首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献,搜索用时 140 毫秒
1.
A solute transport model that describes nonequilibrium adsorption in soil/groundwater systems by mass transfer equations for film and intraparticle diffusion is presented. The model is useful in cases where breakthrough curve spreading cannot be explained by dispersion only. To evaluate its validity, the model was applied to several data sets from column experiments. The validity was also proved by a comparison with an analytical solution for the limiting case of predominating dispersion. Furthermore, a sensitivity analysis was performed to illustrate the influence of different process and sorption parameters (pore water velocity, intraparticle mass transfer coefficient, isotherm nonlinearity) on the shape of the calculated breakthrough curves. The application of the proposed model is discussed in comparison to the widely used dispersed flow/local equilibrium model, and a relationship between both models, which is based on a lumped parameter approach, is shown.  相似文献   

2.
Several previously reported laboratory studies related to transport of solutes through packed columns were utilized to develop predictive relationships for mass-transfer rate coefficient. The data were classified into two groups: those obtained under rate-limited mass transfer between mobile and immobile water regions (physical nonequilibrium conditions), and those derived from rate-limited mass transfer between instantaneous and slow sorption sites (sorption nonequilibrium conditions). The mass-transfer coefficient in all these studies was obtained by fitting breakthrough data to a transport model employing a first-order rate limitations with a "constant" mass-transfer coefficient, independent of flow conditions. This study demonstrated that the mass-transfer coefficient in these models is dependent on system parameters including pore-water velocity, length-scale, retardation coefficient, and particle or aggregate size. Predictive relationships were developed, through regression analysis, relating mass-transfer coefficient to residence time. The developed relationships adequately estimated previously reported field mass-transfer values. Successful simulations of field desorption data reported by Bahr [J. Contam. Hydrol. 4 (1989) 205] further demonstrate the potential applicability of the developed relationships.  相似文献   

3.
Quantification of the relationship between dense nonaqueous phase liquid (DNAPL) source strength, source longevity and spatial distribution is increasingly recognized as important for effective remedial design. Partitioning tracers are one tool that may permit interrogation of DNAPL architecture. Tracer data are commonly analyzed under the assumption of linear, equilibrium partitioning, although the appropriateness of these assumptions has not been fully explored. Here we focus on elucidating the nonlinear and nonequilibrium partitioning behavior of three selected alcohol tracers - 1-pentanol, 1-hexanol and 2-octanol in a series of batch and column experiments. Liquid-liquid equilibria for systems comprising water, TCE and the selected alcohol illustrate the nonlinear distribution of alcohol between the aqueous and organic phases. Complete quantification of these equilibria facilitates delineation of the limits of applicability of the linear partitioning assumption, and assessment of potential inaccuracies associated with measurement of partition coefficients at a single concentration. Column experiments were conducted under conditions of non-equilibrium to evaluate the kinetics of the reversible absorption of the selected tracers in a sandy medium containing a uniform entrapped saturation of TCE-DNAPL. Experimental tracer breakthrough data were used, in conjunction with mathematical models and batch measurements, to evaluate alternative hypotheses for observed deviations from linear equilibrium partitioning behavior. Analyses suggest that, although all tracers accumulate at the TCE-DNAPL/aqueous interface, surface accumulation does not influence transport at concentrations typically employed for tracer tests. Moreover, results reveal that the kinetics of the reversible absorption process are well described using existing mass transfer correlations originally developed to model aqueous boundary layer resistance for pure-component NAPL dissolution.  相似文献   

