Modeling net primary production of a fast-growing forest using a light use efficiency model

As interest grows in the quantification of global carbon cycles, Light Use Efficiency (LUE) model predictions of the forest net primary production (NPP) are being developed at an accelerating rate. Such models can provide useful predictions at large scales, but evaluating their performance has been difficult. In this study, a remote sensing-based LUE model was established to estimate forest NPP. Using the forest inventory data (FID) from the regional forest inventory survey in China and established allometric biomass equations, we calculated the biomass, the biomass increment, and the NPP of Eucalyptus urophylla (E. urophylla) plantation plots in the forestry jurisdiction of the Leizhou Forestry Bureau, Southern China. The FID-based NPP and the NPP from LUE model predictions were then compared to each other. Results show that the NPP from model predictions at a spatial resolution of 30 m × 30 m varied from 0 to 265 gC/(m² month) and showed regional differences. In addition, the stand age had variable effects on the average individual biomass of the E. urophylla plantation plots. The average individual biomass of the young and mid-age forests increased exponentially and logarithmically with the stand age (R² = 0.9178 and R² = 0.8683), respectively. For young and mid-age E. urophylla plantation plots, the LUE model-predicted NPP was fairly consistent with the FID-based NPP, but the model predictions of the NPP were higher than the estimates from FID. Through the analysis of the causes of uncertainty and the possible reasons for the discrepancy between the model-based NPP and FID-based NPP, the FID-derived estimates provided a foundation for model evaluation.     

Modelling forest management within a global vegetation model—Part 1: Model structure and general behaviour

This article describes a new forest management module (FMM) that explicitly simulates forest stand growth and management within a process-based global vegetation model (GVM) called ORCHIDEE. The net primary productivity simulated by ORCHIDEE is used as an input to the FMM. The FMM then calculates stand and management characteristics such as stand density, tree size distribution, tree growth, the timing and intensity of thinnings and clear-cuts, wood extraction and litter generated after thinning. Some of these variables are then fed back to ORCHIDEE. These computations are made possible with a distribution-based modelling of individual tree size. The model derives natural mortality from the relative density index (rdi), a competition index based on tree size and stand density. Based on the common forestry management principle of avoiding natural mortality, a set of rules is defined to calculate the recurrent intensity and frequency of forestry operations during the stand lifetime. The new-coupled model is called ORCHIDEE-FM (forest management).The general behaviour of ORCHIDEE-FM is analysed for a broadleaf forest in north-eastern France. Flux simulation throughout a forest rotation compare well with the literature values, both in absolute values and dynamics.Results from ORCHIDEE-FM highlight the impact of forest management on ecosystem C-cycling, both in terms of carbon fluxes and stocks. In particular, the average net ecosystem productivity (NEP) of 225 gC m⁻² year⁻¹ is close to the biome average of 311 gC m⁻² year⁻¹. The NEP of the “unmanaged” case is 40% lower, leading us to conclude that management explains 40% of the cumulated carbon sink over 150 years. A sensitivity analysis reveals 4 major avenues for improvement: a better determination of initial conditions, an improved allocation scheme to explain age-related decline in productivity, and an increased specificity of both the self-thinning curve and the biomass-diameter allometry.     

Spatially distributed modeling of the long-term carbon balance of a boreal landscape

Spatially and temporally distributed information on the sizes of biomass carbon (C) pools (BCPs) and soil C pools (SCPs) is vital for improving our understanding of biosphere-atmosphere C fluxes. Because the sizes of C pools result from the integrated effects of primary production, age-effects, changes in climate, atmospheric CO₂ concentration, N deposition, and disturbances, a modeling scheme that interactively considers these processes is important. We used the InTEC model, driven by various spatio-temporal datasets to simulate the long-term C-balance in a boreal landscape in eastern Canada. Our results suggested that in this boreal landscape, mature coniferous stands had stabilized their productivity and fluctuated as a weak C-sink or C-source depending on the interannual variations in hydrometeorological factors. Disturbed deciduous stands were larger C-sinks (NEP₂₀₀₄ = 150 gC m⁻² yr⁻¹) than undisturbed coniferous stands (e.g. NEP₂₀₀₄ = 8 gC m⁻² yr⁻¹). Wetlands had lower NPP but showed temporally consistent C accumulation patterns. The simulated spatio-temporal patterns of BCPs and SCPs were unique and reflected the integrated effects of climate, plant growth and atmospheric chemistry besides the inherent properties of the C pool themselves. The simulated BCPs and SCPs generally compared well with the biometric estimates (BCPs: r = 0.86, SCPs: r = 0.84). The largest BCP biases were found in recently disturbed stands and the largest SCP biases were seen in locations where moss necro-masses were abundant. Reconstructing C pools and C fluxes in the ecosystem in such a spatio-temporal manner could help reduce the uncertainties in our understanding of terrestrial C-cycle.     

