Assessing the efficacy of dredged materials from lake panasoffkee,florida: Implication to environment and agriculture part 1: Soil and environmental quality aspect

BACKGROUND, AIMS AND SCOPE: Dredged materials because of its variable but unique physical and chemical properties are often viewed by society and regulators as pollutants, but many have used these materials in coastal nourishment, land or wetland creation, construction materials, and for soil improvement as a soil amendment. Environmental impact assessment is an important pre-requisite to many dredging initiatives. The ability to reuse lake-dredge materials (LDM) for agricultural purposes is important because it reduces the need for off-shore disposal and provides an alternative to disposal of the materials in landfills. Additional research on disposal options of dredged materials are much needed to supply information on criteria testing and evaluation of the physical and chemical impacts of dredged materials at a disposal site, as well as information on many other aspects of dredging and dredged material disposal. While preliminary efforts are underway to provide information to establish criteria for land disposal, testing procedures for possible land disposal of contaminated sediments are still in their developing stage. The objective of this study (Part 1) was to quantify the effect of applied LDM from Lake Panasoffkee (LP), Florida on soil physico-chemical properties (soil quality) at the disposal site. This series of two papers aims at providing assessment of the efficacy of lake-dredged materials from LP especially its implication to environment (soil quality, Part 1) and agriculture (forage quality and pasture establishment, Part 2). METHODS: The experimental treatments that were evaluated consisted of different ratios of natural soil (NS) to LDM: LDM0 (100% NS:0% LDM); LDM25 (75% NS:25% LDM); LDM50 (50% NS:50% LDM); LDM75 (25% NS:75% LDM); and LDM100 (0% NS:100% LDM). Field layout was based on the principle of a completely randomized block design with four replications. The Mehlich 1 method (0.05 N HCl in 0.025 N H2SO4) was used for chemical extraction of soil. Soil P and other exchangeable cations (Ca, Mg, K, Al, and Fe) were analyzed using an Inductively Coupled Plasma (ICP) Spectroscopy. The effects of dredged materials addition on soil quality and compaction were analyzed statistically following the PROC ANOVA procedures. RESULTS AND DISCUSSION: Sediments that were dredged from LP have high CaCO3 content (82%) and when these materials were incorporated into existing topsoil they would have the same favorable effects as liming the field. Thus, sediments with high CaCO3 may improve the physical and chemical conditions of subtropical sandy pastures. The heavy and trace metal contents of LDM were below the probable effect levels (PEL) and threshold effect levels (TEL). Average values for Pb, Zn, As, Cu, Hg, Se, Cd, and Ni of 5.2 +/- 1.3, 7.0 +/- 0.6, 4.4 +/- 0.1, 8.7 +/- 1.2, 0.01 +/- 0.02, 0.02 +/- 0.02, 2.5 +/- 0.1, and 14.6 +/- 6.4 mg kg(-1), respectively, were below the TEL and the PEL. TEL represents the concentrations of sediment-associated contaminants that are considered to cause significant hazards to aquatic organisms, while, PEL represents the lower limit of the range of the contaminant concentrations that are usually or always associated with adverse biological effects. As such, the agricultural or livestock industry could utilize these LDM to produce forages. LDM should be regarded as a beneficial resource, as a part of the ecological system. Addition of LDM had significant (p < or = 0.001) effects on soil physico-chemical properties and soil quality. Compared with the control plots, the soils in plots amended with LDM exhibited: (1) lower degree of soil compaction; (2) an increase in soil pH, Ca, and Mg; (3) decrease in the levels of soil Mn, Cu, Fe, Zn, and Si; and (4) no significant change in the level of Na in the soil. Results have shown the favorable influence that LDM had on soil compaction. The treatment x year interaction effect was not significant, but the average soil compaction varied widely (p < or = 0.001) with LDM application. In 2002 and 2003, soil compaction of plots was lowered significantly as a result of LDM additions. The least compacted soils in 2002 and 2003 were observed from plots with LDM75 with mean soil compaction of 300 x 10(3) and 350 x 10(3) Pa, respectively. CONCLUSION: Beneficial uses of dredged materials from LP, Florida are both economical and environmental. Often these materials can be obtained at little or no cost to the farmers or landowners in south Florida. Environmentally, dredging of sediments that are rich in CaCO3 should restore the 19.4-sq km LP by removing natural sediments from the lake bottom to improve the fishery, water quality, and navigation of the lake. The bottom sediment materials from lakes, river, and navigational channels usually are composed of upland soil enriched with nutrients and organic matter. These materials should be regarded as a beneficial resource to be used productively and not to be discarded as spoil materials. RECOMMENDATION AND OUTLOOK: Land application of LDM from LP may not only provide substantial benefits that will enhance the environment, community, and society in south Florida, but also in other parts of the world especially those areas having tropical and subtropical climate with forage-based beef cattle pastures. The heavy and trace metal contents of LDM from LP were below the PEL and TEL. As such, the agricultural or livestock industry could utilize these LDM to produce forages (Part 2 of this study). LDM should be regarded as a beneficial resource, as a part of the ecological system. Further studies are still needed to determine whether the environmental and ecological implications of LDM application are satisfied over the longer term.     

