Carbon and nitrogen composition and stable isotope as potential indicators of source and fate of organic matter in the salt marsh of the Changjiang Estuary, China

Elemental (TOC, TN, C/N) and stable carbon and nitrogen isotopic (delta(13)C, delta(15)N) compositions were measured for surface sediments, three sediment vibrocores, plants, and suspended particulate matter (SPM) collected from salt marsh of the Changjiang Estuary. The purpose of this study is to characterize the sources of organic matter in sediments and to further elucidate the factors influencing the isotope signature in the salt marsh. Our results indicate that organic matter preserved in the sediments is predominantly controlled by the particulate organic matter in the Changjiang Estuary. The in situ contribution of marsh plants carbon to sediment organic matter is clearest in the high marsh, where the low delta(13)C of the plants (-28.1 per thousand) is reflected by a sediment delta(13)C (-24.7 per thousand) lower than values found for the low marsh and bare flat sediments (-23.4 per thousand and -23.0 per thousand, respectively). The effect of grain size on the spatial difference of isotope composition in the marsh sediments is insignificant, based on the observation that similar isotope values are found in different size particles, both for delta(13)C and delta(15)N. Nutrient utilization by plant assimilation, however, shows great impact on the surface sediment delta(15)N composition, due to the isotope fractionation. With extensive plant coverage and the consequent low surface water nitrate concentration, delta(15)N values of the high marsh surface sediments show (15)N enrichment.     

Stable hydrogen,carbon and chlorine isotope measurements of selected chlorinated organic solvents

Stable hydrogen isotopes of two chlorinated solvents, trichloroethylene (TCE) and 1,1,1-trichloroethane (TCA), provided by five different manufacturers, were determined and compared to their carbon and chlorine isotopic signatures. The isotope ratio for delta2H of different TCEs ranged between +466.9 per thousand and +681.9 per thousand, for delta13C between -31.57 per thousand and -27.37 per thousand, and for delta37Cl between -3.19 per thousand and +3.90 per thousand. In the case of the TCAs, the isotope ratio for delta2H ranged between -23.1 per thousand and +15.1 per thousand, for delta13C between -27.39 per thousand and -25.84 per thousand, and for delta37Cl between -3.54 per thousand and +1.39 per thousand. As well, a column experiment was carried out to dechlorinate tetrachloroethylene (PCE) to TCE using iron. The dechlorination products have completely different hydrogen isotope ratios than the manufactured TCEs. Compared to the positive values of delta2H in manufactured TCEs (between +466.9 per thousand and +681.9 per thousand), the dechlorinated products had a very depleted delta2H (less than -300 per thousand). This finding has strong implications for distinguishing dechlorination products (PCE to TCE) from manufactured TCE. In addition, the results of this study show the potential of combining 2H/1H analyses with 13C/12C and 37Cl/35Cl for isotopic fingerprinting applications in organic contaminant hydrogeology.     

Identification of methyl chloride-emitting plants and atmospheric measurements on a subtropical island

A survey of methyl chloride (CH3Cl)-emitting plants was performed at a subtropical island in Japan (Iriomote Island). Among the 187 species of tropical/subtropical plants investigated, 33 species from a variety of families were identified as CH3Cl-emitting plants. The strongest emitters were Osmunda banksiifolia, Cibotium balometz, Angiopteris palmiformis, Vitex rotundifolia, Vitex trifolia, and Excoecaria agalloch, each with CH3Cl emission rates exceeding 1microg (gdrywt)(-1)h(-1). The first three species are ferns, and the last three are halophilous plants. Based on our results, the character of CH3Cl emission is likely to be shared at the genus level but not always at the family level. The atmospheric CH3Cl distribution measured on Iriomote Island showed significant enhancement in forested sites (up to 2750 ppt) and a higher concentration on the downwind shore than on the upwind shore. As previously reported, our findings provide strong evidence for the high emission of CH3Cl from tropical/subtropical forests.     

