Composition of heavy metals and airborne fibers in the indoor environment of a building during renovation

The renovation of a building will certainly affect the quality of air in the vicinity of where associated activities were undertaken, this includes the quality of air inside the building. Indoor air pollutants such as particulate matter, heavy metals, and fine fibers are likely to be emitted during renovation work. This study was conducted to determine the concentration of heavy metals, asbestos and suspended particulates in the Biology Building, at the Universiti Kebangsaan, Malaysia (UKM). Renovation activities were carried out widely in the laboratories which were located in this building. A low-volume sampler was used to collect suspended particulate matter of a diameter size less than 10 μm (PM??) and an air sampling pump, fitted with a cellulose ester membrane filter, were used for asbestos sampling. Dust was collected using a small brush and scope. The concentration of heavy metals was determined through the use of inductively coupled plasma-mass spectroscopy and the fibers were counted through a phase contrast microscope. The concentrations of PM?? recorded in the building during renovation action (ranging from 166 to 542 μg m?3) were higher than the value set by the Department of Safety and Health for respirable dust (150 μg m?3). Additionally, they were higher than the value of PM?? recorded in indoor environments from other studies. The composition of heavy metals in PM?? and indoor dust were found to be dominated by Zn and results also showed that the concentration of heavy metals in indoor dust and PM?? in this study was higher than levels recorded in other similar studies. The asbestos concentration was 0.0038 ± 0.0011 fibers/cc. This was lower than the value set by the Malaysian Department of Occupational, Safety and Health (DOSH) regulations of 0.1 fibers/cc, but higher than the background value usually recorded in indoor environments. This study strongly suggests that renovation issues need to be considered seriously by relevant stakeholders within the university in order to ensure that the associated risks toward humans and indoor environment are eliminated, or where this is not feasible, minimized as far as possible.     

Indoor air quality during renovation actions: a case study

A temporary renovation activity releases considerably high concentrations of particulate matter, viable and non-viable, into air. These pollutants are a potential contributor to unacceptable indoor air quality (IAQ). Particulate matter and its constituents lead, sulfate, nitrate, chloride, ammonium and fungi as well as fungal spores in air were evaluated in a building during renovation action. Suspended dust was recorded at a mean value of 6.1 mg m(-3) which exceeded the Egyptian limit values for indoor air (0.15 mg m(-3)) and occupational environments (5 mg m(-3)). The highest particle frequency (23%) of aerodynamic diameter (dae) was 1.7 microm. Particulate sulfate (SO(4)(2-)), nitrate (NO(3)(-)), chloride (Cl(-)), ammonium (NH(4)(+)) and lead components of suspended dust averaged 2960, 28, 1350, 100 and 13.3 microg m(-3), respectively. Viable fungi associated with suspended dust and that in air averaged 1.11 x 10(6) colony forming unit per gram (cfu g(-1)) and 92 colony forming unit per plate per hour (cfu p(-1) h(-1)), respectively. Cladosporium(33%), Aspergillus(25.6%), Alternaria(11.2%) and Penicillium(6.6%) were the most frequent fungal genera in air, whereas Aspergillus(56.8%), Penicillium(10.3%) and Eurotium(10.3%) were the most common fungal genera associated with suspended dust. The detection of Aureobasidium, Epicoccum, Exophiala, Paecilomyces, Scopulariopsis, Ulocladium and Trichoderma is an indication of moisture-damaged building materials. Alternaria, Aureobasidium, Cladosporium, Scopulariopsis and Nigrospora have dae > 5 microm whereas Aspergillus, Penicillium and Verticillium have dae < 5 microm which are suited to penetrate deeply into lungs. Particulate matter from the working area infiltrates the occupied zones if precautionary measures are inadequate. This may cause deterioration of IAQ, discomfort and acute health problems. Renovation should be carefully designed and managed, in order to minimize degradation of the indoor and outdoor air quality.     