Cumulative and Residual Effects of Repeated Sewage Sludge Applications: Forage Productivity and Soil Quality Implications in South Florida,USA (9 pp)

Background, Aim and Scope The cow-calf (Bos taurus) industry in subtropical United States and other parts of the world depends almost totally on grazed pastures. Establishment of complete, uniform stand of bahiagrass (BG) in a short time period is important economically. Failure to obtain a good BG stand early means increased encroachment of weeds and the loss of not only the initial investment costs, but production and its cash value. Forage production often requires significant inputs of lime, N fertilizer, and less frequently of P and K fertilizers. Domestic sewage sludge or biosolids, composted urban plant debris, waste lime, phosphogypsum, and dredged materials are examples of materials that can be used for fertilizing and liming pastures. Perennial grass can be a good choice for repeated applications of sewage sludge. Although sewage sludge supply some essential plant nutrients and provide soil property-enhancing organic matter, land-application programs still generate some concerns because of possible health and environmental risks involved. The objectives of this study were to evaluate the cumulative and residual effects of repeated applications of sewage sludge on (i) bahiagrass (BG, Paspalum notatum Flügge) production over years with (1997–2000) and without (2001–2002) sewage sludge applications during a 5-yr period, and (ii) on nutrients status of soil that received annual application of sewage sludge from 1997 to 2000 compared with test values of soils in 2002 (with no sewage sludge application) in South Florida.Methods The field experiment was conducted at the University of Florida Agricultural Research and Education Center, Ona, FL (27o26’N, 82o55’W) on a Pomona fine sandy soil. With the exception of the control, BG plots received annual sewage sludge and chemical fertilizers applications to supply 90 or 180 kg total N ha–1 yr–1 from 1997 to 2000. Land application of sewage sludge and fertilizer ceased in 2001 season. In early April 1998, 1999, and 2000, plots were mowed to 5-cm stubble and treated with the respective N source amendments. The experimental design was three randomized complete blocks with nine N-source treatments: ammonium nitrate (AMN), slurry biosolids of pH 7 (SBS7), slurry biosolids of pH 11 (SBS11), lime-stabilized cake biosolids (CBS), each applied to supply 90 or 180 kg N ha–1, and a nonfertilized control (Control). Application rates of sewage sludge were calculated based on the concentration of total solids in materials as determined by the American Public Health Association SM 2540G method and N in solids. The actual amount of sewage sludge applications was based on the amount required to supply 90 and 180 kg N ha–1. Sewage sludge materials were weighed in buckets and uniformly applied to respective BG plots. Soil samples were collected in June 1997, June 1999, and in June 2002 from 27 treatment plots. In 1997 and 1999, soil samples were collected using a steel bucket type auger from the 0- to 20-, 20- to 40-, 40- to 60-, and 60- to 100-cm soil depths. Forage was harvested on 139, 203, 257, and 307 day of year (DOY) in 1998; 125, 202, 257, and 286 DOY in 1999; 179, 209, 270, and 301 DOY in 2000; and on 156 and 230 DOY in 2002 (no sewage sludge applications) to determine the residual effect of applied sewage sludge following repeated application. Forage yield and soils data were analyzed using analysis of variance (PROC ANOVA) procedures with year and treatment as the main plot and sub-plot, respectively. As a result of significant year effects on forage yield, data were reanalyzed annually (i.e., 1998, 1999, 2000, and 2002).Results and Discussion All sewage sludges