Partitioning and source diagnostics of polycyclic aromatic hydrocarbons in rivers in Tianjin, China

Water, suspended particulate matter (SPM), and sediment samples were collected from ten rivers in Tianjin and analyzed for 16 polycyclic aromatic hydrocarbons (PAHs), dissolved organic carbon (DOC), particulate organic carbon (POC) in SPM and total organic carbon (TOC) in sediment. The behavior and fate of PAHs influenced by these parameters were examined. Generally, organic carbon was the primary factor controlling the behavior of the 16 PAH species. Partitioning of PAHs between SPM and water phase was studied, and K(OC) for some PAH species were found to be significantly higher than the predicted values. The source of PAHs contamination was diagnosed by using PAH isomer ratios. Coal combustion was identified to be a long-term and prevailing contamination source for sediment, while sewage/wastewater source could reasonably explain a short-term PAHs contamination of SPM.     

Correlation of ambient inhalable bioaerosols with particulate matter and ozone: a two-year study

In this study, we have examined the relationships between the concentrations of ambient inhalable airborne fungi and pollen with PM10, PM2.5, ozone, organic carbon, selected trace metals (cadmium, copper, lead, and zinc), temperature, and relative humidity. The database was collected in Cincinnati, Ohio, USA, during two consecutive years. Measurements of all environmental variables were performed at the same site continuously 5 days a week except during winter months. The airborne concentrations of biological and non-biological pollutants ranged as follows: total fungi: 184-16 979 spores m(-3); total pollen: 0-6692 pollen m(-3); PM10: 6.70-65.38 microg m(-3); PM2.5: 5.04-45.02 microg m(-3); and ozone: 2.54-64.17 ppb. Higher levels of total inhalable fungi and particulate matter were found during fall and summer months. In contrast, total pollen concentration showed elevated levels in spring. Peak concentrations of ozone were observed during summer and beginning of fall. Our study concluded that several types of inhalable airborne fungi and pollen, particulate matter, and ozone could be positively correlated as a result of the atmospheric temperature influence.     

The size distribution of organic carbon in headwater streams in the Amazon basin

Despite the strong representativeness of streams in the Amazon basin, their role in the accumulation of coarse particulate organic carbon (CPOC), fine particulate organic carbon (FPOC), and dissolved organic carbon (DOC) in transport, an important energy source in these environments, is poorly known. It is known that the arboreal vegetation in the Amazon basin is influenced by soil fertility and rainfall gradients, but would these gradients promote local differences in organic matter in headwater streams? To answer this question, 14 low-order streams were selected within these gradients along the Amazon basin, with extensions that varied between 4 and 8 km. The efficiency of the transformation of particulate into dissolved carbon fractions was assessed for each stream. The mean monthly benthic organic matter storage ranged between 1.58 and 9.40 t ha^?1 month^?1. In all locations, CPOC was the most abundant fraction in biomass, followed by FPOC and DOC. Rainfall and soil fertility influenced the distribution of the C fraction (p?=?0.01), showing differentiated particulate organic carbon (POC) storage and DOC transportation along the basin. Furthermore, the results revealed that carbon quantification at the basin level could be underestimated, ultimately influencing the global carbon calculations for the region. This is especially due to the fact that the majority of studies consider only fine particulate organic matter and dissolved organic matter, which represent less than 50 % of the stored and transported carbon in streambeds.     

Quantifying emissions of primary biological aerosol particle mass in Europe

Atmospheric concentration measurements of tracers for primary biological aerosol particles (PBAPs) have been used to obtain estimates of their release into the atmosphere. Emission flux data of surrogate compounds, for which concurrent concentration measurements were available, were used to quantify the release of PBAPs as PM₁₀ mass. Results indicate fungal spores to be the most important contributors. One other main source is plant debris. Area-based emission rates of 24 kg km^?2 and year (range 6–90) have been assessed. Results scaled for Europe indicate a contribution of PBAPs to PM₁₀ concentrations in the low percentage range, with a maximum in summer when concentration levels are small. This is consistent with the range of measurements. Despite of the large uncertainties, results contribute to clarify the potential contribution of biological particles to global load of particle mass.     

An analytical method for the measurement of nonviable bioaerosols.

