Decomposed Gosling Feet Provide Evidence of Insecticide Exposure

Canada goose goslings were exposed to turf sprayed with DZN diazinon 50W application (2.24 kg a.i./ha). The control plot was subjected to a water application. One foot from each bird was placed outdoors for 7 d to decompose and the other foot was kept frozen. Diazinon residues were analyzed on both feet. Results showed that diazinon was detected from undecomposed and decomposed feet of the birds. Diazinon residues were below the level of detection (<0.01 ppm, a.i.) on the feet from the control goslings. Decomposed feet may be used for determining insecticide exposure when the traditional matrices are not available.     

European bee-eater (Merops apiaster) populations under arsenic and metal stress: evaluation of exposure at a mining site

Two populations of the European bee-eater were studied, one living at a reference site and the other at a metal mining site. The concentration of arsenic and 11 metals (Al, Cd, Co, Cr, Cu, Fe, Hg, Mn, Ni, Pb, and Zn) was measured in feathers and regurgitated pellets collected at both sites. Cadmium, chromium, mercury, nickel, and lead were at least twofold higher in feathers of birds from the contaminated site than in the reference site, suggesting that this population was exposed to higher metal levels. Similarly, levels of aluminum, arsenic, cadmium, cobalt, chromium, iron, and lead were also at least twofold higher in pellets from the contaminated area. The obtained results suggested that the impacted population of Merops apiaster is at risk due to the exposure to some metals.     

A method for measuring dermal exposure to multifunctional acrylates

UV-curable acrylates are used increasingly for coating wood surfaces in the furniture industry. One of the active components, tripropylene glycol diacrylate (TPGDA), is known to be both an allergen and irritant to the skin. Methods to measure dermal exposure to skin irritants and allergens, such as acrylates, are insufficient for exposure assessment and there is none for this compound. The aim of this investigation was to develop a skin and surface sampling method, based on tape stripping, and a gas chromatographic method for quantitative analysis for assessing occupational skin exposure to multifunctional acrylates. Twelve adhesives were tested for their efficiency to remove TPGDA and UV-coating from a glass surface, the skin of guinea pigs and human volunteers employing the tape-stripping method in order to find the best performing tape. Variables that affect removal efficiency such as the applied dose and its retention time on the skin, tape adhesion time on the skin, and the number of strippings required to detect the contaminant from the skin were studied. Fixomull tape performed the best during sampling and analysis and had the most consistent removal efficiencies for the studied substances. The average removal efficiency with a single stripping at the 2 microliters TPGDA exposed skin sites was 85% (RSD = 14.1), and for UV-resin exposed sites 63% (RSD = 20.2). The results indicated that this method can be used for measuring dermal exposure to multifunctional acrylates efficiently, accurately, and economically. This method provides a sensitive and powerful tool for the assessment of dermal exposure to multifunctional acrylates both from the skin and from other contaminated surfaces in occupational field settings.     

Development and application of quantitative methods for monitoring dermal and inhalation exposure to propiconazole

Quantitative methods to measure dermal and inhalation exposure to the fungicide propiconazole were developed in the laboratory and applied in the occupational exposure setting for monitoring five farm workers' exposure during pesticide preparation and application to peach crops. Dermal exposure was measured with tape-strips applied to the skin, and the amount of propiconazole was normalized to keratin content in the tape-strip. Inhalation exposure was measured with an OVS tube placed in the worker's breathing-zone during pesticide handling. Samples were analyzed by GC-MS in EI+ mode (limit of detection 6 pg microl(-1)). Dermal exposure ranged from non-detectable to 32.1 +/- 22.6 ng per microg keratin while breathing-zone concentrations varied from 0.2 to 2.2 microg m(-3). A positive correlation was observed between breathing-zone concentrations and ambient air temperature (r2 = 0.87, p < 0.01). Breathing-zone concentrations did not correlate with dermal exposure levels (r2 = 0.11, p = 0.52). Propiconazole levels were below limit of detection when rubber gloves, coveralls, and full-face mask were used. The total-body propiconazole dose, determined for each worker by summing the estimated dermal dose and inhalation dose, ranged from 0.01 to 12 microg per kg body weight per day. Our results show that tape-stripping of the skin and the OVS can be effectively utilized to measure dermal and inhalation exposure to propiconazole, respectively, and that the dermal route of exposure contributed substantially more to the total dose than the inhalation route.     