used in this study were of class B in terms of USEPA’s pathogens and pollutant concentration limit. Pathogen and chemical composition of the class B sewage sludge that were used in the study were all in compliance with the USEPA guidelines. The liquid sludge (SBS11) had the lowest fecal coliform counts (0.2 x 106 CFU kg–1) while the cake sewage sludge (CBS) had the greatest coliform counts of 178 x 106 CFU kg–1. The fecal coliform counts for SBS7 was about 33 x 106 CFU kg–1. Average soil test values in June 2002 exhibited: i) decrease in TIN (NO3-N + NH4-N), TP, K, Ca, Mg, Mn, and Fe; and ii) slight increase in Zn and Cu when compared with the June 1997 soil test results. The overall decrease in soil test values in 2002 might be associated with nutrient cycling and plant consumption. Although the average BG forage yield in 2002 (2.3 ± 0.7 Mg ha–1) was slightly lower than in 2000 (3.5 ± 1.2 Mg ha–1), yield differences in 2002 between the control (1.2 + 0.2 Mg ha–1) and treated plots (2.3 ± 0.5 Mg ha–1 to 3.3 ± 0.6 Mg ha–1) were indicative of a positive residual effect of applied sewage sludge. This study has shown that excessive build up of plant nutrients may not occur in beef cattle pastures that repeatedly received sewage sludge while favoring long-term increased forage yield of BG. All sources of N (sewage sludge and AMN) gave better forage production than the unfertilized control during years with sewage sludge application (1997–2000) and also during years with no sewage sludge application (2001–2002). The favorable residual effects of applied sewage sludge in 2002 may have had received additional boost from the amount of rainfall in the area.Conclusions Repeated applications of sewage sludge indicate no harmful effects on soil quality and forage quality. Our results support our hypothesis that repeated land application of sewage sludge to supply 90 and 180 kg N ha–1 would not increase soil sorption for nutrients and trace metals. Results have indicated that the concentrations of soil TIN and TP declined by almost 50% in plots with different nitrogen sources from June 1997 to June 2002 suggesting that enrichment of nitrogen and phosphorus is insignificant. The concentrations of soil nitrogen and phosphorus in 2002 following repeated application of sewage sludge were far below the contamination risk in the environment. The residual effect of these sewage sludge over the long term can be especially significant in many areas of Florida where only 50% of the 1 million ha of BG pastures are given inorganic nitrogen yearly.Recommendation and Outlook Successive land application of sewage sludge for at least three years followed by no sewage sludge application for at least two years may well be a good practice economically because it will boost and/or maintain sustainable forage productivity and at the same time minimize probable accumulation of nutrients, especially trace metals. Consecutive applications of sewage sludge may result in build up of some trace metals in some other states with initial high metallic content, but in this study, no detrimental effects on soil chemical properties were detected. The possibilities for economically sound application strategies are encouraging, but more and additional research is required to find optimal timing and rates that minimizes negative impacts on soil quality in particular or the environment in general. For proper utilization of sewage sludge, knowledge of the sewage sludges’ composition, the crop receiving it, are absolutely crucial, so that satisfactory types and rates are applied in an environmentally safe manner. There is still much to be learned from this study and this investigation needs to continue to determine whether the agricultural and ecological objectives are satisfied over the longer term.     

