Biodegradability and compostability of polymers—test methods and criteria for evaluation

The treatment of solid waste in controlled composting facilities is an important possibility for reducing garbage. Natural and synthetic polymeric materials can be used for many purposes, for example, as packaging materials, where compostability is required. A prerequisite for official regulations and the decision as to which materials may be composted is investigations on their biodegradability and the quality of the compost produced. Several standardization groups at the ISO, CEN, and DIN are developing definitions, test methods, and classification systems for differentiating compostable from noncompostable materials. The concept which will be standardized and used in Germany is described in detail. It includes characterization of the test material, determination of the biodegradability using laboratory tests such as simple aquatic batch tests and a controlled aerobic composting test, investigation of the disintegration of the test material in industrial or bench-scale composting facilities, and finally, chemical and ecotoxicological analysis of the compost produced.     

Study of Trace and Heavy Metals in Rural and Urban Aerosols of Uludağ and Bursa (Turkey)

The concentrations of heavy, trace elements and major ions measuredin the Uluda and Bursa aerosols were investigated to assess size distributions, spatial and temporal variability, sources and source regions affecting the composition of aerosols in Uluda and Bursa. A total of 81 samples were collected in two sites, one in Bursa city and another in the Uluda Mountain during two sampling campaigns. Daily samples were collected using a high volume sampler on Whatman 41 cellulose filters in Uluda, while three days interval samples were collected in Bursa using an automatic dichotomous sampler on PTFE Teflon filters. Samples were analysed for 15 trace and heavy metals (Al, Fe, Ba, Na, Mg, K, Mn, Ca, Cu), (V, Pb, Cd, Cr, Ni, Zn), and 4 major ions (SO₄ ^2-, NO₃ ^-, Cl^-), (NH₄ ⁺) using ICP-AES, GFAAS, HPLC and UV/VIS Spectrophotometer,respectively. In general, concentrations of the metals measured inUluda aerosols were lower than those in Bursa. The concentrations of crustal elements were higher in summer than winter, while anthropogenic elements had higher concentrations in winter than summer. Most of the mass of crustal elements was concentrated in the coarse mode while the mass of the heavy metals was concentrated in the fine mode. Factor analysis revealed four factors with sources including crustal, industrial and combustion. Back trajectory calculations were used to determine long range contributions. These calculations showed that contributions were mostly from European countries, former Soviet Union countries, Black Sea and North Africa.     

Australia's National Plan to Combat Pollution of the Sea by Oil and Other Noxious and Hazardous Substances – Overview and Current Issues

Australia's National Plan to Combat Pollution of the Sea by Oil and Other Noxious and Hazardous Substances (the National Plan) has operated since 1973. The objectives of the National Plan are based on Australia's obligations as a signatory to the International Convention on Oil Pollution Preparedness, Response and Co-operation 1990 and a responsibility to protect natural and artificial (man made) environments from the adverse effects of oil pollution and minimise those effects where protection is not possible.The Australian Maritime Safety Authority (AMSA) is the managing agency of the National Plan, working together with the States and Northern Territory governments, other Commonwealth agencies, ports, and the shipping, oil and exploration industries, to maximise Australia's marine pollution response capability.The 1990s have been a period of significant change for oil spill response arrangements in Australia. The National Plan was extended in 1998 to cover chemical spills and is currently in the process of implementing the oil spill response incident control system (OSRICS). A fixed wing aerial dispersant spraying capability was implemented in 1996 and a research and development program has been put in place. The development of a computer-based National Oil Spill Response Atlas was a major project completed during 1999.     

