Use of contaminated well water, example reference biospheres 1 and 2A

The BIOMASS programme's Theme 1 evaluated a number of scenarios, which assisted in the development of practical guidance. A total of four Example Reference Biospheres were fully developed, with the assumptions, data, and models thoroughly documented. These Examples display both the practicality and the transparency available through the use of the Reference Biosphere Methodology. While the methodology is designed to promote transparency and traceability, proper documentation and justification is still the responsibility of the user. The Examples can also be used as generic analyses in some situations. Although it is anticipated that each of the Reference Biospheres explored within BIOMASS Theme 1 should be a useful practical example, the quantitative results of the model calculations are not intended to be understood as prescribed biosphere 'conversion factors'. In choosing to implement an Example, careful consideration would need to be given to their relevance (including associated data) to the particular assessment context at hand. In general, the more complex the model is, the more limited applicability it has for generic purposes. For example, ERB1A (direct use of well water for drinking) can be used straightforwardly, with minor or no adjustments, at a number of generic sites. Example 2A, however, for which climatic conditions and agricultural practices need to be specified, would need to be implemented for each specific situation.     

"Reference Biospheres" for solid radioactive waste disposal: the BIOMASS methodology

The BIOMASS Theme 1 project has developed a methodology for the logical and defensible construction of 'assessment biospheres': mathematical representations of biospheres used in the total system performance assessment of radioactive waste disposal. The BIOMASS Methodology provides a systematic approach to decision making, including decisions on how to address biosphere change. The BIOMASS Methodology was developed through consultation and collaboration with many relevant organisations, including regulators, operators and a variety of independent experts. It has been developed to be practical and to be consistent with recommendations from ICRP and IAEA on radiation protection in the context of the disposal of long-lived solid radioactive wastes. The five main steps in the methodology are described in this paper. The importance of a clear assessment context, to clarify intentions and to support a coherent biosphere assessment process within an overall repository performance assessment, is strongly emphasised. A well described assessment context is an important tool for ensuring consistency across the performance assessment as a whole. The use of interaction matrices has been found to be helpful in clarifying the interactions between different habitats within the biosphere system and the significant radionuclide transfer pathways within the biosphere system. Matrices also provide a useful means of checking for consistency.     

Radiological risk assessment and biosphere modelling for radioactive waste disposal in Switzerland

Long-term safety assessments for geological disposal of radioactive waste in Switzerland involve the demonstration that the annual radiation dose to humans due to the potential release of radionuclides from the waste repository into the biosphere will not exceed the regulatory limit of 0.1 mSv. Here, we describe the simple but robust approach used by Nagra (Swiss National Cooperative for the Disposal of Radioactive Waste) to quantify the dose to humans as a result to time-dependent release of radionuclides from the geosphere into the biosphere. The model calculates the concentrations of radionuclides in different terrestrial and aquatic compartments of the surface environment. The fluxes of water and solids within the environment are the drivers for the exchange of radionuclides between these compartments. The calculated radionuclide concentrations in the biosphere are then used to estimate the radiation doses to humans due to various exposure paths (e.g. ingestion of radionuclides via drinking water and food, inhalation of radionuclides, external irradiation from radionuclides in soils). In this paper we also discuss recent new achievements and planned future work.     

Biosphere modelling for the assessment of radioactive waste repositories; the development of a common basis by the BIOMOVS II reference biospheres working group

Performance criteria for radioactive waste repositories are often expressed in terms of dose or risk. The characteristics of biosphere modelling for performance assessment are that: (a) potential release occurs in the distant future, (b) reliable predictions of human behaviour at the time of release are impracticable, and (c) the biosphere is not considered to be a barrier as the geosphere and the engineered barriers. For these and other reasons, differences have arisen in the approaches to biosphere modelling for repository dose and risk assessment. The BIOMOVS II Reference Biospheres Working Group has developed (a) a recommended methodology for biosphere model development, (b) a structured list of features, events and processes (FEPs) which the model should describe, and (c) an illustrative example of the recommended methodology. The Working Group has successfully tested the Interaction Matrix (or Rock Engineering Systems, RES) approach for developing conceptual models. The BIOMOVS II Working Groups on Reference Biospheres and Complementary Studies have laid the basis for considerable harmonisation in approaches to biosphere modelling of long term radionuclide releases.     

PestScreen: a screening approach for scoring and ranking pesticides by their environmental and toxicological concern

A chemical ranking and scoring method entitled PestScreen has been developed as a screening tool to provide a relative assessment of pesticide hazards to human health and the environment. The method was developed to serve as an analytical tool in screening and identification of pesticides of environmental concern used in agriculture. PestScreen incorporates both the toxic effects of pesticides and their fate and exposure characteristics in different compartments of the environment. This is done by combining measures of chemical toxicity pertaining to both human health and the environment with chemical release amounts and information on overall environmental persistence, long-range transport potential and human population intake fractions. Each hazard measure is scored and weighted and finally combined with the pesticide application dose to provide a single final indicator of relative concern (PestScore). Results for 217 pesticides are presented and the practical implementation is illustrated on behalf of three practical case studies.     

