Cancer risk from gaseous carbonyl compounds in indoor environment generated from household coal combustion in Xuanwei,China

Airborne carbonyls were characterized from emitted indoor coal combustion. Samples were collected in Xuanwei (Yunnan Province), a region in China with a high rate of lung cancer. Eleven of 19 types of samples (58%) demonstrated formaldehyde concentrations higher than the World Health Organization exposure limit (a 30-min average of 100 μg m^?3). Different positive significant correlations between glyoxal/methylglyoxal and formaldehyde/acetaldehyde concentrations were observed, suggesting possible different characteristics in emissions between two pairs of carbonyl compounds. A sample in the highest inhalation risk shows 29.2 times higher risk than the lowest sample, suggesting different coal sampling locations could contribute to the variation of inhalation risk. Inhabitants in Xuanwei also tend to spend more time cooking and more days per year indoors than the national average. The calculated cancer risk ranged from 2.2–63 × 10^?5, which shows 13 types of samples at high-risk level. Cumulative effect in combination with different carbonyls could have contributed to the additive actual inhalation cancer risk. There is a need to explicitly address the health effects of environmentally relevant doses, considering life-long exposure in indoor dwellings.     

Elemental and radioactivity analysis of rocks and soils of some selected sites in southwestern Nigeria

The elemental and radioactivity analyses of rock and soil samples from some selected sites in southwestern Nigeria have been done. Measurements of the elemental compositions and activity concentrations of ²³⁸U, ²³²Th, and ⁴⁰K were carried out using nuclear activation analysis technique and gamma spectrometry with high purity germanium detector, respectively. The results obtained provide reference data, allowing observation of possible future changes due to future radiological contamination. The activity concentrations of the natural radionuclides measured in the rocks were higher than those of the soils. The mean concentration of the major and minor elements in the rock and soil samples followed the order Al > Ca > Na > K > Mg > Fe > Ti and Mn > Ba > V > As > Cr > Ni > Zn > Cu, respectively. The radiological hazard and pollution risks associated with the natural radionuclides and heavy metals in the samples were assessed. The results obtained for the annual effective dose equivalent (AEDE), internal hazard, external hazard, and representative gamma indices were lower than their respective maximum permissible limit of 1 mSv y^?1 for AEDE and 1 for internal hazard, external hazard, and representative gamma indices as recommended by the International Commission on Radiological Protection (ICRP). The results of the geo-accumulation index, enrichment factor, and the pollution load index indicate that the soils of the study area are uncontaminated with the heavy metals measured except Ado-Ekiti, Ikere, and Igbara-Odo soils which are moderately contaminated with Arsenic (As).     

Androgens,oestrogens, and progesterone concentrations in wastewater purification processes measured with capillary electrophoresis

A novel analytical-scale concept to improve reliability of detection and analysis of natural and processed wastewater samples from a purification plant was developed. A sequential sample clean-up system of polymer-based octadecyl and silane-based quaternary amine sorbents were used for concentrating human based steroid hormones and their metabolites and detecting them by UV absorption with capillary electrophoresis (CE). The water samples were collected from influent and effluent processes of the water purification plant in Helsinki, Finland.The CE methods were partial-filling micellar electrokinetic chromatography and capillary zone electrophoresis. The analysis times and method concentration levels were optimized with eight steroids at the range of 0.5–10 mg/L. Since in CE the detectable quantities were higher than the existing amounts in the process waters, the real samples needed matrix removal combined with steroid enrichment. After 20,000-fold concentration testosterone-glucoside, androstenedione, progesterone, and estradiol-glucoside could be determined in the process water samples. The amounts of individual steroids in influent and effluent waters were 0–429 and 0–207 ng/L, respectively. Correspondently, their total amounts were 735 and 212 ng/L with excellent in day and inter-day repeatability. The RSD values were less than 1, 9.7, and 19% in repeated analyses, calculated from 60 analyses during 24 h, and from 130 analyses during 15 months, respectively. The steroid removal in purification process was 65% on average. The solid particles separated in three steps during the water clean-up concept contained 9.8–45 ng/g steroids in combined dry precipitates.     

