Partitioning of chloroaromatic compounds between the aqueous phase and dissolved and particulate soil organic matter at chlorophenol contaminated sites

The retention and mobility of hydrophobic organic contaminants (HOCs) in soil is mainly determined by hydrophobic partitioning to dissolved and particulate organic matter (DOM and POM, respectively). The aqueous phase, DOM, and POM fractions were extracted and separated from soils at three sites contaminated with technical chlorophenol formulations. Concentrations of chlorophenols (CP), polychlorinated phenoxyphenols (PCPP), polychlorinated diphenyl ethers (PCDE) and polychlorinated dibenzo-p-dioxins and furans (PCDD/F) were determined. The partitioning to POM, in relation to DOM, increased in all three soils with increasing hydrophobicity in the order CP < PCPP ~ PCDE ~ PCDF < PCDD. Differences in partitioning to DOM (logK(DOC)) and POM (logK(POC)) could not be explained by differences in gross organic C chemistry. Black carbon did not contribute significantly to the sorption of PCDDs, whereas >70% wood fibre in one soil resulted in a decrease of logK(POC) of 0.5 units for CPs and PCDDs. We conclude that logK(OC) for both DOM and POM need to be explicitly determined when the retention and mobility of HOCs is described and modelled in soils.     

Partitioning of selected environmental pollutants into organic matter as determined by solid-phase microextraction

Partitioning/sorption of selected environmental pollutants (PCBs, organochlorine insecticides, triazine and amide herbicides) into dissolved humic acids (HA), soil and mineral substances was evaluated by measuring their free concentrations by solid-phase microextraction (SPME). Compounds were chosen to cover a wide range of logK(ow) (2.2-7.6). Two different types of partitioning behaviour for dissolved HA were observed. Compounds with logK(ow)>5 partitioned almost instantly into HA fraction and the remaining free fraction remained rather constant. LogK(HA) and logK(DOC) were calculated and found to be similar for commercial HA, HA standard and isolated HA. The behaviour of these compounds in soil suspension was similar, but strong sorption on CaCO3 and Florisil was also noticed. For compounds with logK(ow)<5, we have not noticed significant changes in free concentrations in HA solutions over time. In soil suspension, however, some sorption/partitioning was observed over time for some compounds, but it was matching the sorption on CaCO3 and Florisil.     

Concentrations and specific loads of brominated flame retardants in sewage sludge

Many substances related to human activities end up in wastewater and accumulate in sewage sludge. The present study focuses on two classes of brominated flame retardants: polybrominated diphenyl ethers (BDE28, BDE47, BDE49, BDE66, BDE85, BDE99, BDE100, BDE119, BDE138, BDE153, BDE154, BDE183, BDE209) and hexabromocyclododecane (HBCD) detected in sewage sludge collected from a monitoring network in Switzerland. Mean concentrations (n=16 wastewater treatment plants) were 310, 149, 95 and 17microg per kg dry matter for decaBDE, HBCD, penta- and octaBDE, respectively. These numbers correspond well with other studies from European countries. DecaBDE, HBCD, penta- and octaBDE showed average specific loads (load per connected inhabitant per year) in sludge of 6.1, 3.3, 2.0 and 0.3mgcap(-1)yr(-1), respectively. This is in line with consumption and storage of the compounds in the environment and the anthroposphere. Discrepancies observed for octaBDE and HBCD can be explained by the release from materials where these compounds are incorporated in and/or their degradation during anaerobic sludge treatment. Loads from different types of monitoring sites showed that brominated flame retardants ending up in sewage sludge originate mainly from surface runoff, industrial and domestic wastewater.     

Hydroxylated polybrominated diphenyl ethers (OH-PBDEs) in biosolids from municipal wastewater treatment plants in China

Hydroxylated polybrominated diphenyl ethers (OH-PBDEs) along with methoxylated polybrominated diphenyl ethers (MeO-PBDEs) have been frequently identified as natural compounds in marine environment and also assumed as metabolites of PBDEs. In the present study, nine OH-PBDE, nine MeO-PBDE and 10 PBDE congeners were studied in the sewage sludge collected from 36 municipal wastewater treatment plants (WWTPs) in 27 cities of China. The results suggest that OH-PBDEs and PBDEs are ubiquitous in sewage sludge in China, however, methoxylated PBDEs were not detectable. Composition profiles of detected OH-PBDE congeners were different depending on the sampling location. ΣOH-PBDEs in WWTPs sludge ranged from 0.04 to 2.24 ng g^?1 dry weight (mean: 0.35 ng g^?1 dry weight). The total amount of the two most prominent congeners (6-OH-BDE-47 + 2′-OH-BDE-68) accounted for about 53.3–100% of the sum of all six identified congeners. A significant linear relationship was found between 6-OH-BDE-47 and 2′-OH-BDE-68. A distinct geographical distribution of ΣOH-PBDEs was observed with greater concentrations of OH-PBDEs at coastal areas than inland regions in China.     