Experimental determination of efficiency of capping materials during consolidation of metal-contaminated dredged material

Capping has received considerable attention as a method to reduce contaminant transport from contaminated sediments and sub-aqueous disposed dredged materials. Consolidation of dredged material after capping can result in a substantial advection of pore water, into or through the capping layer. The effect of two different capping materials (crushed limestone and gneiss) on the transport of heavy metals and phosphorus during consolidation was studied with a novel experimental design. Capped dredged material was placed in a consolidation cell and pore water expelled during the consolidation was collected for chemical analysis. To support interpretation of the results from this test, interactions between the capping material and the dredged material were also studied in batch tests. The study revealed large differences in the capping efficiency (CE) between the two materials. Both materials were efficient caps for Fe and P (CE>99% with 2cm cap), while limestone also was efficient for Mn (CE>92% with 2cm cap). Contrary to what was expected, capping of dredged material with crushed gneiss increased the release of Ca, Mn, Co, Ni, Cd, and Cu, resulting in negative CE. The batch tests showed that leaching from the crushed gneiss was the source of the observed release of metals. The results also show that the high concentrations of heavy metals in the dredged material were immobilised, probably by sulphides. Protection against re-suspension and oxidation will therefore in many cases be the most important effect of the cap.     

Atmospheric flux of agricultural fumigants from raised-bed,plastic-mulch crop production systems

Atmospheric emission of methyl isothiocyanate (MITC), chloropicrin (CP), 1,3-dichloropropene (1,3-D), and dimethyl disulfide (DMDS) were measured in the field under fumigant application scenarios representative of raised bed–plastic-mulched crop production systems. For three fumigation sites located in Florida, cumulative emissions of 1,3-D, MITC and CP were less than 11%, 6% and 2%, respectively. For three fumigation sites in located in Georgia, cumulative emissions of MITC and CP were <13% and 12%, respectively while DMDS emissions varied from 37% to 95%. In the Florida sites, emission peak flux of CP occurred within the first 6 h after application. Peak emission of 1,3-D and MITC occurred between 100 and 144 h after application. In the Georgia sites where fumigated soil was covered by low density polyethylene (LDPE) plastic, emission peak flux of DMDS and MITC occurred between 12and 48 h after application. Key factors affecting atmospheric emissions were soil moisture, soil tilth and the resistance to fumigant diffusion of the plastic film used to cover soil following application. This study demonstrated reduced atmospheric emissions of agricultural fumigants under commercial production conditions when applied using good agricultural practices including soil water contents above field capacity, uniform soil tilth in the fumigation zone and the use of metalized or virtually impermeable films to further reduce fumigant emissions. The results of this study show a need for regional flux studies due to the various interactions of soil and climate with local agricultural land management practices.     

Effects of organic fertilizers on soil physicochemistry and on the yield and botanical composition of forage over 3 years

Organic wastes have been reported to reduce saturation of the exchange complex by Al in Al-rich acid soils. For 3 years, the main soil fertility properties were studied in plots sown with mixed pasture species. These plots were fertilized with cattle slurry, dairy sludge (DS), or granulated broiler litter (BL) in comparison with mineral fertilizer. Al saturation levels were low after the initial inorganic liming treatment (19.00-33.71%) but tended to rise under all treatments (21.09-61.37%) except BL (8.45-30.98%), which was also associated with the highest average soil pH and the highest average levels of exchangeable Ca2+, Mg2+, and K+. Treatment DS performed similarly to mineral fertilizer in most respects, but it led to greater available P levels. Under the dry conditions of the second and third years of the study, BL and DS treatments were associated with significantly greater forage yields than the other treatments. Under DS treatment, available P levels were too low to allow the maintenance of mixed pasture, clover being eliminated by the less P-dependent species.     

Yield and nutritive quality of sericea lespedeza (Lespedeza cuneata) and little bluestem (Schizachyrium scoparium) exposed to ground-level ozone

Sericea lespedeza (Lespedeza cuneata cv. Interstate 76) and little bluestem (Schizachyrium scoparium cv. Aldous) were raised from seed in a glasshouse, transplanted into 5.7-l pots and placed into open-top chambers (OTC) on 6 June 1999. Following a 7-day adjustment period, each of six OTCs (duplicate OTCs per treatment) was ventilated with either air that had been carbon-filtered (CF) to remove ambient ozone (O3); non-filtered (NF), representative of ambient air; or enriched to twice-ambient O3 concentration (2X). Primary-growth forage was harvested on days 7, 32, 46, 59 and 72 following the start of fumigation, and regrowth forage from the first primary-growth harvest was harvested on days 36, 54 and 72 following the start of fumigation. Dry matter (DM) yield of either forage species did not differ among treatments except in the final regrowth period when yield of sericea lespedeza was greater for the NF than 2X O3 treatment. In vitro DM digestibility (IVDMD) and concentrations of crude protein (CP), soluble phenolics (SP) and condensed tannins (CT) in primary-growth sericea lespedeza did not differ between treatments, but NF primary-growth forage had higher concentration of protein-precipitating tannins (PPT) than did 2X primary-growth forage. Concentrations of neutral detergent fiber (NDF), acid detergent fiber (ADF) and acid detergent lignin (ADL) were higher in NF and 2X than in CF primary-growth sericea lespedeza. Similarly, concentrations of NDF and ADL were higher, and IVDMD was lower for NF and 2X than for CF regrowth sericea lespedeza. Concentrations of ADF and ADL were lower, whereas IVDMD, in vitro NDF digestibility (IVNDFD) and concentrations of CP and SP were greater, in CF than in NF and 2X primary-growth little bluestem. Percentages IVDMD and IVNDFD and concentrations of CP and SP in NF primary-growth little bluestem were greater than those in forage exposed to 2X O3 treatment. No significant differences were observed among treatments in percentages IVDMD and IVNDFD, or concentrations of cell wall constituents or SP in little bluestem regrowth. Nutritive quality of little bluestem was decreased by < 2%, and that of sericea lespedeza by approximately 7% as a result of increased concentrations of cell wall constituents and decreased in vitro digestibility of NF and 2X compared with CF forages. Results indicate that existing and projected O3 levels can drive alterations in forage quality of select warm-season forages sufficient to have nutritional and economic implications for their utilization by ruminant herbivores.     