4.
Transport of reactive solute in unsaturated soils under an infiltration-redistribution cycle is investigated. The study is based on the model of vertical flow and transport in the unsaturated zone proposed by Indelman et al. [J. Contam. Hydrol. 32 (1998) 77], and generalizes it by accounting for linear nonequilibrium kinetics. An exact analytical solution is derived for an irreversible desorption reaction. The transport of solute obeying linear kinetics is modeled by assuming equilibrium during the redistribution stage. The model which accounts for nonequilibrium during the infiltration and assumes equilibrium at the redistribution stage is termed partial equilibrium infiltration-redistribution model (PEIRM). It allows to derive approximate closed form solutions for transport in one-dimensional homogeneous soils. These solutions are further applied to computing the field-scale concentration by adopting the Dagan and Bresler [Soil Sci. Soc. Am. J. 43 (1979) 461] column model. The effect of soil heterogeneity on the solute spread is investigated by modeling the hydraulic saturated conductivity as a random function of horizontal coordinates. The quality of the PEIRM is illustrated by calculating the critical values of the Damk?hler number which provide the achievable accuracy in estimating the solute mass in the mobile phase. The distinguishing feature of transport during the infiltration-redistribution cycle as compared to that of infiltration only is the finite depth of solute penetration. For irreversible desorption, the maximum solute penetration W/theta(r) is determined by the amount of applied water W and the residual water content theta(r). For sorption-desorption kinetics, the maximum depth of penetration z(r)(e, infinity ) also depends on the ratio between the rate of application and the column-saturated conductivity. It is shown that z(r)(e, infinity ) is bounded between the depths W/(theta(r)+K(d)) and W/theta(r) corresponding to the maximum solute penetration for equilibrium transport and for irreversible desorption, respectively. This feature of solute penetration explains the unusual phenomena of plume contraction after an initial period of spreading [Lessoff, S.C., Indelman, P., Dagan, G., 2002. Solute transport in infiltration-redistribution cycles in heterogeneous soils. In Raats, P.A.C., Smiles, D.,Warrick, A.W. (Eds), Environmental Mechanics: Water, Mass and Energy Transport in the Biosphere. American Geophysical Union, pp. 133-144]. Unlike transport under equilibrium conditions, when the solute is completely concentrated at the front, the solute under nonequilibrium conditions is spread out behind the front. Heterogeneity leads to additional spreading of the plume.  相似文献   

5.
In a field experiment, two inorganic tracers and five organic solutes were injected into an unconfined sand aquifer. Breakthrough response curves were obtained at several points downgradient of the injection zone. These response curves are analyzed using a model which assumes equilibrium sorption and two models which postulate physical nonequilibrium. The physical nonequilibrium models hypothesize the existence of zones of immobile water, which act as diffusion sources and sinks for the solutes. The physical nonequilibrium models better simulate the sharp breakthrough and extended tailing exhibited by the experimental responses than does the model assuming equilibrium sorption. The reasonableness of parameters obtained from curve-fitting the data is assessed. The two physical nonequilibrium models are compared.  相似文献   

6.
This paper investigates the effects of pore-water velocity on chemical nonequilibrium during transport of Cd, Zn, and Pb through alluvial gravel columns. Three pore-water velocities ranging from 3 to 60 m/day were applied to triplicate columns for each metal. Model results for the symmetric breakthrough curves (BTCs) of tritium (3H2O) data suggest that physical nonequilibrium components were absent in the uniformly packed columns used in these studies. As a result, values of pore-water velocity and dispersion coefficient were estimated from fitting 3H2O BTCs to an equilibrium model. The BTCs of metals display long tailing, indicating presence of chemical nonequilibrium in the system, which was further supported by the decreased metal concentrations during flow interruption. The BTCs of the metals were analysed using a two-site model, and transport parameters were derived using the CXTFIT curve-fitting program. The model results indicate that the partitioning coefficient (beta), forward rate (k1), and backward rate (k2) are positively correlated with pore-water velocity (V); while the retardation factor (R), mass transfer coefficient ((omega), and ratio of k1/k2 are inversely correlated with V. There is no apparent relationship between the fraction of exchange sites at equilibrium (f) and V. The influence of Von k2 is much greater than on R, beta, omega, and k1. A one-order-of-magnitude change in V would cause a two-order-of-magnitude change in k2 while resulting in only a one order-of-magnitude change in R, beta, omega, and k1. The forward rates for the metals are found to be two to three orders-of-magnitude greater than the corresponding backward rate. However, the difference between the two rates reduces with increasing pore-water velocity. Model results also suggest that Cd and Zn behave similarly, while Pb is much more strongly sorbed. At input concentrations of about 4 mg/l and pore-water velocities of 3-60 m/day in the groundwater within alluvial gravel, this study suggests retardation factors of 26-289 for Cd, 24-255 for Zn, and 322-6377 for Pb.  相似文献   