Physical origin for the nonlinear sorption of very hydrophobic organic chemicals in a membrane-like polymer film

Bioconcentration factor (BCF) is often assumed to be linearly associated with the octanol-water partition coefficient K(ow) for hydrophobic organic chemicals (HOCs). However, a large amount of data has suggested that the correlation between the logBCF and logK(ow) is curvilinear for HOCs. Similar curvilinear relationship has also been noticed for sorption of HOCs into poly(dimethyl)siloxane (PDMS), a polymer with cross-linked interior structures. So far no satisfactory explanation has been given to account for the deviation. In this study, we acquired additional experimental data to show that the curvilinear relationship between the log-based PDMS-coated fiber-water partition coefficient (logK(f)) and logK(ow) for polychlorinated biphenyls (PCBs) was indeed a reflection of the sorption process occurring in PDMS film other than experimental defects. The physical origin of the nonlinearity was pinpointed based on the theory of phase partitioning for HOCs. The linear relationship is observed if the solute molecule is considerably smaller than the size of a monomer unit of PDMS in that the Gibbs free energy required for cavity formation in PDMS is comparable to that in octanol. Higher free energy of cavity formation is needed to create sufficient free volume if the PCB molecular size is comparable to or larger than the monomer unit of PDMS. On the other hand, the free energy of cavity formation in octanol remains almost constant when this occurs, resulting in the observed curvilinear relationship. The proposed model adequately explains the observed data, as well as sheds lights into the physical origin of the steric interactions of large molecular size solute with the PDMS polymer network.     

壬基酚及其短链聚氧乙烯醚在污泥和土壤中的存在和降解

壬基酚聚氧乙烯醚(NPnEO)是广泛使用的表面活性剂．在污水处理厂中会降解为具有内分泌干扰效应的短链产物和最终产物壬基酚(NP)。剩余污泥是其进入环境的重要途径。介绍了NP和短链NPnEO在污泥中的存在情况、污泥处理过程对其存在的影响、以及这些物质随污泥处置过程进入土壤后的降解。     

Congener-specific accumulation and environmental risk assessment of polybrominated diphenyl ethers in diverse Korean sewage sludge types

Industrial, domestic wastewater, and livestock sludge samples were collected from 23 wastewater treatment plants in Korea and analyzed for polybrominated diphenyl ethers (PBDEs). The concentrations of Σ₁₉PBDE ranged from 4.01 to 10,400 ng/g dry weight. The average Σ₁₉PBDE concentrations in industrial, domestic wastewater, and livestock sludge were 1,560?±?3,610, 402?±?148, and 27.6?±?50.4 ng/g dry weight, respectively. The composition of PBDEs differed according to the type of sludge. Among the PBDE congeners, BDE 209 was dominant in all sludge samples. After BDE 209, relatively high levels were found for BDE 28 and 47 from industrial sludge, BDE 47 and 99 from domestic wastewater sludge, and BDE 206, 207, and 208 from livestock sludge. Using hierarchical cluster analysis, sludges were divided into three groups according to PBDE congener composition. A risk assessment of PBDEs in sludge used for soil amendment was carried out. Preliminary results indicated that the potential risk of soil exposed to PBDEs in sludge was relatively low.     

Sorption of naphthalene derivatives to soils from a long-term field experiment

The influence of long-term farming practices on the soil's behaviour to adsorb hydrophobic organic compounds (HOCs) over long times was investigated. Adsorption of five naphthalene derivatives (naphthalene, 1-naphthol, 1-naphthylamine, 1-hydroxy-2-naphthoic acid, 1,4-naphthoquinone) was examined on soils with varying amounts and origins of soil organic matter obtained after amendment with different organic materials over more than 40 years. Soil organic matter, pore sizes and aggregate stability were significantly altered influencing the adsorption behaviour of the soils. Samples of soil amended with peat having an organic carbon content of 3.4% sorbed naphthalene derivatives stronger than the soil treated with sewage sludge (2.6% C(org)). All other treatments, calcium nitrate, plots without nitrogen fertilizers, grassland, animal manure, green manure and the fallowed soil sorbed less and no significant difference was found between them although the organic carbon content ranged from 1.0% to 2.6%. Thus, a decrease of the carbon content of a soil does not necessarily imply a reduction of sorption capacities for hydrophobic compounds such as naphthalene derivatives. Furthermore, the importance of protonation of HOCs for the adsorption on soil surfaces was shown. Different polarities of electronic structures of HOCs distinctly influence their adsorption behaviour.     