Analysis of anaerobic BTX biodegradation in a subarctic aquifer using isotopes and benzylsuccinates

In situ biodegradation of benzene, toluene, and xylenes in a petroleum hydrocarbon contaminated aquifer near Fairbanks, Alaska was assessed using carbon and hydrogen compound specific isotope analysis (CSIA) of benzene and toluene and analysis of signature metabolites for toluene (benzylsuccinate) and xylenes (methylbenzylsuccinates). Carbon and hydrogen isotope ratios of benzene were between -25.9 per thousand and -26.8 per thousand for delta13C and -119 per thousand and -136 per thousand for delta2H, suggesting that biodegradation of benzene is unlikely at this site. However, biodegradation of both xylenes and toluene were documented in this subarctic aquifer. Biodegradation of xylenes was indicated by the presence of methylbenzylsuccinates with concentrations of 17-50 microg/L in three wells. Anaerobic toluene biodegradation was also indicated by benzylsuccinate concentrations of 10-49 microg/L in the three wells with the highest toluene concentrations (1500-5000 microg/L toluene). Since benzylsuccinate typically accounts for a very small fraction of the toluene present in groundwater (generally <1 mol%), the signature metabolite approach works best at higher toluene concentrations when it is not constrained by detection limits. In wells with lower toluene concentrations (410-640 microg/L), carbon and hydrogen isotopic values were enriched by up to approximately 2 per thousand for delta13C and approximately 70 per thousand for delta2H. This evidence of isotopic fractionation verifies the effects of biodegradation in these low concentration wells where metabolites may already be below detection limits. The combined use of signature metabolite and CSIA data is particularly valuable given the challenge of verifying biodegradation in subarctic environments where degradation rates are typically much slower than in temperate environments.     

Changes in the grassland-forest boundary at Ta-Ta-Chia long term ecological research (LTER) site detected by stable isotope ratios of soil organic matter

The carbon isotope analysis [delta13C values] of organic samples can be a useful research in ecological studies because delta13C values are indicative of the plant source. This study investigated the changes in plant communities along the grassland-forest boundary in the alpine forest at Ta-Ta-Chia long term ecological research (LTER) site in central Taiwan using carbon isotope data. The aim of this study was focused on the forest fire affected the change of vegetation community. Four pedons from grassland dominated by Miscanthus transmorrisonensis (pedons 1 and 2), transition zone by Tsuga and Yushania nittakeyamensis (pedon 3), and forest zone by Tsuga and nittakeyamensis (pedon 4) were examined. Soil organic matter (SOM) delta13C values in the upper soil horizon were similar to delta13C values of the overlaying vegetation types. This indicates that the boundary between these plant communities remained the same in the past decades. The delta13C values of the grassland SOM ranged from -19.4 per thousand to -24.1 per thousand, showing decrease with soil depth. This suggests that C4 plants (transmorrisonensis) have replaced C3 plants of Tsuga and nittakeyamensis. The delta13C values of the Tsuga forest area (pedon 4) range from -27.0 per thousand to -23.5 per thousand and showed only slight change with soil depth, implying that C3 plants have remained the major species in the forest.     

Hydrochemical and isotopic effects associated with petroleum fuel biodegradation pathways in a chalk aquifer

Hydrochemical data, compound specific carbon isotope analysis and isotopic enrichment trends in dissolved hydrocarbons and residual electron acceptors have been used to deduce BTEX and MTBE degradation pathways in a fractured chalk aquifer. BTEX compounds are mineralised sequentially within specific redox environments, with changes in electron acceptor utilisation being defined by the exhaustion of specific BTEX components. A zone of oxygen and nitrate exhaustion extends approximately 100 m downstream from the plume source, with residual sulphate, toluene, ethylbenzene and xylene. Within this zone complete removal of the TEX components occurs by bacterial sulphate reduction, with sulphur and oxygen isotopic enrichment of residual sulphate (epsilon(s) = -14.4 per thousand to -16.0 per thousand). Towards the plume margins and at greater distance along the plume flow path nitrate concentrations increase with delta15N values of up to +40 per thousand indicating extensive denitrification. Benzene and MTBE persist into the denitrification zone, with carbon isotope enrichment of benzene indicating biodegradation along the flow path. A Rayleigh kinetic isotope enrichment model for 13C-enrichment of residual benzene gives an apparent epsilon value of -0.66 per thousand. MTBE shows no significant isotopic enrichment (delta13C = -29.3 per thousand to -30.7 per thousand) and is isotopically similar to a refinery sample (delta13C = -30.1 per thousand). No significant isotopic variation in dissolved MTBE implies that either the magnitude of any biodegradation-induced isotopic fractionation is small, or that relatively little degradation has taken place in the presence of BTEX hydrocarbons. It is possible, however, that MTBE degradation occurs under aerobic conditions in the absence of BTEX since no groundwater samples were taken with co-existing MTBE and oxygen. Low benzene delta13C values are correlated with high sulphate delta34S, indicating that little benzene degradation has occurred in the sulphate reduction zone. Benzene degradation may be associated with denitrification since increased benzene delta13C is associated with increased delta15N in residual nitrate. Re-supply of electron acceptors by diffusion from the matrix into fractures and dispersive mixing is an important constraint on degradation rates and natural attenuation capacity in this dual-porosity aquifer.     