7.
Chang TW  Wang MK 《Chemosphere》2002,48(4):419-426
Many factors affect adsorption phenomena in solid-liquid systems. One of the most important factors is the sorbent/water (S/W) ratio in the system. However, the effect of varying S/W ratios on the adsorption is still unclear. In this study, batch experiments were examined to observe the adsorption of four contaminants (copper, cadmium, Butachlor, and Deltamethrin) in six soils with texture ranging from silty clay to loamy sand and with different S/W ratios. Dimensional analysis was used to assess the relationship between adsorption phenomena and S/W ratio. We have assumed that the total amount of sorbate sorbed in soil is a function of the equilibrium concentration, the volume of sorbate solution, and the sorbent amount in the system. A power function (Freundlich-like) model was obtained from the dimensional analysis. It can describe precisely the adsorption phenomena of different sorbents and sorbates in the moisture regime of paddy soils. Therefore, proper adsorption parameters can be obtained by this power function model regardless of the solids effect, which can then be utilized to describe the fate of solute in soil using solute transport models.  相似文献   

8.
In this note, we applied the temporal moment solutions of [Das and Kluitenberg, 1996. Soil Sci. Am. J. 60, 1724] for one-dimensional advective-dispersive solute transport with linear equilibrium sorption and first-order degradation for time pulse sources to analyse soil column experimental data. Unlike most other moment solutions, these solutions consider the interplay of degradation and sorption. This permits estimation of a first-order degradation rate constant using the zeroth moment of column breakthrough data, as well as estimation of the retardation factor or sorption distribution coefficient of a degrading solute using the first moment. The method of temporal moment (MOM) formulae was applied to analyse breakthrough data from a laboratory column study of atrazine, hexazinone and rhodamine WT transport in volcanic pumice sand, as well as experimental data from the literature. Transport and degradation parameters obtained using the MOM were compared to parameters obtained by fitting breakthrough data from an advective-dispersive transport model with equilibrium sorption and first-order degradation, using the nonlinear least-square curve-fitting program CXTFIT. The results derived from using the literature data were also compared with estimates reported in the literature using different equilibrium models. The good agreement suggests that the MOM could provide an additional useful means of parameter estimation for transport involving equilibrium sorption and first-order degradation. We found that the MOM fitted breakthrough curves with tailing better than curve fitting. However, the MOM analysis requires complete breakthrough curves and relatively frequent data collection to ensure the accuracy of the moments obtained from the breakthrough data.  相似文献   

9.
Organic substrates in reactive barrier systems are often heterogeneous material mixtures with relatively large contrasts in hydraulic conductivity and porosity over short distances. These short-range variations in material properties imply that preferential flow paths and diffusion between regions of higher and lower hydraulic conductivity may be important for treatment efficiency. This paper presents the results of a laboratory column experiment where denitrification is investigated using a heterogeneous reactive substrate (sawdust mixed with sewage sludge). Displacement experiments with a non-reactive solute at three different flow rates are used to estimate transport parameters using a dual porosity non-equilibrium model. Parameter estimation from breakthrough curves produced relatively consistent values for the fraction of the porosity consisting of mobile water (β) and the mass transfer coefficient (α), with average values of 0.27 and 0.42 d(-1), respectively. The column system removes >95% of the influent nitrate at low and medium flow, but only 50-75% of the influent nitrate at high flow, suggesting that denitrification kinetics and diffusive mass transfer rates are limiting the degree of treatment at lower hydraulic residence times. Reactive barrier systems containing dual porosity media must therefore consider mass transfer times in their design; this is often most easily accommodated by adjusting flowpath length.  相似文献   

