Determination of time-dependent partition coefficients for several pesticides using diffusion theory

Diffusion-retarded partitioning of pesticides with aggregated soils results in a time-dependent partition coefficient (Kd') which is different at equilibrium from the partition coefficient derived from conventional 24-h batch studies (Kd) measured on dispersed soil. An experiment was undertaken to determine the importance of Kd' for the prediction of pesticide concentrations in solutions bathing artificial soil aggregates and to determine whether diffusion theory could accurately predict the concentrations. Two clay soils were mixed with polyacrylamide to create artificial aggregates of 0.8, 1.4 and 1.7 cm diameter when dry. After saturation, the aggregates were immersed in solutions containing isoproturon or a mixture of isoproturon, chlorotoluron and triasulfuron. The decline with time of the pesticide concentrations in the bathing solution was monitored and the results were compared with predictions from a diffusion-based model. The effective diffusion coefficients of the compounds were obtained by either fitting the non-linear diffusion model to the data (D(ef)) or by independent calculations based on the properties of the compounds and of the aggregates (D(ec)). The diffusion model was able to predict the temporal variation in pesticide concentrations in the bathing solution reasonably well whether D(ef) or D(ec) values were used. However, equilibrium concentrations in solution were sometimes overestimated due to increased sorption with time at the particle scale. Overall, the ratio between D(ef) and D(ec) ranged from 0.23 to 0.95 which was a reasonable variation when compared to the range of aggregate sizes used in the experiments and of the Kd values of the compounds.     

A lysimeter experiment to investigate temporal changes in the availability of pesticide residues for leaching

Leaching of three pesticides (isoproturon, chlorotoluron and triasulfuron) and a tracer (bromide) were determined in four contrasting soils ranging in texture from sandy loam to clay. The compounds were applied to undisturbed columns of soil and four columns for each soil were randomly selected and leached with 24-mm equivalent of water at prescribed time intervals (3, 9, 24, 37 and 57 d after application). A rapid decline in leached loads of isoproturon and chlorotoluron as time from application to irrigation increased was observed in all soils. In contrast, triasulfuron and bromide loads only decreased rapidly in the clay soil. Bromide losses decreased with decreasing clay contents of the soil and therefore with a decrease in structural development. Magnitudes of pesticide losses varied from soil to soil, depending on structural development and the organic carbon content. Pesticide degradation experiments on disturbed and undisturbed soil samples showed that the rapid decline of leached loads with time was faster than could be explained by degradation alone. Five physico-chemical processes are put forward to explain the different patterns of pesticide leached loads observed in the soils: (1) relative extent of preferential flow, (2) sorption capacity of the compounds to the different soils, (3) extent of degradation of the compounds in the soil, (4) variation in sorption kinetics between compounds associated with pesticide diffusion into soil aggregates, and (5) protection of the compounds by a combination of intra-aggregate diffusion and the presence of preferential flow pathways.     

Dynamics and mitigation of six pesticides in a “Wet” forest buffer zone

Pesticide pollution is one of the main current threats on water quality. This paper presents the potential and functioning principles of a “Wet” forest buffer zone for reducing concentrations and loads of glyphosate, isoproturon, metazachlor, azoxystrobin, epoxiconazole, and cyproconazole. A tracer injection experiment was conducted in the field in a forest buffer zone at Bray (France). A fine time-scale sampling enabled to illustrate that interactions between pesticides and forest buffer substrates (soil and organic-rich litter layer), had a retarding effect on molecule transfer. Low concentrations were observed for all pesticides at the forest buffer outlet thus demonstrating the efficiency of “Wet” forest buffer zone for pesticide dissipation. Pesticide masses injected in the forest buffer inlet directly determined concentration peaks observed at the outlet. Rapid and partially reversible adsorption was likely the major process affecting pesticide transfer for short retention times (a few hours to a few days). Remobilization of metazachlor, isoproturon, desmethylisoproturon, and AMPA was observed when non-contaminated water flows passed through the forest buffer. Our data suggest that pesticide sorption properties alone could not explain the complex reaction mechanisms that affected pesticide transfer in the forest buffer. Nevertheless, the thick layer of organic matter litter on the top of the forest soil was a key parameter, which enhanced partially reversible sorption of pesticide, thus retarded their transfer, decreased concentration peaks, and likely increased degradation of the pesticides. Consequently, to limit pesticide pollution transported by surface water, the use of already existing forest areas as buffer zones should be equally considered as the most commonly implemented grass buffer strips.     

