Light-induced transformation of tribenuron-methyl on glass, soil, and plant surface

Photolysis of tribenuron-methyl (methyl 2-[[[[N-(4-methoxy-6-methyl-1,3,5triazin-2-yl)methylamino]carbonyl]amino]sulfonyl]benzoate), a sulfonylurea herbicide, was studied as thin film on glass surface, soil surface, and plant surface. A number of photoproducts such as 4-methoxy-6-methyl-2-aminomethyl-1,3,5-triazine; methyl-2-(aminosulfonyl) benzoate; N-(2-carbomethoxyphenyl)-N-(4-methoxy-6-methyl-1,3,5-triazin-2-yl)-N'-methylurea; N-(2-carbomethoxyphenyl sulfonyl)-N-methyl urea; o-benzoic sulfimide and 4-methoxy-6-methyl-2-amino-1,3,5-triazine were identified by comparison of their GC-MS with the authentic standards. The rate of degradation in all the cases followed first-order kinetics with a statistically significant correlation coefficient. Rate of photodegradation was greater on glass surface than on soil surface.     

Fate and degradation of triasulfuron in soil and water under laboratory conditions

The behavior and fate of triasulfuron (TRS) in water and soil systems were examined in laboratory studies. The degradation of TRS in both buffer solution and soil was highly pH-sensitive. The rate of degradation could be described with a pseudo first-order kinetic and was much faster at pH 4 than at pH 7 and 9. Aqueous hydrolysis occurred by cleavage of the sulfonylurea bridge to form 2-(2-chloroethoxy) benzenesulfonamide (CBSA) and [(4-methoxy-6-methyl-1,3,5-triazin-2-yl)amino] (AMMT). AMMT was unstable in aqueous solutions in any pH condition but it degraded more quickly at pH 4 and 9. CBSA did not degrade in aqueous solutions or in enriched cultures but it underwent a quick degradation in the soil. The rates of TRS degradation in sterile and non-sterile soils were similar, suggesting that microorganisms played a minimal role in the breakdown process. This hypothesis is supported by the results of studies on the degradation of TRS by enriched cultures during which the molecule underwent a prevalently chemical degradation.     

Fate and degradation of triasulfuron in soil and water under laboratory conditions

The behavior and fate of triasulfuron (TRS) in water and soil systems were examined in laboratory studies. The degradation of TRS in both buffer solution and soil was highly pH-sensitive. The rate of degradation could be described with a pseudo first-order kinetic and was much faster at pH 4 than at pH 7 and 9. Aqueous hydrolysis occurred by cleavage of the sulfonylurea bridge to form 2-(2-chloroethoxy) benzenesulfonamide (CBSA) and [(4-methoxy-6-methyl-1,3,5-triazin-2-yl)amino] (AMMT). AMMT was unstable in aqueous solutions in any pH condition but it degraded more quickly at pH 4 and 9. CBSA did not degrade in aqueous solutions or in enriched cultures but it underwent a quick degradation in the soil. The rates of TRS degradation in sterile and non-sterile soils were similar, suggesting that microorganisms played a minimal role in the breakdown process. This hypothesis is supported by the results of studies on the degradation of TRS by enriched cultures during which the molecule underwent a prevalently chemical degradation.     

