced first-year N availability of slurry with a high C:N_total ratio as observed in the grassland experiment will only be compensated for by soil N mineralization on the very long term.     

Environmental consequences of different beef production systems in the EU

The aim of this paper is to examine the environmental consequences of beef meat production in the EU, using a life cycle approach. Four beef production systems were studied – three from intensively reared dairy calves and one from suckler herds. According to the results of the analysis, the contributions from the production of 1 kg beef meat (slaughter weight) to global warming, acidification, eutrophication, land use and non-renewable energy use were lower for beef from dairy calves than from suckler herds (16.0–19.9 versus 27.3 kg CO₂e, 101–173 versus 210 g SO₂e, 622–1140 versus 1651 g NO₃e, 16.5–22.7 versus 42.9 m²year, and 41.3–48.2 versus 59.2 MJ, respectively). The breakdown analysis helped identify the key areas in the “cradle to farm gate” beef production system where sustainable management strategies are needed to improve environmental performance. The study also included a sensitivity analysis to preliminarily estimate GHG emissions from beef production systems if land opportunity cost and land use change related to grazing and feed crop production for beef were taken into account. If so, the contribution from the production of 1 kg beef to global warming would increase by a factor of 3.1–3.9, based on a depreciation period of 20 years. This highlights the importance of taking into account the impacts of land use in assessing the environmental impacts of livestock production.     

Life cycle greenhouse gases,energy and cost assessment of automobiles using magnesium from Chinese Pidgeon process

Magnesium (Mg) has a great potential to reduce vehicle weight, fuel consumption, and greenhouse gas emissions. The Chinese Mg industry has developed rapidly since the 1990s. The output of Mg reached 700,000 tons in 2006, accounting for more than 70% of global Mg production. Most of Mg is produced in China through the Pidgeon process that has an intensive energy usage and generates a large amount of greenhouse gas (GHG) emissions, which may offset the potential advantage of using Mg parts in automobiles. It is critical to quantify the energy usage and GHG emissions through entire life cycle when the Mg are applied to automobiles. It is also essential to evaluate cost implications of the Mg parts application in automobiles and ensure it to be cost competitive. The objectives of this study are (1) Build a life cycle inventory (LCI) of Mg produced by Pidgeon process; (2) Establish an LCA model that can evaluate GHG emissions and energy usage for the Mg automotive application; (3) Estimate the cost implications of the Mg parts application in automobiles.An Mg LCI was built based on interviews and surveys and the GREET model was adapt for this study. The results indicated that, for each kilogram of Mg produced by Pidgeon process, GHG emissions and energy usage would be 27 kg CO₂eq and 280 MJ, which are five times higher than steel production. Replacing steel with 82 kg Mg on a base automobile would lower curb weight by 5.7%, but only reduce life cycle GHG emissions and energy usage by 0.8% and 1.3%. Scenario analyses indicated that potential reduction of life cycle GHG emissions and energy usage could reach to 15%, if secondary weight saving and a smaller engine were included. Cost analyses also show 18% reduction when the additional weight saving and a smaller displacement engine were included, under a 100,000 km driving distance and gasoline price at $1.0/l.     