Maternal transfer of organohalogen contaminants and metabolites to eggs of Arctic-breeding glaucous gulls

Eggs of seabirds have routinely been used as indicators of environmental pollution in the Arctic. However, the variability in organohalogen concentration and composition associated with the laying sequence, have not been defined. We examined a suite of PCBs, organochlorine (OC) pesticides and by-products, polybrominated diphenyl ethers (PBDEs), polybrominated biphenyls (PBBs) and methylsulfonyl- (MeSO2) PCBs in complete 3-egg clutches of glaucous gulls (Larus hyperboreus), and plasma samples of the laying females collected from the Norwegian Arctic. SigmaPCB, SigmaOC and SigmaPBDE, but not SigmaMeSO2-PCB, concentrations in eggs were positively associated, with increasing magnitude and significance from the first through the last-laid egg, with concentrations in female plasma. However, the concentrations of these organohalogen classes fluctuated irrespective of the laying order in the clutch. In general, maternal transfer favored low K(ow) and/or less persistent compounds, whereas the recalcitrant and/or higher-halogenated compounds were less readily transferred, and consequently more selectively retained in the mother.     

Structure-activity relationships for association of linear alkylbenzene sulfonates with activated sludge

Sorption of linear alkylbenzene sulfonates (LAS) on sludge particles from wastewater treatment plants was studied. The effect of alkyl chain length and the water hardness were investigated. Sorption on sludge increases with increasing alkyl chain length in the LAS molecules. The results are interpreted in terms of a hydrophobic bonding mechanism being the critical micelle concentration a good index of the surfactant hydrophobicity. The increase in free energy of adsorption for the addition of successive methylene groups to the alkyl chain was estimated as 2.4 kJ/mol. Water hardness clearly enhances the sorption of LAS homologues on sludge and seems to promote cooperative sorption at high surfactant and calcium ion concentrations. An empirical equation was provided that allow to estimate the partition coefficient between aqueous and solid phases for LAS homologues as a function of the alkyl chain length and the water hardness.     

Polybrominated diphenyl ethers and polybrominated biphenyls in Australian sewage sludge

This paper presents a brief review of the international scientific literature of polybrominated diphenyl ethers (PBDEs) and polybrominated biphenyls (PBBs) in sewage sludge and a survey of these compounds in sewage sludge from 16 Australian wastewater treatment plants (WWTPs). The SigmaPBDE mean concentration in the Australian study was 1137microgkg(-1) dry weight (d.w.) (s.d. 1116) and ranged between 5 and 4 230microgkg(-1)d.w. The urban mean of 1308microgkg(-1) (s.d. 1320) and the rural mean of 911microgkg(-1) (s.d. 831) are not statistically different and are similar to levels in European sludges. Principal components analysis was performed on the data set and revealed that 76% of the data variation could be explained by two components that corresponded to overall concentration of the pentaBDE and the decaBDE commercial formulations. An analysis of variance was performed comparing PBDEs levels at three WWTPs over the years 2005 and 2006, finding differences between treatment plants (BDE-47) but no significant difference in PBDE levels in the years 2005 and 2006. Low levels of BB-153 were detected in all samples of this survey (n=16); mean 0.6microgkg(-1)d.w. (s.d. 0.5). This compound has rarely been reported in any other study of sewage sludges undertaken outside Australia. This work highlights the need for a risk assessment of PBDEs in sewage sludge when used for land application, taking into account typical levels found in Australian sludges and soils.     

Distribution and levels of brominated flame retardants in sewage sludge

One hundred and sixteen sewage sludge samples from 22 municipal wastewater treatment plants in Sweden were analysed for brominated flame retardants. Polybrominated diphenyl ethers (PBDEs) were in the range n.d.-450 ng/g wet weight, tetrabromobisphenol A (TBBPA) varied between n.d. and 220 ng/g wet weight, 2,4,6-tribromophenol was in the range n.d.-0.9 ng/g wet weight and polybrominated biphenyls were not detected (except for a possible analytical interference). There was a significant variation in the samples among plants. Influence from industries and other local sources can therefore be assumed. The correlation pattern indicated contribution from three different types of technical products; composed of either low-brominated PBDEs, decaBDE or TBBPA.     

Halogenated organic compounds in archived whale oil: a pre-industrial record

To provide additional evidence that several halogenated organic compounds (HOCs) found in environmental samples are natural and not industrially produced, we analyzed an archived whale oil sample collected in 1921 from the last voyage of the whaling ship Charles W. Morgan. This sample, which pre-dates large-scale industrial manufacture of HOCs, contained two methoxylated polybrominated diphenyl ethers (MeO-PBDEs), five halogenated methyl bipyrroles (MBPs), one halogenated dimethyl bipyrrole (DMBP), and tentatively one dimethoxylated polybrominated biphenyl (diMeO-PBB). This result indicates, at least in part, a natural source of the latter compounds.     