Quantitative PCR analysis of fungi and bacteria in building materials and comparison to culture-based analysis

Prolonged moisture on building materials can lead to microbial growth on them. Microbes can emit spores, metabolites and structural parts into the indoor air and thus, cause adverse health effects of people living and working in these buildings. So far, culture methods have been used for assessment of microbial contamination of building materials. In this work, we used quantitative PCR (qPCR) for the detection of selected fungal and bacterial groups in 184 building materials of different types and compared the results with culture-based analysis. Nine either commonly found species, genera or groups of fungi, or those considered as moisture damage indicators, and one bacterial genus, Streptomyces, were determined using qPCR. Fungi and mesophilic actinomycetes were also cultivated using standard media and conditions of the routine analysis. The bacterial genus Streptomyces and the fungal group Penicillium/Aspergillus/Paecilomyces were the most prevalent microbial groups in all building material types, followed by Stachybotrys chartarum and Trichoderma viride/atroviride/koningii. The highest prevalences, concentrations and species diversity was observed on wooden materials. In general, the results of the two methods did not correlate well, since concentrations of fungi and streptomycetes were higher and their occurrence more prevalent when determined by qPCR compared to culture-based results. However, with increasing concentrations, the correlation generally increased. The qPCR assay did not detect Aspergillus versicolor and Acremonium strictum as often as culture.     

Biomonitoring of Lead, Zinc, and Cadmium in Streams Draining Lead-Mining and Non-Mining Areas, Southeast Missouri, USA

We evaluated exposure of aquatic biota to lead (Pb), zinc (Zn), and cadmium (Cd) in streams draining a Pb-mining district in southeast Missouri. Samples of plant biomass (detritus, periphyton, and filamentous algae), invertebrates (snails, crayfish, and riffle benthos), and two taxa of fish were collected from seven sites closest to mining areas (mining sites), four sites further downstream from mining (downstream sites), and eight reference sites in fall 2001. Samples of plant biomass from mining sites had highest metal concentrations, with means 10- to 60-times greater than those for reference sites. Mean metal concentrations in over 90% of samples of plant biomass from mining sites were significantly greater than those from reference sites. Mean concentrations of Pb, Zn, and Cd in most invertebrate samples from mining sites, and mean Pb concentrations in most fish samples from mining sites, were also significantly greater than those from reference sites. Concentrations of all three metals were lower in samples from downstream sites, but several samples of plant biomass from downstream sites had metal concentrations significantly greater than those from reference sites. Analysis of supplemental samples collected in the fall of 2002, a year of above-average stream discharge, had lower Pb concentrations and higher Cd concentrations than samples collected in 2001, near the end of a multi-year drought. Concentrations of Pb measured in fish and invertebrates collected from mining sites during 2001 and 2002 were similar to those measured at nearby sites in the 1970s, during the early years of mining in the Viburnum Trend. Results of this study demonstrate that long-term Pb mining activity in southeast Missouri has resulted in significantly elevated concentrations of Pb, Cd, and Zn in biota of receiving streams, compared to biota of similar streams without direct influence of mining. Our results also demonstrate that metal exposure in the study area differed significantly among sample types, habitats, and years, and that these factors should be carefully considered in the design of biomonitoring studies.     

Microbial secondary metabolites in school buildings inspected for moisture damage in Finland, The Netherlands and Spain