Coal fly ash as adsorptive material for treatment of a real textile effluent: operating parameters and treatment efficiency

The experimental results performed after the application of one single-stage treatment by sorption onto coal fly ash are evaluated in order to decolorize a real textile effluent of a private company specializing in manufacturing of cotton fabrics (i.e., sorption performance applied for a real textile effluent collected after the fabric dyeing, rinsing, and final finishing steps). The experiments are focused on studying the effect of initial textile effluent pH, adsorbent dose, temperature and adsorption time, considered as operating parameters of sorption process for high pollutant removals (e.g., organic pollutants as dyes, phenols, polymeric, and degradation compounds), and decoloration. The results indicate high values of decoloration degree (55.42–83.00 %) and COD removal (44.44–61.11 %) when it is worked at pH ≤2 with coal ash dose of 12–40 g/L, temperature higher than 20–25 °C, and continuous static operating regime (with an initial agitation step of 3–5 min). The treated textile effluent fulfills the quality demand, and is recyclable, inside reused or discharged after a stage of neutralization (standard pH of 6.5–8.5 for all textile effluent discharges). Also, the final effluent is able to follow the common path to the central biological treatment plant (i.e., a centralized treatment plant for all companies acting in the industrial site area with mechanical–biological steps for wastewater treatment) or may be directly discharged in the nearly watercourse.     

Characterization of top phase oil obtained from co-pyrolysis of sewage sludge and poplar sawdust

To research the impact of adding sawdust on top phase oil, a sewage sludge and poplar sawdust co-pyrolysis experiment was performed in a fixed bed. Gas chromatography (GC)/mass spectrometry (MS) was used to analyze the component distribution of top phase oil. Higher heating value, viscosity, water content, and pH of the top phase oil product were determined. The highest top phase oil yield (5.13 wt%) was obtained from the mixture containing 15 % poplar sawdust, while the highest oil yield (16.51 wt%) was obtained from 20 % poplar sawdust. Top phase oil collected from the 15 % mixture also has the largest amount of aliphatics and the highest higher heating value (28.6 MJ/kg). Possible reaction pathways were proposed to explain the increase in the types of phenols present in the top phase oil as the proportion of poplar sawdust used in the mixture increased. It can be concluded that synergetic reactions occurred during co-pyrolysis of sewage sludge and poplar sawdust. The results indicate that the high ash content of the sewage sludge may be responsible for the characteristic change in the top phase oil obtained from the mixtures containing different proportions of sewage sludge and poplar sawdust. Consequently, co-pyrolysis of the mixture containing 15 % poplar sawdust can increase the yield and the higher heating value of top phase oil.     

典型危险废物的工程力学特性

掌握填埋废物的工程力学特性是确保危险废物填埋堆体稳定性的重要前提条件,因此,针对6种典型危险废物的工程力学特性开展了调查研究.研究结果表明,污泥类危险废物的含水率和有机质含量远高于非污泥类危险废物,而前者的比重则显著低于后者.污泥类危险废物的渗透系数相对较小,比污染土壤和飞灰炉渣混合物的渗透系数小1个数量级,比滤池填料的渗透系数小2个数量级.不同危险废物的无侧限抗压强度排序为:飞灰炉渣混合物(314.3 kPa)和滤池填料(278.9 kPa)＞污染土壤(124.9 kPa)＞杭州氧气厂污泥(68.6 kPa)、锌铬污泥(71.4 kPa)、油泥(58.4 kPa).不同危险废物的粘聚力排序为:飞灰炉渣混合物(40.8 kPa)、滤池填料(31.1 kPa)＞污染土壤(20.9 kPa)＞杭州氧气厂污泥(1.94kPa)、锌铬污泥(3.10 kPa)、油泥(1.81 kPa).此外,不同危险废物的内摩擦角差异相对较小,其变化范围在18.8°～35.0°之间.综合分析可知,飞灰炉渣混合物和滤池填料的工程力学特性较好,而污泥类危险废物的工程力学特性则较差.     