Pesticide contamination of ground water in the United States--a review

Over 70 pesticides have been detected in ground water. Aldicarb and atrazine along with the soil fumigants EDB and DCP and DBCP have been the pesticides most frequently detected in ground water. Atrazine concentrations have been correlated with high nitrate concentrations. The triazine herbicides, simazine and cyanazine, have also been detected in ground water. The annual amount of recharge, soil type, depth of aquifer from the surface, nitrate contamination and soil pH are important field parameters in determining ground-water contamination potential by pesticides. Pesticide leaching is reduced by proper choice of crop rotation, increasing pesticide application efficiency, and integrated pest management.     

Sorption and leaching potential of acidic herbicides in Brazilian soils

Leaching of acidic herbicides (2,4-D, flumetsulam, and sulfentrazone) in soils was estimated by comparing the original and modified AF (Attenuation Factor) models for multi-layered soils (AFi). The original AFi model was modified to include the concept of pH-dependence for Kd (sorption coefficient) based on pesticide dissociation and changes in the accessibility of soil organic functional groups able to interact with the pesticide. The original and modified models, considering soil and herbicide properties, were applied to assess the leaching potential of selected herbicides in three Brazilian soils. The pH-dependent Kd values estimated for all three herbicides were observed to be always higher than pH-independent Kd values calculated using average Koc data, and therefore the original AFi model overestimated the overall leaching potential for the soils studied.     

Incorporating uncertainty in a chemical leaching assessment

Pesticide leaching models are being used to assist in the regulation and management of pesticides by indicating their potential for leaching to groundwater. Uncertainty in model input data is not, regrettably, included in most pesticide leaching assessments. In the work described here, we use logarithmic transformations of the attenuation factor (AF), a simple process-based index model, to represent uncertainty in a pesticide leaching assessment. Characterization of a wide range of pesticides as `leachers' or `non-leachers' for a specific Hawaii hydrogeological setting is facilitated by comparing the log-transformed AF, designated AFR, for each chemical with two reference chemicals for which leaching behavior in Hawaii is known. Defining a mean and uncertainty interval for the AFR index of each chemical being ranked provides a practical method of incorporating data uncertainty into a regulatory protocol.     

Effect of clarification process on the removal of pesticide residues in red wine and comparison with white wine