Emissions from soil fumigation in two raised bed production systems tarped with low permeability films

Raised beds are used to produce some high-value annual fruit and vegetable crops such as strawberry in California (CA) and tomato in Florida (FL), USA. Pre-plant soil fumigation is an important tool to control soil-borne pests in the raised beds. However, fumigant emissions have detrimental environmental consequences. Field trials were conducted to evaluate emissions of 1,3-dichloropropene (1,3-D) and chloropicrin (CP) in two different production systems with raised beds covered by different tarps. In the CA trial, InLine (60.8% 1,3-D and 33.3% CP) was drip-applied at 340 kg ha⁻¹ to 5 cm deep in the beds (30 cm high and 107 cm wide) tarped with polyethylene (PE) or virtually impermeable film (VIF). In the FL trial, carbonated Telone C35 (63.4% 1,3-D and 34.7% CP) was shank-applied at 151 kg ha⁻¹ to 20 cm deep in the beds (22 cm high and 76 cm wide) tarped with totally impermeable film (TIF). Emissions from tarped beds relative to furrows were contrary between the two trials. For the CA trial, the emission was 47% of applied 1,3-D and 27% of applied CP from PE tarped beds and 31% of applied 1,3-D and 15% of applied CP from VIF tarped beds, while that from uncovered furrows was <0.4% for both chemicals in both fields. In the FL trial, only 0.1% 1,3-D was emitted from the TIF tarped beds, but 27% was measured from the uncovered furrows. Factors contributing to the differences in emissions were chiefly raised-bed configuration, tarp permeability, fumigant application method, soil properties, soil water content, and fumigant carbonation. The results indicate that strategies for emission reduction must consider the differences in agronomic production systems. Modifying raised bed configuration and fumigant application technique in coarse textured soils with TIF tarping can maximize fumigation efficiency and emission reduction.     

Phytotoxicity of dredged sediment from urban canal as land application

Phytotoxicity of dredged sediment from Hangzhou section of the Grand Canal as land application was evaluated by pakchoi (Brassica chinensis L.) germination tests and pot experiments. Germination rates of pakchoi in the dredged sediment and in sediment-applied soils were both significantly higher than that in the soil controls, while the germination rate between the sediment-applied soils was no significant difference. In pot experiments, plant height and biomass were increased by the dredged sediment application rate in the rate of lower than 540 t ha(-1), but decreased when the application rate was over this rate. Concentrations of Zn and Cu in pakchoi were linearly increased with the increasing of the application rate of the dredged sediment. Both plant height and biomass of pakchoi in sediment-treated red soil were higher than that in sediment-treated paddy soil, regardless the application rate. The results suggest that plant biomass of pakchoi may be used as an indicator of the phytotoxicity of the dredged sediment. It also showed that red soil is more suitable to accept the dredged sediment than paddy soil, and 270 t ha(-1) is a safe application rate both in red soil and paddy soil.     

Development of regenerative dye impregnated mesoporous silica materials for assessing exposure to ammonia

The mesostructured materials MCM-41 and SBA-15 were studied as possible supports of bromocresol green (BG) dye impregnation for the ammonia gas detection because of their large surface area, high regenerative property, and high thermal stability. X-ray diffraction, transmission electron microscopy, scanning electron microscope, and N2 adsorption analysis were used to characterize the prepared materials. These materials could sense ammonia via visible color change from yellowish-orange to blue color. The color change process of the nanostructured materials was fully reversible during 10 cyclic tests. The results indicated that the ammonia absorption responses of the two nanostructured materials were both very sensitive, and high linear correlation and high precision were achieved. As the gaseous ammonia concentrations were 50 and 5 ppmv, the response times for the SBA-15/BG were only 1 and 5 min, respectively. Moreover the BG dye-impregnated SBA-15 was less affected by the variation in the relative humidity. It also had faster response for the detection of NH3, as well as lower manufacturing price as compared to that of the dye-impregnated MCM-41. Such feature enables SBA-15/BG to be a very promising material for the detection of ammonia gas.     