Physical properties and biodegradability of blends containing poly(ε-caprolactone) and tropical starches

In order to assess feasibility of tropical starches (sago and cassava starches) as biodegradable plastic materials, blending with poly(-caprolactone) (PCL), a biodegradable polymer, was carried out. It was confirmed that the physical properties (tensile strength and elongation) of PCL/sago and PCL/cassava blends were similar to those of PCL/corn blend, suggesting that sago and cassava starches can also be blended with PCL for production of biodegradable plastic. However, the properties of all PCL/starch blends were still low compared with those of polyethylene. Enzymatic degradability evaluation showed that lipase degradation of PCL and-amylase degradation of starch increased as the starch content in the blend increased. Burial test of the blends for 1, 3, and 5 months was carried out and the rate of degradation of the PCL/sago blend was confirmed to be slower than those of PCL/corn and PCL/cassava blends. Observation of the film blends structure by scanning electron microscope revealed that the starch was dispersed in a PCL continuous phase. Furthermore, changes in the film surface before and after enyzme treatments were observed.     

CHEMIFOG_V – A Model to Simulate Radiation Fogs and their Interaction with Vegetation and Chemistry

Radiation fog is an important modifier of atmosphericcompounds in the planetary boundary layer. In vegetated areas effects are especially pronounced due to the enlarged surface area. Besides affectingthe lower boundary of atmospheric models fog acts as amulti-phase reaction chamber leading to acid deposition. Here we present the 1-dimensional radiation fog modelCHEMIFOG_V to simulate regional radiation fogevents. The key feature of the fog model is thedetailed microphysics, where the aerosol/dropletspectrum is describedwith a joint 2-dimensional distribution, but also thedynamics, thermodynamics, and radiative transfer are calculated. Toinvestigate the interaction between fog and the biosphere amulti-layer vegetation module, including a soil module as well as a drydeposition module were coupled. Vegetation influences thedynamics, thermodynamics, and the radiation field of the lowestatmospheric layers. With CHEMIFOG_V, numerical case studieson dry and moist deposition processes on vegetation surfaces wereperformed. Hereby multi-phase chemistry and the processing of aerosolswere considered. The results show that the chemical composition of thedeposited fog droplets is mainly determined by the aerosol composition. Dry deposition fluxes are dependent on the incoming radiation and the leaves' surface conditions with respect to water coverage.Due to chemical aerosol processing and deposition, the aerosol spectrumis significantly modified in the planetary boundary layer.     

On Sand and Duststorms and Associated Significant Dustfall Observed in Chongju-Chongwon,Korea during 1997–2000

Monitoring of the occurrence of sandstorms and dustfallphenomena from 1997 to 2000 was carried out. We refer tosandstorms, duststorms and blowing sand as the phenomenaoccurring in the source region, while significant dustfall is thephenomenon that occur in the sink area. It was noted that while the sandstorms in deserts and loess in NW-N China and Mongolia occurred any time during the year while severe sandstorms occurred frequently from March to May after the springthaw. The wind erosion in the source region usually occurred withwind speeds greater than 8 ms^-1. However, severe sandstorm phenomenon occurred with wind greater than 15 ms^-1 for at least 3 hr or more. In the source regions, sandstorms occurred over60–120 days per year. In Mongolia, the observation of thenumber of sandstorm days decreased due to the increase in rainy days.When a dust cloud from a desert reached the sink region,significant dustfall in the Korean Peninsula occurred due tothe lack of strong winds. We defined the episode ofsignificant dustfall (SD) with the following values: TSP250, PM₁₀ 190 g m^-3 and visibility 6.5 km or less. In Korea, 8–12 episodes of SD occurred per yearwith 12 to 22 SD days. The maximum concentrations of TSP recorded were 989–1396 g m^-3 with PM₁₀ values of 861–996 g m^-3 and with the lowestvisibility of 1.4–1.6 km.     

Hydrolytic and enzymatic degradation of poly(γ-glutamic acid) hydrogels and their application in slow-release systems for proteins

The hydrolytic and enzymatic degradation of newly developed hydrogels, produced by cross-linking purified poly(-glutamic acid) (PGA) with dihaloalkane compounds, was studied and is reported in this paper. Analysis of hydrolysis of the hydrogel as a function of pH indicated that the hydrolysis occurred slowly at neutral pH, but fast in both acidic and alkaline solutions, while the polymer could be hydrolyzed rapidly only in acidic solutions. The ester bonds were more sensitive to hydrolysis than peptide bonds. The biodegradability of the hydrogel and polymer was further confirmed when enzymatic degradation was studied by three enzymes (cathepsin B, pronase E, and trypsin), which were able to cleave both ester and peptide bonds gradually. A slow-release system for porcine somatotropin (pST) formed by using the hydrogel as matrix to entrap the hormone was evaluatedin vitro andin vivo. Results demonstrated that the hydrogel was able to release the hormone for a period of 20–30 days and indicated its potential application in slow-release systems for bioactive materials, especially macromolecules, such as peptides and proteins.     