Inter-annual variability of ecosystem production in boreal jack pine forests (1975-2004) estimated from tree-ring data using CBM-CFS3

We describe and apply a method of using tree-ring data and an ecosystem model to reconstruct past annual rates of ecosystem production. Annual data on merchantable wood volume increment and mortality obtained by dendrochronological stand reconstruction were used as input to the Carbon Budget Model of the Canadian Forest Sector (CBM-CFS3) to estimate net ecosystem production (NEP), net primary production (NPP), and heterotrophic respiration (Rh) annually from 1975 to 2004 at 10 boreal jack pine (Pinus banksiana Lamb.) stands in Saskatchewan and Manitoba, Canada. From 1975 (when sites aged 41-60 years) to 2004 (when they aged 70-89 years), all sites were moderate C sinks except during some warmer than average years where estimated Rh increased. Across all sites and years, estimated annual NEP averaged 57 g Cm⁻² yr⁻¹ (range −31 to 176 g Cm⁻² yr⁻¹), NPP 244 g Cm⁻² yr⁻¹ (147-376 g Cm⁻² yr⁻¹), and Rh 187 g Cm⁻² yr⁻¹ (124-270 g Cm⁻² yr⁻¹). Across all sites, NPP was related to stand age and density, which are proxies for successional changes in leaf area. Regionally, warm spring temperature increased NPP and defoliation by jack pine budworm 1 year previously reduced NPP. Our estimates of NPP, Rh, and NEP were plausible when compared to regional eddy covariance and carbon stock measurements. Inter-annual variability in ecosystem productivity contributes uncertainty to inventory-based assessments of regional forest C budgets that use yield curves predicting averaged growth over time. Our method could expand the spatial and temporal coverage of annual forest productivity estimates, providing additional data for the development of empirical models accounting for factors not presently considered by these models.     

Using a fire propagation model to assess the efficiency of prescribed burning in reducing the fire hazard

We examined how fire hazard was affected by prescribed burning and fuel recovery over the first six years following treatment. Eight common Mediterranean fuel complexes managed by means of prescribed burning in limestone Provence (South-Eastern France) were studied, illustrating forest and woodland, garrigue and grassland situations. The coupled atmosphere-wildfire behaviour model FIRETEC was used to simulate fire behaviour (ROS, intensity) in these complex vegetations. The temporal threshold related to the effectiveness of prescribed burning in reducing the fire hazard was assessed from derivated fuel dynamics after treatment. The study showed that prescribed burning treatment was effective for the first two years in most of the Mediterranean plant communities analysed. Thereafter, all forests and shrublands were highly combustible with a fire line intensity of more than 5000 kW/m except for pine stands with or without oak (medium intensity of 2000 kW m⁻¹ 3 years after treatment). Low fire line intensity (900 kW m⁻¹) was obtained for grassland which was entirely treatment-independent since the resprouter hemicryptophyte, Brachypodium retusum, is highly resilient to fire. Fire behaviour was greatly affected by fuel load accumulation of Quercus ilex in woodland, and by standing necromass of Rosmarinus officinalis in treated garrigue. Pure pine stands with shrub strata similar to garrigue showed a lower fire intensity due to wind speed decrease at ground level under tree canopy, underlining the advantage of maintaining a proportion of canopy cover in strategic fuel-break zones.     