Phytostabilization of semiarid soils residually contaminated with trace elements using by-products: sustainability and risks

We investigated the efficiency of various by-products (sugarbeet lime, biosolid compost and leonardite), based on single or repeated applications to field plots, on the establishment of a vegetation cover compatible with a stabilization strategy on a multi-element (As, Cd, Cu, Pb and Zn) contaminated soil 4-6 years after initial amendment applications. Results indicate that the need for re-treatment is amendment- and element-dependent; in some cases, a single application may reduce trace element concentrations in above-ground biomass and enhance the establishment of a healthy vegetation cover. Amendment performance as evaluated by % cover, biomass and number of colonizing taxa differs; however, changes in plant community composition are not necessarily amendment-specific. Although the translocation of trace elements to the plant biotic compartment is greater in re-vegetated areas, overall loss of trace elements due to soil erosion and plant uptake is usually smaller compared to that in bare soil.     

Persistence, distribution, and emission of Telone C35 injected into a Florida sandy soil as affected by moisture, organic matter, and plastic film cover

With the phase-out of methyl bromide scheduled for 2005, alternative fumigants are being sought. This study of Telone C35, a mixture of (Z)- and (E)-1,3-dichloropropene (1,3-D) with chloropicirin (CP), focuses on its emissions, distribution, and persistence in Florida sandy soil in microplots with different soil-water and organic matter carbon (C) content with and without two different plastic film mulches. The addition of CP did not affect the physical behavior of the isomers of 1,3-D. Slower subsurface dispersion and longer residence time of the mixed fumigant occurred at higher water content. An increase in the percent organic carbon in the soil led to a more rapid decrease for chloropicirin than for 1,3-dichloropene isomers. The use of a virtually impermeable film (VIF) for soil cover provided a more even distribution and longer persistence under all the conditions studied in comparison to polyethylene (PE) film cover or no cover. The conditions of near field capacity water content, low organic matter, and a virtually impermeable film cover yielded optimum conditions for the distribution, emission control, and persistence of Telone C35 in a Florida sandy soil.     

Substance flows through the economy and environment of a region

Part I: Abstract  In the tradition of the study of materials flows through society, the Substance Flow Analysis (SFA) method is presented. SFA aims at providing the relevant information for a country’s overall management strategy regarding single substances or coherent groups of substances. This article is dedicated to the presentation of a threestep general framework for SFA-type studies, and elaborates on its first step the systems definition. Attention is given to the definition of the external and internal system boundaries, the categorization of the system’s elements, aspects of materials choice, time, and space, and how these depend on the aim of the conducted study. Moreover, a broader discussion is started on the need for standardization of materials flow studies in general. Part II: Abstract  In the tradition of the study of materials flows through society, the Substance Flow Analysis (SFA) method and its software tool SFINX are presented. SFA aims at providing the relevant information for a country’s overall management strategy regarding single substances or coherent groups of substances. Three modelling techniques and their possibilities and limitations are discussed: Bookkeeping, static modelling, and dynamic modelling. The computer program SFINX can be used for varoius purposes: (1) to obtain an overview of stocks and flows of a substance in, out and through a nation’s economy and environment for a specific year, (2) to trace the origins of specific pollution problems, and (3) to estimate the effectiveness of certain abatement measures. Each application has its own requirements with regard to data and modelling.     

Development of regenerative dye impregnated mesoporous silica materials for assessing exposure to ammonia

The mesostructured materials MCM-41 and SBA-15 were studied as possible supports of bromocresol green (BG) dye impregnation for the ammonia gas detection because of their large surface area, high regenerative property, and high thermal stability. X-ray diffraction, transmission electron microscopy, scanning electron microscope, and N₂ adsorption analysis were used to characterize the prepared materials. These materials could sense ammonia via visible color change from yellowish-orange to blue color. The color change process of the nanostructured materials was fully reversible during 10 cyclic tests. The results indicated that the ammonia absorption responses of the two nanostructured materials were both very sensitive, and high linear correlation and high precision were achieved. As the gaseous ammonia concentrations were 50 and 5 ppmv, the response times for the SBA-15/BG were only 1 and 5 min, respectively. Moreover, the BG dye-impregnated SBA-15 was less affected by the variation in the relative humidity. It also had faster response for the detection of NH₃, as well as lower manufacturing price as compared to that of the dye-impregnated MCM-41. Such feature enables SBA-15/BG to be a very promising material for the detection of ammonia gas.

Implications: The detector tube is a convenient ambient ammonia detection device. However, almost all the commercial detector tubes can be used once only, which not only increases the purchase cost but also produces lots of waste. In this study, we developed two sensing materials that are sensitive for repeated usage. The two mesoporous silica-based materials, MCM-41 and SBA-15, are impregnated by an organic dye of bromocresol green to induce color change behavior that can be easily observed by the naked eye, and it is concluded that dye-impregnated SBA-15/BG is a very promising material for the detection of ammonia gas.     