Lodging in rice can be alleviated by atmospheric CO2 enrichment

The projected increase of atmospheric CO₂ concentration [CO₂] is expected to increase yield of agricultural C₃ crops, but little is known about effects of [CO₂] on lodging that can reduce yield. This study examined the interaction between [CO₂] and nitrogen (N) fertilization on the lodging of rice (Oryza sativa L.) using free-air CO₂ enrichment (FACE) systems installed in paddy fields at Shizukuishi, Iwate, Japan (39°38′N, 140°57′E). Rice plants were grown under two levels of [CO₂] (ambient = 365 μmol mol⁻¹; elevated [CO₂] = 548 μmol mol⁻¹) and three N fertilization regimes: a single initial basal application of controlled-release urea (8 g N m⁻², CRN), split fertilization with a standard amount of ammonium sulfate (9 g N m⁻², MN), and ample N (15 g N m⁻², HN). Lodging score (six ranks at 18° intervals, with larger scores indicating greater bending), yield, and yield components were measured at maturity. The lodging score was significantly higher under HN than under CRN and MN, but lodging was alleviated by elevated [CO₂] under HN. This alleviation was associated with the shortened and thickened lower internodes, but was not associated with a change in the plant's mass moment around the culm base. A positively significant correlation between lodging score and ripening percentage indicated that ripening percentage decreased by 4.5% per one-unit increase in lodging score. These findings will be useful to develop functional algorithm that can be incorporated into mechanistic crop models to predict rice production more accurately in a changing climate and with different cultural practices.     

Nitrous oxide emissions from a dung heap measured by chambers and plume methods

Dung heaps provide a large, spatial and temporal variable, source of the greenhouse gas N₂O. In this paper emission rates measured by static and flow through chamber methods, which enclose only a small area of the heap, were compared with Gaussian plume and tracer ratio methods, which measure the emissions from the entire dung heap. The dung heap was a 300 m³ heap, composed of material from nearby cattle sheds. From the flow through and static chambers it was estimated that the dung heap emitted 315 and 51 g N₂ON m⁻³ day⁻¹, respectively. The spatial variability between the chambers and chamber methods was large. Standard deviations of the mean fluxes were >75% of the average flux. The smaller emissions were measured on the slopes of the heap and the larger emissions on the ridge. The plume of N₂O was measured downwind of the dung heap by (1) tunable diode laser spectroscopy and calculation of the N₂O source strength of the heap using Gaussian plume theory and (2) tracer ratio method releasing SF₆ from the heap summit and capture in Tedlar bags downwind with subsequent analysis by gas chromatography. The Gaussian plume theory calculated an average N₂O source strength of 5.3 g N₂ON m⁻³ day⁻¹ (1.4–6.7 g N₂ON m⁻³ day⁻¹). The tracer ratio method calculated a slightly larger average emission rate of 14.4 g N₂ON m⁻³ day⁻¹ (7.4–38.6 g N₂ON m⁻³ day⁻¹). Both methods were successfully validated by point release of SF₆ and N₂O, which suggests that the micrometeorological methods provided a good estimate of the source strength of the heap, whereas the few chamber measurements overestimated its source strength.     

Reducing phosphorus in dairy diets improves farm nutrient balances and decreases the risk of nonpoint pollution of surface and ground waters

Reducing phosphorus (P) in dairy diets may result in different types of manure with different chemical composition. Application of these manures to soils may affect the soil P solubility and lead to different environmental consequences. A laboratory incubation study determined the impact of 40 dairy manures on P dynamics in two soil types, Mattapex silt loam (Aquic Hapludult) and Kalmia sandy loam (Typic Hapludult). The manures were fecal samples of lactating cows, collected from commercial dairy farms located in Northeastern and Mid-Atlantic United States, with a wide range of dietary P concentrations (from 2.9 to 5.8 g P kg⁻¹ feed dry matter, DM). Dried and ground fecal samples were mixed with surface horizon (0–15 cm) of soils at 150 kg P ha⁻¹ and the mixtures were incubated at 25 °C for 21 days. At the end of incubation, water soluble P (WS-P) and Mehlich-3 P (M3-P) in the soil–manure mixtures were substantially higher than the control (soil alone) but were lower than the soils receiving fertilizer KH₂PO₄ at 150 kg P ha⁻¹. Similarly, the relative extractability of P in soils amended with low- and high-P manures was always lower (<93%) than KH₂PO₄ suggesting that fertilizer P is more effective at increasing soil solution P in the short-term. Concentrations of WS-P or M3-P in soil–manure mixtures did not differ regardless of the source of manure (i.e. different farms and different diets). This suggests that when the same amount of P is added to soils through manure applications, the solubility or bioavailability of P in soils will be the same. However, P concentrations in feces correlate significantly with that in diets (r = 0.82^**); and when the manures were grouped into high-P diets (averaging 5.1 g P kg⁻¹) versus low-P diets (3.6 g P kg⁻¹), manure P was 40% greater in the high-P group (10.6 g kg⁻¹ DM) than the low-P group (7.6 g kg⁻¹ DM). Thus, lowering excess P in diets would reduce P excretion in manures, P accumulation in soils, improve P balance on farms, require less area for land disposal, and decrease potential for P loss to waters.     