Secondary metabolites produced by fungi and bacteria are among the potential agents that contribute to adverse health effects observed in occupants of buildings affected by moisture damage, dampness and associated microbial growth. However, few attempts have been made to assess the occurrence of these compounds in relation to moisture damage and dampness in buildings. This study conducted in the context of the HITEA project (Health Effects of Indoor Pollutants: Integrating microbial, toxicological and epidemiological approaches) aimed at providing systematic information on the prevalence of microbial secondary metabolites in a large number of school buildings in three European countries, considering both buildings with and without moisture damage and/or dampness observations. In order to address the multitude and diversity of secondary metabolites a large number of more than 180 analytes was targeted in settled dust and surface swab samples using liquid chromatography/mass spectrometry (LC/MS) based methodology. While 42%, 58% and 44% of all samples collected in Spanish, Dutch and Finnish schools, respectively, were positive for at least one of the metabolites analyzed, frequency of detection for the individual microbial secondary metabolites - with the exceptions of emodin, certain enniatins and physcion - was low, typically in the range of and below 10% of positive samples. In total, 30 different fungal and bacterial secondary metabolites were found in the samples. Some differences in the metabolite profiles were observed between countries and between index and reference school buildings. A major finding in this study was that settled dust derived from moisture damaged, damp schools contained larger numbers of microbial secondary metabolites at higher levels compared to respective dust samples from schools not affected by moisture damage and dampness. This observation was true for schools in each of the three countries, but became statistically significant only when combining schools from all countries and thus increasing the sample number in the statistical analyses.     

Association of Streptomyces community composition determined by PCR-denaturing gradient gel electrophoresis with indoor mold status

Both Streptomyces species and mold species have previously been isolated from moisture-damaged building materials; however, an association between these two groups of microorganisms in indoor environments is not clear. In this study, we used a culture-independent method, PCR-denaturing gradient gel electrophoresis (PCR-DGGE), to investigate the composition of the Streptomyces community in house dust. Twenty-three dust samples each from two sets of homes categorized as high-mold and low-mold based on mold-specific quantitative PCR analysis were used in the study. Taxonomic identification of prominent bands was performed by cloning and sequencing. Associations between DGGE amplicon band intensities and home mold status were assessed using univariate analyses as well as multivariate recursive partitioning (decision trees) to test the predictive value of combinations of bands intensities. In the final classification tree, a combination of two bands was significantly associated with mold status of the home (p?=?0.001). The sequence corresponding to one of the bands in the final decision tree matched a group of Streptomyces species that included Streptomyces coelicolor and Streptomyces sampsonii, both of which have been isolated from moisture-damaged buildings previously. The closest match for the majority of sequences corresponding to a second band consisted of a group of Streptomyces species that included Streptomyces hygroscopicus, an important producer of antibiotics and immunosuppressors. Taken together, the study showed that DGGE can be a useful tool for identifying bacterial species that may be more prevalent in mold-damaged buildings.     

Results of An Indoor Size Fractionated PM School Sampling Program in Libby, Montana

Libby, Montana is the only PM_2.5 nonattainment area in the western United States with the exceptions of parts of southern California. During January through March 2005, a particulate matter (PM) sampling program was conducted within Libby’s elementary and middle schools to establish baseline indoor PM concentrations before a wood stove change-out program is implemented over the next several years. As part of this program, indoor concentrations of PM mass, organic carbon (OC), and elemental carbon (EC) in five different size fractions (>2.5, 1.0–2.5, 0.5–1.0, 0.25–0.5, and <0.25 μm) were measured. Total measured PM mass concentrations were much higher inside the elementary school, with particle size fraction (>2.5, 0.5–1.0, 0.25–0.5, and <0.25 μm) concentrations between 2 and 5 times higher when compared to the middle school. The 1.0–2.5 μm fraction had the largest difference between the two sites, with elementary school concentrations nearly 10 times higher than the middle school values. The carbon component for the schools’ indoor PM was found to be predominantly composed of OC. Measured total OC and EC concentrations, as well as concentrations within individual size fractions, were an average of two to five times higher at the elementary school when compared to the middle school. For the ultrafine fraction (<0.25), EC concentrations were similar between each of the schools. Despite the differences in concentrations between the schools at the various fraction levels, the OC/EC ratio was determined to be similar.     