Persistence and bioactivity of metsulfuron-methyl in three soils

The persistence of metsulfuron-methyl (methyl 2-[[(4-methoxy-6-methyl-1,3,5-triazin-2-yl)aminocarbonyl]aminosul fonyl]benzoate) in nonautoclaved and autoclaved Selangor, Lating, and Serdang series soils incubated at different temperatures and with different moisture contents was investigated under laboratory conditions using cucumber (Cucumis sativus L.) as the bioassay species. Significant degradation of metsulfuron-methyl was observed in nonautoclaved soil compared with the autoclaved soil sample, indicating the importance of microorganisms in the breakdown process. At higher temperatures the degradation rate in nonautoclaved soil improved with increasing soil moisture content. In nonautoclaved Selangor, Lating and Serdang series soils, the half-life was reduced from 4.79 to 2.78 days, 4.9 to 3.5, and from 3.3 to 1.9 days, respectively, when the temperature was increased from 20 degrees to 30 degrees C at 80% field capacity. Similarly, in nonautoclaved soil, the half-life decreased with an increasing soil moisture from 20% to 80% at 30 degrees C in the three soils studied. In the autoclaved soil, the half-life values were slightly higher than those obtained in the nonautoclaved soils, perhaps indicating that the compound may be broken down by nonbiological processes. The fresh weight of the bioassay species was reduced significantly in Serdang series soil treated with metsulfuron-methyl at 0.1 ppm. However, the reduction in fresh weight of the seedlings was least in Lating series soil, followed by Selangor series soil.     

Leaching and degradation of ethametsulfuron-methyl in soil

Leaching and degradation of the herbicide ethametsulfuron-methyl[methyl 2-[(4-ethoxy-6-methylamino-1,3,5-triazine-2-yl)carbamoylsulfamoyl]benzoate] in three soils were investigated under laboratory conditions. Ethametsulfuron-methyl was mobile on soils when tested using non-aged and aged soil columns; this mobility agreed reasonably well with Freundlich soil isotherm constants. It was found that ethametsulfuron-methyl was more mobile in alkaline sandy Vertisol soil and neutral loamy Alfisol soil than in acidic clayey Red soil. Degradation of ethametsulfuron-methyl in soils was pH-dependent; calculated half-life (t(1/2)) values ranged from 13 to 67 days. Ethametsulfuron-methyl was more persistent in neutral or weakly basic than in acidic soil. Five soil metabolites were isolated and identified by LC/MS/MS analysis. The degradation pathways included the cleavage of the sulfonylurea bridge, N- and O-dealkylation, and triazine ring opening.     

Kinetics of hydrolysis and cyclization of ethyl 2-(aminosulfonyl)benzoate to saccharin

The cyclization of ethyl 2-(aminosulfonyl)benzoate (ASB) to give saccharin was investigated in aqueous solutions at pH between 5.2 and 9.5 and in the temperature range of 296.2-334.2 K. The initial concentration of the reactant was varied between 1.45 x 10(-5) and 3.86 x 10(-4) M. Ultraviolet spectroscopy was used to obtain the kinetic data. The reaction is acid catalyzed and follows pseudo-first-order kinetics. The experimental rate constant, k(obs), increases with temperature and pH. Its dependence on the temperature and pH is well described by: k(obs) = k1 [OH-] = [(2.52 +/- 0.9) x 10(16) exp(-20.2 +/- 1 kcalmol(-1)/RT) s(-1)][OH-] A mechanism is proposed and the half-life of ethyl ASB is calculated.     

Degradation behaviour of pyrazosulfuron-ethyl in water as affected by pH

Pyrazosulfuron-ethyl, a new herbicide belonging to the sulfonylurea group, is used for weed control in rice crops growing in areas varying from acidic to alkaline soils. This study was undertaken to determine the degradation behaviour of pyrazosulfuron-ethyl in distilled water and buffer solutions at pH 4, 7 and 9. Degradation was pH-dependent and herbicide was least persistent in acidic pH followed by alkaline and neutral pH. The half-life of pyrazosulfuron-ethyl varied from 2.6 days (pH 4) to 19.4 days (pH 7) and half-life in distilled water was comparable to half-life at pH 7 buffer. HPLC analysis of different pH samples showed the formation of three metabolites viz., 5-(aminosulfonyl)-1-methyl-1H-pyrazole-4-carboxylic acid; ethyl 5-(aminosulfonyl)-1-methyl-1H-pyrazole-4-carboxylate and 2-amino-4,6-dimethoxy pyrimidine. The formation of pyrazosulfuron acid [5-([([(4,6-dimethoxy-2 pyrimidinyl)-amino]-carbonyl) amino]-sulfonyl)-1-methyl-1H-pyrazole-4-carboxylic acid] was not observed at any pH. The study indicated that the herbicide was least stable under acidic conditions and the predominant degradation route of pyrazosulfuron-ethyl in water is hydrolysis of sulfonamide linkage.     

