Polycyclic aromatic hydrocarbon contamination in stormwater detention pond sediments in coastal South Carolina

The purpose of this study was to characterize the polycyclic aromatic hydrocarbon (PAH) contamination in the sediments of stormwater detention ponds in coastal South Carolina. Levels of the sum of PAH analytes were significantly higher in the sediments of commercial ponds compared to that of reference, golf course, low-density residential, and high-density residential ponds. Isomer ratio analysis suggested that the predominant source of PAHs were pyrogenic; however, many ponds had a PAH signature consistent with mixed uncombusted and combusted PAH sources. PAH levels in these sediments could be modeled using both pond drainage area and pond surface area. These results demonstrate that the sediment from most commercial ponds, and a few residential and golf course ponds, were moderately contaminated with PAHs. PAH levels in these contaminated ponds exceeded between 42% and 75% of the ecological screening values for individual PAH analytes established by US EPA Region IV, suggesting that they may pose a toxicological risk to wildlife.     

Impact of urbanization on the concentrations and distribution of organic contaminants in boreal lake sediments

The main goal of this study was to evaluate the impacts of a middle-sized Finnish urban area on the quality of sediments in an adjacent boreal lake. We investigated the sources and distribution of organic pollutants (polycyclic aromatic hydrocarbons (PAHs) and polychlorinated biphenyls (PCBs)) in the sediments from urban stormwater traps and from Lake Vesijärvi. Grab surface sediment samples were taken from Lake Vesijärvi at various distances (25–2,000 m) from four major stormwater drainage outlets and at 15 urban stormwater traps in areas with different degrees of urbanization. These samples were analysed for 16 PAHs and 28 PCBs with gas chromatography–mass spectrometry. The concentrations of pollutants in the lake sediments were elevated in the vicinity of the urban shore (∑PAH 3–16, ∑PCB up to 0.02–0.3 mg/kg dw) and decreased as a function of distance (∑PAH 0.1–2.5, ∑PCB 0.01–0.3 mg/kg dw at a distance of more than 500 m from the shore), whereas contamination levels in suburban areas were notably lower (∑PAH 0.1–3, ∑PCB?<?LOQ–0.03 mg/kg dw; did not decline with distance). Possible sources and pathways of contamination were also investigated. The majority of stormwater trap sediments contained predominantly asphalt-derived PAHs due to pulverized pavement. PAHs in lake sediments were of pyrogenic origin, including the combustion of gasoline, diesel and coal. Suggested pathways of lake contamination are urban runoff discharge, boat traffic and atmospheric deposition.     

Environmental assessment of polycyclic aromatic hydrocarbons in the surface sediments of a remote region on the eastern coast,Taiwan

Surface sediment samples were collected in He-Ping Harbor and the nearby He-Ping Estuary from 2005 to 2006 to examine spatial and temporal variability in polycyclic aromatic hydrocarbon (PAH) concentrations. The sum of the 16 USEPA priority pollutant PAHs varied from 8 to 312 ng/g dry weight, which was relatively low compared to values obtained from other studies in the world. Regarding temporal changes in the PAH profile, total PAH concentrations in the wet season were lower than during the dry season in He-Ping Harbor. However, the concentration of PAHs exhibited no significant difference in the four seasons in the He-Ping Estuary. PAH concentrations in He-Ping Harbor were higher than those in the He-Ping Estuary. In comparison with sediment quality guidelines, PAH concentrations of sediments in this study were lower than those outlined in the criteria, which suggests no evident adverse biological effects due to PAHs around the He-Ping coast. Ratios of specific PAH compounds calculated to assess the possible sources of PAHs reflect that PAHs in He-Ping Harbor may mainly be from pyrogenic coal combustion.     