Heavy metal distribution and enrichment in sediments of Mejillones Bay (23° S), Chile: a spatial and temporal approach

Concentrations of Ni, Cd, Pb, Cu, and Zn were measured in the surface sediments of Mejillones Bay at 32 sites ranging in depth from 10 to 95 m. A similarity dendrogram analysis separated the study area into two large sedimentary facies: a coastal zone with low metal concentrations and a deep zone with high metal concentrations. The abundances of Zn, Ni, and Pb increased between two sampling periods (5 years apart) in association with greater anthropogenic activity along the coastline of the bay at the present. The results were analyzed with the index of geoaccumulation and by applying the sediment quality guideline. Although similar to preindustrial levels, current Cu and Ni concentrations pose a likely threat to communities of benthic organisms. Concentrations of Zn and Pb are enriched, probably in connection with the industrial development of the zone, but do not reach dangerous levels for the benthic communities. Cd concentrations are toxic to benthic life, even though those measured herein are similar to preindustrial levels. Thus, these Cd levels are a result of the bay's natural characteristics (e.g., high biological productivity, the microxic water-sediment interface). The results of the Chilean aquatic sediment quality standards and the international standard (sediment quality guideline) were similar but differed from those found using the index of geoaccumulation, which suggests that the proposed reference values for Chilean aquatic sediment should be reviewed.     

Age dependence of potentially toxic elements (Sb,Cd, Pb,Ag) in human liver tissue from paediatric subjects

Toxic elements are present at low concentrations in the environment. This work was undertaken to investigate the age dependence of the liver content of selected elements in paediatric populations, as an index of internal exposure. Liver samples were collected at autopsy from 157 subjects, aged < 1 day to 6 years, as part of investigations on a possible role of Sb compounds in sudden infant death syndrome (SIDS). In addition to Sb, the concentrations of Ag, Cd and Pb were also determined by inductively coupled plasma mass spectrometry on the remaining digest. Comparison of 95% confidence intervals of the median concentrations of the four elements suggested that there were no differences between the two categories of cause of death, SIDS or those who had died of an identified disease. Cadmium, lead and antimony median concentrations were lower than corresponding values observed in adult populations. Silver concentrations were significantly higher at birth and decreased with age. Cadmium levels were almost negligible in neonates and infants, but increased in older children. The finding of non-negligible concentrations of both Ag and Pb in neonatal liver provides further direct evidence that these elements cross the human placental barrier. The reported data, by far the largest collection observed in subjects less than 1 year old, are the result of exposure, during pregnancy and in early childhood, to present levels of these elements in the environment. They can serve as a reference to compare post-mortem values from individuals or groups of subjects in this age range when an exposure risk is suspected and to highlight trends in human exposure.     

Natural attenuation of coal combustion waste in river sediments

The weathering of coal combustion products (CCPs) in a lotic environment was assessed following the Tennessee Valley Authority (Kingston, TN) fly ash release of 2008 into surrounding rivers. Sampled materials included stockpiled ash and sediment collected from 180 to 880 days following the release. Total recoverable concentrations of heavy metals and metalloids in sediment were measured, and percent ash was estimated visually or quantified by particle counts. Arsenic and selenium in sediment were positively correlated with percent ash. For samples collected 180 days after the release, total concentrations of trace elements downstream of the release were greater than reference levels but less than concentrations measured in stockpiled ash. Total concentrations of trace elements remained elevated in ash-laden sediment after almost 2.5 years. A sequential extraction procedure (SEP) was used to speciate selected fractions of arsenic, copper, lead, nickel, and selenium in decreasing order of bioavailability. Concentrations of trace elements in sequentially extracted fractions were one to two orders of magnitude lower than total recoverable trace elements. The bulk of sequentially extractable trace elements was associated with iron-manganese oxides, the least bioavailable fraction of those measured. By 780 days, trace element concentrations in the SEP fractions approached reference concentrations in the more bioavailable water soluble, ion exchangeable, and carbonate-bound fractions. For each trace element, the percentage composition of the bioavailable fractions relative to the total concentration was calculated. These SEP indices were summed and shown to significantly decrease over time. These results document the natural attenuation of leachable trace elements in CCPs in river sediment as a result of the loss of bioavailable trace elements over time.     