Soil Persistence of Triasulfuron Herbicide as Affected by Biotic and Abiotic Factors

Persistence of triasulfuron [3-(6-methoxy-4methyl-1,3,5-triazin-2-yl)-1-{2-(2-chloroethoxy)-phenylsulfonyl}-urea] in soil was studied under wheat crop and laboratory conditions. Field experiment was conducted in the farms of Agronomy Division, Indian Agricultural Research Institute (IARI), New Delhi. Randomized block design (RBD) was followed with four replicates and two rates of treatments along with control and weedy check. Triasulfuron was applied as post-emergent application to wheat crop at two rates of application viz., 15 g and 20 g a.i. ha^?1. Soil samples at 0 (3 h), 1, 3, 5, 7, 10, 15, 20, and 30-day intervals after application were drawn, extracted, cleaned up, and analyzed for herbicide residues by high performance liquid chromatography (HPLC) using C₁₈ column and methanol: water (8:2) as mobile phase at 242 nm wave length. Effect of microbial activity and soil pH was studied under laboratory conditions. Dissipation of triasulfuron followed a first-order-rate kinetics. Residues dissipated from field soil with half-life of 5.8 and 5.9 days at two rates of application. The study indicated biphasic degradation with faster rate initially (t _1/2 = 3.7 days), followed by a slower dissipation rate at the end (t _1/2 = 9.4 days). Similar trend was observed with non-sterile soil in laboratory with a longer half-life. Acidic pH and microbial activity contributed toward the degradation of triasulfuron in soil.     

Soil persistence of triasulfuron herbicide as affected by biotic and abiotic factors

Persistence of triasulfuron [3-(6-methoxy-4methyl-1,3,5-triazin-2-yl)-1-{2-(2-chloroethoxy)-phenylsulfonyl}-urea] in soil was studied under wheat crop and laboratory conditions. Field experiment was conducted in the farms of Agronomy Division, Indian Agricultural Research Institute (IARI), New Delhi. Randomized block design (RBD) was followed with four replicates and two rates of treatments along with control and weedy check. Triasulfuron was applied as post-emergent application to wheat crop at two rates of application viz., 15 g and 20 g a.i. ha-1. Soil samples at 0 (3 h), 1, 3, 5, 7, 10, 15, 20, and 30-day intervals after application were drawn, extracted, cleaned up, and analyzed for herbicide residues by high performance liquid chromatography (HPLC) using C18 column and methanol: water (8:2) as mobile phase at 242 nm wave length. Effect of microbial activity and soil pH was studied under laboratory conditions. Dissipation of triasulfuron followed a first-order-rate kinetics. Residues dissipated from field soil with half-life of 5.8 and 5.9 days at two rates of application. The study indicated biphasic degradation with faster rate initially (t1/2 = 3.7 days), followed by a slower dissipation rate at the end (t1/2 = 9.4 days). Similar trend was observed with non-sterile soil in laboratory with a longer half-life. Acidic pH and microbial activity contributed toward the degradation of triasulfuron in soil.     