Description and evaluation of a sampling system for monitoring hydrocarbons in sediments

A composite random sampling design was used to estimate the concentrations of hydrocarbons in sediments from two near-shore areas of Scotland (Firth of Clyde and Firth of Forth). The aim of this work was to estimate a mean value for each parameter in these areas, and to determine whether this can be done with more thorough coverage (better representation), better precision and less variance at lower analytical cost through a composite random sampling scheme rather than a simple random sampling scheme, and thereby contribute to the re-design of the UK National Marine Monitoring Programme (NMMP), re-named the UK Clean Seas Environmental Monitoring Programme (CSEMP) in 2006. Samples were collected using a simple random sampling design during 2005. All sediment samples were analysed for their particle size distribution and total organic carbon (TOC). All sediments were analysed for polycyclic aromatic hydrocarbons (PAHs) and n-alkanes. The concentrations of PAHs and n-alkanes in the study areas are described, and sources of PAHs were investigated through the PAH distributions and n-alkane profiles. Individual sediment samples from each area were combined to give a series of composite sub-samples, each comprised of 5 individual sediment samples. These composite samples were re-analysed for the same parameters as the individual samples. Mean total PAH (2- to 6-ring parent and branched) concentrations, based on the individual original sediment samples collected through simple random sampling, were 1858 microg kg(-1) dry weight (SE = 196 microg kg(-1) dry weight, n = 25) and 532.4 microg kg(-1) dry weight (SE = 59 microg kg(-1) dry weight, n = 25) in the Clyde and Forth, respectively. Mean total PAH concentrations of the composite samples were 1745 microg kg(-1) dry weight (SE = 121.0 microg kg(-1) dry weight, n = 5) in the Clyde and 511.6 microg kg(-1) dry weight (SE = 37.4 microg kg(-1) dry weight, n = 5) in the Forth. No significant differences were found between the mean PAH concentrations from the two sampling designs. This study demonstrated that the composite random sampling design gave a mean value with less variance than the simple random sampling design, at significantly reduced analytical effort (and cost).     

Polycyclic aromatic hydrocarbons in river sediments from the western and southern catchments of the Bohai Sea, China: toxicity assessment and source identification

The concentration, distribution, and origin of 16 USEPA priority polycyclic aromatic hydrocarbons (PAHs) were investigated in river sediments from the western and southern catchments of the Bohai Sea, China. A toxicity assessment of 28 sediment samples collected from 15 main rivers was conducted by utilizing threshold and probable effect concentrations (TEC and PEC, respectively) derived from consensus-based sediment quality guidelines. The concentrations of total PAHs (∑PAH₁₆) ranged from 0.14 to 10,757 μg/kg dry weight (mean?=?1,368.6 μg/kg). The high concentrations of PAHs found in Binhai New Area of Tianjin and Binzhou City are likely the result of rapid population and heavy industry growth, resulting in elevated point and nonpoint source inputs of PAHs. Of the samples collected, samples 1 and 10 (7.1 % of the total) were categorized as toxic since some of the PAH concentrations exceeded the corresponding PECs. Twenty samples were classified as nontoxic, with both the individual PAH and the∑PAH₁₆ concentrations falling below the corresponding TECs. Analyses of selected PAH isomer ratios aided in the identification of PAH origins, allowing for a discrimination between pyrogenic and petrogenic sources. Spatial variability confirmed source heterogeneity within the study area. The most significant PAH-associated contamination was found in the Beitang River and Ji Canal, which are located in Binhai New Area. The magnitude of contamination and the likelihood of an ongoing influx of PAHs support the need for a better understanding of pollution sources and methods for both control and sediment restoration.     

Polycyclic aromatic hydrocarbons (PAHs) in surface sediments from the Bizerte Lagoon,Tunisia: levels,sources, and toxicological significance

To assess the status of polycyclic aromatic hydrocarbon (PAH) contamination in sediments from the Bizerte Lagoon (northern Tunisia), 18 surface sediment samples were collected in March 2011 and analyzed for 14 US Environmental Protection Agency priority PAHs by high-performance liquid chromatography. The total concentrations of the 14 PAHs (ΣPAHs) ranged from 16.9 to 394.1 ng g^?1 dry weight (dw) with a mean concentration of 85.5 ng g^?1 dw. Compared with other lagoons, coasts, and bays in the world, the concentrations of PAHs in surface sediments of the Bizerte Lagoon are low to moderate. The PAHs’ composition pattern was dominated by the presence of four-ring PAHs (45.8 %) followed by five-ring (26.8 %) and three-ring PAHs (12.7 %). The PAH source analysis suggested that the main origin of PAHs in the sediments of the lagoon was mainly from pyrolytic sources. According to the numerical effect-based sediment quality guidelines of the USA, the levels of PAHs in the Bizerte Lagoon should not exert adverse biological effects. The total benzo[a]pyrene toxicity equivalent values calculated for the samples varied from 3.1 to 53.7 ng g^?1 dw with an average of 10.6 ng g^?1 dw.     