Measuring strategies and monitoring of the indoor environment

This paper presents key elements on which to base the design of a strategy for a particular indoor environment measurement task. Starting from a general strategy for responding to occupant complaints and conducting epidemiological and intervention studies the paper concentrates on selected key elements, with focus on air contaminants. Strategies for grouping of occupants with the purpose of exposure assessment should aim at optimising exposure contrast between groups, and grouping according to buildings may not be the proper choice. Occupant exposure can be measured by personal sampling or constructed from measured concentrations in microenvironments and activity patterns. The cause of temporal and spatial variability is discussed and guidance is given on the number of samples needed to detect a given change in true concentration level. The sick building syndrome (SBS) is defined as those situations where a high proportion of building occupants are complaining about mucous membrane or skin irritation, general symptoms. When investigating SBS, questionnaires should be used to collect structured information from occupants on perception of environmental conditions, psychosocial factors and symptoms. There is as yet no consensus on choice of length of reference period for reporting symptoms and for estimating exposure. Finally, methods for identifying and quantification of sources of air contaminants are discussed, including lab-scale or full-scale simulation, on-site measurement of source emission, air monitoring, surface sampling, and modelling.     

Seasonal and Inter-Annual Variations in Methyl Mercury Concentrations in Zooplankton from Boreal Lakes Impacted by Deforestation or Natural Forest Fires

We compared the effects of natural and anthropogenic watershed disturbances on methyl mercury (MeHg) concentration in bulk zooplankton from boreal Shield lakes. MeHg in zooplankton was monitored for three years in nine lakes impacted by deforestation, in nine lakes impacted by wildfire, and in twenty lakes with undisturbed catchments. Lakes were sampled during spring, mid- and late summer. MeHg in zooplankton showed a seasonal trend: concentrations were the lowest in spring, then peaked in mid-summer and decreased in late summer. Over the three study years, MeHg concentrations observed in mid-summer in zooplankton from forest harvested lakes were significantly higher than in reference and fire-impacted lakes, whereas differences between these two groups of lakes were not significant. The pattern of distribution of MeHg in zooplankton during the different seasons paralleled that of dissolved organic carbon (DOC), which is known as a vector of Hg from watershed soils to lake water. Besides DOC, MeHg in zooplankton also showed a positive significant correlation with epilimnetic temperature and sulfate concentrations. An inter-annual decreasing trend in MeHg was observed in zooplankton from reference and fire-impacted lakes. In forest harvested lakes, however, MeHg concentrations remained higher and nearly constant over three years following the impact. Overall these results indicate that the MeHg pulse observed in zooplankton following deforestation by harvesting is relatively long-lived, and may have repercussions to the accumulation of MeHg along the food chain. Therefore, potential effects of deforestation on the Hg contamination of fish should be taken into account in forest management practices.     

Indoor/ambient residential air toxics results in rural western Montana

Indoor and ambient concentrations of 21 volatile organic compounds (including 14 hazardous air pollutants) were measured in the homes of nearly 80 western Montana (Missoula) high school students as part of the 'Air Toxics Under the Big Sky' program during the 2004/2005 and 2005/2006 school years. Target analytes were measured using low flow air sampling pumps and sorbent tubes, with analysis of the exposed samples by thermal desorption/gas chromatography/mass spectrometry (TD/GC/MS). The results reported here present the findings of the first indoor/ambient air toxics monitoring program conducted in a semi-rural valley location located in the Northern Rocky Mountain/Western Montana region. Of all of the air toxics quantified in this study, toluene was found to be the most abundant compound in both the indoor and ambient environments during each of the two school years. Indoor log-transformed mean concentrations were found to be higher when compared with ambient log-transformed mean concentrations at P < 0.001 for the majority of the compounds, supporting the results of previous studies conducted in urban areas. For the air toxics consistently measured throughout this program, concentrations were approximately six times higher inside the student's homes compared to those simultaneously measured directly outside their homes. For the majority of the compounds, there were no significant correlations between indoor and ambient concentrations.     