Acetamiprid, carbendazim, diuron and thiamethoxam sorption in two Brazilian tropical soils

Sorption of acetamiprid ((E)-N1-[(6-chloro-3-pyridyl)methyl]-N2-cyano-N1-methylacetamidine), carbendazim (methyl benzimidazol-2-ylcarbamate), diuron (N-(3,4-dichlorophenyl)-N, N-dimethyl urea) and thiamethoxam (3-(2-chloro-thiazol-5-ylmethyl)-5-methyl-[1,3,5]oxadiazinan-4-ylidene-N-nitroamine) was evaluated in two Brazilian tropical soils, Oxisol and Entisol, from Primavera do Leste region, Mato Grosso State, Brazil. To describe the sorption process, batch experiments were carried out. Linear and Freundlich isotherm models were used to calculate the K(d) and K(f) coefficients from experimental data. The K(d) values were utilized to calculate the partition coefficient normalized to soil organic carbon (K(oc)). For the pesticides acetamiprid, carbendazim, diuron and thiamenthoxan the K(oc) (mL g(- 1)) values ranged in both soils from 98 - 3235, 1024 - 2644, 145 - 2631 and 104 - 2877, respectively. From the studied pesticides, only carbendazim presented correlation (r(2) = 0.82 and p < 0.01) with soil organic carbon (OC) content. Acetamiprid and thiamethoxam showed low sorption coefficients, representing a high risk of surface and ground water contamination.     

Sorption behavior of metolachlor, isoproturon, and terbuthylazine in soils

The sorption-desorption of metolachlor [2-chloro-N-(ethyl-6-methyl phenyl)-N-(2-methoxy-1-methyl ethyl) acetamide], isoproturon [3-(4-isopropyl phenyl)-1,1-dimethyl urea] and terbuthylazine [N6-tert butyl-6-chloro-N4-ethyl-1,3,5-triazine-2,4-diamine] herbicides was studied in two German soils at 1:10 soil to water ratio by batch method. Equilibrium of herbicides between soil and water (0.01 M CaCl2) was attained in 2 h. Sorption data fitted very well to Freundlich equation, represented by very high correlation coefficient (r2 > 0.934). Comparison of Freundlich K values indicated that sorption of all the three herbicides was most pronounced in soil having higher organic carbon content. Koc values were as expected nearly identical for each herbicide in the two soils. The Freundlich constant (1/n) was about 1 for metolachlor and less than 1 for terbuthylazine and isoproturon indicating a L-type of sorption isotherms. Desorption of all the three herbicides showed hysteresis. Nearly equal amounts of metolachlor, isoproturon and terbuthylazine were desorbed from both soils. There was a good correlation between Koc and solubility.     

Acetamiprid,carbendazim, diuron and thiamethoxam sorption in two Brazilian tropical soils

Sorption of acetamiprid ((E)-N1-[(6-chloro-3-pyridyl)methyl]-N2-cyano-N1-methylacetamidine), carbendazim (methyl benzimidazol-2-ylcarbamate), diuron (N-(3,4-dichlorophenyl)-N, N-dimethyl urea) and thiamethoxam (3-(2-chloro-thiazol-5-ylmethyl)-5-methyl-[1,3,5]oxadiazinan-4-ylidene-N-nitroamine) was evaluated in two Brazilian tropical soils, Oxisol and Entisol, from Primavera do Leste region, Mato Grosso State, Brazil. To describe the sorption process, batch experiments were carried out. Linear and Freundlich isotherm models were used to calculate the K _d and K _f coefficients from experimental data. The K _d values were utilized to calculate the partition coefficient normalized to soil organic carbon (K _oc ). For the pesticides acetamiprid, carbendazim, diuron and thiamenthoxan the K _oc (mL g^{? 1}) values ranged in both soils from 98 – 3235, 1024 – 2644, 145 – 2631 and 104 – 2877, respectively. From the studied pesticides, only carbendazim presented correlation (r² = 0.82 and p < 0.01) with soil organic carbon (OC) content. Acetamiprid and thiamethoxam showed low sorption coefficients, representing a high risk of surface and ground water contamination.     

Investigation of photodegradation and hydrolysis of selected substituted urea and organophosphate pesticides in water

Introduction  

Photodegradation and hydrolysis of two substituted urea herbicides, monolinuron [3-(4-chlorophenyl)-1-methoxy-1-methylurea] and linuron [3-(3,4-dichlorophenyl)-1-methoxy-1-methylurea], and one organophosphorous insecticide, phoxim [2-(diethoxyphosphinothioyloxyimino)-2-phenylacetonitrile], were studied using buffered sterilized distilled water (pH 4, 7 and 9).     