Exposures from indoor environments are a major issue for evaluating total long-term personal exposures to the fine fraction (<2.5 microm in aerodynamic diameter) of particulate matter (PM). It is widely accepted in the indoor air quality (IAQ) research community that biocontamination is one of the important indoor air pollutants. Major indoor air biocontaminants include mold, bacteria, dust mites, and other antigens. Once the biocontaminants or their metabolites become airborne, IAQ could be significantly deteriorated. The airborne biocontaminants or their metabolites can induce irritational, allergic, infectious, and chemical responses in exposed individuals. Biocontaminants, such as some mold spores or pollen grains, because of their size and mass, settle rapidly within the indoor environment. Over time they may become nonviable and fragmented by the process of desiccation. Desiccated nonviable fragments of organisms are common and can be toxic or allergenic, depending upon the specific organism or organism component. Once these smaller and lighter fragments of biological PM become suspended in air, they have a greater tendency to stay suspended. Although some bioaerosols have been identified, few have been quantitatively studied for their prevalence within the total indoor PM with time, or for their affinity to penetrate indoors. This paper describes a preliminary research effort to develop a methodology for the measurement of nonviable biologically based PM, analyzing for mold and ragweed antigens and endotoxins. The research objectives include the development of a set of analytical methods and the comparison of impactor media and sample size, and the quantification of the relationship between outdoor and indoor levels of bioaerosols. Indoor and outdoor air samples were passed through an Andersen nonviable cascade impactor in which particles from 0.2 to 9.0 microm were collected and analyzed. The presence of mold, ragweed, and endotoxin was found in all eight size ranges. The presence of respirable particles of mold and pollen found in the fine particle size range from 0.2 to 5.25 microm is evidence of fragmentation of larger source particles that are known allergens.     

Site Sampling and Treatability Studies for Demonstration of WasteChem’s Asphalt Encapsulation Technology Under EPA’s SITE Program

ABSTRACT

Exposures from indoor environments are a major issue for evaluating total long-term personal exposures to the fine fraction (<2.5μm in aerodynamic diameter) of particulate matter (PM). It is widely accepted in the indoor air quality (IAQ) research community that biocontamination is one of the important indoor air pollutants. Major indoor air biocontaminants include mold, bacteria, dust mites, and other antigens. Once the biocontaminants or their metabolites become airborne, IAQ could be significantly deteriorated. The airborne biocontaminants or their metabolites can induce irritational, allergic, infectious, and chemical responses in exposed individuals.

Biocontaminants, such as some mold spores or pollen grains, because of their size and mass, settle rapidly within the indoor environment. Over time they may become nonviable and fragmented by the process of desiccation. Desiccated nonviable fragments of organisms are common and can be toxic or allergenic, depending upon the specific organism or organism component. Once these smaller and lighter fragments of biological PM become suspended in air, they have a greater tendency to stay suspended. Although some bioaerosols have been identified, few have been quantitatively studied for their prevalence within the total indoor PM with time, or for their affinity to penetrate indoors.

This paper describes a preliminary research effort to develop a methodology for the measurement of nonvi-able biologically based PM, analyzing for mold and ragweed antigens and endotoxins. The research objectives include the development of a set of analytical methods and the comparison of impactor media and sample size, and the quantification of the relationship between outdoor and indoor levels of bioaerosols. Indoor and outdoor air samples were passed through an Andersen nonviable cascade impactor in which particles from 0.2 to 9.0 um were collected and analyzed. The presence of mold, ragweed, and endotoxin was found in all eight size ranges. The presence of respirable particles of mold and pollen found in the fine particle size range from 0.2 to 5.25 um is evidence of fragmentation of larger source particles that are known allergens.     

Source apportionment of PM10 in six cities of northern China

Ambient PM₁₀ was sampled in six northern China cities (Urumqi, Yinchuan, Taiyuan, Anyang, Tianjin and Jinan) from December 1999 to July 2002, and analyzed for 16 chemical elements, two water-soluble ions, total carbon, and organic carbon. In addition, chemical source profiles consisting of the same particulate components were obtained from a number of naturally occurring geological sources (soil dust from exposed lands) and sources of atmospheric particulates resulting from human activities (resuspended dust, cement, coal combustion fly ash, vehicle exhaust, and secondary particles). Ambient and source data were used in a chemical mass balance (CMB) receptor model to determine the major source of PM₁₀ in these six cities. Results of CMB modeling showed that the major source of ambient PM₁₀ in all the cities was resuspended dust. Significant contributions from coal fly ash were also found in all six cities.     