Concentrations and source apportionment of PM10 and associated elemental and ionic species in a lignite-burning power generation area of southern Greece

Ambient concentrations of PM₁₀ and associated elemental and ionic species were measured over the cold and the warm months of 2010 at an urban and two rural sites located in the lignite-fired power generation area of Megalopolis in Peloponnese, southern Greece. The PM₁₀ concentrations at the urban site (44.2?±?33.6 μg m^?3) were significantly higher than those at the rural sites (23.7?±?20.4 and 22.7?±?26.9 μg m^?3). Source apportionment of PM₁₀ and associated components was accomplished by an advanced computational procedure, the robotic chemical mass balance model (RCMB), using chemical profiles for a variety of local fugitive dust sources (power plant fly ash, flue gas desulfurization wet ash, feeding lignite, infertile material from the opencast mines, paved and unpaved road dusts, soil), which were resuspended and sampled through a PM₁₀ inlet onto filters and then chemically analyzed, as well as of other common sources such as vehicular traffic, residential oil combustion, biomass burning, uncontrolled waste burning, marine aerosol, and secondary aerosol formation. Geological dusts (road/soil dust) were found to be major PM₁₀ contributors in both the cold and warm periods of the year, with average annual contribution of 32.6 % at the urban site vs. 22.0 and 29.0 % at the rural sites. Secondary aerosol also appeared to be a significant source, contributing 22.1 % at the urban site in comparison to 30.6 and 28.7 % at the rural sites. At all sites, the contribution of biomass burning was most significant in winter (28.2 % at the urban site vs. 14.6 and 24.6 % at the rural sites), whereas vehicular exhaust contribution appeared to be important mostly in the summer (21.9 % at the urban site vs. 11.5 and 10.5 % at the rural sites). The highest contribution of fly ash (33.2 %) was found at the rural site located to the north of the power plants during wintertime, when winds are favorable. In the warm period, the highest contribution of fly ash was found at the rural site located to the south of the power plants, although it was less important (7.2 %). Moderate contributions of fly ash were found at the urban site (5.4 and 2.7 % in the cold and the warm period, respectively). Finally, the mine field was identified as a minor PM₁₀ source, occasionally contributing with lignite dust and/or deposited wet ash dust under dry summer conditions, with the summertime contributions ranging between 3.1 and 11.0 % among the three sites. The non-parametric bootstrapped potential source contribution function analysis was further applied to localize the regions of sources apportioned by the RCMB. For the majority of sources, source regions appeared as being located within short distances from the sampling sites (within the Peloponnesse Peninsula). More distant Greek areas of the NNE sector also appeared to be source regions for traffic emissions and secondary calcium sulfate dust.     

Capability of the natural microbial community in a river water ecosystem to degrade the drug naproxen

The present work aims at evaluating the ability of the River Tiber natural microbial community to degrade naproxen in water samples collected downstream from a wastewater treatment plant. For this purpose, different water microcosms were set up (microbiologically active vs sterile ones) and treated with naproxen (100 μg/L) alone or in the co-presence of gemfibrozil in order to evaluate if the co-presence of the latter had an influence on naproxen degradation. The experiment was performed in the autumn and was compared with the same experimental set performed in spring of the same year to highlight if seasonal differences in the river water influenced the naproxen degradation. Pharmaceutical concentrations and microbial analysis (total cell number, viability, and microbial community composition) were performed at different times in the degradation experiments. The overall results show that the natural microbial community in the river water had a key role in the naproxen degradation. In fact, although there was a transient negative effect on the natural microbial community in all the experiments (3 h after adding the pharmaceutical), the latter was able to degrade naproxen within about 40 days. On the contrary, no decrease in the pharmaceutical concentration was observed in the sterile river water. Moreover, the co-presence of the two drugs lengthened the naproxen lag phase. As regards the natural microbial community composition detected by Fluorescence in situ Hybridization, Alpha and Gamma-Proteobacteria increased when the pharmaceutical halved, suggesting their role in the degradation. This study shows that with the concentration studied, naproxen was degraded by the natural microbial populations collected from a river chronically contaminated by this pharmaceutical.     

Dispersal and persistence of genetically modified oilseed rape around Japanese harbors

Background, aim, and scope

The possibility of gene transfer from genetically modified oilseed rape (OSR) to its cultivated or wild relatives is of concern since its commercial cultivation, because of its potential weediness and impact on the environment. Introgression of modified genes can affect conservation of agricultural crops, because there are many cultivars and wild Brassicaceae that may cross with genetically modified OSR (Brassica napus) in Japan. Japan imports more than 2 million tons of OSR a year from Canada and other countries. Since volunteers of GM OSR were found around harbors in 2004, a lot of feral GM OSR was discovered in Japan. To consider the way how to keep domestic Brassicaceae from GM contamination, we surveyed and analyzed the dispersal and persistence of GM OSR around Japanese harbors. We present the cause and abundance of GM OSR in Japan by this paper.