Chemical and Ecotoxicological Characterisation of Oil–Water Systems

An ongoing chemical and ecotoxicological study of Water Accommodated Fraction of oils is presented and the preliminary findings are discussed. The study aims at obtaining improved and realistic data on potential environmental effects of various oils released and weathered at sea. Such data will be used for improving algorithms in present fate and effect models for damage assessment studies and “Net Environmental Benefit Analysis” of response alternatives in various spill scenarios. Preliminary results show that models used to assess effects in the water column will need to resolve the water soluble fraction of oils into more than one single bulk parameter to produce realistic estimates of effects.     

Synthesis and biodegradation of poly(γ-butyrolactone-co-l-lactide)

Biodegradable polyesters were synthesized by ring-opening copolymerization of -butyrolactone (BL) and its derivatives withl-lactide (LLA). Although tetraphenyl tin was the main catalyst used, other organometallic catalysts were used as well.¹H and¹³C NMR spectra showed that poly(BL-co-LLA)s were statistical and that their number-average molecular weights were as high as 7×10⁴. The maximum BL content obtained from copolymerization BL/LLA was around 17%. TheT _m andT _g values of the copolymers showed a gradual depression with an increase in BL content. NoT _m was obtained for the copolymers containing more than 13 mol% BL. The biodegradability of the copolyesters was evaluated by enzymatic hydrolysis and nonenzymatic hydrolysis tests. The enzymatic hydrolysis was carried out at 37°C for 24 h using lipases fromRhizopus arrhizus andR. delemar. Hydrolyses by both lipases showed that an increase in BL content of the copolymer resulted in enhanced biodegradability. Nonenzymatic accelerated hydrolysis of copolymers at 70°C was found to increase proportionally to their exposure time. The hydrolysis rate of these copolymers was considerably faster than that of PLLA. The higher hydrolyzability was recorded for the BL-rich copolymers. The copolymerization of -methyl--butyrolactone (MBL) or -ethyl--butyrolactone (EBL) with LLA resulted in relatively LA-rich copolymers.     

Heavy Metals in Stockholm Groundwater – Concentrations and Fluxes

Sampling of groundwater in theQuaternary deposits was carried out at 70 sitesin Stockholm for, among other things, metalanalyses. The objectives were to get a notion of the metal content and to get a basis for anestimation of the order of magnitude of thegroundwater transported metal contribution to themain surface water bodies in comparison to otherroutes. Thus, in three watershed areaswithin the Stockholm Town, groundwater flow andmetal concentration propagation were simulatedand metal fluxes were calculated. Theconcentrations of heavy metals were in generalfound to be very high in comparison withgroundwater in forested areas. This was mostpronounced for mercury (Hg) and copper (Cu). Themost remarkable result was a Hg concentration of4.57 g L^-1 in the vicinity of a closed downhospital. The annual contribution of heavy metals(kg) by groundwater to the main surface waterbodies was estimated to: As (2.2), Cd (0.20), Co(4.9), Cr (3.1), Cu (34), Hg (0.06), Ni (28), Pb(2.2) Zn (118). These fluxes are much smallerthan those in forest ecosystems, due to lowergroundwater recharge in urban areas, where agreat part of the runoff is diverted bylandsealing, drainage, tunnels etc. The modelingresults emphasize the importance of the sorptionprocesses indicating that the modeled areas arein a non-steady state condition. It also showsthat the sources generating elevatedconcentrations of the high adsorptive metals Pband Hg are likely to be nearby.     