Influence of aerosol spectrum and air pollutants on fog formation in urban environment of megacity Delhi, India

Urban areas are facing increasing fog frequencies that may result due to increased air pollution emanating from variety of sources. The increased pollution levels may lead to the atmospheric reactions resulting into the formation of secondary pollutants that may also lead to increased aerosol number concentrations (ANC) in the atmosphere. This could cause enhanced water aerosols in the presence of favourable meteorological conditions and high relative humidity. This study deals with the atmospheric pollution and visibility during winter season of megacity Delhi in order to assess the relationship between the two specifically during fog episodes. Thus, this study analyses the levels of air pollutants, aerosol spectrum and meteorological conditions during one week each in the winter season of the years 2004 and 2006 in order to have an improved understanding of their role in fog formation in mega-city Delhi. More than 300 h of measurements which included episodes of dense, thick and moderate fogs of about 25 h, were studied. The measurements cover most of the accumulation mode and greater size spectrum of aerosols. Thus, the analysis is performed for the entire period, specifically, before the fog sets up, during and afterwards. In general, the relatively small variations in number concentration show larger variations in visibility prior and post dense fog formation than during dense fog episodes. Preliminary analysis of monthly averaged RSPM (Respirable Suspended particulate Matter or PM(10)) concentration values for four winter months for a period of 6 years (1996-2001) and visibility did not show a good correlation with total occurrences of fog. However, daily averaged RSPM concentration showed a good correlation with the occurrences of thick fog. Diurnal variation of Sulfur-dioxide and Nitrogen dioxide were found to have inverse relationship with visibility during fog which may be due to formation of secondary pollutants such as sulfate and to a lesser extent nitrates. Amongst, the daily averaged concentrations of all the criteria pollutants, RSPM was found to be best correlated with the fog in comparison to other pollutants.     

饮用水源微生物快速检测技术的发展及应用

微生物是威胁饮用水安全的首要问题，水环境微生物快速检测技术的开发和应用是推动饮用水源微生物快速检测和水质安全预警技术发展的保障。随着对水质微生物污染快速检测和准确预警新要求的提出，水环境中微生物在线检测和预警技术得到了越来越多的开发和应用。笔者总结了水环境常见微生物检测方法和技术的发展，重点讨论了饮用水源微生物快速检测技术的发展和应用，根据各项技术的应用和推广使用程度，将其归纳为常用快速检测技术、潜在适用快速检测技术和新型快速检测技术等类别，并详细阐述了一些应用较广的技术，以期为构建水质微生物污染早期预警系统提供参考。     

乌鲁木齐市冬季重污染天气下PM_(2.5)中重金属污染特征及来源解析

通过乌鲁木齐市2013年2月5日至26日一次重污染天气过程中,在6个采样点位进行细颗粒物PM_(2.5)的采集,并对其中的13种重金属(Cu、Sr、Mo、Cd、Pb、V、Cr、Mn、Fe、Co、Ni、As、Hg)含量、Mull污染指数、空间分布以及溯源进行了分析。结果显示:采样期间乌鲁木齐市重金属浓度在0.23~178 ng/m~3之间,浓度水平排序PbMnCrFeAsVCuNiSrCdMoCoHg,其中Cd、Hg、Pb、Cr、As浓度均高于乌鲁木齐市背景值和国内外其他城市水平,且Mull污染指数处于较严重的污染水平;在重金属元素浓度的空间分布上,铁招和南公园点位重金属浓度较高,31中学和市监测站相对较低。     

Personal exposures and microenvironmental concentrations of particles and bioaerosols