Assessment of dermal exposure to benzene and toluene in shoe manufacturing by activated carbon cloth patches

OBJECTIVES: The aim of this investigation was to use activated carbon cloth (ACC) patches to study the probability and extent of dermal exposure to benzene and toluene in a shoe factory. METHODS: Inhalation and dermal exposure loading were measured simultaneously in 70 subjects on multiple days resulting in 113 observations. Dermal exposure loading was assessed by ACC patches attached to likely exposed skin areas (e.g. the palm of the hand and abdomen). A control patch at the chest and an organic vapor monitor (OVM) were used to adjust the hand and abdomen patches for the contribution from the air through passive absorption of benzene and toluene on the ACC patches. Systemic exposure was assessed by quantification of unmetabolized benzene (UBz) and toluene (UTol) in urine. RESULTS: Mean air concentrations for the study population were 1.5 and 7.5 ppm for benzene and toluene, respectively. Iterative regression analyses between the control patch, OVM and the dermal patches showed that only a small proportion of the ACC patches at the hand had likely benzene (n = 4; mean 133 microg cm(-2) h(-1)) or toluene (n = 5; mean 256 microg cm(-2) h(-1)) contamination. Positive patches were exclusively observed among subjects performing the task of gluing. Significant dermal exposure loading to the abdomen was detected only for toluene (n = 2; mean 235 microg cm(-2) h(-1)). No relation was found between having a positive hand or abdomen ACC patch and UBz or UTol levels. In contrast a strong association was found between air levels of benzene (p = 0.0016) and toluene (p < 0.0001) and their respective urinary levels. CONCLUSIONS: ACC patches are shown to be a useful technique for quantifying the probability of dermal exposure to organic solvents and to provide estimates of the potential contribution of the dermal pathway to systemic exposure. Using ACC patches we show that dermal exposure to benzene and toluene in a shoe manufacturing factory is probably rare, and when it occurred exposures were relatively low and did not significantly contribute to systemic exposure.     

Bird skins in museum collections: are they suitable as indicators of environmental metal load after conservation procedures?

To find out whether modern conservation treatments alter thelevel of metals in feathers, we analysed the content of 10metals in feathers before and after skins were washed withdetergent and treated with Eulan U-33 (a commonly usedpreservative at museums). Feathers of 31 birds of Goshawk Accipiter gentilis, Eagle Owl Bubo bubo, Feral PigeonColumba livia domest. and Common Eider Somateriamollissima were analysed. We found that in most cases metalswere partly washed out of the feathers, but the effects wererelated to species and type of feather. The value of bird skinsas indicators of environmental metal load is therefore affectedby this treatment. It is recommended that the conservationtechniques used at museums should be reconsidered if skins areintended for specimen banking for future reference inenvironmental monitoring schemes and research.     

Biogas from poultry waste—production and energy potential

The objective of this study was to evaluate the effect of heat treatment on poultry litter with different levels of reutilisation for potential generation of biogas in experimental biodigesters. Chicken litter used was obtained from two small-scale poultry houses where 14 birds m^?2 were housed for a period of 42 days per cycle. Litter from aviary 1 received no heat treatment while each batch of litter produced from aviary 2 underwent a fermentation process. For each batch taken, two biodigesters were set for each aviary, with hydraulic retention time of 35 days. The efficiency of the biodigestion process was evaluated by biogas production in relation to total solids (TS) added, as well as the potential for power generation. Quantified volumes ranged from 8.9 to 41.1 L of biogas for aviary 1, and 6.7 to 33.9 L of biogas for aviary 2, with the sixth bed reused from both aviaries registering the largest biogas potential. Average potential biogas in m³ kg^?1 of TS added were 0.022 to 0.034 for aviary 1 and 0.015 to 0.022 for aviary 2. Energy values ??of biogas produced were calculated based on calorific value and ranged from 0.06 to 0.33 kWh for chicken litter without fermentation and from 0.05 to 0.27 kWh for chicken litter with fermentation. It was concluded that the re-use of poultry litter resulted in an increase in biogas production, and the use of fermentation in the microbiological treatment of poultry litter seems to have negatively influenced production of biogas.     