Persistence,Distribution, and Emission of Telone C35 Injected into a Florida Sandy Soil as Affected by Moisture,Organic Matter,and Plastic Film Cover

Abstract

With the phase-out of methyl bromide scheduled for 2005, alternative fumigants are being sought. This study of Telone C35, a mixture of (Z)- and (E)-1,3-dichloropropene (1,3-D) with chloropicirin (CP), focuses on its emissions, distribution, and persistence in Florida sandy soil in microplots with different soil–water and organic matter carbon (C) content with and without two different plastic film mulches. The addition of CP did not affect the physical behavior of the isomers of 1,3-D. Slower subsurface dispersion and longer residence time of the mixed fumigant occurred at higher water content. An increase in the percent organic carbon in the soil led to a more rapid decrease for chloropicirin than for 1,3-dichloropene isomers. The use of a virtually impermeable film (VIF) for soil cover provided a more even distribution and longer persistence under all the conditions studied in comparison to polyethylene (PE) film cover or no cover. The conditions of near field capacity water content, low organic matter, and a virtually impermeable film cover yielded optimum conditions for the distribution, emission control, and persistence of Telone C35 in a Florida sandy soil.     

Potential sensitivity of mires to drought,acidification and mobilisation of heavy metals: the sediment s/(Ca + Mg) ratio as diagnostic tool

In recent decades sulphate concentrations in the ground water in many parts of The Netherlands have increased dramatically resulting in increased production of iron-(di)sulphides in sediments of ecosystems fed by this water. A sediment survey was carried out to study the potential sensitivity of wetlands to drought and subsequent acidification as a consequence of iron-(di)sulphide oxidation. Dessication led to severe acidification and mobilisation of heavy metals when the sediment S/(Ca + Mg) ratio exceeded 2/ 3. A total of 47% of the investigated locations contained S/(Ca + Mg) ratios higher than 2/3 and in 100, 75 and 50% of the locations mobilisation of Zn, Cd and Ni exceeded the Dutch signal value for ground water. Consistent with the sediment survey, lime addition experiments confirmed that increasing the buffer capacity, down to a S/(Ca + Mg) ratio 2/3, led to a drastic inhibition of the acidification and heavy metal percolation from dredged sediments. The performance of the same processes under drained field conditions demonstrates the relevance of these processes during dry summers.     

Effect of plastic tarps over raised-beds and potassium thiosulfate in furrows on chloropicrin emissions from drip fumigated fields

Plastic tarps are commonly used in raised bed strawberry production to minimize emissions of preplant soil fumigants and are left in place throughout the growing season as part of the standard cultural practices. Soil amendments with chemicals such as thiosulfate (S2O3(2-)) can reduce fumigant emissions. A field study was conducted near Santa Maria, CA to determine the effects of low density polyethylene (LDPE) and virtually impermeable film (VIF) over raised-beds and applying potassium thiosulfate (KTS) in furrows on reducing chloropicrin (CP) emissions from a strawberry field. Four fields (or treatments) were tested with 224 kg ha(-1) CP drip-applied threecm under the soil surface. The CP flux from bed tops and furrows and gas-phase concentrations under the tarps were monitored for five d. The CP emission flux and concentration under tarp were highest immediately following application. Diurnal temperature change affected CP concentration and emission fluxes (higher values during the day and lower at night). Slightly higher CP cumulative emission occurred using LDPE tarp (19%) compared to VIF (17%). Normalized flux (CP emission flux from the beds divided by CP concentration under the tarp) being estimated from field measurement was slightly higher for LDPE than VIF indicating different tarp permeability in the field. Because of extremely low emissions from the furrows (<0.2% of total emission loss), KTS application to furrow treatments did not show further emission reductions than non-KTS treatments. This indicates that emission reduction should focus on the tarp above raised-beds when fumigant was drip-applied near bed-surface.     