Foliage profiles of individual trees determine competition,self-thinning,biomass and NPP of a Cryptomeria japonica forest stand: A simulation study based on a stand-scale process-based forest model

A simulation study was carried out to investigate simultaneously the effects of eco-physiological parameters on competitive asymmetry, self-thinning, stand biomass and NPP in a temperate forest using an atmosphere–vegetation dynamics interactive model (MINoSGI). In this study, we selected three eco-physiological relevant parameters as foliage profiles (i.e. vertical distribution of leaf area density) of individual trees (distribution pattern is described by the parameter η), biomass allocation pattern in individual tree growth (χ) and the maximum carboxylation velocity (V_max). The position of the maximal leaf area density shifts upward in the canopy with increasing η. For scenarios with η < 4 (foliage concentrated in the lowest canopy layer) or η > 12 (foliage concentrated in the uppermost canopy layer), a low degree of competitive asymmetry was produced. These scenarios resulted in the survival of subordinate trees due to a brighter lower canopy environment when η < 4 or the generation of spatially separated foliage profiles between dominant and subordinate trees when η > 12. In contrast, competition between trees was most asymmetric when 4 ≤ η ≤ 12 (vertically widespread foliage profile in the canopy), especially when η = 8. In such cases, vertically widespread foliage of dominant trees lowered the opportunity of light acquisition for subordinate trees and reduced their carbon gain. The resulting reduction in carbon gain of subordinate trees yielded a higher degree of competitive asymmetry and ultimately higher mortality of subordinate trees. It was also shown that 4 ≤ η ≤ 12 generated higher self-thinning speed, smaller accumulated NPP, litter-fall and potential stand biomass as compared with the scenarios with η < 4 or η > 12. In contrast, our simulation revealed small effects of χ or V_max on the above-mentioned variables as compared with those of η. In particular, it is notable that greater V_max would not produce greater potential stand biomass and accumulated NPP although it has been thought that physiological parameters relevant to photosynthesis such as V_max influence dynamic changes in forest stand biomass and NPP (e.g. the greater the V_max, the greater the NPP). Overall, it is suggested that foliage profiles rather than biomass allocation or maximum carboxylation velocity greatly govern forest dynamics, stand biomass, NPP and litter-fall.     

Evaluating weather effects on interannual variation in net ecosystem productivity of a coastal temperate forest landscape: A model intercomparison

Forest productivity is strongly affected by seasonal weather patterns and by natural or anthropogenic disturbances. However weather effects on forest productivity are not currently represented in inventory-based models such as CBM-CFS3 used in national forest C accounting programs. To evaluate different approaches to modelling these effects, a model intercomparison was conducted among CBM-CFS3 and four process models (ecosys, CN-CLASS, Can-IBIS and 3PG) over a 2500 ha landscape in the Oyster River (OR) area of British Columbia, Canada. The process models used local weather data to simulate net primary productivity (NPP), net ecosystem productivity (NEP) and net biome productivity (NBP) from 1920 to 2005. Other inputs used by the process and inventory models were generated from soil, land cover and disturbance records. During a period of intense disturbance from 1928 to 1943, simulated NBP diverged considerably among the models. This divergence was attributed to differences among models in the sizes of detrital and humus C stocks in different soil layers to which a uniform set of soil C transformation coefficients was applied during disturbances. After the disturbance period, divergence in modelled NBP among models was much smaller, and attributed mainly to differences in simulated NPP caused by different approaches to modelling weather effects on productivity. In spite of these differences, age-detrended variation in annual NPP and NEP of closed canopy forest stands was negatively correlated with mean daily maximum air temperature during July-September (T_amax) in all process models (R² = 0.4-0.6), indicating that these correlations were robust. The negative correlation between T_amax and NEP was attributed to different processes in different models, which were tested by comparing CO₂ fluxes from these models with those measured by eddy covariance (EC) under contrasting air temperatures (T_a). The general agreement in sensitivity of annual NPP to T_amax among the process models led to the development of a generalized algorithm for weather effects on NPP of coastal temperate coniferous forests for use in inventory-based models such as CBM-CFS3: NPP′ = NPP − 57.1 (T_amax − 18.6), where NPP and NPP′ are the current and temperature-adjusted annual NPP estimates from the inventory-based model, 18.6 is the long-term mean daily maximum air temperature during July-September, and T_amax is the mean value for the current year. Our analysis indicated that the sensitivity of NPP to T_amax was nonlinear, so that this algorithm should not be extrapolated beyond the conditions of this study. However the process-based methodology to estimate weather effects on NPP and NEP developed in this study is widely applicable to other forest types and may be adopted for other inventory based forest carbon cycle models.     