The distribution and composition of hydrocarbons in sediments from the Fladen Ground, North Sea, an area of oil production

The distribution and composition of hydrocarbons in sediment from the Fladen Ground oilfield in the northern North Sea have been investigated. The total PAH concentrations (2- to 6-ring parent and alkylated PAHs, including the 16 US EPA PAHs) in sediments were relatively low (<100 microg kg(-1) dry weight). The PAH, the Forties crude and diesel oil equivalent concentrations were generally higher in sediment of fine grain size and higher organic carbon concentration. PAH distributions and concentration ratios indicated a predominantly pyrolytic input, being dominated by the heavier, more persistent, 5- and 6-ring compounds, and with a high proportion of parent PAHs. The n-alkane profiles of a number of the sediments contained small, high boiling point, UCMs, indicative of weathered oil arising from a limited petrogenic input. The geochemical biomarker profiles of the sediments that contained UCMs showed a small bisnorhopane peak and a high proportion of norhopane relative to hopane, indicating that there was contamination from both Middle Eastern and North Sea oils. Therefore contamination was not directly as a result of oil exploration activity in the area. The most likely source of petrogenic contamination was from general shipping activity.     

Sedimentary record of polycyclic aromatic hydrocarbons in a sediment core from a maar lake, Northeast China: evidence in historical atmospheric deposition

A maar lake is an excellent ecosystem to study the atmospheric deposition of pollutants, as its contaminants are primarily by atmospheric deposition. In this study, a sediment core from Sihailongwan Maar Lake, Northeast China, was collected and the historical atmospherically deposited polycyclic aromatic hydrocarbons (PAHs) were analyzed. The concentrations of TPAHs (the sum of the US EPA proposed 16 priority PAHs, excluding naphthalene and pyrene) ranged from 473.9 to 2289 ng g(-1) with a slow increasing stage in the deeper sediments and a sharp increasing stage in the upper sediments. The input rate of TPAHs, especially that of PAH(9) (the sum of fluoranthene, benzo(a)anthracene, chrysene, benzo(b)fluoranthene, benzo(k)fluoranthene, benzo(a)pyrene, indeno(1,2,3-cd)pyrene, dibenzo(ah)anthrathene, and benzo(ghi)perylene), correlated well to the Chinese historical socioeconomic data. This indicates that sediment PAHs were mainly derived from human activities and PAH(9) can be regarded as a better indicator of the local socioeconomic development. Source identification suggested that PAHs were originated primarily from mixed sources (e.g., coal and biomass burning and petroleum combustion), except for perylene which was mostly of diagenetic origin. In addition, the down-core PAHs profile clearly illustrated that PAHs sources in Northeast China experienced a transformation from low- and moderate temperature to high-temperature combustion processes, especially after the late 1980s. Additionally, an ecological risk assessment using two redefined biological thresholds (TEQ(ERL) and TEQ(ERM)) indicated that most of the PAHs measured in the present sediment core would not cause an immediate toxic effect; only FLU and PHEN are a potential source of concern for biological impairment.     

Occurrence, source apportionment and toxicity assessment of polycyclic aromatic hydrocarbons in surface sediments of Chaohu, one of the most polluted lakes in China

In order to evaluate the effect of local anthropogenic activities on Chaohu Lake, one of the most eutrophicated lakes in China, surface sediments have been collected from the whole lake with 0.05 × 0.05 degree latitude/longitude resolution and in the estuaries of three main inflowing rivers. The concentrations of the 28 polycyclic aromatic hydrocarbons (PAHs) determined were in a range 82.4-13,000 ng g(-1) with an average value of 1670 ng g(-1) dry weight for total 28 PAHs (referred to as Σ(28)PAH). Amongst the 28 PAHs, 16 are listed as high priority PAHs by the USEPA and they were in the range of 60.8-10,200 ng g(-1) with an average value of 1230 ng g(-1) for the total of them (referred to as Σ(16)PAH); 7 are known as carcinogenic PAHs and their levels ranged from 34.2 to 6400 ng g(-1) with an average of 815 ng g(-1) in total (referred to as Σ(7)PAH). Chaohu Lake was considered significantly polluted by PAHs through the comparison with the PAH burdens in fresh-water lakes both in China and worldwide. Toxic units (TUs) evaluation showed some sampling locations possibly were over the median lethal level for benthic invertebrate. The highest PAH concentrations were found in sediments from the Nanfei River estuary, suggesting the major contributor of PAHs contamination to the lake. The PAHs with four and five rings were found to be dominant among the PAHs detected in all of the sediment samples, and perylene was the most abundant. Σ(16)PAH had a good correlation with those PAHs from pyrogenic sources, such as anthracene and phenanthrene, but a poor correlation with perylene. The results demonstrated that the environmental behavior of PAHs from pyrogenic sources is significantly different to that of perylene from diagenetic sources. The PAHs in sediments were mainly from traffic-related emission by qualitatively assessing with the diagnostic ratios of PAH isomers, and the ratios for low molecular weight PAHs were strongly altered during their transport.     