Quantifying and managing regional greenhouse gas emissions：Waste sector of Daejeon, Korea

A credible accounting of national and regional inventories for the greenhouse gas （GHG） reduction has emerged as one of the most significant current discussions. This article assessed the regional GHG emissions by three categories of the waste sector in Daejeon Metropolitan City （DMC）, Korea, examined the potential for DMC to reduce GHG emission, and discussed the methodology modified from Intergovernmental Panel on Climate Change and Korea national guidelines. During the last five years, DMC＇s overall GHG emissions were 239 thousand tons C02 eq./year from eleven public environmental infrastructure facilities, with a population of 1.52 million. Of the three categories, solid waste treatment/disposal contributes 68%, whilst wastewater treatment and others contribute 22% and 10% respectively. Among GHG unit emissions per ton of waste treatment, the biggest contributor was waste incineration of 694 kg CO2 eq./ton, followed by waste disposal of 483 kg CO2 eq./ton, biological treatment of solid waste of 209 kg CO2 eq./ton, wastewater treatment of 0.241 kg CO2 eq./m3, and public water supplies of 0.067 kg CO2 eq./m3. Furthermore, it is suggested that the potential in reducing GHG emissions from landfill process can be as high as 47.5% by increasing landfill gas recovery up to 50%. Therefore, it is apparent that reduction strategies for the main contributors of GHG emissions should take precedence over minor contributors and lead to the best practice for managing GHGs abatement.     

Material flows in the life cycle of leather

This paper presents a study on the resource and environmental profile of leather for communicating to the consumers about the environmental burdens of leather products. The results indicate that significant environmental impacts were caused during the tanning and finishing of leather as well as the electricity production and transportation required in the life cycle. The use of fossil fuels in the production of energy has greater impact with increased emissions leading to about 15190 kg CO₂ equivalent of global warming and about 73 kg SO₂ equivalent of acidification while producing 100 m² of leather for shoe uppers. Further resource use of 174 kg of coal, 6.5 kg of fuel oil, 17.4 m³ of water and 348 kg of chemicals of which about 204 kg are hazardous are consumed, and wastewater of about 17 m³, BOD of 55 kg, COD of about 146 kg, TDS of 732 kg and solid waste of about 1445 kg are generated during the life cycle for the production of 100 m² of leather. The total solid waste generated is 1317 kg, out of which about 80% is biodegradable contributed by slaughtering, tanning and finishing stage, 14% is non-biodegradable contributed by tanning, finishing and electricity production stages and 6% is hazardous mainly from tanning and finishing stage of leather.     

Comparing intensive,extensified and organic grassland farming in southern Germany by process life cycle assessment