Dissolved organic carbon concentrations and fluxes in forest catchments and streams: DOC-3 model

Dissolved organic carbon (DOC) concentrations in south-western Nova Scotia streams, sampled at weekly to biweekly intervals, varied across streams from about 3 to 40 mg L⁻¹, being highest mid-summer to fall, and lowest during winter to spring. A 3-parameter model (DOC-3) was proposed to project daily stream DOC concentrations and fluxes from modelled estimates for daily soil temperature and moisture, year-round, and in relation to basin size and wetness. The parameters of this model refer to (i) a basin-specific DOC release parameter “k_DOC^”, related to the wet- and open-water area percentages per basin, (ii) the lag time “τ” between DOC production and subsequent stream DOC emergence, related to the catchment area above the stream sampling location; and (iii) the activation energy “Ea”, to deal with the temperature effect on DOC production. This model was calibrated with the 1988-2006 DOC concentration data from three streams (Pine Marten, Moosepit Brook, and the Mersey River sampled at or near Kejimkujik National Park, or KNP), and was used to interpret the biweekly 1999-2003 DOC concentrations data (stream, ground and lake water, soil lysimeters) of the Pockwock-Bowater Watershed Project near Halifax, Nova Scotia. The data and the model revealed that the DOC concentrations within the streams were not correlated to the DOC concentrations within the soil- and groundwater, but were predictable based on (i) the hydrologically inferred weather-induced changes in soil moisture and temperature next to each stream, and (ii) the topographically inferred basin area and wet- and open-water area percentages associated with each stream (R² = 0.53; RMSE = 3.5 mg L⁻¹). Model-predicted fluxes accounted 74% of the hydrometrically determined DOC exports at KNP.     

Estimation of annual potential evapotranspiration at regional scale based on the effect of moisture on soil respiration

Potential evapotranspiration (PET) is an important component of water cycle. For traditional models derived from the principle of aerodynamics and the surface energy balance, its calculation always includes many parameters, such as net radiation, water vapor pressure, air temperature and wind speed. We found that it can be acquired in an easier way in specific regions. In this study, a new PET model (PETP model) derived from two empirical models of soil respiration was evaluated using the Penman-Monteith equation as a standard method. The results indicate that the PETP model estimation concur with the Penman-Monteith equation in sites where annual precipitation ranges from 717.71 mm to 1727.37 mm (R² = 0.68, p = 0.0002), but show large discrepancies in all sites (R² = 0.07, p = 0.1280). Then we applied our PETP model at the global scale to the regions with precipitation higher than 700 mm using 2.5° CMAP data to obtain the annual PET for 2006. As expected, the spatial pattern is satisfactory overall, with the highest PET values distributed in the lower latitudes or coastal regions, and with an average of 1292.60 ± 540.15 mm year⁻¹. This PETP model provides a convenient approach to estimate PET at regional scales.     

Litter decomposition and nitrogen mineralization from an annual to a monthly model