The aim of this study was to determine the potential of seven clarifying agents to remove pesticides in red wine. The presence of pesticides in wine consists a great problem for winemakers and therefore, results on pesticide removal by clarification are very useful for taking a decision on the appropriate adsorbent. The selection of an efficient adsorbent can be based on data correlating pesticide removal in red wine to pesticides' properties, given the great number and variety of pesticides used. So, this experimental work is focused on the collection of results with regard to pesticide removal by clarification using a great number of pesticides and fining agents. A Greek red wine, fortified with single solutions and mixtures of 23 or 9 pesticides was studied. The seven fining agents, used at two concentrations, were activated carbon, bentonite, polyvinylpolypyrrolidone (PVPP), gelatin, egg albumin, isinglass-fish glue, and casein. Pesticides were selected with a wide range of properties (octanol–water partition coefficient (log K_ow) 2.7–6.3 and water solubility 0.0002–142) and belong to 11 chemical groups. Solid phase extraction (SPE) followed by gas chromatography (GC) with electron capture detector (ECD) were performed to analyze pesticide residues of the clarified fortified wine. The correlation of the clarifying agents' effectiveness to pesticide's chemical structure and properties (log K_ow, water solubility) was investigated. The antagonistic and/or synergistic effects, occurring among the pesticides in the mixtures, were calculated by indices. Pesticide removal effectiveness results of the red wine were compared to those obtained from a white wine under the same experimental conditions and discussed. The order of decreasing adsorbent effectiveness (mixture of 23 pesticides) was: activated carbon 40% > gelatin 23% > egg albumin 21% > PVPP 18% > casein 12% > bentonite 7%. Isinglass showed 12% removal at the highest permitted concentration. In the case of 9 pesticides mixture, the effectiveness was quite higher but the order remained the same compared to 23 pesticides mixture. The removal of each pesticide from its single solution was generally the highest (particularly for hydrophobic pesticides). Adsorption on fining agents is increased by increasing hydrophobicity and decreasing hydrophilicity of organic pesticide molecules.     

Uptake and Modeling of Pesticides by Roots and Shoots of Parrotfeather (Myriophyllum aquaticum) (5 pp)

Intention, Goal, Scope, Background Aquatic plants have a great potential to function as in situ, on-site biosinks and biofilters of pollutants. They are used for phytoremediation and phytotoxicity studies. Pesticide uptake studies are very important to predict contaminant accumulation, translocation, and transformation. There are a lot of models which have been developed for emergent plants, but there are not any existing models for submerged aquatic plants for assessing pesticide uptake. Objective In this study, uptake of selected pesticides in parrotfeather (Myriophyllum aquaticum) were studied and the results were modeled with the aid of Log Kow and the concentration of pesticides. At the end, the developed model was compared to other existing models. Methods The test was conducted with parrotfeather as a model plant. The bioassay and cultivation of this plant were examined. Pesticide uptake by roots and shoots was determined using 14C-radiolabeled materials. Results and Discussion The results were fitted with an equation that showed a relationship between uptake and lipophilicity of pesticides. The model was compared with other pesticide uptake models developed for other plants. Atrazine and cycloxidim were taken up more by roots than by shoots in comparison to other pesticides used. The total uptake, both in shoots and roots, was lower than for terbutryn and trifluralin. The best appropriate model was developed from the results against the other models seen in the literature. The concentration factors (Root Concentration Factor (RCF) and Submerged Shoot Concentration Factor (SSCF)) increased with a higher Kow of the substances. The Submerged Shoot Concentration Factor (SSCF) revealed a better relationship of the chemicals than did the Root Concentration Factor (RCF). Conclusions In this study, an uptake model was developed for rooted, submerged aquatic plants. Further studies are necessary to develop and compare models with different plants and pesticides. Recommendation and Outlook Such studies as this one may be extended to other environmental pollutants in the aquatic ecosystem and may be employed to evaluate the possibility of using different plants in phytoremediation studies.     

Estrogenic and esterase-inhibiting potency in rainwater in relation to pesticide concentrations,sampling season and location