To reduce the environmental burden of agriculture, suitable methods to comprehend and assess the impact on natural resources are needed. One of the methods considered is the life cycle assessment (LCA) method, which was used to assess the environmental impacts of 18 grassland farms in three different farming intensities — intensive, extensified, and organic — in the Allgäu region in southern Germany. Extensified and organic compared with intensive farms could reduce negative effects in the abiotic impact categories of energy use, global warming potential (GWP) and ground water mainly by renouncing mineral nitrogen fertilizer. Energy consumption of intensive farms was 19.1 GJ ha⁻¹ and 2.7 GJ t⁻¹ milk, of extensified and organic farms 8.7 and 5.9 GJ ha⁻¹ along with 1.3 and 1.2 GJ t⁻¹ milk, respectively. Global warming potential was 9.4, 7.0 and 6.3 CO₂-equivalents ha⁻¹ and 1.3, 1.0 and 1.3 CO₂-equivalents t⁻¹ milk for the intensive, extensified and organic farms, respectively. Acidification calculated in SO₂-equivalents was high, but the extensified (119 kg SO₂ ha⁻¹) and the organic farms (107 kg SO₂ ha⁻¹) emit a lower amount compared with the intensive farms (136 kg SO₂ ha⁻¹). Eutrophication potential computed in PO₄-equivalents was higher for intensive (54.2 kg PO₄ ha⁻¹) compared with extensified (31.2 kg PO₄ ha⁻¹) and organic farms (13.5 kg PO₄ ha⁻¹). Farmgate balances for N (80.1, 31.4 and 31.1 kg ha⁻¹) and P (5.3, 4.5 and −2.3 kg ha⁻¹) for intensive, extensified and organic farms, respectively, indicate the different impacts on ground and surface water quality. Analysing the impact categories biodiversity, landscape image and animal husbandry, organic farms had clear advantages in the indicators number of grassland species, grazing cattle, layout of farmstead and herd management, but indices in these categories showed a wide range and are partly independent of the farming system.     

Nitrous oxide emissions from organic and conventional crop rotations in five European countries

Nitrous oxide (N₂O) emissions from agriculture are currently estimated from N inputs using emission factors, and little is known about the importance of regional or management-related differences. This paper summarizes the results of a study in which N₂O emission rates were recorded on 15–26 occasions during a 12-month period in organic and conventional dairy crop rotations in five European countries (Austria, Denmark, Finland, Italy, UK). A common methodology based on static chambers was used for N₂O flux measurements, and N₂O data were compiled together with information about N inputs (from fertilizers, N₂ fixation, atmospheric deposition and excretal returns), crop rotations and soil properties. Organic rotations received only manure as N fertilizer, while manure accounted for 0–100% of fertilizer N in conventional rotations. A linear regression model was used to examine effects of location, system and crop category on N₂O emissions, while a second model examined effects of soil properties. Nitrous oxide emissions were higher from conventional than from organic crop rotations except in Austria and, according to the statistical analysis, the differences between locations and crop categories were significant. Ammonium was significantly related to N₂O emissions, although this effect was dominated by observations from a grazing system. Despite the limited number of samplings, annual emissions were estimated by interpolation. Across the two systems and five locations there was a significant relationship between total N inputs and N₂O emissions at the crop rotation level which indicated that annually 1.6 ± 0.2% (mean ± standard error) of total N inputs were lost as N₂O, while there was a background emission of 1.4 ± 0.3 kg N₂O-N ha⁻¹ year⁻¹. Although this measurement program emphasized system effects at the expense of high temporal resolution, the results indicate that N input is a significant determinant for N₂O emissions from agricultural soils.     

Greenhouse gas emissions from production and use of used cooking oil methyl ester as transport fuel in Thailand

Biodiesel, produced from various vegetable and/or animal oils, is one of the most promising alternative fuels for transportation in Thailand. Currently, the waste oils after use in cooking are not disposed adequately. Such oils could serve as a feedstock for biodiesel which would also address the waste disposal issue. This study compares the life cycle greenhouse gas (GHG) emissions from used cooking oil methyl ester (UCOME) and conventional diesel used in transport. The functional unit (FU) is 100 km transportation by light duty diesel vehicle (LDDV) under identical driving conditions. Life cycle GHG emissions from conventional diesel are about 32.57 kg CO₂-eq/FU whereas those from UCOME are 2.35 kg CO₂-eq/FU. The GHG emissions from the life cycle of UCOME are 93% less than those of conventional diesel production and use. Hence, a fuel switch from conventional diesel to UCOME will contribute greatly to a reduction in global warming potential. This will also support the Thai Government's policy to promote the use of indigenous and renewable sources for transportation fuels.