Distribution characteristics of polycyclic aromatic hydrocarbons in sediments and biota from the Zha Long Wetland, China

In this paper, the concentrations of polycyclic aromatic hydrocarbons (PAHs) were measured in biota (reed, grass, mussel, fish, and red-crowned crane) and sediments collected from seven locations in the Zha Long Wetland. PAHs were recovered from the sediments and biota by ultrasonic extraction and then analyzed by means of gas chromatography-mass spectrometry. The total PAH concentrations were 244–713 ng/g dw in sediments, 82.8–415 ng/g dw in plants and 207–4,780 ng/g dw in animals. The total sediment PAH concentrations were categorized as lower to moderate contamination compared with other regions of China and the world. In the plant samples, the accumulation abilities of reed roots and stems for PAHs were higher than those of grass roots. In addition, the concentration of individual PAHs in mussel muscles was the highest in all of the animal samples, followed by fish, feeding crane fetuses, and wild crane fetuses. Compositional analysis suggests that the PAHs in the sediments from the Zha Long Wetland were derived from incomplete biomass combustion. Risk assessment shows that the levels of PAHs in sediments are mostly lower than the effects range mean value (effects range mean), whereas only naphthalene in all sample sites was higher than the effects range low value. It is worthwhile to note that benzo(b)fluoranthene, benzo(k)fluoranthene, indeno(1,2,3-cd)pyrene and benzo(ghi)perylene were detected in crane fetal, which have potential carcinogenicity for organisms from the Zha Long Wetland.     

The polycyclic aromatic hydrocarbon and geochemical biomarker composition of sediments from sea lochs on the west coast of Scotland

Sediments from twelve sea lochs on the west coast of Scotland were analysed for parent and branched 2- to 6-ring polycyclic aromatic hydrocarbons (PAHs), n-alkanes and geochemical biomarkers (triterpanes). Where possible at least fourteen sediment samples were collected at random from each sea loch. All sea lochs were remote, most had limited industrial and urban inputs, although all had fish farms. Four lochs had moderate total PAH concentrations and eight lochs had high total PAH concentrations. Total PAH concentration was related to organic carbon content and particle size distribution, with sandier sediments having lower PAH concentrations. The highest total PAH concentrations, normalised for organic carbon, were in Loch Linnhe and Ballachulish Bay (Loch Leven), close to an aluminium smelter. PAH concentration ratios showed that pyrolysis was the main source of PAHs in most lochs. Only sediments from Loch Clash showed evidence of petrogenic input based on their geochemical biomarker (triterpane and sterane) and n-alkane profiles. PAH profiles were similar across lochs apart from Loch Linnhe and Ballachulish Bay, which had a greater proportion of heavy parent PAHs. West coast sediments had a smaller proportion of heavy PAHs than sediments collected from voes in Shetland and a smaller proportion of alkylated PAHs relative to sediments collected from coastal waters around Orkney.     

Analysis of sediments from Shetland Island voes for polycyclic aromatic hydrocarbons, steranes and triterpanes