An evaluation of the protein mass of particulate matter

This research study provides the characterization of mass percent of protein-based particulate matter in total ambient particulate matter collected in a metropolitan area of NC. The project determined the percentages of protein-based ambient bioaerosols for particles in the 2.5–10 μm range and for particles in the range of 2.5 μm or less in 298 samples taken over a six-month period. The analysis of total protein mass was used as an all-inclusive indicator of biologically based aerosols. These organic bioaerosols may have nucleated with inorganic non-biological aerosols, or they may be combined with inert aerosols. The source of these bioaerosols may be any combination of pollen, mold, bacteria, insect debris, fecal matter, or dander, and they may induce irritational, allergic, infectious, and chemical responses in exposed individuals. Ambient samples of PM_2.5 and PM_10−2.5 were analyzed for gravimetric mass and total protein mass. The results for 19 of 24 sample periods indicated that between 1% and 4% of PM_10−2.5 and between 1% and 2% of PM_2.5 mass concentrations were made of ambient protein bioaerosols. (The remaining 5 of 24 sample periods yielded protein results which were below detectable limits.)     

Source identification analysis for the airborne bacteria and fungi using a biomarker approach

Our recent studies have reported the feasibility of employing the 3-hydoxy fatty acids (3-OH FAs) and ergosterol as biomarkers to determine the loading of the airborne endotoxin from the Gram-negative bacteria and fungal biomass in atmospheric aerosols, respectively [Lee, A.K.Y., Chan, C.K., Fang, K., Lau, A.P.S., 2004. The 3-hydroxy fatty acids as biomarkers for quantification and characterization of endotoxins and Gram-negative bacteria in atmospheric aerosols in Hong Kong. Atmospheric Environment 38, 6807–6317; Lau, A.P.S., Lee, A.K.Y., Chan, C.K., Fang, K., 2006. Ergosterol as a biomarker for the quantification of the fungal biomass in atmospheric aerosols. Atmospheric Environment 40, 249–259]. These quantified biomarkers do not, however, provide information on their sources. In this study, the year-long dataset of the endotoxin and ergosterol measured in Hong Kong was integrated with the common water-soluble inorganic ions for source identification through the principal component analysis (PCA) and backward air mass trajectory analysis. In the coarse particles (PM_2.5–10), the bacterial endotoxin is loaded in the same factor group with Ca²⁺ and accounted for about 20% of the total variance of the PCA. This implies the crustal origin for the airborne bacterial assemblage. The fungal ergosterol in the coarse particles (PM_2.5–10) had by itself loaded in a factor group of 10.8% of the total variance in one of the sampling sites with large area of natural vegetative coverage. This suggests the single entity nature of the fungal spores and their independent emission to the ambient air upon maturation of their vegetative growth. In the fine particles (<PM_2.5), the endotoxin and ergosterol associated closely with K⁺ and accounted for 34–38% of the total variance in the two sites studied. The K⁺/Na⁺ ratio is indicative of the possible sources of K⁺, which in turn, provides information on the sources of the associated endotoxin and ergosterol. High K⁺/Na⁺ ratios (>2.0) in the fine particles of the continental air masses imply the microbial source from activities related to biomass burning and industries from the north. The low K⁺/Na⁺ ratios (1.2–1.4) in the fine particles of the mixed air masses suggest microbial sources from the local and regional indoor environment through kitchen emissions and the re-suspension of the road dust due to vehicular exhausts.     

Characterization of indoor particle sources using continuous mass and size monitors

A comprehensive indoor particle characterization study was conducted in nine Boston-area homes in 1998 in order to characterize sources of PM in indoor environments. State-of-the-art sampling methodologies were used to obtain continuous PM2.5 concentration and size distribution particulate data for both indoor and outdoor air. Study homes, five of which were sampled during two seasons, were monitored over week-long periods. Among other data collected during the extensive monitoring efforts were 24-hr elemental/organic carbon (EC/OC) particulate data as well as semi-continuous air exchange rates and time-activity information. This rich data set shows that indoor particle events tend to be brief, intermittent, and highly variable, thus requiring the use of continuous instrumentation for their characterization. In addition to dramatically increasing indoor PM2.5 concentrations, these data demonstrate that indoor particle events can significantly alter the size distribution and composition of indoor particles. Source event data demonstrate that the impacts of indoor activities are especially pronounced in the ultrafine (da < or = 0.1 micron) and coarse (2.5 < or = da < or = 10 microns) modes. Among the sources of ultrafine particles characterized in this study are indoor ozone/terpene reactions. Furthermore, EC/OC data suggest that organic carbon is a major constituent of particles emitted during indoor source events. Whether exposures to indoor-generated particles, particularly from large short-term peak events, may be associated with adverse health effects will become clearer when biological mechanisms are better known.     