Materials and methods

Survey of the feral OSR was performed several times a year at different seasons when domestic OSR either grows or does not around port areas. Detection of herbicide tolerance in feral B. napus was done by test papers that cross react with the modified gene product. Two kinds of herbicide tolerance (glyphosate and glufosinate) were tested.

Results

The feral B. napus were discovered around all 13 harbors that import rapeseeds from foreign countries. Genetically modified, herbicide-tolerant OSR were frequently found in the surveyed populations. Two kinds of herbicide-tolerant OSR (glyphosate- and glufosinate-tolerant) were discovered in a natural condition 40 km from port to an oil factory where 60,000 tons of OSR seed are processed a year. The cause of voluntary growth of OSR is seed spillage during transportation by trucks from harbors to oil factories and other processing facilities. Some of the feral OSR growing along the roadsides of transport paths exhibited perennial growth spilling their seeds around the places. Alteration of the generation of feral GM OSR was discovered for the first time in Japan as a result of this study. We studied the yearly change of feral OSR abundances focusing on Yokkaichi port over the 4 years since 2004. The rate of GM OSR increases year to year, and reaches nearly 90% in 2008.

Discussion

The possibility and consequences of gene transfer from the genetically modified OSR to domestic species (B. rapa and B. juncea) were discussed in relation to impact on domestic agriculture and on environments. Evolutional meaning of the gene transfer was also discussed with respect to the gene construct of GM OSR. This study shows the importance of another pathway of modified gene transfer to non-GM relative species by seed transportation in addition to pollen transfer from commercial cultivation of genetically modified OSR.

Conclusions and recommendations

We identified unintended dispersal and persistence of GM OSR around Japanese harbors that import OSR from Canada and other countries. Both glyphosate- and glufosinate-tolerant feral B. napus were discovered. The cause of volunteer OSR is spillage of the seeds during transportation by truck to oil factory. The feral GM OSR sometimes showed perennial growth in Japanese phonological conditions which are not observed for domestic Brassicaceae. In addition, we confirmed an alteration of generations by feral GM OSR in Japan. The possibility of cross pollination and GM gene introgression to domestic varieties can occur in these environments. To improve the situation, each responsible organization, company, administration, or government should establish measures how to stop the dispersal and persistence of GM OSR in nature. Also, the GM plant developers are responsible for revising this situation.     

A comparative study of removal of fluoride from contaminated water using shale collected from different coal mines in India

Low-cost water defluoridation technique is one of the most important issues throughout the world. In the present study, shale, a coal mine waste, is employed as novel and low-cost adsorbent to abate fluoride from simulated solution. Shale samples were collected from Mahabir colliery (MBS) and Sonepur Bazari colliery (SBS) of Raniganj coalfield in West Bengal, India, and used to remove fluoride. To increase the adsorption efficiency, shale samples were heat activated at a higher temperature and samples obtained at 550 °C are denoted as heat-activated Mahabir colliery shale (HAMBS₅₅₀) and heat-activated Sonepur Bazari colliery shale (HASBS₅₅₀), respectively. To prove the fluoride adsorption onto different shale samples and ascertain its mechanism, natural shale samples, heat-activated shale samples, and their fluoride-loaded forms were characterized using scanning electron microscopy, energy dispersive X-ray analysis, X-ray diffraction study, and Fourier transform infrared spectroscopy. The effect of different parameters such as pH, adsorbent dose, size of particles, and initial concentration of fluoride was investigated during fluoride removal in a batch contactor. Lower pH shows better adsorption in batch study, but it is acidic in nature and not suitable for direct consumption. However, increase of pH of the solution from 3.2 to 6.8 and 7.2 during fluoride removal process with HAMBS₅₅₀ and HASBS₅₅₀, respectively, confirms the applicability of the treated water for domestic purposes. HAMBS₅₅₀ and HASBS₅₅₀ show maximum removal of 88.3 and 88.5 %, respectively, at initial fluoride concentration of 10 mg/L, pH 3, and adsorbent dose of 70 g/L.     