A few days after the grounding of the oil tanker Braer on 5 January 1993, an Exclusion Zone was designated by Order under the Food and Environment Protection Act 1985, prohibiting the harvesting of farmed or wild shellfish within the Zone to prevent contaminated products reaching the market place. The order was progressively lifted for species that were found to be free of petrogenic taint and for which the polycyclic aromatic hydrocarbon (PAH) levels were within the range for reference samples. This Order, however, still remains in place for mussels (Mytilus edulis) as the PAH levels are higher than in reference mussels. To investigate the possible source of PAHs found in these mussels, sediments were collected from three reference and three Zone sites and their hydrocarbon compositions studied using the n-alkane composition and concentration, PAH composition and concentration and the sterane and triterpane composition. The reference site at Olna Firth was found to have the highest levels of 2-6-ring parent and branched PAHs, the highest concentration in one of the pooled sediments being 4,530 ng g(-1) dry weight. Values in the other two reference sites (Vaila Sound and Mangaster Voe) ranged from 248.7 to 902.2 ng g(-1) dry weight. PAH concentrations at the Zone sites (Sandsound Voe, Stromness Voe and Punds Voe) ranged from 641.0 to 2,766 ng g(-1) dry weight. The PAH data were normalised to the percentage of organic carbon and log-transformed prior to being analysed using principal component analysis. The mean total PAH concentrations for Zone sites were found not to be significantly different from the reference sites. The PAH concentration ratios were consistent with the main source of PAHs being pyrolysis. However, there was a petrogenic contribution, suggested by the presence of alkylated PAHs, with Punds Voe having the largest petrogenic hydrocarbon content. This was supported by the triterpane profiles and the presence of a UCM in the aliphatic chromatograms from Punds Voe sediments.     

Assessment of Cu, Pb, and Zn contamination in sediment of north western Peninsular Malaysia by using sediment quality values and different geochemical indices

Surface sediments were collected from the north western aquatic area (13 intertidal sites and 5 river drainages) of Peninsular Malaysia, which were suspected to have received different anthropogenic sources. These sites included town areas, ports, fishing village, industrial areas, highway sides, jetties and some relatively unpolluted sites. The present study revealed that 4.79-32.91 μg/g dry weight for Cu, 15.85-61.56 μg/g dry weight for Pb, and 33.6-317.4 μg/g dry weight for Zn based on 13 intertidal surface sediments while those based on 5 river drainage surface sediments were 10.24-119.6 μg/g dry weight for Cu, 26.7-125.7 μg/g dry weight for Pb and 88.7-484.1 μg/g dry weight for Zn. In general, the metal levels in the drainage sediments are higher than in the intertidal sediments, suggesting dilution factor in the intertidal sediment and direct effluent from point sources in the drainage sediment. In particular, the total concentrations of Cu, Pb, and Zn for the sampling site at Kuala Kurau Town exceeded the Effect Range Median values for Cu, Pb, and Zn for assessments of sediment quality values for freshwater sediment as proposed by MacDonald et al. (Arch Environ Contam Toxicol 39:20-31, 2000), thus adverse biological effects would be observed above this level. Assessment using enrichment factor (using Fe as a normalizer) and geoaccumulation index showed that the three metals at Kuala Kurau Town and Juru Industry drainage were evidenced as having more enrichment and mostly due to non-natural sources. However, caution should be exercised that the interpretation can only become valid when the ratios, indices, and sediment quality values are combined. This is due to the fact that not all the established indices are applicable and, to a certain extent, some of them should be further revised and improved to suit a different metal for Malaysian sediment. Undoubtedly, sites near drainages at Kuala Kurau Town and Juru River Basin need greater attention to mitigate the heavy metal pollution in the future.     

Sources and seasonal variation of PAHs in the sediments of drinking water reservoirs in Hong Kong and the Dongjiang River (China)

The main objective of this study was to investigate occurrence of polycyclic aromatic hydrocarbons (PAHs) in the sources of the drinking water supply of Hong Kong. The main emphasis was on the Dongjiang River in mainland China which is the major source, supplying 80% of the total consumption in Hong Kong (the remaining 20% is obtained from rain water). Sediments were collected from four sites along the Dongjiang River and four reservoirs in Hong Kong during both the dry and wet weather seasons. The concentrations of total PAHs in the sediments ranged between 36 and 539 microg/kg dry wt. The lower levels were detected at the upstream site on the Dongjiang River and at the reservoirs in Hong Kong (44-85 microg/kg dry wt), while the mid- and downstream sites on the Dongjiang River were more polluted (588-658 microg/kg dry wt). Examination of the PAH profiles revealed that the mid- and downstream sections of the Dongjiang River contained high percentages of 4,5,6-ring PAHs, similar to the amounts of atmospheric particulate matter and road dust collected during the dry weather season from the Pearl River Delta region as reported in the literature. Seasonal changes were revealed in the reservoirs of Hong Kong, with higher PAH levels in the wet weather season than in the dry weather season. For those reservoirs in Hong Kong that store water from the Dongjiang River, a distinct seasonal pattern was also observed, namely, that under dry weather season conditions the PAHs found in the sediments were primarily from petrogenic source, while under wet weather season conditions they were from pyrolytic sources. No such pattern was detected in the reservoirs which stored only rain water.     