Updating the conceptual model for fine particle mass emissions from combustion systems

Atmospheric transformations determine the contribution of emissions from combustion systems to fine particulate matter (PM) mass. For example, combustion systems emit vapors that condense onto existing particles or form new particles as the emissions are cooled and diluted. Upon entering the atmosphere, emissions are exposed to atmospheric oxidants and sunlight, which causes them to evolve chemically and physically, generating secondary PM. This review discusses these transformations, focusing on organic PM. Organic PM emissions are semi-volatile at atmospheric conditions and thus their partitioning varies continuously with changing temperature and concentration. Because organics contribute a large portion of the PM mass emitted by most combustion sources, these emissions cannot be represented using a traditional, static emission factor. Instead, knowledge of the volatility distribution of emissions is required to explicitly account for changes in gas-particle partitioning. This requires updating how PM emissions from combustion systems are measured and simulated from combustion systems. Secondary PM production often greatly exceeds the direct or primary PM emissions; therefore, secondary PM must be included in any assessment of the contribution of combustion systems to ambient PM concentrations. Low-volatility organic vapors emitted by combustion systems appear to be very important secondary PM precursors that are poorly accounted for in inventories and models. The review concludes by discussing the implications that the dynamic nature of these PM emissions have on source testing for emission inventory development and regulatory purposes. This discussion highlights important linkages between primary and secondary PM, which could lead to simplified certification test procedures while capturing the emission components that contribute most to atmospheric PM mass.     

Urban-Center CO Air Quality Projections

The distribution of mutagenic activity and nitroaromatic components of polycyclic organic matter (POM) in ambient air at industrial, urban, suburban, rural, and remote sites was studied using organic extracts from high volume aerosol samples. Direct-acting mutagens including 1-nitropyrene (1-NP), dinitropyrenes (DNP), and hydroxynitropyrenes (HNP) were measured by high performance liquid chromatography while the mutagenicity was determined in the Salmonella bioassay with strain TA-98. Benzo(a)pyrene (BaP), one of the possible precursors of nitroaromatic compounds in POM, was also measured. In comparing samples from a range of sites, TSP and the concentration of BaP per mass of particulate matter decreased, as expected, at greater distances from urban and industrial combustion sources. However, the concentrations of polar nitroaromatic POM compounds per mass of particles were higher at a remote site than in nonindustrial urban and suburban areas. The mutagenicity in particulate matter extracts from the remote area was predominantly (>90 percent) in the very polar fractions. There were also high atmospheric levels of nitroaromatic compounds and mutagenicity in heavily industrialized areas. These observations may reflect the influences of source emissions, atmospheric transformations of POM compounds, and ther atmospheric processes on the composition of ambient suspended particulate matter.     

A study of air pollutants and acute asthma exacerbations in urban areas: status report

A study to try to better understand the interactions between various air contaminants and acute asthma exacerbations is described. The study evaluates temporal associations between a panel of air contaminants and acute asthmatic exacerbations as measured by emergency room visits for asthma in communities in the Bronx and Manhattan in New York City (NYC). In addition, ambient levels of various air pollutants in two NYC communities are being compared. Almost 2 years of daily data have been collected for most of the air contaminants to be investigated. The air contaminants measured include gaseous compounds (ozone, sulfur dioxide, nitrogen oxides, aldehydes, nitrous acid, nitric acid, hydrochloric acid and ammonia), particulate matter components (metals, elemental and organic carbon, sulfate, hydrogen ion, pollen, mold spores and particle mass and number).     

Characterization of Indoor Particle Sources Using Continuous Mass and Size Monitors

ABSTRACT

A comprehensive indoor particle characterization study was conducted in nine Boston-area homes in 1998 in order to characterize sources of PM in indoor environments. State-of-the-art sampling methodologies were used to obtain continuous PM_2.5 concentration and size distribution particulate data for both indoor and outdoor air. Study homes, five of which were sampled during two seasons, were monitored over week-long periods. Among other data collected during the extensive monitoring efforts were 24hr elemental/organic carbon (EC/OC) particulate data as well as semi-continuous air exchange rates and time-activity information.