Organic and inorganic components of aerosols over the central Himalayas: winter and summer variations in stable carbon and nitrogen isotopic composition

The aerosol samples were collected from a high elevation mountain site, Nainital, in India (1958 m asl) during September 2006 to June 2007 and were analyzed for water-soluble inorganic species, total carbon, nitrogen, and their isotopic composition (δ¹³C and δ¹⁵N, respectively). The chemical and isotopic composition of aerosols revealed significant anthropogenic influence over this remote free-troposphere site. The amount of total carbon and nitrogen and their isotopic composition suggest a considerable contribution of biomass burning to the aerosols during winter. On the other hand, fossil fuel combustion sources are found to be dominant during summer. The carbon aerosol in winter is characterized by greater isotope ratios (av. ?24.0?‰), mostly originated from biomass burning of C₄ plants. On the contrary, the aerosols in summer showed smaller δ¹³C values (?26.0?‰), indicating that they are originated from vascular plants (mostly of C₃ plants). The secondary ions (i.e., SO₄ ^2?, NH₄ ⁺, and NO₃ ^?) were abundant due to the atmospheric reactions during long-range transport in both seasons. The water-soluble organic and inorganic compositions revealed that they are aged in winter but comparatively fresh in summer. This study validates that the pollutants generated from far distant sources could reach high altitudes over the Himalayan region under favorable meteorological conditions.     

Measurement of 13C/12C of chloroacetic acids by gas chromatography/combustion/isotope ratio mass spectrometry

This paper describes a novel analytical methodology using gas chromatography/combustion/isotope ratio mass spectrometry (GC/C/IRMS) to measure the 13C/12C ratios of chloroacetic acids (CAAs). CAAs are a major class of environmental pollutants that are widely distributed throughout the world, often at relatively high concentrations, and are of concern due to their toxic effects, particularly on plants. The 13C/12C of CAA reagents was measured by IRMS subsequent to offline combustion. Aqueous solutions of these CAAs were derivatized to the corresponding methyl chloroacetates (MCAAs) with acidic methanol with a known isotopic composition, extracted into pentane, and analyzed by GC/C/IRMS. Measured 13C/12C ratios of derivatized MCAAs were in agreement with calculated values within 1 per thousand for monochloroacetic acid and trichloroacetic acid and within 2 per thousand for dichloroacetic acid, suggesting that methylation and other analytical methodology steps do not isotopically fractionate derivatized MCAAs. 13C/12C ratios of reagent CAAs from different sources had varying isotopic signatures suggesting differences in source carbon and/or production methods. Our results underscore the potential of stable isotopes to serve as tracers of environmental sources of CAAs.     

Sulfur and carbon cycling in a flue gas desulfurization sludge disposal site

Products of a power plant flue gas desulfurization scrubber are discharged into a pond as sludge consisting of calcite (initial delta13C 3.2-3.8 per thousand), gypsum (initial delta34S 7.6-8.6 per thousand), and aqueous solution. Reducing conditions exist below a boundary that appears to move vertically as a function of changes in pond water level. Under reducing conditions, bacteria partially reduce aqueous sulfate to low-delta34S sulfide, consuming organic carbon and generating low-delta13C bicarbonate. Under oxidizing conditions, sulfide is converted to sulfate, leading to calcite dissolution, gypsum precipitation, and isotopic re-equilibration of remaining calcite with dissolved bicarbonate near the pond surface. The gypsum has delta34S near 6 per thousand, and calcite has delta13C as low as -1.7 per thousand; the changes from initial values correspond to predictions based on isotopic balance and reaction stoichiometry. The pond largely contains the products of bacterial reduction. After the pond is abandoned, these products may adversely affect attempts to revegetate the site. Future bacterial reduction may be best controlled by dewatering and limiting the supply of organic matter in percolating surface water.     