10.
The spreading of concentration fronts in dynamic column experiments conducted with a porous, aggregated soil is analyzed by means of a previously documented transport model (DFPSDM) that accounts for longitudinal dispersion, external mass transfer in the boundary layer surrounding the aggregate particles, and diffusion in the intra-aggregate pores. The data are drawn from a previous report on the transport of tritiated water, chloride, and calcium ion in a column filled with Ione soil having an average aggregate particle diameter of 0.34 cm, at pore water velocities from 3 to 143 cm/h. The parameters for dispersion, external mass transfer, and internal diffusion were predicted for the experimental conditions by means of generalized correlations, independent of the column data. The predicted degree of solute front-spreading agreed well with the experimental observations. Consistent with the aggregate porosity of 45%, the tortuosity factor for internal pore diffusion was approximately equal to 2. Quantitative criteria for the spreading influence of the three mechanisms are evaluated with respect to the column data. Hydrodynamic dispersion is thought to have governed the front shape in the experiments at low velocity, and internal pore diffusion is believed to have dominated at high velocity; the external mass transfer resistance played a minor role under all conditions. A transport model such as DFPSDM is useful for interpreting column data with regard to the mechanisms controlling concentration front dynamics, but care must be exercised to avoid confounding the effects of the relevant processes.  相似文献   

11.
Rahman MM  Worch E 《Chemosphere》2005,61(10):1419-1426
While the pH effect on sorption equilibrium of weak acids on natural sorbents was investigated in a number of studies, less is known about the pH dependence of sorption kinetics. This paper investigates the impact of pH on sorption kinetics during the transport of some selected phenols through a sandy aquifer material. Breakthrough curves measured in column experiments were analyzed using a mass transfer based nonequilibrium model designated as dispersed flow, film and particle diffusion model (DF-FPDM). In this model, the rate limiting intraparticle diffusion is characterized by the mass transfer coefficient, kSaV, which can be determined from breakthrough curves by curve fitting. The experimental results indicate that the kSaV is pH-dependent and inversely correlated with the pH-dependent distribution coefficient, K(d,app). Regression equations are presented that may be used to estimate approximate values of intraparticle mass transfer coefficients on the basis of experimentally determined or LFER predicted distribution coefficients.  相似文献   

12.
Tracer tests were conducted in three laboratory columns to study changes in the hydraulic properties of a porous medium due to bioclogging. About 30 breakthrough curves (BTCs) for each column were obtained. The BTCs were analyzed using analytical equilibrium and dual-porosity models, and estimates of the hydrodynamic dispersion and mass transfer coefficients were obtained by curve fitting. The change in transport properties developed in three stages: an initial phase (I) with no significant changes in transport properties, phase II with growth of biomass near the inlet of the columns causing changes in dispersivity, and phase III with added growth of micro-colonies deeper in the columns causing mass transfer of solutes from the water phase to the biophase. Tracer transport changed from being uniform to more non-uniform with increase in mass transfer of the tracer between the mobile phase and the immobile biomass. An increase in the bulk dispersivity value of up to one order of magnitude was observed. Numerical simulations suggest that local dispersivity values may be as much as 40 times higher in the more severe clogged areas inside the column. The bulk hydraulic conductivities of the columns decreased by up to three orders of magnitude. The hydraulic conductivity and dispersivity parameters were almost recovered after disinfection of the columns. Different models relating the changes of the hydraulic conductivity to the changes in the mobile porosity due to bioclogging were reviewed, and the micro-colony relation of Thullner et al. [Thullner, M., Zeyer, J., Kinzelbach, W., 2002. Influence of microbial growth on hydraulic properties of pore networks, Transport in Porous Media, 49, 99-122.] was found to best describe the relation between the bulk hydraulic parameters.  相似文献   

13.
A distributed-site non-aqueous phase liquid (NAPL) dissolution model that can capture the physical process of dissolution is presented. The model uses a Pareto distribution of effective interfacial area and a correlation for the mass transfer. Model parameters are obtained using a formal constrained non-linear optimisation technique. The model is applied on effluent data from two soil column experiments. The results of the Pareto distributed site model, with only two parameters to fit, were compared to two-site and multi-site models as well as the beta distributed site model. The Pareto distributed-site model produces equal or smaller error estimates than the other models.  相似文献   