The forest litter decomposition model (FLDM) described in this paper provides an important basis for assessing the impacts of forest management on seasonal stream water quality and export of dissolved organic carbon (DOC). By definition, models with annual time steps are unable to capture seasonal, within-year variation. In order to simulate seasonal variation in litter decomposition and DOC production and export, we have modified an existing annual FLDM to account for monthly dynamics of decomposition and residual mass in experimental litterbags placed in 21 different forests across Canada.The original annual FLDM was formulated with three main litter pools (fast, slow, and very slow decomposing litter) to address the fact that forest litter is naturally composed of a mixture of organic compounds that decompose at different rates. The annual FLDM was shown to provide better simulations than more complex models like CENTURY and SOMM.The revised monthly model retains the original structure of the annual FLDM, but separates litter decomposition from nitrogen (N) mineralization. In the model, monthly soil temperature, soil moisture, and mean January soil temperature are shown to be the most important controlling variables of within-year variation in decomposition. Use of the three variables in a process-based definition of litter decomposition is a significant departure from the empirical definition in the annual model. The revised model is shown to give similar calculations of residual mass and N concentration as the annual model (r² = 0.91, 0.78), despite producing very different timeseries of decomposition over six years. It is shown from a modelling perspective that (i) forest litter decomposition is independent of N mineralization, whereas N mineralization is dependent on litter decomposition, and (ii) mean January soil temperature defines litter decomposition in the summer because of winter-temperatures’ role in modifying forest-floor microorganism community composition and functioning in the following summer.     

A geospatial model of forest dynamics with controlled trend surface

This paper proposes a method of controlled trend surface to simultaneously account for large-scale spatial trends and non-spatial local effects. With this method, a geospatial model of forest dynamics was developed for the Alaska boreal forest from 446 constantly monitored permanent sample plots. The geospatial component of this model represented large-scale spatial trends in recruitment, diameter growth, and mortality. The model was tested on two sets of validation plots which represented temporal and spatial extensions of the current sample coverage. The results suggest that the controlled trend surface model was generally more accurate than both the non-spatial and conventional trend surface models. With this model, we mapped the forest dynamics of the entire Alaska boreal region by aggregating predicted stand states across the region. It was predicted that under current conditions of climate and natural disturbances, most of the Alaska boreal forest region may undergo a major shift from deciduous-dominant to conifer-dominant, with an average increase of 0.33 m² ha year⁻¹ in basal area over the Twenty-First Century.     

Local calibration of coliforms parameters of water quality problem at Igapó I Lake, Londrina, Paraná, Brazil

This article presents results concerning the local calibration of the transport parameters (longitudinal and transversal diffusions and decay coefficient) for a two-dimensional problem of water quality at Igapó I Lake, located in Londrina, Paraná, Brazil, using fecal coliforms as an indicator of water quality. The simulation of fecal coliforms concentrations all over the water body is conducted by means of a structured discretization of the geometry of Igapó I Lake, together with the finite difference and finite element methods. By using the velocity field, modeled by the Navier-Stokes and Poisson equations, the flow of fecal coliforms is described by means of a transport model, which considers advective and diffusive processes, as well as a process of fecal coliforms decay. In the checkpoint, the longitudinal and transversal diffusion coefficients and the coliforms decay coefficient that best fitted the value of the fecal coliforms concentration were D_x = D_y = 0.001 m²/h and k = 0.5 d⁻¹ = 0.02083 h⁻¹. A qualitative and quantitative analysis of the numerical simulations conducted in function of the diffusion coefficients and of the coliforms decay parameter provided a better understanding of the local water quality at Igapó I Lake.     

Assessing spawning ground hydraulic suitability for Chinese sturgeon (Acipenser sinensis) from horizontal mean vorticity in Yangtze River

The Chinese sturgeon, Acipenser sinensis, is an anadromous protected species. Its migration pattern has been blocked since the construction of Gezhouba dam and the length of the natural spawning site reduced to less than 7 km. However, the fish eventually established an alternative spawning ground in the narrow downstream reach of Gezhouba dam. In this article, we applied Delft3D-Flow model to simulate the hydraulic suitability of the spawning ground downstream Gezhouba dam. Horizontal mean vorticity was used to assess the hydraulic environment of spawning ground. The flow field state was determined through model simulation and field-measured data used to validate the model. The computational method was improved by calculating absolute horizontal mean vorticity from estimates the literature. The final vorticity was determined from the simulation output and its distribution pattern retrieved. The horizontal mean vorticity range was 0.71–4.61 10⁻³ s⁻¹ for the entire spawning grounds, with egg mass field upper limit of 1.0 × 10⁻³ s⁻¹. Vorticity strength selection of Chinese sturgeon spawning can enhance our understanding of egg fertilization rate, hence the protection of fertilized eggs. Furthermore, the results of the study would add to existing scientific database for spawning ground hydraulic environment protection, especially in the ecological regulation drive of the Three Gorges Reservoir.     