The aim of this study was to compare the personal exposure to particles and bioaerosols with that measured by stationary samplers in the main microenvironments, i.e., the home and the workplace. A random sample of 81 elementary school teachers was selected from the 823 teachers working for two councils in eastern Finland for the winter time measurement period. Bioaerosol and other particles were collected on filters by button samplers using personal sampling and microenvironmental measurements in homes and workplaces. The 24-hour sampling period was repeated twice for each teacher. Particle mass, absorption coefficient of the filter and the concentration of viable and total microorganisms were analyzed from each filter. In this paper, the study design, quality assurance principles and results of particle and bioaerosol exposure are described. The results show that particle mass concentrations, absorption coefficient and fungi were higher in personal exposure samples than in home and workplace samples. Furthermore, these concentrations were usually lower in the home than in the workplace. Bacterial concentrations were highest in heavily populated workplaces, while the viable fungi concentrations were lowest in workplaces. The fungi and bacteria results showed high variation, which emphasises the importance of quality assurance (duplicates and field blanks) in the microbial field measurements. Our results indicate that personal exposure measurements of bioaerosols in indoor environments are feasible and supplement the information obtained by stationary samplers.     

Relationships between watershed emergy flow and coastal New England salt marsh structure, function, and condition

This study evaluated the link between watershed activities and salt marsh structure, function, and condition using spatial emergy flow density (areal empower density) in the watershed and field data from 10 tidal salt marshes in Narragansett Bay, RI, USA. The field-collected data were obtained during several years of vegetation, invertebrate, soil, and water quality sampling. The use of emergy as an accounting mechanism allowed disparate factors (e.g., the amount of building construction and the consumption of electricity) to be combined into a single landscape index while retaining a uniform quantitative definition of the intensity of landscape development. It expanded upon typical land use percentage studies by weighting each category for the intensity of development. At the RI salt marsh sites, an impact index (watershed emergy flow normalized for marsh area) showed significant correlations with mudflat infauna species richness, mussel density, plant species richness, the extent and density of dominant plant species, and denitrification potential within the high salt marsh. Over the 4-year period examined, a loading index (watershed emergy flow normalized for watershed area) showed significant correlations with nitrite and nitrate concentrations, as well as with the nitrogen to phosphorus ratios in stream discharge into the marshes. Both the emergy impact and loading indices were significantly correlated with a salt marsh condition index derived from intensive field-based assessments. Comparison of the emergy indices to calculated nitrogen loading estimates for each watershed also produced significant positive correlations. These results suggest that watershed emergy flow is a robust index of human disturbance and a potential tool for rapid assessment of coastal wetland condition.     

Organophosphate and phthalate esters in indoor air: a comparison between multi-storey buildings with high and low prevalence of sick building symptoms

An extensive study has been conducted on the prevalence of organophosphorous flame retardants/plasticizers and phthalate ester plasticizers in indoor air. The targeted substances were measured in 45 multi-storey apartment buildings in Stockholm, Sweden. The apartment buildings were classified as high or low risk with regard to the reporting of sick building symptoms (SBS) within the project Healthy Sustainable Houses in Stockholm (3H). Air samples were taken from two to four apartments per building (in total 169 apartments) to facilitate comparison within and between buildings. Association with building characteristics has been examined as well as association with specific sources by combining chemical analysis and exploratory uni- and multivariate data analysis. The study contributes to the overall perspective of levels of organophosphate and phthalate ester in indoor air enabling comparison with other studies. The results indicated little or no difference in the concentrations of the target substances between the two risk classifications of the buildings. The differences between the apartments sampled within (intra) buildings were greater than the differences between (inter) buildings. The concentrations measured in air ranged up to 1200 ng m(-3) for organophosphate esters and up to 11?000 ng m(-3) for phthalate esters. Results in terms of sources were discerned e.g. PVC flooring is a major source of benzylbutyl phthalate in indoor air.     

济南市空气质量状况与气象条件关系分析

利用济南市空气污染指数资料和气象资料,分析空气质量状况与气象条件的关系规律,建立起空气污染指数与气象要素间的季节性回归方程,并筛选济南市近年来的空气质量重污染过程,分析污染过程时对应的天气形势特征,为济南市的空气污染指数预报和环境保护工作中的污染潜势预报提供参考。