Penetration patterns of monomeric and polymeric 1,6-hexamethylene diisocyanate monomer in human skin

We investigated penetration patterns of monomeric and polymeric 1,6-hexamethylene diisocyanate (HDI), experimentally and as part of commercial products, in excised full-thickness human skin at 5, 10, 30, or 60 min after exposure. We observed that both monomeric and polymeric HDI were readily absorbed into the skin and that the clearcoat composition affects the penetration rate of the individual isocyanates. The short-term absorption rates for HDI monomer, biuret, and isocyanurate were determined and used to estimate the exposure time required to reach a body burden equal to the American Conference of Governmental Industrial Hygienists (ACGIH) inhalation threshold limit value (TLV) or Oregon State occupational exposure limit (OEL). Oregon is the only government entity in the United States to promulgate a short-term exposure limit (STEL) for HDI-based polyisocyanates biuret and isocyanurate. Based on these absorption rates for a slow-drying clearcoat after 10 min (1.33 μg cm(-2) h(-1)) or 60 min (0.219 μg cm(-2) h(-1)), we calculated that 6.5 and 40 min dermal exposure, respectively, is required to achieve a dose of HDI equivalent to the ACGIH TLV. For biuret, the time to achieve a dose equivalent to the Oregon OEL for slow-drying clearcoat was much shorter (<31 min) than that for fast-drying clearcoat (618 min). Isocyanurate had the shortest skin absorption times regardless of clearcoat formulation (14 s-1.7 min). These results indicate that the dose received through dermal exposure to HDI-containing clearcoats has a significant potential to exceed the dose equivalent to that received through inhalation exposure at established regulatory limits. A critical need exists to monitor dermal exposure quantitatively in exposed workers, to use proper protective equipment to reduce dermal exposure, and to re-evaluate regulatory exposure limits for isocyanates.     

Heavy metal and selenium levels in feathers of herring gulls (Larus argentatus): Differences due to year,gender, and age at Captree,Long Island

The concentrations of heavy metals (mercury, lead, cadmium, chromium, manganese) and selenium in the feathers of herring gulls (Larus argentatus) from a nesting colony at Captree, Long Island, New York were examined from 1989 to 1993 to determine if there were differences from year to year, and between males and females, adult and young, and dead versus live gulls. Variation in metal levels in regression models was explained by age (all metals), year (all except manganese), and whether the feathers were from live or dead birds (all except lead and chromium). The feathers of adults had significantly higher levels of mercury, lead and manganese than those of young, but lower levels of selenium and cadmium than those of young. Levels in down and fledgling feathers were similar for lead, cadmium and selenium, but fledgling feathers had higher levels for mercury, chromium, and manganese. There were no gender differences in metal levels for adult feathers except for lead (females had higher levels). Levels of mercury and manganese were higher in feathers of live adults whereas levels of cadmium and selenium were higher in the feathers of dead adults.     

Heavy metal and selenium levels in birds at Agassiz National Wildlife Refuge,Minnesota: Food chain differences

The levels of heavy metals and selenium in the eggs and in breast feathers of adult doublecrested cormorant (Phalacrocorax auritus), black-crowned night heron (Nycticorax nycticorax), and franklin's gull (Larus pipixcan) nesting at Agassiz National Wildlife Refuge in Marshall County, northwestern Minnesota were examined. Also examined were metal levels in the feathers of fledgling night herons and gulls, in the feathers of adult and fledgling American bittern (Botaurus lentiginosus), in eggs of American coot (Fulica americana) and eared grebe (Podiceps caspicus), and in feathers of adult Canada geese (Branta canadensis). These species represent different levels on the food chain from primarily vegetation-eating species (geese, coot) to species that eat primarily fish (cormorant). A clear, positive relationship between level on the food chain and levels of heavy metals occurred only for mercury in feathers and eggs. Otherwise, eared grebes had the highest levels of all other metals in their eggs compared to the other species. No clear food chain pattern existed for feathers for the other metals. For eggs at Agassiz: 1) lead, selenium, and manganese levels were similar to those reported in the literature, 2) mercury levels were slightly higher for cormorants and night herons, 3) all species had higher chromium and cadmium levels than generally reported, and 4) eared grebes had significantly higher levels of cadmium than reported for any species from elsewhere. For adult feathers: 1) gulls had higher levels of lead than the other species, 2) cadmium levels were elevated in gulls and adult herons and cormorants, 3) mercury levels showed an increase with position on the food chain, 4) selenium and chromium levels of all birds at Agassiz were generally low and 5) manganese levels in adults were generally higher than in the literature for other species. Adults had significantly higher mercury levels than fledgling gulls, night herons, and bitterns.     