14.
Four simplified dense non-aqueous phase liquid (DNAPL) source depletion models recently introduced in the literature are evaluated for the prediction of long-term effects of source depletion under natural gradient flow. These models are simple in form (a power function equation is an example) but are shown here to serve as mathematical analogs to complex multiphase flow and transport simulators. The spill and subsequent dissolution of DNAPLs was simulated in domains having different hydrologic characteristics (variance of the log conductivity field=0.2, 1 and 3) using the multiphase flow and transport simulator UTCHEM. The dissolution profiles were fitted using four analytical models: the equilibrium streamtube model (ESM), the advection dispersion model (ADM), the power law model (PLM) and the Damkohler number model (DaM). All four models, though very different in their conceptualization, include two basic parameters that describe the mean DNAPL mass and the joint variability in the velocity and DNAPL distributions. The variability parameter was observed to be strongly correlated with the variance of the log conductivity field in the ESM and ADM but weakly correlated in the PLM and DaM. The DaM also includes a third parameter that describes the effect of rate-limited dissolution, but here this parameter was held constant as the numerical simulations were found to be insensitive to local-scale mass transfer. All four models were able to emulate the characteristics of the dissolution profiles generated from the complex numerical simulator, but the one-parameter PLM fits were the poorest, especially for the low heterogeneity case.  相似文献   

15.
Sorption equilibria and rates were characterized for a matrix of four aquifer sands and two slightly to moderately hydrophobic organic solutes (nitrobenzene and lindane), and the effects of sorption on the behavior of these solutes in saturated systems of the soils were determined. Experimental data were used to test and evaluate a variety of mathematical models for predicting contaminant fate and transport in groundwater systems.Observed equilibrium relationships between soil and solution phase solute concentrations were found to be described best by the nonlinear Freundlich isotherm model. It was further determined that the sorption process in the systems tested is rate controlled, requiring several days to approach equilibrium in completely mixed batch reactors. Subsequent modeling of solute transport in continuous flow soil column reactors was found to be most successful when rate-controlled models were used, the best results were obtained with a dual-resistance model incorporating the coupled mass transport steps of boundary-layer and intraparticle diffusion.  相似文献   

16.
Fractures and biopores can act as preferential flow paths in clay aquitards and may rapidly transmit contaminants into underlying aquifers. Reliable numerical models for assessment of groundwater contamination from such aquitards are needed for planning, regulatory and remediation purposes. In this investigation, high resolution preferential water-saturated flow and bromide transport data were used to evaluate the suitability of equivalent porous medium (EPM), dual porosity (DP) and discrete fracture/matrix diffusion (DFMD) numerical modeling approaches for assessment of flow and non-reactive solute transport in clayey till. The experimental data were obtained from four large undisturbed soil columns (taken from 1.5 to 3.5 m depth) in which biopores and channels along fractures controlled 96-99% of water-saturated flow. Simulating the transport data with the EPM effective porosity model (FRACTRAN in EPM mode) was not successful because calibrated effective porosity for the same column had to be varied up to 1 order of magnitude in order to simulate solute breakthrough for the applied flow rates between 11 and 49 mm/day. Attempts to simulate the same data with the DP models CXTFIT and MODFLOW/MT3D were also unsuccessful because fitted values for dispersion, mobile zone porosity, and mass transfer coefficient between mobile and immobile zones varied several orders of magnitude for the different flow rates, and because dispersion values were furthermore not physically realistic. Only the DFMD modeling approach (FRACTRAN in DFMD mode) was capable to simulate the observed changes in solute transport behavior during alternating flow rate without changing values of calibrated fracture spacing and fracture aperture to represent the macropores.  相似文献   