In a year-round monitoring program (1998), pesticide composition and toxic potency of the mix of pollutants present in rainwater were measured. The goal of the study was to relate atmospheric deposition of toxic potency and pesticide composition to each other and to sampling period and local agricultural activity. Rainwater was collected in 26 consecutive periods of 14 days in a background location (BACK) and in two locations representative for different agricultural practices, i.e. intensive greenhouse horticulture (HORT) and flower bulb culture (BULB). Samples were chemically analyzed for carbamate (CARB), organophosphate (OP) and organochlorine (OC) pesticides and metabolites. Esterase inhibiting potency of rainwater extracts was measured in a specially developed bio-assay with honeybee esterases and was expressed as an equivalent concentration of the model inhibitor dichlorvos. Estrogenic potency of the extracts was measured in the ER-CALUX reporter gene assay and was expressed as an equivalent concentration of estradiol. Multivariate principal component analysis (PCA) techniques proved to be valuable tools to analyze the numerous pesticide concentrations in relation to toxic potency, sampling location, and sampling season. Pesticide composition in rainwater depended much more on sampling season than on sampling location, but differences between and were mainly attributed to local differences in agricultural practice. On average, the esterase inhibiting potency exceeded the maximum permissible concentration set for dichlorvos in The Netherlands, and was significantly higher in than in and . Esterase inhibition correlated significantly with OP and CARB concentrations, as expected given the working mechanism of these insecticides. The estrogenic potency incidentally exceeded NOEC levels reported for aquatic organisms and was highest in . Although estrogenic potency of rainwater correlated with OC concentrations, the ER-CALUX responses could not be attributed to any particular pesticides. Besides, the contribution of non-analyzed xeno-estrogens as alkylphenol(-ethoxylates) and bisphenol-A to the estrogenic potency of rainwater could not be excluded. Further research should focus on the chemical identification of estrogenic compounds in rainwater. In addition, more attention should be given to the ecological consequences of atmospheric deposition of individual pesticides and of total toxic potencies that regularly exceed environmental criteria for Dutch surface waters and/or toxic threshold values for aquatic organisms.     

The status of pesticide pollution in surface waters (rivers and lakes) of Greece. Part I. Review on occurrence and levels

This review evaluates and summarizes the results of long-term research projects, monitoring programs and published papers concerning the pollution of surface waters (rivers and lakes) of Greece by pesticides. Pesticide classes mostly detected involve herbicides used extensively in corn, cotton and rice production, organophosphorus insecticides as well as the banned organochlorines insecticides due to their persistence in the aquatic environment. The compounds most frequently detected were atrazine, simazine, alachlor, metolachlor and trifluralin of the herbicides, diazinon, parathion methyl of the insecticides and lindane, endosulfan and aldrin of the organochlorine pesticides. Rivers were found to be more polluted than lakes. The detected concentrations of most pesticides follow a seasonal variation, with maximum values occurring during the late spring and summer period followed by a decrease during winter. Nationwide, in many cases the reported concentrations ranged in low ppb levels. However, elevated concentrations were recorded in areas of high pesticide use and intense agricultural practices. Generally, similar trends and levels of pesticides were found in Greek rivers compared to pesticide contamination in other European rivers. Monitoring of the Greek water resources for pesticide residues must continue, especially in agricultural regions, because the nationwide patterns of pesticide use are constantly changing. Moreover, emphasis should be placed on degradation products not sufficiently studied so far.     

Possible alkylation of inorganic Hg(II) by photochemical processes in the environment

Contamination of surface waters by pesticides continues to be the focus of concern for water authorities due to the growing evidence of their deleterious effects on aquatic life. In this context, the present work investigates the occurrence of 16 selected pesticides belonging to the classes of triazines, phenylureas, organophosphates, chloroacetanilides and thiocarbamates in surface waters from the Llobregat River (NE Spain) and some of its tributaries (Anoia and Rubí) and assesses their potential impact on the aquatic organisms by applying a recently developed index, the Short-term Pesticide Risk Index for the Surface Water System (PRISW-1), which takes into account the pesticides concentrations and their overall toxicity against three aquatic organisms (algae, Daphnia, and fish). Chemical analysis, performed by means of a fully automated method based on isotope dilution on-line solid phase extraction-liquid chromatography-electrospray-tandem mass spectrometry (on-line SPE-LC-ESI-MS/MS), revealed diuron and diazinon as the most ubiquitous and abundant compounds with levels up to 818 and 132 ng L⁻¹, respectively. Total pesticide concentrations, which in only 1 out of 66 samples surpassed 500 ng L⁻¹, were higher in the tributaries than in the river but their contribution in terms of mass-loads to the overall pesticide pollution of the Llobregat River was relatively small. Contamination increased downstream of the river and was clearly influenced by rainfall and hence river flow. Application of the PRISW-1 index indicated that, although pesticides levels fulfilled the European Union Environmental Quality Standards (EQS) for surface waters, the existing pesticide contamination poses a low to high ecotoxicological risk for aquatic organisms, that algae and macro-invertebrates are at higher risk than fish, and that the organophosphates diazinon and malathion and the phenylurea diuron are the major contributors to the overall toxicity and therefore the most problematic compounds.     