Synthesis,Characterization and Application of α, β, and γ Cyclodextrin-Conjugated Graphene Oxide for Removing Cadmium Ions from Aqueous Media

In this study, a novel and facile route for the synthesis of cyclodextrin-conjugated graphene oxide (CDs–GO) nanocomposites by esterification reaction in the presence of EDC/DMAP as catalyst, was developed. The formation of CDs–GO was successfully approved by FT-IR, SEM, TEM, TGA and BET analyses. Then competitive adsorption capacity of cadmium ion by CDs–GO composites and the impact of different empirical parameters like contact time, initial metal ion concentration, and initial pH on the adsorption process were studied. The results showed that β-CD–GO at pH 7 is suitable for removing Cd(II) with 90?% removal efficiency. Also, the adsorption capacity experiment at constant concentration of 50 ppm of Cd(II) showed that more than 50?% of Cd(II) ions could be adsorbed by γ-CD–GO reaching an equilibrium within 2 h. Therefore, the γ-CD–GO and α-CD–GO showed high adsorption capacity toward Cd²⁺ (222.22 mg/g) which were pointedly more than that of β-CD–GO (208.33 mg/g). Furthermore, adsorption kinetics, isotherm studies, and thermodynamic analyses were evaluated. The adsorption data exhibited excellent fit to the pseudo-second-order (R²?>?0.99) and Freundlich isotherm models.

     

Preparation conditions and swelling equilibria of biodegradable hydrogels prepared from microbial poly(γ-glutamic acid) and poly(ε-lysine)

Biodegradable hydrogels prepared by -irradiation from microbial poly(amino acid)s are reviewed. pH-sensitive hydrogels were prepared by means of -irradiation of poly(-glutamic acid) (PGA) produced byBacillus subtilis IFO3335 and poly(-lysine) (PL) produced byStreptomyces albulus in aqueous solutions. The preparation conditions, swelling equilibria, hydrolytic degradation, and enzymatic degradation of these hydrogels were studied. A hydrogel with a wide variety of swelling behaviors has been produced by -irradiation from a mixture solution of PGA and PL.Paper presented at the 4th International Workshop on Biodegradable Plastics and Polymers, October 11–14, 1995, Durham, New Hampshire, USA.     

Synthesis of copolyesters containing poly(ethylene terephthalate) and poly(ε-caprolactone) units and their susceptibility toPseudomonas sp. lipase

Copolyesters containing poly(ethylene terephthalate) (PET) and poly(-caprolactone) (PCL) were synthesized from PET and PCL homopolymers by transesterification reaction at 270°C in the presence of catalyst. The copolyesters were characterized by¹³C-NMR and differential scanning calorimetry (DSC). The degradation behavior of PCL byPseudomonas sp. lipase in buffer solution (pH 7) and tetrahydrofuran (THF) was investigated by gel permeation chromatography (GPC) and¹H-NMR. From these experiments, it was found thatPseudomonas sp. lipase acted endoenzymatically on PCL. Using this lipase, degradation tests for PET/PCL copolyesters whose PCL content was below 50% by weight were also performed in buffer solution (pH 7). However, evenPseudomonas sp. lipase with high degradation activity on PCL did not easily degrade the PCL unit in PET/PCL copolyesters.     

Characteristics and Bioactivities of Carrageenan/Chitosan Microparticles Loading α-Mangostin

Journal of Polymers and the Environment - This study attempted to develop carrageenan/chitosan based microparticles loading α-mangostin which was extracted from Vietnamese mangosteen skin. The...     

Preparation of Magadiite-Sodium Alginate Drug Carrier Composite by Pickering-Emulsion-Templated-Encapsulation Method and Its Properties of Sustained Release Mechanism by Baker–Lonsdale and Korsmeyer–Peppas Model

Journal of Polymers and the Environment - In this study, the nanohybrid drug carrier were synthesized by Pickering emulsion-templated encapsulation (PETE) method to control the...     

Synthesis,Characterization and Antibacterial Activity of Novel β-cyclodextrin Polyurethane Materials

Journal of Polymers and the Environment - The advanced water treatment taken by organic micro-pollution or microbiological pollution water resource has been a hot issue of public concern. In this...