This rich data set shows that indoor particle events tend to be brief, intermittent, and highly variable, thus requiring the use of continuous instrumentation for their characterization. In addition to dramatically increasing indoor PM₂₅ concentrations, these data demonstrate that indoor particle events can significantly alter the size distribution and composition of indoor particles. Source event data demonstrate that the impacts of indoor activities are especially pronounced in the ultrafine (d_a < 0.1 um) and coarse (2.5 < d_a < 10 |um) modes. Among the sources of ultrafine particles characterized in this study are indoor ozone/terpene reactions. Furthermore, EC/OC data suggest that organic carbon is a major constituent of particles emitted during indoor source events. Whether exposures to indoor-generated particles, particularly from large short-term peak events, may be associated with adverse health effects will become clearer when biological mechanisms are better known.     

Characteristics of particulate matter emissions from toy cars with electric motors

Aerosol emissions from toy cars with electric motors were characterized. Particle emission rates from the toy cars, as high as 7.47 × 10⁷ particles/s, were measured. This emission rate is lower than other indoor sources such as smoking and cooking. The particles emitted from toy cars are generated from spark discharges inside the electric motors that power the toy cars. Size distribution measurements indicated that most particles were below 100 nm in diameter. Copper was the dominant inorganic species in these particles. By deploying aerosol mass spectrometers, high concentrations of particulate organic matter were also detected and characterized in detail. Several organic compounds were identified using a thermal desorption aerosol gas chromatography. The mass size distribution of particulate organic matter was bimodal. The formation mechanism of particulate organic matter from toy cars was elucidated.

Implications:?A possible new source of indoor air pollution, particles from electric motors in toy cars, was identified. This study characterized aerosol emissions from toy cars in detail. Most of these particles have a diameter less than 100 nm. Copper and some organics are the major components of these particles. Conditions that minimize these emissions were determined.     

Organic aerosol source apportionment from highly time-resolved molecular composition measurements

Organic molecular composition measurements with 3.5 min time resolution were performed with the photoionization aerosol mass spectrometer (PIAMS) over an 18-day period in October–November 2007 in Wilmington, Delaware, USA. Mass spectra were obtained for a total of 6244 time periods, and the signal intensities of 60 specific m/z ratios corresponding to key organic molecular species were modeled by positive matrix factorization (PMF). Six factors were identified that could be tentatively linked to specific sources (diesel exhaust, car emissions/road dust, meat cooking) or types of compounds (alkanes/alkanoic acids, phthalates, PAHs). Owing to the inherent high time resolution of PIAMS, the temporal (diurnal) and wind direction dependencies of these factors could be examined in detail to assess the impacts of point sources and atmospheric processes. Time-resolved EC/OC and gas-phase data (O₃, NO_x, CO) were also obtained during the measurement period to help distinguish primary (POC) and secondary (SOC) organic carbon. The total organic carbon (TOC) concentration averaged 2.6 μg m^?3 during the measurement period and most (>90%) was classified as primary. Of this, approximately one-third could be assigned as combustion POC and the other two-thirds as non-combustion POC. The PMF results were combined with EC/OC data for source apportionment. The diesel and car/road dust factors together represented about two-thirds of TOC, while the alkane/alkanoic acid and meat cooking factors contributed most of the remaining one-third. The phthalate and PAH factors contributed very little, only a few percent of the total. The diesel factor correlated most strongly to combustion POC, while the sum of the remaining factors correlated well with non-combustion POC.     

Source contributions to the mutagenicity of urban particulate air pollution

Using organic compounds as tracers, a chemical mass balance model was employed to investigate the relationship between the mutagenicity of the urban organic aerosol sources and the mutagenicity of the atmospheric samples. The fine particle organic mass concentration present in the 1993 annual average Los Angeles-area composite sample was apportioned among eight emission source types. The largest source contributions to fine particulate organic compound mass concentration were identified as smoke from meat cooking, diesel-powered vehicle exhaust, wood smoke, and paved road dust. However, the largest source contributions to the mutagenicity of the atmospheric sample were natural gas combustion and diesel-powered vehicles. In both the human cell and bacterial assay systems, the combined mutagenicity of the composite of primary source effluents predicted to be present in the atmosphere was statistically indistinguishable from the mutagenicity of the actual atmospheric sample composite. Known primary emissions sources appear to be capable of emitting mutagenic organic matter to the urban atmosphere in amounts sufficient to account for the observed mutagenicity of the ambient samples. The error bounds on this analysis, however, are wide enough to admit to the possible importance of additional mutagenic organics that are formed by atmospheric reaction (e.g., 2-nitrofluoranthene has been identified as an important human cell mutagen in the atmospheric composite studied here, accounting for approximately 1% of the total sample mutagenic potency).     