Sorption of isoxaflutole diketonitrile degradate (DKN) and dicamba in unsaturated soil

When analyzing the sorption characteristics of weakly sorbing or labile pesticides, batch methods tend to yield a high margin of error attributable to errors in concentration measurement and to degradation, respectively. This study employs a recently developed unsaturated transient flow method to determine the sorption of isoxaflutole's herbicidally active diketonitrile degradate (DKN) and dicamba. A 20-cm acrylic column was packed with soils with varied texture that had been uniformly treated with 14C-labeled chemical.The antecedent solution herbicide in equilibrium with sorbed phase herbicide was displaced by herbicide-free water, which was infiltrated into the column. Sorption coefficients, Kd, were obtained from a plot of total herbicide concentration in the soil versus water content in the region where the antecedent solution accumulated. DKN Kd values were approximately 2-3 times (average Kd = 0.71 L kg-1) greater using the unsaturated transient flow method as compared to the batch equilibration method in clay loam (Kd = 0.33 L kg-1), but similar for the two methods in sand (0.12 vs 0.09 L kg-1) soils. Dicamba Kd values were 3 times greater using the unsaturated transient flow method as compared to the batch equilibration method in the clay loam soil (0.38 vs 0.13 L kg-1), however, the Kd values were the same for the two methods in the sand (approximately 0.06 L kg-1). This demonstrates that to determine sorption coefficients for labile hydrophilic pesticides, an unsaturated transient flow method may be a suitable alternative to the batch method. In fact, it may be better in cases where transport models have overpredicted herbicide leaching when batch sorption coefficients have been used.     

Obsolete pesticides and application of colonizing plant species for remediation of contaminated soil in Kazakhstan

In Kazakhstan, there is a problem of finding ways to clean local sites contaminated with pesticides. In particular, such sites are the deserted and destroyed storehouses where these pesticides were stored; existing storehouses do not fulfill sanitary standards. Phytoremediation is one potential method for reducing risk from these pesticides. Genetic heterogeneity of populations of wild and weedy species growing on pesticide-contaminated soil provides a source of plant species tolerant to these conditions. These plant species may be useful for phytoremediation applications. In 2008–2009 and 2011, we surveyed substances stored in 80 former pesticide storehouses in Kazakhstan (Almaty oblast) to demonstrate an inventory process needed to understand the obsolete pesticide problem throughout the country, and observed a total of 354.7 t of obsolete pesticides. At the sites, we have found organochlorine pesticides residues in soil including metabolites of dichlorodiphenyltrichloroethane and isomers of hexachlorocyclohexane. Twenty-four of the storehouse sites showed pesticides concentrations in soil higher than maximum allowable concentration which is equal to 100 μg kg^?1 in Kazakhstan. Seventeen pesticide-tolerant wild plant species were selected from colonizing plants that grew into/near the former storehouse’s pesticides. The results have shown that colonizing plant annual and biannual species growing on soils polluted by pesticides possess ability to accumulate organochlorine pesticide residues and reduce pesticide concentrations in soil. Organochlorine pesticides taken up by the plants are distributed unevenly in different plant tissues. The main organ of organochlorine pesticide accumulation is the root system. The accumulation rate of organochlorine pesticides was found to be a specific characteristic of plant species and dependent on the degree of soil contamination. This information can be used for technology development of phytoremediation of pesticide-contaminated soils.     