Soot sorption of non-ortho and ortho substituted PCBs

Field-observations of distribution coefficients well above expectations from bulk organic-matter partitioning for several chlorinated aromatic compound classes have lead to the hypothesis that enhanced affinity to soot may not be limited to polycyclic aromatic hydrocarbons but may extend as a significant process for a wider range of hydrophobic organic compounds. This suggestion was here tested in soot-column sorption experiments with a series of ortho- and non-ortho substituted polychlorinated biphenyls (PCBs), using diesel particulate matter (NIST standard reference material SRM-1650) as model soot sorbent. For congeners of similar hydrophobicity, considerably higher affinities toward the soot sorbent were observed for the non-ortho substituted PCBs. Mono- to tetra-ortho substituted PCBs exhibited log-based soot-water distribution coefficients (K(sc)) from 5.25 to 5.51 l/kg(sc) at solute concentrations corresponding to 1-13 microg/l. In contrast, biphenyl, mono- and dichloro- non-ortho substituted PCBs yielded logK(sc) values between 5.09 and 6.35 l/kg(sc). These results are 20-50, and 75-110 times higher, respectively, than the corresponding K(ow)-predicted K(oc) numbers. This strong interaction with soot, particularly of non-ortho substituted PCBs, may fundamentally affect their environmental distribution and bioavailable exposure.     

Analysis of some polyhalogenated organic pollutants in sediment and sewage sludge

A laminated sediment core collected in the southern part of the Baltic Proper was analysed for DDT compounds, polychlorinated biphenyls (PCB) including the coplanar congeners, polybrominated diphenyl ethers (PBDE) and polychlorinated naphthalenes (PCN). Two sewage sludge samples were also analysed for the same compounds.

The results of the sediment analyses indicate the presence of PCB, DDT and PBDE compounds in sediment layers dating from the 1950s and later. Neither coplanar PCB nor PCN were detected at any level of the sediment core. The PCB concentrations indicate a slight increase in levels during the last decades, while there were no changes in the levels of DDT compounds. In contrast, TeBDE levels increase 4- to 8-fold and one PeBDE congeners levels increase 10- to 20-fold. The results of sewage sludge analyses showed the concentration of the individual PBDE to be at about the same level as for the individual PCB congeners. The congener pattern in sludge samples indicates low-chlorinated products to be the main PCN source.     

A noval method of predicting soil organic carbon content normalized adsorption coefficients (Koc) of polybrominated biphenyls (PBBs)

By a soil column liquid chromatograph (SCLC) method, the soil organic carbon content normalized adsorption coefficients (K(oc)) of six polybrominated biphenyls (PBB15, PBB26, PBB31, PBB49, PBB103 and PBB153) are determined. Based on the similarity between the molecular structures of PBBs and PCBs, a simple linear predictive model has been developed with the correlation coefficient R=0.9812 and standard error SE=0.19. The logK(oc) values of any PBB congeners can be predicted by using the logK(oc) values of the corresponding PCBs according to this model. Using the published data for logK(oc) values of PCB congeners, logK(oc) values of all 209 PBB congeners have been for the first time predicted. Compared with the data obtained from the experiment, the results of prediction are very accurate.     

Uptake rates of alkylphenols, PAHs and carbazoles in semipermeable membrane devices (SPMDs) and polar organic chemical integrative samplers (POCIS)

Passive sampling devices provide a useful contribution to the monitoring of contaminants in the aquatic environment. However, calibration data needed for the calculation of water concentrations from sampler accumulations are restricted to a limited number of compound classes. Thus uptake of a range of alkylated phenols (AP), polycyclic aromatic hydrocarbons (PAH) and carbazoles was determined for semipermeable membrane devices (SPMDs) and polar organic chemical integrative samplers (POCIS) using a flow through exposure system. Sampling rates ranged from 0.02 to 0.26 l d(-1) for POCIS and 0.02 to 13.83 l d(-1) for SPMDs. Observed SPMD uptake was also compared to that predicted by an empirical model including the use of performance reference compounds (PRCs). Predicted sampling rates did not differ by more than a factor of 1.3 from experimental values for PAH, providing further evidence that the PRC approach can be successfully used to determine in situ sampling rates for these compounds. Experimental sampling rates for AP in SPMDs were, however, much lower than predicted. This discrepancy was too large to be explained by small uncertainties in the calibration system or in the calculations. Based on these data we conclude that while hydrophobic AP are accumulated by SPMDs their partitioning cannot be predicted from their logK(ow) using current methods. Due to this lower than expected uptake, sampling rates were only higher in SPMDs than POCIS in the range of logK(ow)>5.0. Simultaneous deployment of both sampler types allows the study of compounds with a broad range of physicochemical properties.