Determination of polychlorinated dibenzo-p-dioxins and dibenzo-furans in solid residues from wood combustion by HRGC/HRMS

PCDD/PCDF were determined in solid samples from wood combustion. The samples included grate ashes, bottom ashes, furnace ashes as well as fly and cyclone ashes. The solid waste samples were classified into bottom and fly ash from native wood and bottom and fly ash from waste wood. For each of the four classes concentration distribution patterns from individual congeners, the sums of PCDD/PCDF and the international toxicity equivalents (I-TEQ) values are given. The I-TEQ levels of fly ash from waste wood burning can be approximately up to two thousand times higher than the values from fly ashes of natural wood. The I-TEQ levels in bottom ashes from waste wood combustion systems are as low as the corresponding ashes from the combustion of native wood. Grate ash samples from waste wood combustion systems with low carbon burnout show high levels of PCDD/PCDF.     

Estimation and characterization of unintentionally produced persistent organic pollutant emission from converter steelmaking processes

Unintentionally produced persistent organic pollutants (UP-POPs) including polychlorinated dibenzo-p-dioxins, and dibenzofurans (PCDD/Fs), polychlorinated biphenyls (PCBs), and polychlorinated naphthalenes (PCNs) were characterized and quantified in stack gas and fly ash from the second ventilation systems in five typical converters in five different steelmaking plants. The 2378-substituted PCDD/Fs (2378-PCDD/Fs) and dioxin-like PCB (dl-PCBs) toxic equivalents (TEQs) were 1.84–10.3 pg WHO-TEQ Nm^?3 in the stack gas and 5.59–87.6 pg WHO-TEQ g^?1 in the fly ash, and the PCN TEQs were 0.06–0.56 pg TEQ Nm^?3 in the stack gas and 0.03–0.08 pg TEQ g^?1 in the fly ash. The concentrations of UP-POPs in the present study were generally lower than those in other metallurgical processes, such as electric arc furnaces, iron ore sintering, and secondary metallurgical processes. Adding scrap metal might increase UP-POP emissions, indicating that raw material composition was a key influence on emissions. HxCDF, HpCDF, OCDF, HpCDD, and OCDD were the dominant PCDD/Fs in the stack gas and fly ash. TeCB and PeCB were dominant in the stack gas, but HxCB provided more to the total PCB concentrations in the fly ash. The lower chlorinated PCNs were dominant in all of the samples. The 2378-PCDD/F, dl-PCB, and PCN emission factors in stack gases from the steelmaking converter processes (per ton of steel produced) were 1.88–2.89, 0.14–0.76_, and 229–759 μg t^?1, respectively.     

Sublethal effects of epoxiconazole on the earthworm <Emphasis Type="Italic">Aporrectodea icterica</Emphasis>

Earthworms play a key role in agroecosystem soil processes. This study aims to assess the effects of different doses of a commercial formulation of epoxiconazole (Opus®), a persistent and widely used fungicide, on the earthworm Aporrectodea icterica. A laboratory study was conducted in a natural soil in order to measure effects of Opus® on earthworm mortality, uptake, weight gain, enzymatic activities (catalase and glutathione-S-transferase), and energy resources (lipids and glycogens). The estimated LC50 was 45.5 mg kg^?1, or 268 times the recommended dose. Weight gains were 28, 19, and 13 % of the initial weight after 28 days of exposure in the control and D1 and D10 (1 and 10 times the recommended dose) treatments, respectively. No difference was observed for catalase activity between the three treatments, at 7, 14, or 28 days. The glutathion-S-transferase (GST) activity was two times as high in D1 as in D0 at 14 days. At 28 days, glycogen concentration was lower in D10 than in the D1 treatment. This study highlighted moderate sublethal effects of the commercial formulation Opus® for earthworms. Considering that these effects were observed on a species found in cultivated fields, even at recommended rates, much more attention should be paid to this pesticide.     