Distribution coefficient of selenium in Japanese agricultural soils

In order to evaluate the selenium (Se) sorption level in Japanese soils, soil/soil solution distribution coefficients (K(d)s) were obtained for 58 agricultural soil samples (seven soil classification groups) using 75Se as a tracer. Although several chemical forms of Se are present in agricultural fields, selenite was used, because it is the major inorganic Se form in acid soils such as found in Japan. The Kd values obtained covered a wide range, from 12 to 1060l/kg, and their arithmetic mean was 315l/kg. Among the soil groups, Andosols had higher Kd values. The Kd values for all samples were highly correlated with soil active-aluminum (Al) and active-iron (Fe) contents. Thus, active-Al and active-Fe were considered to be the major adsorbents of Se. Then, a new sequential extraction procedure was applied to 12 soil samples in order to quantify the effect of soil components on Se adsorption. The sequential extraction results showed that 80-100% of the adsorbed Se was recovered as Al-bound Se and Fe-bound Se. The amount of Al-bound Se was the highest in the soils that showed high Kd values, though the relative contribution of Fe-bound Se tended to increase with decreasing Kd values. The high values of Kd seemed to be caused mainly by the adsorption of Se onto active-Al in Japanese soils.     

Use pattern of pesticides and their predicted mobility into shallow groundwater and surface water bodies of paddy lands in Mahaweli river basin in Sri Lanka

Pesticides applied on agricultural lands reach groundwater by leaching, and move to offsite water bodies by direct runoff, erosion and spray drift. Therefore, an assessment of the mobility of pesticides in water resources is important to safeguard such resources. Mobility of pesticides on agricultural lands of Mahaweli river basin in Sri Lanka has not been reported to date. In this context, the mobility potential of 32 pesticides on surface water and groundwater was assessed by widely used pesticide risk indicators, such as Attenuation Factor (AF) index and the Pesticide Impact Rating Index (PIRI) with some modifications. Four surface water bodies having greater than 20% land use of the catchment under agriculture, and shallow groundwater table at 3.0 m depth were selected for the risk assessment. According to AF, carbofuran, quinclorac and thiamethoxam are three most leachable pesticides having AF values 1.44 × 10^?2, 1.87 × 10^?3 and 5.70 × 10^?4, respectively. Using PIRI, offsite movement of pesticides by direct runoff was found to be greater than with the erosion of soil particles for the study area. Carbofuran and quinclorac are most mobile pesticides by direct runoff with runoff fractions of 0.01 and 0.08, respectively, at the studied area. Thiamethoxam and novaluron are the most mobile pesticides by erosion with erosion factions of 1.02 × 10^?4 and 1.05 × 10^?4, respectively. Expected pesticide residue levels in both surface and groundwater were predicted to remain below the USEPA health advisory levels, except for carbofuran, indicating that pesticide pollution is unlikely to exceed the available health guidelines in the Mahaweli river basin in Sri Lanka.     

An assessment of the significant physicochemical interactions involved in pesticide diffusion within a pesticide-sediment-water system

Using the explicit method of finite differences, a one-dimensional numerical model for the diffusion of pesticides through a sorbing porous medium under saturated conditions has been developed to assess the significant physical and chemical properties which influence the diffusion process in an aquatic system. The model quantitatively demonstrates in which area of the aquatic environment a given pesticide will principally reside, as well as providing a means of indicating to what degree various sediment and pesticide chemical and physical properties will influence the migration of the pesticide.     