A method for measuring the potential dermal exposure to methyl methacrylate during two different dental technical work tasks

Dental technicians are exposed on a daily basis to undiluted methyl methacrylate (MMA) when performing various routine tasks. Although the clinical effects of this chemical have been known for decades, no previous studies have been performed to estimate the potential dermal exposure to it. In this study we describe a patch-sampling technique to intercept the MMA that would otherwise have contaminated the skin on different parts of the hand and lower arm. Two different work tasks, making an orthodontic splint and denture preparation, were both performed under simulated workplace conditions twice by two recent graduated dental technicians. Air measurements were collected simultaneously. The results indicate that the exposure patterns associated with producing an orthodontic splint and denture preparation differed. We found work task-dependent differences in the amounts of MMA collected at the different parts of each hand, and differences between the right and left hands. There was also an interaction between hand and work task, especially for the right hand. The air measurements were positively correlated with the dermal exposure. This study highlights the importance of using a measurement strategy that takes the variability within the hand/arm body parts into account when measuring potential exposure during these kinds of work tasks. In order to establish future dermal exposure limits, more workplace and experimental studies are required.     

Metals in feathers of brown noddy (Anous stolidus): Evidence for bioaccumulation or exposure levels?

Levels of environmental pollution are generally assumed to be greater in nearshore and estuarine habitats compared to the open ocean. This difference presumably derives from high inputs from industrial and agricultural sources entering estuaries and bays from rivers and as direct runoff. This suggests that levels of heavy metals should be higher in birds that obtain their food resources from nearshore habitats rather than the open ocean far from land. I compared the levels of lead, cadmium, mercury and selenium in feathers of young and adult brown noddies (Anous stolidus) along the coast of Oahu, Hawaii. Prior to fledging, young noddies obtain all their food resources from their parents that bring back fish and squid from a few km offshore, whereas adults spend much of the year outside the breeding season on the open ocean, where they obtain most of the metals that accumulate in their feathers. For all metals, the young noddies had lower levels than adults. These data do not support the hypothesis that heavy metal pollution is greater nearshore than on the open ocean, but further investigation is needed to distinguish simple biaccumulation with age from differential exposure by habitat, and contamination from the birds own secretions during preening and from the outside.     

Evaluation of a tape-stripping technique for measuring dermal exposure to pyrene and benzo(a)pyrene

Epidemiological studies have shown an increased incidence of cancer among workers occupationally exposed to polycyclic aromatic hydrocarbons (PAHs). As the dermal route is considered important for exposure to PAHs in the workplace, the aim of this study was to develop and evaluate a tape-stripping technique for monitoring dermal exposure to pyrene and benzo(a)pyrene. The tape-stripping method was evaluated by applying different concentrations of pyrene and benzo(a)pyrene directly onto tape strips (spiked tapes), clean glass plates, and on the skin of five volunteers. The glass plates were stripped using a single strip of tape and the skin of the volunteers was stripped with five consecutive strips of tape after 0 and 30 minutes. The method was also tested on five chimney sweeps at three exposure sites. High-performance liquid chromatography with fluorescence detection was employed for the quantification of pyrene and benzo(a)pyrene. The mean recovery from the spiked tapes was 97% for pyrene and 93% for benzo(a)pyrene. The mean overall recovery from the glass plates was 88% and 76% for pyrene and 88 and 85% for benzo(a)pyrene. The recovery from human skin was 70% and 63% for pyrene and 60 and 54% for benzo(a)pyrene, after 0 and 30 minutes, respectively. A concentration gradient was clearly detected between the five consecutive strips. Detectable amounts of pyrene and benzo(a)pyrene were found on all chimney sweeps at all exposure sites. This method can thus be used to detect and quantify dermal exposure to pyrene and benzo(a)pyrene. The results also show that pyrene and benzo(a)pyrene may be taken up by the skin.     

Mineral and heavy metal contents of the outer and inner tissues of commonly used fruits

The rate of heavy metal pollution in some minor fruit samples growing at roadsides in Turkey were determined by inductively coupled plasma-atomic emission spectrometry (ICP-AES). The mineral contents of samples were found to be different depending on the several parts Citrus fruits. The highest minor and heavy metal levels for Citrus fruits were determined between 17.24 and 45.30 mg/kg boron, 2.08 and 15.05 mg/kg copper, 1.01 and 16.00 mg/kg iron and 2.35 and 9.87 mg/kg zinc. Boron content ranged from 16.54 mg/kg (Deveci pear inner pulp) to 89.89 mg/kg (Arjantin apple outer skin). The level of Fe ranged from 1.49 mg/kg (quince pulp) to 25.05 mg/kg (Ankara pear pulp). Cu content of fruits ranged between 2.52 mg/kg (Fuji apple skin) and 25.93 mg/kg quince skin). Zn content was found between 0.46 mg/kg (Golden apple pulp) and 14.34 mg/kg (quince skin). P contents ranged from 651 mg/kg (Golden apple pulp) to 1269 mg/kg (quince skin). Na was found between 500 mg/kg (Fuji apple skin) and 907 mg/kg (Arjantin apple skin).     