Utilization of nSiO2, fly ash, and nSiO2/fly ash composite for the remediation of triphenyltin (TPT) from contaminated seawater

The removal of triphenyltin chloride from contaminated simulated seawater with adsorption method was discussed. The adsorbents used are fly ash, nSiO₂, and nSiO₂/fly ash composite. The results showed that the adsorption of the adsorbents increases with increase in the adsorbent dose, contact time, pH, stirring speed, initial TPT concentration, and decreased with increase in temperature. The adsorption fitted well with the Freundlich isotherm, showing that the adsorbent and TPT combined with function groups and the adsorption kinetics followed the pseudo-second-order kinetic model. The thermodynamic parameters were also evaluated. Optimal conditions for the adsorption of TPT from simulated seawater were applied to TPT removal from natural seawater. A higher removal efficiency of TPT (>99 %) was obtained for the nSiO₂/fly ash composite but not for fly ash and nSiO₂.     

Properties of biochars from conventional and alternative feedstocks and their suitability for metal immobilization in industrial soil

In contaminated soils, excessive concentrations of metals and their high mobility pose a serious environmental risk. A suitable soil amendment can minimize the negative effect of metals in soil. This study investigated the effect of different biochars on metal (Cu, Pb, Zn) immobilization in industrial soil. Biochars produced at 300 and 600 °C from conventional (MS, maize silage; WP, wooden pellets) and alternative (SC, sewage sludge compost; DR, digestate residue) feedstocks were used as soil amendments at a dosage of 10 % (w/w). The type of feedstock and pyrolysis temperature affected the properties of the biochars and their ability to immobilize metal in soil. Compared to production at 300 °C, all biochars produced at 600 °C had higher pH (6.2–10.7), content of ash (7.2–69.0 %) and fixed carbon (21.1–56.7 %), but lower content of volatile matter (9.7–37.2 %). All biochars except DR biochar had lower dissolved organic carbon (DOC) content (1.4–2.3 g C/L) when made at 600 °C. Only MS and SC biochars had higher cation exchange capacity (25.2 and 44.7 cmol/kg, respectively) after charring at 600 °C. All biochars contained low concentrations of Cd, Cu, Ni, Pb and Zn; Cd was volatilized to the greatest extent during pyrolysis. Based on FTIR analysis and molar ratios of H/C and O/C, biochars had a greater degree of carbonization and aromaticity after charring at 600 °C. The efficiency of the biochars in metal immobilization depended mainly on their pH, ash content, and concentration of DOC. SC and DR biochars were more effective for Cu and Zn immobilization than MS and WP biochars, which makes them attractive options for large-scale soil amendment.     

Radiometric and environmental impacts of mill tailings at experimental plant processing unit,Allouga, Egypt

Abstract

Uranium mining and ore processing are known to be harmful to the environment and human health if the waste generated is not managed properly. The aim of the present study is to determine the radiological indices in the mill tailings and review the possible attempts to utilize and minimize its hazardous effect. The activity concentrations of natural radionuclides, ²³⁸U, ²³²Th, ²²⁶Ra, and ⁴⁰K have been measured by gamma spectrometry using HP-Ge detector. The average activity concentrations of ²³⁸U, ²³²Th, ²²⁶Ra, and ⁴⁰K in the tailings wastes were 2071.8, 59.92, 6921.262, and 445. 57?Bq/kg respectively which are higher than the international average limit. The ranges of hazard indices such as Radium equivalent activity (Ra_eq), external hazard index (H_ex), internal hazard index (H_in), γ-radiation hazard index I_γ, Dose rate (nGy/h) and annual effective dose equivalent (AED), were estimated. Uraniumm isotopic ratios in the ore –material and mill tailing samples indicate migration out of radionuclides to the surrounding environment causing contamination and many dangerous diseases. Fairly, all investigated tailing waste samples do not satisfy the universal standards, the studied wastes relatively still have high uranium contents and need reprocessing.     