Insights into the primary–secondary and regional–local contributions to organic aerosol and PM2.5 mass in Pittsburgh,Pennsylvania

This paper presents chemical mass balance (CMB) analysis of organic molecular marker data to investigate the sources of organic aerosol and PM_2.5 mass in Pittsburgh, Pennsylvania. The model accounts for emissions from eight primary source classes, including major anthropogenic sources such as motor vehicles, cooking, and biomass combustion as well as some primary biogenic emissions (leaf abrasion products). We consider uncertainty associated with selection of source profiles, selection of fitting species, sampling artifacts, photochemical aging, and unknown sources. In the context of the overall organic carbon (OC) mass balance, the contributions of diesel, wood-smoke, vegetative detritus, road dust, and coke-oven emissions are all small and well constrained; however, estimates for the contributions of gasoline-vehicle and cooking emissions can vary by an order of magnitude. A best-estimate solution is presented that represents the vast majority of our CMB results; it indicates that primary OC only contributes 27±8% and 50±14% (average±standard deviation of daily estimates) of the ambient OC in the summer and winter, respectively. Approximately two-thirds of the primary OC is transported into Pittsburgh as part of the regional air mass. The ambient OC that is not apportioned by the CMB model is well correlated with secondary organic aerosol (SOA) estimates based on the EC-tracer method and ambient concentrations of organic species associated with SOA. Therefore, SOA appears to be the major component of OC, not only in summer, but potentially in all seasons. Primary OC dominates the OC mass balance on a small number of nonsummer days with high OC concentrations; these events are associated with specific meteorological conditions such as local inversions. Primary particulate emissions only contribute a small fraction of the ambient fine-particle mass, especially in the summer.     

Microscopical TSP studies comparing a city centre and suburban sites in Canberra,Australia

A study of total suspended particulate (TSP) levels in Canberra has been carried out using light microscopy, transmission electron microscopy (TEM) and microprobe analysis. A significant source of the fine particulates as well as the greater part of black amorphous particles > 2 μm in city centre samples has been traced by TEM observation to be car emissions. In the suburban site of Kambah TEM displayed charcoal in the black amorphous particles. Further studies using microprobe analysis have shown Pb-Br content in all the fine particulates in the city samples whereas none have been detected in Kambah due to their low concentrations (the presence of small amounts of high electron-dense crystals was visible in TEM observations of Kambah samples). However, high Pb concentrations at both sites correlate well with the fine fraction, indicating that care needs to be taken in interpreting the microprobe results. A strong positive correlation exists between high H/C atomic ratios and the presence of partly burned hydrocarbons containing embedded lead as observed in electron microscopy and microprobe analysis, and between low H/C atomic ratios and the presence of charcoal visible in TEM. For the organic particles from natural sources seasonal peaks of pollen, fungal remains and plant tissue are evident in both localities. Particles of mineral or crustal source form similar peaks in samples from both localities, probably reflecting dry windy conditions. A comparison between TSP results and microscopic results reveals serious problems with using TSP standards as measures of respirable health effects.     

Natural background visibility and regional haze goals in the Southeastern United States

The goal of the regional haze mitigation program in the United States is to attain "natural conditions" in national parks and wilderness areas by 2064. Results of research investigations on background concentrations of sea salt and biogenic organic matter, of episodic Saharan and Asian dust, and of carbon from natural fires were reviewed to provide a basis for making site-specific estimates of what the concentrations of atmospheric fine particulate matter components might be under natural conditions in the Southeastern United States. Based on this review, rough estimates were made of potential contributions of these aerosol components to natural background visibility. Natural organic particles were the dominant influence on the rate of visibility improvement required to reach natural conditions at an inland, mountainous location, and organic particles and sea salt were the dominant influences on the rate at a coastal location. African dust also had a large episodic effect, but the current regulatory approach is not designed to address episodic background variations. Insufficient data exist to quantify the contributions of wildfires with any detail, although global air pollution modeling provides insight, and their emissions can be locally dominant. Conservative regional refinements to the default natural background estimates do not greatly alter the region-wide rates of reduction of ambient particulate matter concentrations that will be needed to accomplish the first phase of the regional haze program. However, refinements at specific Class I areas may have considerable influence on defining the nature (magnitude and spatial and temporal distribution) of local emission reduction efforts there.