Soil solution nitrogen and cations influenced by (NH4)2SO4 deposition in a coniferous forest

The effects of chronically enhanced (NH(4))(2)SO(4) deposition on ion concentrations in soil solution and ionic fluxes were investigated in a Picea abies plot at Grizedale forest, NW England. Soil cores closed at the base and containing a ceramic suction cup sampler were 'roofed' and watered every 2 weeks with bulk throughfall collected in the field. Treatments consisted of the inclusion of living roots from mature trees in the lysimeters and increasing (NH(4))(2)SO(4) deposition (NS treatment) to ambient + 75 kg N ha(-1) a(-1). Rainfall, throughfall and soil solutions were collected every 2 weeks during 18 months, and analysed for major cations and anions. NO(3)(-) fluxes significantly increased following NS treatment, and were balanced by increased Al(3+) losses. Increased SO(4)(2-) concentrations played a minor role in controlling soil solution cation concentrations. The soil exchange complex was dominated by Al and, during the experimental period, cores of all treatments 'switched' from Ca(2+) to Al(3+) leaching, leading to mean [Formula: see text] molar ratios in soil solution of NS treated cores of 0.24. The experiment confirmed that the most sensitive soils to acidification (through deposition or changing environmental conditions) are those with low base saturation, and with a pH in the lower Ca, or Al buffer ranges.     

The role of aqueous iron(II) and manganese(II) in sub-aqueous active barrier systems containing natural clinoptilolite

Increasing attention is being placed on capping as a relatively new option in managing both contaminated sediments and dredged materials, due to its economic and environmental benefits. Capping denotes the placement of a cover onto potentially hazardous sediments or dredged material dumps to inhibit the transfer of contaminants into the water column. Retention of divalent iron and manganese cations using sandy capping layers containing natural zeolites as a reactive additive (active barrier systems, ABS) is evaluated in this study. Three different natural zeolite (clinoptilolite) rocks, two from deposits in Australia and one from a North-American deposit, were investigated and compared with respect to their mineralogical, physical and chemical properties. In particular, results from batch and column experiments show that ABS based on these materials can efficiently demobilise iron and manganese from percolating, anoxic pore water by cation exchange under favourable conditions. The retention, however, may be reduced strongly where competitive exchange with divalent cations such as calcium prevails or where mobile colloidal pore water constituents such as clay minerals or humic substances bind fractions of the dissolved iron or manganese. Therefore, the potential of ABS as a means for in situ remediation has to be evaluated diligently with particular regard to the pore water composition of the sediment to be capped.     

Evaluating contamination of dredges and disposal criteria in Greek coastal areas

Sediments were collected from areas that were going to be dredged located at six small Greek ports, as well as from possible disposal areas. In order to assess the contamination level of dredged material, the samples were analysed for pH, organic matter, the metals Cd, Pb, Hg, Cr, Ni, Cu, Zn and major organic compounds (PAHs, PCBs). The sediments' quality was evaluated by two approaches: (i) by classifying each area according to two sets of Sediment Quality Guidelines (SQGs) and (ii) by calculating the contamination factors and degree for each area. The results showed that organic compounds were detected in trace amounts in 14% of the port samples belonging to the PAHs group. The characterization of the sediment samples was based on the metals' concentration showing that the majority of the areas to be dredged (80%) are classified as of medium-low contamination according to the SQGs. However, according to the contamination degree, only 30% of the areas are classified as of low contamination, while 40% as of moderate contamination and 30% of the areas as of considerable contamination. From the point of view of "no disturbance" of the ecosystem, decisions about dumping should be taken only after evaluating the material to be dredged. If the SQGs are exceeded, dumping must be forbidden. Otherwise, further evaluation is needed based on the comparison with the receiving area, i.e. by estimating the contamination degree. Dumping could be allowed if the contamination degree is found to be below moderate.     

Batch and column studies of the stabilization of toxic heavy metals in dredged marine sediments by hematite after bioremediation

The management of dredged sediments is an important issue in coastal regions where the marine sediments are highly polluted by metals and organic pollutants. In this paper, mineral-based amendments (hematite, zero-valent iron and zeolite) were used to stabilize metallic pollutants (As, Cd, Cu, Mo, Ni, Pb, and Zn) in a contaminated marine sediment sample. Mineral-based amendments were tested at three application rates (5 %, 10 %, and 15 %) in batch experiments in order to select the best amendment to perform column experiments. Batch tests have shown that hematite was the most efficient amendment to stabilize inorganic pollutants (As, Cd, Cu, Mo, Ni, Pb, and Zn) in the studied sediment. Based on batch tests, hematite was used at one application rate equal to 5 % to conduct column experiments. Column tests confirmed that hematite was able to decrease metal concentrations in leachates from stabilized sediment. The stabilization rates were particularly high for Cd (67 %), Mo (80 %), and Pb (90 %). The Microtox solid phase test showed that hematite could decrease significantly the toxicity of stabilized sediment. Based on batch and column experiments, it emerged that hematite could be a suitable adsorbent to stabilize metals in dredged marine sediment.