Sorption–desorption of indaziflam and its three metabolites in sandy soils

Indaziflam is a relatively new herbicide for which sorption–desorption information is lacking, and nothing is available on its metabolites. Information is needed on the multiple soil and pesticide characteristics known to influence these processes. For four soils, the order of sorption was indaziflam (N-[1R,2S)-2,3-dihydro-2,6-dimethyl-1H-inden-1-yl]-6-[(1R)-1-fluoroethyl]-1,3,5-triazine-2,4-diamine) (sandy clay loam: K_f = 5.9, 1/n_f = 0.7, K_foc = 447; sandy loam: K_f = 3.9, 1/n_f = 0.9, K_foc = 276) > triazine indanone metabolite (N-[(1R,2S)-2,3-dihydro-2,6-dimethyl-3-oxo-1H-inden-1-yl]-6-[(1R)-1-fluoroethyl]-1,3,5-triazine-2,4-diamine) (sandy clay loam: K_f = 2.1, 1/n_f = 0.8, K_foc = 177; sandy loam: K_f = 1.7, 1/n_f = 0.9, K_foc = 118) > fluoroethyldiaminotriazine metabolite (6-[(1R-1-Fluoroethyl]-1,3,5-triazine-2,4-diamine) (sandy clay loam: K_f = 0.3, 1/n_f = 0.9, K_foc = 28; sandy loam: K_f = 0.3, 1/n_f = 0.9, K_foc = 22) = indaziflam carboxylic acid metabolite (2S,3R)-3-[[4-amino-6-[(1R)-1-fluoroethyl]-1,3,5-triazin-2-yl]amino]-2,3-dihydro-2-methyl-1H-indene-5-carboxylic acid) (sandy clay loam: K_f = 0.3, 1/n_f = 0.9, K_foc = 22; sandy loam: K_f = 0.5, 1/n_f = 0.8, K_foc = 32). The metabolites being more polar than the parent compound showed lower sorption. Desorption was hysteretic for indaziflam and triazine indanone metabolite, but not for the other two metabolites. Unsaturated transient flow K_d's were lower than batch K_d's for indaziflam, but similar for fluoroethyldiaminotriazine metabolite. Batch K_d's would overpredict potential offsite transport if desorption hysteresis is not taken into account.     

Retention capacity of an organic bio-mixture against different mixtures of fungicides used in vineyards

A laboratory experiment was carried out to test the efficiency of a bio-mixture made up of pruning residues at two (PR2) and five (PR5) years of composting and wheat straw (STW) in the biological cleaning of water contaminated by different mixtures of fungicides usually employed in vineyards. The experiment was conducted and reproduced at a scale of 1:100 of operating field conditions. Commercial formulates of penconazole (PC), (RS)-1-[2-(2,4-dichlorophenyl)pentyl]-1H-1,2,4-triazole), dimetomorph (DM), (EZ)-4-[3-(4-chlorophenyl)-3-(3,4-dimethoxyphenyl)acryloyl]morpholine), azoxystrobin (AZ), (methyl (E)-2-{2-[6-(2-cyanophenoxy)pyrimidin-4-yloxy]phenyl}-3-methoxyacrylate), iprovalicarb (IP), (isopropyl 2-methyl-1-[(RS)-1-p-tolylethyl]carbamoyl-(S)-propylcarbamate), metalaxyl (MX), (methyl N-(methoxyacetyl)-N-(2,6-xylyl)-DL-alaninate), fludioxonil (FL), (4-(2,2-difluoro-1,3-benzodioxol-4-yl)-1H-pyrrole-3-carbonitrile) and cyprodinil (CY), (4-cyclopropyl-6-methyl-N-phenylpyrimidin-2-amine) were mixed in water and discharged into the bio-mixture following the time schedule of the treatments carried out in the grapevine in real field conditions. At each treatment, contaminated water with fungicides was circulated repeatedly through the bio-mixture to enhance the sorption of fungicides. In fact, it retained them between 98–100% with the exception of MX of which it was able to retain only 90.5%. The adsorption/desorption experiment showed that repeated circulation of water, instead of enhancing MX retention, can easily remove about 30% of MX already adsorbed by the bio-mixture. This finding suggests that water contaminated by very mobile pesticides should be discharged at the end of field treatments without re-circulating the water in order to avoid the release of pesticides weakly adsorbed on the bio-mixture.     