Lead and cadmium contaminations in feathers of heron and egret chicks

In birds, concentrations of heavy metal contaminants were associated with their diet and environmental quality. This study presents concentrations of lead and cadmium in feathers and the relationship between concentrations in the feather and stomach content of three species of heron and egret chicks. Cadmium concentrations were higher in the Little Egret (geomean 0.75 μg/g dry weight) and Black-crowned Night Heron (geomean 0.88 μg/g dry weight) chicks than in Grey Heron chicks (geomean 0.48 μg/g dry weight). Lead and cadmium concentrations had significant correlations between feathers and stomach contents of heron and egret chicks. The mean lead and cadmium concentrations in feathers were within the background levels for wild birds. Heron and egret species forage around breeding colony (4–7 km). Lead and cadmium concentrations in heron and egret chicks were moderately associated with those of prey concentrations. These results suggest that contaminant concentrations such as lead and cadmium in feathers of heron and egret chicks can reflect local heavy metal contaminations and serve as a great biological indicator for monitoring heavy metal contamination. In addition, the feathers can be a routine monitoring tool over time and space without harming the wild birds.     

Quantitative monitoring of dermal and inhalation exposure to 1,6-hexamethylene diisocyanate monomer and oligomers

Respiratory sensitization and occupational asthma are associated with exposure to 1,6-hexamethylene diisocyanate (HDI) in both monomeric and oligomeric forms. The monomer and polymers of diisocyanates differ significantly in their rates of absorption into tissue and their toxicity, and hence may differ in their contribution to sensitization. We have developed and evaluated a liquid chromatography/mass spectrometry (LC-MS) method capable of quantifying HDI and its oligomers (uretidone, biuret, and isocyanurate) in air, tape-stripped skin, and paint samples collected in the automotive refinishing industry. To generate analytical standards, urea derivatives of HDI, biuret, and isocyanurate were synthesized by reaction with 1-(2-methoxyphenyl)piperazine and purified. The urea derivatives were shown to degrade on average by less than 2% per week at -20 degrees C over a 2 month period in occupational samples. The average recovery of HDI and its oligomers from tape was 100% and the limits of detection were 2 and 8 fmol microl(-1), respectively. Exposure assessments were performed on 13 automotive spray painters to evaluate the LC-MS method and the sampling methods under field conditions. Isocyanurate was the most abundant component measured in paint tasks, with median air and skin concentrations of 2.4 mg m(-3) and 4.6 microg mm(-3), respectively. Log-transformed concentrations of HDI (r = 0.79, p < 0.0001) and of isocyanurate (r = 0.71, p < 0.0001) in the skin of workers were correlated with the log-transformed product of air concentration and painting time. The other polyisocyanates were detected on skin for less than 25% of the paint tasks. This LC-MS method provides a valuable tool to investigate inhalation and dermal exposures to specific polyisocyanates and to explore relative differences in the exposure pathways.     

Environmental contaminants in surrogates,foods, and feathers of California condors (Gymnogyps californianus)

California condor (Gymnogyps californianus) foods and feathers, and turkey vultures (Cathartes aura), common ravens (Corvus corax), and their eggs were collected within the condor range to determine exposure of condors to environmental contaminants. Samples were analyzed for organochlorines and trace elements. Food items contained low concentrations of organochlorines and generally low concentrations of lead. DDE was detected in all vulture carcasses and nearly all raven carcasses at generally moderate concentrations. Other organochlorines occurred infrequently in carcasses and generally at low concentrations. Turkey vulture eggshells were 16% thinner than the pre-DDT mean; there was no change in shell thickness of raven eggs. Vulture eggs contained an average of 6.9 ppm DDE and two contained excessive concentrations of endrin. DDE concentrations were low in raven eggs. Residues of As, Cd, Cr, Cu, Fe, Hg, Ni, Se, Tl, and Zn in tissues of vultures and ravens appeared normal when compared with reference values for other species. Lead concentrations in bone of turkey vultures and feathers of condors appeared to be elevated above normal background concentrations in some cases. Current exposure of condors to organochlorines appears low; however, we are concerned about the excessive exposure of turkey vultures to organochlorines, possibly in Central America. Lead exposure to vultures and condors has occurred, but its significance to their populations is unknown.     