LC-MS/MS determination of pesticide residues in fruits and vegetables

The aim of the research is to evaluate pesticide residue contamination of fresh and frozen fruits and vegetables, agricultural raw material, purchased from Polish farmers for production of frozen fruits and vegetables, and the estimation of the multiresidue method effectiveness expressed as the proportion of pesticides detected in food samples to the total number of pesticides analyzed by multiresidue methods. A total of 144 samples (of black currants, red currants, raspberries, cherries, strawberries, blackberries, cauliflowers and broccoli) were analyzed using LC-MS/MS method for the determination of 60 pesticides. QuEChERS extraction, matrix-matched calibration and dynamic multiple reaction monitoring method were used. Residues of 15 compounds, mainly fungicides and insecticides, were detected in 46 samples. The percentage of samples with residues above the maximum residue levels (MRL) was 15%, whereas samples with residues below MRL were 17%. A total of 13 samples contained more than one pesticide residue. Pesticide residues were detected most often in samples of black currants (50%), broccoli (36.4%), raspberries (29%) and red currants (21.8%). The most frequently detected pesticides were carbendazim and acetamiprid. The proportion of pesticides detected during our study to the total number of analyzed pesticides amounted to 25%. It was compared to literature findings. For three fourth of multiresidue methods, the proportion was below 50% for methods developed for the analysis of less than 100 pesticides, and below 30% for methods developed for the analysis of more than 100 pesticides. It appears that a lot of efforts and means is lost on pesticides never or rarely detected in examined samples. The workload and cost effectiveness of the development and application of multiresidue methods along with the range of pesticides covered by the method should be carefully and thoroughly considered anytime when a new method or workflow is developed. Including non-targeted screenings in pesticide residue control seems to be an alternative worth considering.     

Cyclodextrin inclusion: catalytic effects on the degradation of organophosphorus pesticides in neutral aqueous solution.

alpha-, beta and gamma-Cyclodextrins were found to have promotive inclusion-catalytic effects on the degradation of organophosphorus pesticides solubilized in neutral aqueous media. Pesticide degradations were especially accelerated in such systems as alpha-cyclodextrin plus diazinon and beta-cyclodextrin plus chloropyrifos. The above findings are in contrast with the inhibitive catalytic effects of cyclodextrins on pesticide degradations in alkaline media. Cyclodextrin catalytic effects found here were considerably affected by differences in the substitutional and hetero-cyclic properties of the aromatic rings of pesticides and also by the sizes of cyclodextrin cavities.     

Modelling pesticide volatilization after soil application using the mechanistic model Volt'Air

Volatilization of pesticides participates in atmospheric contamination and affects environmental ecosystems including human welfare. Modelling at relevant time and spatial scales is needed to better understand the complex processes involved in pesticide volatilization. Volt'Air-Pesticides has been developed following a two-step procedure to study pesticide volatilization at the field scale and at a quarter time step. Firstly, Volt'Air-NH₃ was adapted by extending the initial transfer of solutes to pesticides and by adding specific calculations for physico-chemical equilibriums as well as for the degradation of pesticides in soil. Secondly, the model was evaluated in terms of 3 pesticides applied on bare soil (atrazine, alachlor, and trifluralin) which display a wide range of volatilization rates. A sensitivity analysis confirmed the relevance of tuning to K_h. Then, using Volt'Air-Pesticides, environmental conditions and emission fluxes of the pesticides were compared to fluxes measured under 2 environmental conditions. The model fairly well described water temporal dynamics, soil surface temperature, and energy budget. Overall, Volt'Air-Pesticides estimates of the order of magnitude of the volatilization flux of all three compounds were in good agreement with the field measurements. The model also satisfactorily simulated the decrease in the volatilization rate of the three pesticides during night-time as well as the decrease in the soil surface residue of trifluralin before and after incorporation. However, the timing of the maximum flux rate during the day was not correctly described, thought to be linked to an increased adsorption under dry soil conditions. Thanks to Volt'Air's capacity to deal with pedo-climatic conditions, several existing parameterizations describing adsorption as a function of soil water content could be tested. However, this point requires further investigation. Practically speaking, Volt'Air-Pesticides can be a useful tool to make decision about agricultural practices such as incorporation or for the estimation of overall pesticide volatilization rates, and it holds promise for time specific dynamics.