Photochemical behavior of chlorsulfuronR in water and in adsorbed phase

The photochemistry of the herbicide chlorsulfuron^R (2-chloro-N-[[4-methoxy-6-methyl-1.3.5-triazinyl-2-amino]carbonyl]benzene sulfonamide) was investigated in methanol, distilled water, natural creek-water, on silica gel and on montmorillonit surfaces. The rate of degradation was determined in outdoor and indoor experiments simulating tropospheric conditions (λ>290 nm). Two major photoproducts were identified in all cases.     

Runoff of trifluralin,metolachlor, and metribuzin from a clay loam soil of Louisiana

Trifluralin[2,6-dinitro-N,N-dipropyl-4-(trifluormethyl)benzenamine], metolachlor[2-chloro-N-(2-ethyl-6-methylphenyl)-N-(2-methoxy-1-methylethyl) acetamide] and metribuzin[4-amino-6-(1,1-dimethylethyl)-3-(methylthio)-1,2,4-triazin-5(4H)one] were applied as pre-emergent herbicides to soybean plots in Louisiana (LA) at the rate of 1683 g/ha, 2759 g/ha and 609 g/ha, respectively. The concentrations of trifluralin in the runoff water ranged between 0.09 ng/mL and 0.02 ng/mL, which is lower than the 2 ng/mL US Environmental Protection Agency (EPA) advisory level for trifuralin in drinking water. Metolachlor concentrations in the runoff water ranged from 9.0 ng/mL to 221.5 ng/mL, which is both lower and higher than the 175 ng/mL EPA advisory level for metolachlor. Similarly, metribuzin concentrations in the runoff water ranged between 1.5 ng/mL and 56.2 ng/mL, which is also lower and higher than the 10 ng/mL EPA advisory level for metribuzin. Accordingly, from the field plots located on a Commerce clay loam soil in LA, although the concentration of trifluralin in runoff water were substantially lower than the EPA advisory level, metolachlor and metribuzin concentrations are likely to exceed the EPA advisory levels early on in the application season with a subsequent rapid decrease to safe levels. The total loss of trifluralin in runoff water was 0.005% of the applied amount over an 89 day period after application. The total loss of metolachlor and metribuzin in the runoff water was 4.67% and 5.36% of the applied amount, respectively, over a 22 day period after application. As such, there was almost no movement of trifluralin in the runoff water, whereas metolachlor and metribuzin were much more easily moved.     

Influence of sugar cane vinasse on the sorption and degradation of herbicides in soil under controlled conditions

This study reports the influence of sugar cane vinasse on the persistence, sorption and leaching potential of diuron (3-(3,4-dichlorophenyl)-1,1-dimethylurea), hexazinone (3-cyclohexyl-6-(dimethylamino)-1-methyl-1,3,5-triazine-2,4-dione) and tebuthiuron (1-(5-tert-butyl-1,3,4-thiadiazol-2-yl)-1,3-dimethylurea) in both a clay and sandy soil from a tropical area of Brazil. The experiments were conducted out under controlled laboratory conditions. The addition of sugarcane vinasse to soil influenced the persistence and sorption of the herbicides in both the studied clay and sandy soils, with a considerable decrease in the diuron DT₅₀ values in clay soil. The Ground Water Ubiquity Score (GUS) Index classifies the herbicides as leachers in both soils and treatments, with the exception of diuron, which is classified as a non-leacher in clay soil-vinasse and as a transient herbicide in sandy soil. These results suggest that special attention should be given to areas such as those where the sandy soil was collected in this study, which is a recharge area of the Guarani Aquifer and is likely to experience groundwater contamination due to the high leaching potential of the applied pesticides.     