Application of a three-dimensional model for assessing effects of small clear-cuttings on radiation and soil temperature

A three-dimensional model Mixfor-3D of soil–vegetation–atmosphere transfer (SVAT) was developed and applied to estimate possible effects of tree clear-cutting on radiation and soil temperature regimes of a forest ecosystem. The Mixfor-3D model consists of several closely coupled 3D sub-models describing: forest stand structure; radiative transfer in a forest canopy; turbulent transfer of sensible heat, H₂O and CO₂ between ground surface and the atmospheric surface layer; evapotranspiration of ground surface vegetation and soil; heat and moisture transfer in soil. The model operates with the horizontal grid resolution, 2 m × 2 m; vertical resolution, 1 m and primary time step, 1 h.     

Response of tree growth to a changing climate in boreal central Canada: A comparison of empirical,process-based,and hybrid modelling approaches

The impact of 2 × CO₂ driven climate change on radial growth of boreal tree species Pinus banksiana Lamb., Populus tremuloides Michx. and Picea mariana (Mill.) BSP growing in the Duck Mountain Provincial Forest of Manitoba (DMPF), Canada, is simulated using empirical and process-based model approaches. First, empirical relationships between growth and climate are developed. Stepwise multiple-regression models are conducted between tree-ring growth increments (TRGI) and monthly drought, precipitation and temperature series. Predictive skills are tested using a calibration–verification scheme. The established relationships are then transferred to climates driven by 1× and 2 × CO₂ scenarios using outputs from the Canadian second-generation coupled global climate model. Second, empirical results are contrasted with process-based projections of net primary productivity allocated to stem development (NPP_s). At the finest scale, a leaf-level model of photosynthesis is used to simulate canopy properties per species and their interaction with the variability in radiation, temperature and vapour pressure deficit. Then, a top-down plot-level model of forest productivity is used to simulate landscape-level productivity by capturing the between-stand variability in forest cover. Results show that the predicted TRGI from the empirical models account for up to 56.3% of the variance in the observed TRGI over the period 1912–1999. Under a 2 × CO₂ scenario, the predicted impact of climate change is a radial growth decline for all three species under study. However, projections obtained from the process-based model suggest that an increasing growing season length in a changing climate could counteract and potentially overwhelm the negative influence of increased drought stress. The divergence between TRGI and NPP_s simulations likely resulted, among others, from assumptions about soil water holding capacity and from calibration of variables affecting gross primary productivity. An attempt was therefore made to bridge the gap between the two modelling approaches by using physiological variables as TRGI predictors. Results obtained in this manner are similar to those obtained using climate variables, and suggest that the positive effect of increasing growing season length would be counteracted by increasing summer temperatures. Notwithstanding uncertainties in these simulations (CO₂ fertilization effect, feedback from disturbance regimes, phenology of species, and uncertainties in future CO₂ emissions), a decrease in forest productivity with climate change should be considered as a plausible scenario in sustainable forest management planning of the DMPF.     

GIS-based modeling of the geographic distribution of Quercus emoryi Torr. (Fagaceae) in México and identification of significant environmental factors influencing the species’ distribution