Polycyclic aromatic hydrocarbons in surface water and bed sediments of the Hungarian upper section of the Danube River

This study was performed to elucidate the distribution, concentration trend and possible source of polycyclic aromatic hydrocarbons (PAHs) in surface water and bed sediments of the Hungarian upper section of the Danube River and the Moson Danube branch. A total of 217 samples (water and sediments) were collected from four different sampling sites in the period of 2001–2010 and analysed for the 16 priority US Environmental Protection Agency PAHs. Concentrations of total 16 PAHs (∑PAHs) in water samples ranged from 25 to 1,208 ng/L, which were predominated by two- and three-ring PAHs. The ∑PAH concentrations in sediments ranged from 8.3 to 1,202.5 ng/g dry weight. Four-ring PAHs including fluoranthene and pyrene were the dominant species in sediment samples. A selected number of concentration ratios of specific PAH compounds were calculated to evaluate the possible sources of PAH contamination. The ratios reflected a pattern of pyrogenic input as a major source of PAHs. The levels of PAHs determined were compared with other sections of the Danube and other regions of the world.     

Profiles,sources, and transport of polycyclic aromatic hydrocarbons in soils affected by electronic waste recycling in Longtang,south China

We studied the profiles, possible sources, and transport of polycyclic aromatic hydrocarbons (PAHs) in soils from the Longtang area, which is an electronic waste (e-waste) recycling center in south China. The sum of 16 PAH concentrations ranged from 25 to 4,300 ng/g (dry weight basis) in the following order: pond sediment sites (77 ng/g), vegetable fields (129 ng/g), paddy fields (180 ng/g), wastelands (258 ng/g), dismantling sites (678 ng/g), and former open burning sites (2,340 ng/g). Naphthalene, phenanthrene, fluoranthene, pyrene, chrysene, and benzo[b]fluoranthene were the dominant PAHs and accounted for approximately 75 % of the total PAHs. The similar composition characteristics of PAHs and the significant correlations among individual, low molecular weight, high molecular weight, and total PAHs were found in all six sampling site types, thus indicating that PAHs originated from similar sources. The results of both isomeric ratios and principal component analyses confirmed that PAHs were mainly derived from the incomplete combustion of e-waste. The former open burning sites and dismantling sites were the main sources of PAHs. Soil samples that were taken closer to the point sources had high PAH concentrations. PAHs are transported via different soil profiles, including those in agricultural fields, and have been detected not only in 0- to 40-cm-deep soil but also in 40 cm to 80 cm-deep soil. PAH concentrations in soils in Longtang have been strongly affected by primitive e-waste recycling, particularly by former open burning activities.     

The concentrations, distribution and sources of PAHs in agricultural soils and vegetables from Shunde, Guangdong, China

The concentrations, distribution and sources of 16 polycyclic aromatic hydrocarbons (PAHs) were determined in 30 agricultural soil and 16 vegetable samples collected from subtropical Shunde area, an important manufacturing center in China. The total PAHs ranged from 33.7 to 350 μg/kg in soils, and 82 to 1,258 μg/kg in vegetables. The most abundant individual PAHs are phenanthrene, fluoranthene, chrysene, pyrene and benzo(b)fluoranthene for soil samples, and anthracene, naphthalene, phenanthrene, pyrene and chrysene for vegetable samples. Average vegetable–soil ratios of total PAHs were 2.20 for leafy vegetables and 1.27 for fruity vegetables. Total PAHs in vegetable samples are not significantly correlated to those in corresponding soil samples. Principal component analyses were conducted to distinguish samples on basis of their distribution in each town, soil type and vegetable specie. Relatively abundant soil PAHs were found in town Jun’an, Beijiao, Chencun, Lecong and Ronggui, while abundant vegetable PAHs were observed in town Jun’an, Lecong, Xingtan, Daliang and Chenchun. The highest level of total PAHs were found in vegetable soil, followed by pond sediment and “stacked soil” on pond banks. The PAHs contents in leafy vegetables are higher than those in fruity vegetables. Some PAH compound ratios suggest the PAHs derived from incomplete combustion of petroleum, coal and refuse from power generation and ceramic manufacturing, and paint spraying on furniture, as well as sewage irrigation from textile industries. Soil PAHs contents have significant logarithmic correlation with total organic carbon, which demonstrates the importance of soil organic matter as sorbent to prevent losses of PAHs.     