Estimation methods and monitoring network issues in the quantitative estimation of land-based COD and TN loads entering the sea: a case study in Qingdao City,China

At present, the monitoring network of China cannot provide sufficient data to estimate land-based pollutant loads that enter the sea, and estimation methods are imprecisely used. In this study, the selection of monitoring stations, monitoring frequency, and pollutant load estimation methods was studied in Qingdao City, a typical coastal city in China, taken as an example. Land-based pollutant loads from Qingdao were estimated, and load distribution, density, and composition were analyzed to identify the key pollution source regions (SRs) that need to be monitored and controlled. Results show that the administrative land area of Qingdao can be divided into 25 sea-sink source regions (SSRs). A total of 14 more rivers and 62 industrial enterprises should be monitored to determine the comprehensive pollutant loads of the city. Furthermore, the monitoring frequency of rivers should not be less than three times/year; a monitoring frequency of five or more times is preferable. The findings on pollutant load estimation with the use of different estimation methods substantially vary; estimation results with the use of ratio-based methods were 10 and 22 % higher than those with the use of monitoring-based methods in terms of chemical oxygen demand (COD) and total nitrogen (TN), respectively. None-point sources contributed the majority of the pollutant loads at about 70 % of the total COD and 60 % of the total TN.     

A comparison between sludge ash and fly ash on the improvement in soft soil

In this study, the strength of soft cohesive subgrade soil was improved by applying sewage sludge ash as a soil stabilizer. Test results obtained were compared with earlier tests conducted on soil samples treated with fly ash. Five different proportions of sludge ash and fly ash were mixed with soft cohesive soil, and tests such as pH value, compaction, California bearing ratio, unconfined compressive strength (UCS), and triaxial compression were performed to understand soil strength improvement because of the addition of both ashes. Results indicate that pH values increase with extending curing age for soil with sludge ash added. The UCS of sludge ash/soil were 1.4-2 times better than untreated soil. However, compressive strength of sludge ash/soil was 20-30 kPa less than fly ash/soil. The bearing capacities for both fly ash/soil and sludge ash/soil were five to six times and four times, respectively, higher than the original capacity. Moreover, the cohesive parameter of shear strength rose with increased amounts of either ash added. Friction angle, however, decreased with increased amounts of either ash. Consequently, results show that sewage sludge ash can potentially replace fly ash in the improvement of the soft cohesive soil.     

Effect of dietary supplementation of essential oils mixture on performance,eggshell quality,hatchability, and mineral excretion in quail breeders

The main aim of this study was to investigate the effect of six different levels (0, 50, 100, 200, 400, and 600 mg/kg) of phytogenic feed additive containing a mixture essential oils from thyme, black cumin, fennel, anise and rosemary on performance, eggshell quality, reproductive traits, and mineral excretion in quail breeders. In this trial, a total of 60 male and 120 female quails, 91 days old, were randomly distributed in six experimental groups. During the 60-day experiment period, birds were fed with six treatment diets. Performances, eggshell qualities, hatchability, and mineral excretion data were evaluated at the end of the experiment. Results showed that the different dietary levels of essential oil mixture had no significant effect on performance parameters, damaged eggs, eggshell weight, fertility, hatchability of fertile eggs, hatchability of set eggs, and lead and boron excretion. On the other hand, 50 mg/kg supplementation of essential oil mixture (EOM) significantly improved egg-breaking strength and eggshell thickness, and ash, calcium, phosphorus, magnesium, manganese, zinc, and cadmium excretion was significantly depressed in quail breeders supplemented with the two higher doses (400 or 600 mg/kg) of EOM. These results concluded that supplementing diets with EOM improved egg-breaking strength and decreased excretion of minerals in breeder quails.     

Effective oil removal from water by magnetically driven superhydrophobic and oleophilic magnetic titania nanotubes

Development of efficient techniques to combat the harmful effects of oil spill is an emerging field, where fabrication of new sorbents for selective removal of oil has become a hot topic for environmental scientists. The present study reports the preparation of superhydrophobic/oleophilic magnetic titania nanotubes via a facile hydrothermal method, followed by the treatment with octadecylamine, as potential magnetically driven sorbent for selective removal of oil from water surface. The magnetic nature (superparamagnetism at 300 K) of the nanotubes enabled magnetic removal of the oil-sorbed material from water surface. Wettability test of the material depicted a static water contact angle of 166 ± 1°, indicating its superhydrophobic character. Oil uptake experiments and contact angle measurements revealed its superoleophilicity with maximum oil sorption capacity >1.5 g/g for a variety of oils. In addition to the ease of magnetic removal, the nanotubes possess sufficient buoyancy, high selectivity, and quick rate of oil uptake and is more than five times reusable.