17.
A travel-time based approach is developed for estimating first-order reaction rate coefficients for transport with nonequilibrium linear mass transfer in heterogeneous media. Tracer transport in the mobile domain is characterized by a travel-time distribution, and mass transfer rates are described by a convolution product of concentrations in the mobile domain and a memory function rather than predefining the mass transfer model. A constant first-order reaction is assumed to occur only in the mobile domain. Analytical solutions in Laplace domain can be derived for both conservative and reactive breakthrough curves (BTCs). Temporal-moment analyses are presented by using the first and second moments of conservative and reactive BTCs and the mass consumption of the reactant for an inverse Gaussian travel-time distribution. In terms of moment matching, there is no need for one to specify the mass transfer model. With the same capacity ratio and the mean retention time, all mass transfer models will lead to the same moment-derived reaction rate coefficients. In addition, the consideration of mass transfer generally yields larger estimations of the reaction rate coefficient than models ignoring mass transfer. Furthermore, the capacity ratio and the mean retention time have opposite influences on the estimation of the reaction rate coefficient: the first-order reaction rate coefficient is positively linearly proportional to the capacity ratio, but negatively linearly proportional to the mean retention time.  相似文献   

18.
19.
This study develops a modeling approach for simulating and evaluating entrapped light nonaqueous-phase liquid (light NAPL-LNAPL) dissolution and transport of the solute in a fractured permeable aquifer (FPA). The term FPA refers to an aquifer made of porous blocks of high permeability that embed fractures. The fracture network is part of the domain characterized by high permeability and negligible storage. Previous studies show that sandstone aquifers often represent FPAs. The basic model developed in this study is a two-dimensional (2-D) model of permeable blocks that embed oblique equidistant fractures with constant aperture and orientation. According to this model, two major parameters govern NAPL dissolution and transport of the solute. These parameters are: 1) the dimensionless interphase mass transfer coefficient, K(f0), and 2) the mobility number, N(M0). These parameters represent measures of heterogeneity affecting flow, NAPL dissolution, and transport of the solute in the domain. The parameter K(f0) refers to the rate at which organic mass is transferred from the NAPL into the water phase. The parameter N(M0) represents the ratio of flow through the porous blocks to flow through the fracture network in regions free of entrapped NAPL. It also provides a measure of groundwater flow bypassing regions contaminated by entrapped NAPL. In regions contaminated by entrapped NAPL our simulations have often indicated very low permeability of the porous blocks, enabling a significant increase of the fracture flow at the expense of the permeable block flow. Two types of constitutive relationships also affect the rate of FPA cleanup: 1) the relationship between the saturation of the entrapped NAPL and the permeability of the porous blocks, and 2) the relationships representing effects of the entrapped NAPL saturation and the permeable block flow velocity on rates of interphase mass transfer. This study provides basic tools for evaluating the characteristics of pump-and-treat cleanup of FPAs by referring to sets of parameters and constitutive relationships typical of FPAs. The numerical simulations carried out in this study show that at high initial saturation of the entrapped NAPL, during initial stages of the FPA cleanup the contaminant concentration increases, but later it decreases. This phenomenon originates from significant groundwater bypassing the NAPL entrapped in the permeable blocks via the fracture network.  相似文献   

20.
The conditions under which rate-limited sorption is important for cleanup of layered soils by vapor extraction are investigated. The investigation includes two steps: (a) the cleanup time is estimated for a number of scenario cases by means of a numerical model and (b) the numerical results are approximated using analytical solutions derived for simplified models. In this way, equations are derived, which give insight into the influence of different parameters characterizing the properties of the soil, the geometry of the formation, the mass transfer mechanisms in it, and the distribution of the contaminant mass in the different phases (gas phase, water phase and solid phase). The numerical model used is based on the advection-dispersion differential equations for Darcian isothermal airflow, local equilibrium contaminant mass transfer between gas phase and soil water and first-order kinetics for mass transfer between soil water and solid phase. The numerical results are approximated combining an analytical solution to estimate cleanup time in layered formations for local equilibrium sorption, which has been presented in a previous work (J. Contam. Hydrol., 36 (1999) 105). with an analytical solution based on the well-mixed reservoir model under consideration of rate-limited sorption. The analytical approximation of the cleanup time is in reasonable agreement with the numerical results and allows its estimation with small computational effort.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号