The greatest concentration of oak species in the world is believed to be found in Mexico. These species are potentially useful for reforestation because of their capacity to adapt to diverse environments. Knowledge of their geographic distribution and of species–environment relations is essential for decision-making in the management and conservation of natural resources. The objectives of this study were to develop a model of the distribution of Quercus emoryi Torr. in Mexico, using geographic information systems and data layers of climatic and other variables, and to determine the variables that significantly influence the distribution of the species. The study consisted of the following steps: (A) selection of the target species from a botanical scientific collection, (B) characterization of the collecting sites using images with values or categories of the variables, (C) model building with the overlay of images that meet the habitat conditions determined from the characterization of sites, (D) model validation with independent data in order to determine the precision of the model, (E) model calibration through adjustment of the intervals of some variables, and (F) sensitivity analysis using precision and concordance non-parametric statistics applied to pairs of images. Results show that the intervals of the variables that best describe the species’ habitat are the following: altitude from 1650 to 2750 amsl, slope from 0 to 66°; average minimum temperature of January from −12 to −3 °C; mean temperature of June from 11 to 25 °C; mean annual precipitation from 218 to 1225 mm; soil units: lithosol, eutric cambisol, haplic phaeozem, chromic luvisol, rendzina, luvic xerosol, mollic planosol, pellic vertisol, eutric regosol; type of vegetation: oak forest, oak–pine forest, pine forest, pine–oak forest, juniperus forest, low open forest, natural grassland and chaparral. The resulting model of the geographic distribution of Quercus emoryi in Mexico had the following values for non-parametric statistics of precision and agreement: Kappa index of 0.613 and 0.788, overall accuracy of 0.806 and 0.894, sensitivity of 0.650 and 0.825, specificity of 0.963, positive predictive value of 0.945 and 0.957 and negative predictive value of 0.733 and 0.846. Results indicate that the variable average minimum temperature of January, with a maximum value of −3 °C, is an important factor in limiting the species’ distribution.     

The sensitivity of carbon sequestration to harvesting and climate conditions in a temperate cypress forest: Observations and modeling

The role of disturbance and climate factors in determining the forest carbon balance was investigated at a Japanese cypress forest in central Japan with eddy flux measurements, tree-ring analyses, and a terrestrial biosphere model. The forest was established as a plantation after intermittent harvesting and replanting between 1959 and 1977, and acted as a strong carbon sink of approximately 500 g C m⁻² year⁻¹ for the measurement years between 2001 and 2007. A terrestrial biosphere model, BIOME-BGC, was validated using the eddy flux data at daily to interannual timescales, and the tree-ring width data at interannual to decadal timescales. According to the model simulation, during the observation period 270 ± 55 g C m⁻² year⁻¹ was additionally sequestered due to the indirect effects of the harvesting and planting, whereas the increase of CO₂ concentration and the change in climate increased the sink of 110 ± 40 and 30 ± 80 g C m⁻² year⁻¹, respectively. The model simulation shows that the forest is now recovering from harvesting, and that harvesting is a more important determinant of the current carbon sink than either interannual climate anomalies or increased atmospheric CO₂ concentration. We found that harvesting with long rotation length could be effective management activity in order to increase carbon sequestration, if the harvested timber is converted into products with long lifecycles.     

Simulation of thermodynamic transmission in green roof ecosystem

Green roofs entail the creation of vegetated space on the top of artificial structures. They can modify the thermal properties of buildings to bring cooling energy conservation and improve human comfort. This study evaluates the thermodynamic transmission in the green roof ecosystem under different vegetation treatments. Our model simulation is based on the traditional Bowen ratio energy balance model (BREBM) and a proposed solar radiation shield effectiveness model (SEM). The BREBM investigates energy absorption of different components of radiation, and the SEM evaluates the radiation shield effects. The proposed model is tested and validated to be efficient to simulate solar energy transmission in green roofs, with some major findings. Firstly, the solar radiation transmission processes might be considered as free vibration motion. Daytime positive heat storage of the green roof is 350-520 W·m⁻² on an hourly basis. Nighttime or afternoon negative value registers a rather constant magnitude of −60 W·m⁻². Daily net average is positive around 155-210 W·m⁻². Secondly, solar radiation vibration is highly correlated with plant structure. The canopy reflectance and transmittance are strongly correlated (R² = 0.87). The multi-layer shrub treatment has the highest shield effectiveness (0.34), followed by two-layer groundcover (0.27), and single-layer grass (0.16). Green roof vegetation absorbs and stores large amounts of heat to form an effective thermal buffer against daily temperature fluctuation. Vegetated roofs drastically depress air temperature in comparison with bare ground (control treatment). Finally, the thermodynamic model is relatively simple and efficient for investigating thermodynamic transmission in green roof ecosystem, and it could be developed into a broad solar radiant land cover model.