Lichen response to changes in atmospheric sulphur: isotopic evidence.

In June of 1997, several thalli of the lichen species Alectoria sarmentosa were transplanted from a remote area (Bonavista) to an urban area (St John's) on the island of Newfoundland, Canada. The purpose was to assess the response of these epiphytic lichens to a change in the level of atmospheric sulphur pollution as measured by sulphur concentration and isotopic composition. The dominant source of atmospheric sulphur in the Bonavista area is sea spray, therefore, lichens growing there have relatively high sulphur isotopic compositions and low concentrations (approximately + 15 per/thousand, 250 ppm). Atmospheric sulphur in the St John's area is dominated by anthropogenic sources, primarily oil burning. Lichens in this area have lower isotopic compositions and higher concentrations (approximately + 6 per thousand, 500 ppm). The transplanted lichens were monitored monthly for a period of 1 year. In all experiments the sulphur isotopic composition decreased and the sulphur concentration increased linearly. It is estimated that, within 18 months, transplanted A. sarmentosa would be indistinguishable from the same species naturally growing in the transplant site, both in terms of sulphur concentration and isotopic composition.     

Partitioning microbial respiration between jet fuel and native organic matter in an organic-rich long time-contaminated aquifer

The relative importance of jet fuel biodegradation relative to the respiration of natural organic matter in a contaminated organic-rich aquifer underlying a fire training area at Tyndall Air Force Base, Florida, USA was determined with isotopic measurements. Thirteen wells were sampled and analyzed for BTX (benzene, toluene, xylene), dissolved inorganic carbon (DIC) and CH4 concentrations, and delta13C and 14C of DIC. Results range from non-detectable to 3790 ppb, 1.4-24 mM, 0.2-776 microM, +5.8 per thousand to -22 per thousand, and from 52 to 99 pmc, respectively. Residual fuel was confined to two center wells underlying the fire training area. DIC and CH4 concentrations were elevated down-gradient of the contamination, but also at sites that were not in the apparent flow path of the contaminated groundwater. DIC exhibited greatest delta13C enrichment at highest DIC and CH4 concentrations indicating that CH4 production was an important respiration mode. Radiocarbon-depleted DIC was observed at sites with high hydrocarbon concentrations and down-gradient of the site. The results indicate that while natural attenuation was not rapidly reducing the quantity of free product overlying the aquifer at the site of contamination, it was at least constraining its flow away from the spill site. Apparently under the conditions of this study, BTX was degraded as rapidly as it was dissolved.     

Oxidation of ketone groups in transported biomass burning aerosol from the 2008 Northern California Lightning Series fires

Submicron particles were collected from June to September 2008 in La Jolla, California to investigate the composition and sources of atmospheric aerosol in an anthropogenically-influenced coastal site. Factor analysis of aerosol mass spectrometry (AMS) and Fourier transform infrared (FTIR) spectroscopy measurements revealed that the two largest sources of submicron organic mass (OM) at the sampling site were (1) fossil fuel combustion associated with ship and diesel truck emissions near the ports of Los Angeles and Long Beach and (2) aged smoke from large wildfires burning in central and northern California. During non-fire periods, fossil fuel combustion contributed up to 95% of FTIR OM, correlated to sulfur, and consisted mostly of alkane (86%) and carboxylic acid groups (9%). During fire periods, biomass burning contributed up to 74% of FTIR OM, consisted mostly of alkane (48%), ketone (25%), and carboxylic acid groups (17%), and correlated to AMS-derived factors resembling brush fire smoke, wood smoldering and flaming particles, and biogenic secondary organic aerosol. The two AMS-derived biomass burning factors were identified as oxygenated and hydrocarbon biomass burning aerosol on the basis of spectral similarities to smoldering and flaming smoke particles, respectively. In addition, the ratio of oxygenated to hydrocarbon biomass burning OM shows a clear diurnal trend with an afternoon peak, consistent with photochemical oxidation. Back trajectory analysis indicates that 2–4-day old forest fire emissions include substantial ketone groups, which have both lower O/C and lower m/z 44/OM fraction than carboxylic acid groups. Air masses with more than 4-day old emissions have higher carboxylic acid/ketone group ratios, showing that atmospheric processing of these ketone-containing organic aerosol particles results in increased m/z 44 and O/C. These observations may provide functionally-specific evidence for the type of chemical processing that is responsible for biomass burning particle composition in the atmosphere.     