monitoring bioaccumulation of contaminants in the belted kingfisher (ceryle alcyon)

The belted kingfisher (Ceryle alcyon), acommon piscivore in the eastern United States, hasbecome a common endpoint in ecological riskassessments (ERA) because of their high consumptionof potentially contaminated aquatic prey. Whilebioaccumulation data and biosurveys may be used tosupport conclusions of ERAs for kingfishers, thereare currently no published data on contaminantconcentrations in kingfishers. Additionally,methods available for collecting biological samples(e.g., feathers, eggs, food debris, etc.) fromkingfisher burrows can be detrimental to thereproductive success of the birds. We present amethod for obtaining samples from burrows during orfollowing the nesting season. The method wasapplied to kingfisher burrows on the Oak RidgeReservation (ORR) in eastern Tennessee. Feathers,eggshells, and nestlings were collected from burrows and analyzed. In addition, carcasses ofthree adult kingfishers found dead on the ORR wereanalyzed. Metals and radionuclides were accumulatedby both juvenile and adult birds. Body burdens ofcadmium, lead, and cesium-137 in adult birds were belowlevels associated with toxicity. Concentrations of selenium and mercury were observed at potentiallytoxic levels. Contaminants in eggshells andnestling feathers indicate exposure, however, thereis insufficient information to evaluate thetoxicological significance of this contamination.National Laboratory Oak Ridge National Laboratory is managed for the U.S. Department of Energy by Lockheed Martin Energy Research Corp. under contract DE-AC05-96OR22464     

Tape-stripping as a method for measuring dermal exposure to resin acids during wood pellet production

The purpose of this study was to develop a sensitive and specific method for quantifying dermal exposure to the resin acids 7-oxodehydroabietic acid (7-OXO), dehydroabietic acid (DHAA), abietic acid (AA), and pimaric acid (PA). In addition the method was evaluated in occupational settings during production of wood pellets. Tape-strips were spiked with the substances to evaluate the recovery of the acids from the tape. The removal efficiency of the tape was assessed by tape-stripping a specified area on a glass plate spiked with resin acids. The recovery of the acids from human skin in vivo was evaluated by applying acids in methanol onto the skin of volunteers. Occupational dermal exposure to the resin acids was assessed by tape-stripping the skin of workers involved in the production of wood pellets. The resin acids were analyzed by liquid chromatography mass spectrometry (LC-MS). The limit of detection was 15 pg (7-OXO), 150 pg (DHAA), 285 pg (AA) and 471 pg (PA) per injection. The recovery from spiked tapes was in general 100%. The removal efficiency of the tape was 48-101%. Recovery tests from human skin in vivo showed a mean recovery of 27%. Quantifiable amounts of resin acids were observed on four different skin areas with an increase in exposure during a work shift. This study shows that occupational dermal exposure to resin acids can be assessed by tape-stripping and quantified by LC-MS.     

Monitoring of heavy metal contaminants using feathers of shorebirds, Korea

This study presents concentrations of iron, zinc, copper, lead and cadmium in the feathers of 3 shorebird species (n = 29) from Okgu Mudflat, Korea in the East Asian-Australian Migration Flyways. Lead concentrations (ANOVA, p < 0.001) in Red-necked Stints (geomean = 9.61 μg g(-1) dry weight) were higher than in Terek Sandpipers (geomean = 5.56 μg g(-1) dry weight) which in turn were higher than in Great Knots (geomean = 2.78 μg g(-1) wet weight). Cadmium concentrations (ANOVA, p < 0.001) were higher in Great Knots (geomean = 2.97 μg g(-1) wet weight) and in Red-necked Stints (geomean = 2.70 μg g(-1) dry weight) than in Terek Sandpipers (geomean = 0.33 μg g(-1) dry weight). Lead (r = 0.574, p < 0.01) and cadmium (r = 0.380, p < 0.05) concentrations between feathers and livers of shorebirds were significantly correlated. Lead concentrations in 65.5% (19 individuals) of shorebirds exceeded a toxicity threshold for feathers (4 μg g(-1) dry weight). Iron, zinc, copper, lead and cadmium concentrations in feathers were within the range of earlier studies for wild birds, but lead concentrations in Red-necked Stints were higher than those reported in other studies. Because lead concentrations in feathers and livers of Red-necked Stints were markedly higher than in other shorebirds, we suggest that Red-necked Stints were exposed to higher lead concentrations than the other shorebirds on their breeding or wintering grounds.