Photolysis of the herbicide bispyribac sodium in aqueous medium under the influence of UV and sunlight in presence or absence of sensitizers

The photolysis of a rice herbicide Bispyribac sodium (Sodium 2, 6-bis [(4, 6-dimethoxypyrimidin-2-yl) oxy] benzoate) has been studied in different aqueous medium (distilled water, pond water and Irrigation water) under the influence of UV (λ max ≥ 250 nm) and sunlight in presence or absence of sensitizers (TiO₂ and KNO₃). The study was conducted under laboratory simulated condition which made it possible to evaluate the contribution of different factors viz. source of irradiation, solvent and sensitizers towards the photolysis of bispyribac sodium. The photodegradation proceeds via first order reaction Kinetics in all the cases. Five photo metabolites (M₁-M₅) were isolated in pure form by column chromatographic method from the irradiation system under UV influenced and TiO₂ as sensitizer. From the different spectral data (IR, NMR, UV-VIS, Mass) the structure of these five metabolites were assigned as M₁ (Phenol), M₂ [2, 6-Dihydroxy benzoic acid], M₃ [2, 6-bis [(4, 6 dimethoxypyrimidin-2yl) oxy] benzoic acid], M₄ [2-(3-Hydroxy-phenoxy)-pyrimidine-4, 6-diol] and M₅ as [2,4-Dihydroxy-3, 5-dimethoxy-6-(4-methoxy pyrimidine-2-yloxy)-benzoic acid]. Moreover, another six photometabolites (M₆-M₁₁) were identified from the different irradiation system on the basis of Micromass analysis. On the basis of MS/MS data analysis, the structure of these six photometabolites were assigned as M₆ [2-(4, 6-Dimethoxy-pyrimidin-2-yloxy)-6-hydroxy-benzoic acid], M₇ [2-Hydroxy-6-(4-hydroxy-6-methoxy-pyrimidin-2-yloxy)-benzoic acid], M₈ [4, 6-Dimethoxy-pyrimidin-2-ol], M₉ [6-Methoxy-pyrimidine-2, 4-diol], M₁₀ [2-Hydroxy-6-(pyrimidin-2-yloxy)-benzoic acid] and M₁₁ [2, 4, 6-Trimethoxy-pyrimidine]. The plausible Photodegradation pathways of bispyribac sodium in the present investigation were portrayed which proceeds via hydrolysis, hydrolytic cleavage, O-dealkylation, decarboxylation, dehydroxylation, O-alkylation and hydroxylation.     

Kinetics and mechanism of the hydrolysis of thiamethoxam

The degradation of thiamethoxam [(EZ)-3-(2-chloro-1,3-thiazol-5-yl-methyl)-5-methyl-1,3,5-oxadiazinan-4-ylidene (nitro) amine] insecticide in buffers at different pH and temperature levels was investigated in laboratory studies. Acidic hydrolysis under conventional heating conditions and alkaline hydrolysis under both conventional heating and microwave conditions were carried out. Different hydrolysis products were found to form under alkaline and acidic conditions. Hydrolysis of thiamethoxam in acidic, neutral and alkaline buffers followed first-order reaction rate kinetics at pH 4, 7 and 9.2, respectively. Thiamethoxam readily hydrolyzed in alkaline buffer but was comparatively stable in neutral buffer solution. The main products formed under different conditions were characterized on the basis of infrared (IR), ¹H-NMR and Mass spectroscopy. The possible mechanisms for the formation of these hydrolysis products have also been proposed.