Invariant chlorine isotopic signatures during microbial PCB reductive dechlorination

In order to develop more robust insight into the natural attenuation of polychlorinated biphenyls (PCBs), the chlorine isotopic composition of residual 2,3,4,5-tetrachlorobiphenyl (2,3,4,5-CB) was monitored as it underwent microbial reductive dechlorination to 2,3,5-trichlorobiphenyl (2,3,5-CB) in laboratory cultures. Reverse-phase high performance liquid chromatography (HPLC) was employed to isolate the former compound from the experimental matrix for delta37Cl measurement. No detectable isotopic fractionation was observed over the 90 day incubation with sterile control, standard, and inoculated samples all exhibiting delta37Cl values with a range of approximately 0.5 per thousand. These results show that this type of biological activity can be discriminated from other transformations by the absence of a measurable isotope effect during microbial reductive dechlorination. The utility of HPLC isolation for compound-specific delta37Cl analyses of environmentally relevant species is also demonstrated.     

Quantifying MTBE biodegradation in the Vandenberg Air Force Base ethanol release study using stable carbon isotopes

Compound-specific isotope analysis (CSIA) was used to assess biodegradation of MTBE and TBA during an ethanol release study at Vandenberg Air Force Base. Two continuous side-by-side field releases were conducted within a preexisting MTBE plume to form two lanes. The first involved the continuous injection of site groundwater amended with benzene, toluene and o-xylene ("No ethanol lane"), while the other involved the continuous injection of site groundwater amended with benzene, toluene and o-xylene and ethanol ("With ethanol lane"). The delta(13)C of MTBE for all wells in the "No ethanol lane" remained constant during the experiment with a mean value of -31.3 +/- 0.5 per thousand (n=40), suggesting the absence of any substantial MTBE biodegradation in this lane. In contrast, substantial enrichment in (13)C of MTBE by 40.6 per thousand, was measured in the "With ethanol lane", consistent with the effects of biodegradation. A substantial amount of TBA (up to 1200 microg/L) was produced by the biodegradation of MTBE in the "With ethanol lane". The mean value of delta(13)C for TBA in groundwater samples in the "With ethanol lane" was -26.0 +/- 1.0 per thousand (n=32). Uniform delta(13)C TBA values through space and time in this lane suggest that substantial anaerobic biodegradation of TBA did not occur during the experiment. Using the reported range in isotopic enrichment factors for MTBE of -9.2 per thousand to -15.6 per thousand, and values of delta(13)C of MTBE in groundwater samples, MTBE first-order biodegradation rates in the "With ethanol lane" were 12.0 to 20.3 year(-1) (n=18). The isotope-derived rate constants are in good agreement with the previously published rate constant of 16.8 year(-1) calculated using contaminant mass-discharge for the "With ethanol lane".     

Effect of source variability and transport processes on carbon isotope ratios of TCE and PCE in two sandy aquifers

Chlorinated ethenes often migrate over extended distances in aquifers and may originate from different sources. The aim of this study was to determine whether stable carbon isotope ratios remain constant during dissolution and transport of chlorinated ethenes and whether the ratios can be used to link plumes to their sources. Detailed depth-discrete delineation of the carbon isotope ratio in a tetrachloroethene (PCE) plume and in a trichloroethene (TCE) plume was done along cross-sections orthogonal to groundwater flow in two sandy aquifers in the Province of Ontario, Canada. At the TCE site, TCE concentrations up to solubility were measured in one high concentration zone close to the bottom of the aquifer from where dense non-aqueous phase liquid (DNAPL) was collected. A laboratory experiment using the DNAPL indicated that only very small carbon isotope fractionation occurs during dissolution of TCE (0.26 per thousand), which is consistent with field observations. At most sampling points, the delta(13)C of dissolved TCE was similar to that of the DNAPL except for a few sampling points at the bottom of the aquifer close to the underlying aquitard. At these points, a (13)C enrichment of up to 2.4 per thousand was observed, which was likely due to biodegradation and possibly preferential diffusion of TCE with (12)C into the aquitard. In contrast to the TCE site, several distinct zones of high concentration were observed at the PCE site and from zones to zone, the delta(13)C values varied substantially from -24.3 per thousand to -33.6 per thousand. Comparison of the delta(13)C values in the high concentration zones made it possible to divide the plume in the three different domains, each probably representing a different episode and location of DNAPL release. The three different zones could still be distinguished 220 m from the DNAPL sources. This demonstrates that carbon isotope ratios can be used to differentiate between different zones in chlorinated ethene plumes and to link plume zones to their sources. In addition, subtle variations in delta(13)C at plume fringes provided insight into mechanisms of plume spreading in transverse vertical direction. These variations were identified because of the high-resolution provided by the monitoring network.     