Concentrations of polycyclic aromatic hydrocarbon in the surface sediments from inter-tidal areas of Kenting coast,Taiwan

The main objective of this study was to investigate the concentrations of polycyclic aromatic hydrocarbons (PAHs) in inter-tidal sediments of the Kenting coast, Taiwan, to assess the levels and origin of PAHs, and to provide useful information on the potential ecological risk of PAHs to benthic organisms. The total concentrations of 38 PAHs ranged from 0.2 to 493 ng/g dry weight. The high variation in total PAH concentrations was caused by the sand content of the sediment in the area. Compared with other coasts and bays in the world, the concentrations of PAHs in the inter-tidal surface sediment of the Kenting coast is low to moderate. Based on the sediment quality guidelines, the total PAH concentrations were below the effects range low value, indicating that the PAH levels in the Kenting area were within minimal effects ranges for benthic organisms. Principal component analysis and isomer ratios were analyzed to identify the contamination source in the inter-tidal surface sediment of the Kenting coast. The results of compounds’ pattern and origin analysis suggest that the source of PAHs in the inter-tidal surface sediment of the Kenting coast is the combustion of petroleum and biomass.     

Polycyclic aromatic hydrocarbons and polychlorinated biphenyls in the harbour of Naples (Southern Italy): time and spatial distribution patterns

Seventeen parent polycyclic aromatic hydrocarbons (PAHs) and 38 congeners of polychlorinated biphenyls were measured at five different sediment depths (between the surface and ~300 cm below the seafloor) at 160 sites in Naples harbour. Total PAH (??PAH) and PCB (??PCB) concentrations ranged between 0.012?C21.73^???nd 0.001?C0.222 mg kg^???1, respectively. For PAHs, an evident and progressive decrease in concentration with depth documents the effects of a more intense anthropic impact of this group of pollutants in the recent period. A selected number of PAH isomer pairs (phenanthrene/anthracene, fluoranthene/pyrene and benzo(a)anthracene/crysene) were used to distinguish between contaminants of pyrolitic and petrogenic origin. More than 90% of PAHs present at the different depths of the studied sediments indicate pyrolitic industrial origins. On the other hand, relatively high concentrations of three- and four-ring PAHs suggest a limited contribution of vehicular emissions to the contamination of sediments. An unexpected and systematic increase of ??PCB concentration, exceeding values approved by international regulations, was found in the studied sediments, testifying to the uncontrolled discharge to the studied area from industrial and commercial activity on nearby land. Ecotoxicological risk levels calculated for PAHs suggests a relatively elevated level of toxicity in surface sediments decreasing with depth and very low toxicity values associated to PCB toxicity.     

Sorption and desorption of benzo(a)pyrene in aquatic systems

The sorptive behaviour of polycyclic aromatic hydrocarbons (PAHs) is critical to controlling their transport, fates and effects in the environment. Experiments are described which detail the behaviour of a model compound (benzo(a)pyrene) under simulated aquatic conditions. The kinetics of sorption were comparable to those of other PAH compounds. The sorption equilibrium was extensively studied and found to be affected by several key parameters, notably sediment concentration. The sorption coefficient decreased substantially with the sediment concentration, from 9580 ml g(-1) at a sediment concentration of 0.067 g l(-1) to 1,110 ml g(-1) at a sediment concentration of 9.8 g l(-1). The results are consistent with previous reports and often explained by the presence of colloids. In this paper the dry weight concentration of colloids was determined and used for deriving the true sorption coefficient, which is up to an order of magnitude higher than the observed partition coefficient. The sorption of benzo(a)pyrene was also dependent on some of the particle properties, and the sorption coefficient was found to increase with the organic carbon content and specific surface area of sediment particles. The desorption of benzo(a)pyrene from sediment was shown to be relatively rapid, with implications for the potential remobilisation of benzo(a)pyrene and similar compounds.