Remote sensing-based estimates of annual and seasonal emissions from crop residue burning in the contiguous United States

Crop residue burning is an extensive agricultural practice in the contiguous United States (CONUS). This analysis presents the results of a remote sensing-based study of crop residue burning emissions in the CONUS for the time period 2003-2007 for the atmospheric species of carbon dioxide (CO2), methane (CH4), carbon monoxide (CO), nitrogen dioxide (NO2, sulfur dioxide (SO2), PM2.5 (particulate matter [PM] < or = 2.5 microm in aerodynamic diameter), and PM10 (PM < or = 10 microm in aerodynamic diameter). Cropland burned area and associated crop types were derived from Moderate Resolution Imaging Spectroradiometer (MODIS) products. Emission factors, fuel load, and combustion completeness estimates were derived from the scientific literature, governmental reports, and expert knowledge. Emissions were calculated using the bottom-up approach in which emissions are the product of burned area, fuel load, and combustion completeness for each specific crop type. On average, annual crop residue burning in the CONUS emitted 6.1 Tg of CO2, 8.9 Gg of CH4, 232.4 Gg of CO, 10.6 Gg of NO2, 4.4 Gg of SO2, 20.9 Gg of PM2.5, and 28.5 Gg of PM10. These emissions remained fairly consistent, with an average interannual variability of crop residue burning emissions of +/- 10%. The states with the highest emissions were Arkansas, California, Florida, Idaho, Texas, and Washington. Most emissions were clustered in the southeastern United States, the Great Plains, and the Pacific Northwest. Air quality and carbon emissions were concentrated in the spring, summer, and fall, with an exception because of winter harvesting of sugarcane in Florida, Louisiana, and Texas. Sugarcane, wheat, and rice residues accounted for approximately 70% of all crop residue burning and associated emissions. Estimates of CO and CH4 from agricultural waste burning by the U.S. Environmental Protection Agency were 73 and 78% higher than the CO and CH4 emission estimates from this analysis, respectively. This analysis also showed that crop residue burning emissions are a minor source of CH4 emissions (< 1%) compared with the CH4 emissions from other agricultural sources, specifically enteric fermentation, manure management, and rice cultivation.     

Assessing in situ mineralization of recalcitrant organic compounds in vadose zone sediments using delta13C and 14C measurements

Few techniques exist to measure the biodegradation of recalcitrant organic compounds such as chlorinated hydrocarbons (CHC) in situ, yet predictions of biodegradation rates are needed for assessing monitored natural attenuation. Traditional techniques measuring O2, CO2, or chemical concentrations (in situ respiration, metabolite and soil air monitoring) may not be sufficiently sensitive to estimate biodegradation rates for these compounds. This study combined isotopic measurements (14C and delta13C of CO2 and delta13C of CHCs) in conjunction with traditional methods to assess in situ biodegradation of perchloroethylene (PCE) and its metabolites in PCE-contaminated vadose zone sediments. CHC, ethene, ethane, methane, O2, and CO2 concentrations were measured over 56 days using gas chromatography (GC). delta13C of PCE, trichloroethylene (TCE) and cis-1,2-dichloroethylene (DCE), delta13C and 14C of vadose zone CO2 and sediment organic matter, and delta13C, 14C, and deltaD of methane were measured using a GC-isotope ratio mass spectrometer or accelerator mass spectrometer. PCE metabolites accounted for 0.2% to 18% of CHC concentration suggesting limited reductive dechlorination. Metabolites TCE and DCE were significantly enriched in (13)C with respect to PCE indicating metabolite biodegradation. Average delta13C-CO2 in source area wells (-23.5 per thousand) was significantly lower compared to background wells (-18.4 per thousand) indicating CHC mineralization. Calculated CHC mineralization rates were 0.003 to 0.01 mg DCE/kg soil/day based on lower 14C values of CO2 in the contaminated wells (63% to 107% modern carbon (pMC)) relative to the control well (117 pMC). Approximately 74% of the methane was calculated to be derived from in situ CHC biodegradation based on the 14C measurement of methane (29 pMC). 14C-CO2 analyses was a sensitive measurement for quantifying in situ recalcitrant organic compound mineralization in vadose zone sediments for which limited methodological tools exist.     

Stable isotope determination in wild and farmed gilthead sea bream (Sparus aurata) tissues from the western Mediterranean

Stable isotopes of carbon and nitrogen (delta(13)C and delta(15)N) have been determined in wild and farmed gilthead sea bream (Sparus aurata) samples of white and red muscle, liver, gills and gonads. First, delta(13)C and delta(15)N values were determined in samples with and without lipid removal to check the possible effect of lipid content on the stable isotope values of the different tissues studied. Differences were found for delta(13)C in all tissues studied apart from white muscle of wild fish, the tissue with the lowest lipid content. For delta(15)N values no differences were found in wild fish tissues. Liver from farmed fish showed lower delta(15)N value after lipid removing. Further conclusions were based on results obtained from lipid-free samples. delta(13)C of cultured fish tissues showed a mean depletion of 2.9+/-0.4 per thousand compared to wild specimens, suggesting different sources of carbon in the diet, probably due to the feed used during sea-cage culture. Cultured gilthead sea bream tissues were significantly more enriched in nitrogen than wild specimens by an average of 1.5+/-0.2 per thousand in white muscle, indicating a slight increase in the trophic level. Determination of stable isotope signatures of gilthead sea bream tissues allows clear discrimination between wild and cultured sea bream, and characterisation of differences in diet and feeding conditions in any tissue studied.     

A comparison of blue crab and bivalve delta15N tissue enrichment in two North Carolina estuaries

Stable isotope analyses (delta(15)N) were used to examine invertebrate tissue enrichment in two North Carolina estuaries with differing amounts of nutrient loading. Bivalves collected from a nutrient sensitive estuary yielded a significant difference in mean nitrogen isotopic composition of tissue (10.4 per thousand+/-0.82; N=66) compared to bivalves collected from a less nutrient sensitive estuary (6.4 per thousand+/-0.63; N=45). Similarly, blue crabs from nutrient sensitive sites had a nitrogen isotopic composition of 11.4 per thousand (+/-1.3, N=77), which was significantly different (P<0.001) than the tissue of less nutrient sensitive blue crabs (9.6 per thousand+/-0.6; N=77). The results showed that an inverse relationship exists between invertebrate tissue enrichment and indicators of water quality across estuarine sites. This study suggests that a relationship may exist between nutrient sources and subsequent energy transfer to estuarine consumers in two North Carolina estuaries.     

Atmospheric polycyclic aromatic hydrocarbons and isomer ratios as tracers of biomass burning emissions in Northern India

Emission from large-scale post-harvest agricultural-waste burning (paddy-residue burning during October–November and wheat-residue burning in April–May) is a conspicuous feature in northern India. The poor and open burning of agricultural residue result in massive emission of carbonaceous aerosols and organic pollutants to the atmosphere. In this context, concentrations of atmospheric polycyclic aromatic hydrocarbons (PAHs) and their isomer ratios have been studied for a 2-year period from a source region (Patiala: 30.2°N; 76.3°E) of two distinct biomass burning emissions. The concentrations of 4—6 ring PAHs are considerably higher compared to 2–3 ring PAHs in the ambient particulate matter (PM_2.5). The crossplots of PAH isomer ratios, fluoranthene?/?(fluoranthene?+?pyrene) and indeno[1,2,3-cd]pyrene/(indeno[1,2,3-cd]pyrene?+?benzo[g,h,i]perylene) for two biomass burning emissions, exhibit distinctly different source characteristics compared to those for fossil-fuel combustion sources in south and south-east Asia. The PAH isomer ratios studied from different geographical locations in northern India also exhibit similar characteristics on the crossplot, suggesting their usefulness as diagnostic tracers of biomass burning emissions.