Disposal practices for unused medications in New Zealand

BackgroundThere is an enhanced international awareness that the improper disposal of unwanted and unused medications may have a detrimental effect on the environment.ObjectivesThe aim of this study was to determine the proportion of unused medications in New Zealand that are not returned to a pharmacy for disposal and are instead disposed of via land fill or water systems. In addition, this study intended to identify why these medications were unused or unwanted.DesignAn online survey was placed on the New Zealand National Poisons Centre website for a period of three months during 2008. This consisted of a series of questions with predefined answer sets and asked about collection of medications, why there may be unused medications, storage of medications and disposal of medications.ResultsThis survey was completed by 452 individuals. 62% of respondents currently had unwanted medications in their house. The most common reason for people to have leftover medication was ‘medical condition improved or resolved’ (n = 307). Depending on formulation type, between 13–24% of unused medications were returned to pharmacies with tablets and capsules being most likely to be returned and liquids most likely to be added to water systems.ConclusionsA significant percentage of unwanted medications are disposed of via routes that have the potential to adversely affect the environment. Reducing excess medications and wastage as well as education of appropriate disposal techniques may minimize their potential impact on the environment.     

Ethics, genetics and dynamics: an emerging systematic approach to radiation protection of the environment

There is now a general consensus of opinion that an explicit approach is necessary to demonstrate radiation protection of the environment, and that this approach needs to be developed in a systematic way. The framework that is emerging links ethical and moral issues (anthropocentric, biocentric, and ecocentric) to broad-based principles and objectives of environmental protection (sustainable development, maintaining biological diversity, and habitat protection) and then links these, in turn, to the needs of current environmental management practices, such as environmental exploitation, pollution control, and nature conservation. The relevance of this to radiation is that its effects (such as causing early mortality, morbidity, reduced reproductive success, as well as resulting in observable (scorable) cytogenetic damage) are those that may have a bearing on these same environmental management practices. The devise that would appear to be most useful to bridge the gap between our disparate data on radiation effects and the needs of environmental management, is that of adding to the concept of Reference Man in the shape of a small set of Reference Animals and Plants. This approach has now been adopted by the ICRP, adding new dynamics-the motive forces, both moral and physical-to the subject. The way is now clear for rapid progress to be made on a number of fronts.     

Arsenic geochemistry and health

Arsenic occurs naturally in the earth's crust and is widely distributed in the environment. Natural mineralization and activities of microorganisms enhance arsenic mobilization in the environment but human intervention has exacerbated arsenic contamination. Although arsenic is useful for industrial, agricultural, medicinal and other purposes, it exerts a toxic effect in a variety of organisms, including humans. Arsenic exposure may not only affect and disable organs of the body, especially the skin, but may also interfere with the proper functioning of the immune system. This paper, therefore, generally highlights the toxic effects of arsenic as well as its mobilization in the natural environment and possible controls. It also briefly attempts to outline the impact of arsenic on the immune system, whose alteration could lead to viral/bacterial infections.     

Closed-loop supply chain system with energy,transportation and waste disposal costs

Energy usage and consumption play important and strategic roles in modern manufacturing, inventory and logistics systems. The literature on inventory models for closed-loop supply chains reveals that, for no clear reasons, energy costs were ignored along with transportation and disposal costs. This paper introduces a closed-loop supply chain model that considers the economic value and energy content of products. It also offers a novel framework for studying lot-sizing policies of production processes in that context. Thus, a mathematical model for a closed-loop supply chain system with energy, transportation and disposal costs is developed. Numerical examples are provided with their results discussed. The developed model was also compared to that of Richter (1996) to stress the importance of accounting for the three noted costs. The numerical results emphasise that accounting for energy, transportation and disposal costs in supply chain modelling increases the sustainability of a production-inventory system due to the strong interdependence of the three costs on one hand, and their relationship to the environment on the other hand.     

A systemic health risk assessment for the chromium cycle in Taiwan

Health risk assessment (HRA) has been recognized as a useful tool for identifying health risks of human activities. In particular, this method has been well applied to spatially defined units, such as a production plant, a treatment facility, and a contaminated site. However, the management strategies based on the risk information will be more efficient if the comprehensive picture of total risks from all kinds of sources is depicted. In principle, the total risks can be obtained when all risk sources are assessed individually. Apparently, this approach demands huge amount of efforts. This study develops a methodology that combines substance flow and risk estimation to facilitate examination of risk in a systemic way and provide comprehensive understanding of risk generation and distribution corresponding to flows of substances in the anthroposphere and the environment. Substance flow analysis (SFA) and HRA method is integrated to produce a systemic risk assessment method, from which substance management schemes can be derived. In this study, the chromium cycle in Taiwan is used as an example to demonstrate the method, by which the associated substance flow in the economy and the risk caused by the substance in the environmental system is determined. The concentrations of pollutants in the environmental media, the resultant risks and hazard quotients are calculated with the widely-used CalTOX multimedia model.     

Methods of landscape ecology in prognostic estimation of the biotic regulation of the carbon cycle under conditions of global climate warming

The strategy of prognostic landscape-ecological studies on climatogenic changes in the biological cycle and carbon balance in forest ecosystems as leading factors of the biotic regulation of the environment is presented. Methods are described for constructing analytical and cartographic empirical statistical models that make it possible to reveal the local mechanisms of biotic regulation and identify the zonal/regional types of forest formations capable of stabilizing the continental biosphere in the changing climate.     

Beyond the medicine cabinet: an analysis of where and why medications accumulate

Active pharmaceutical ingredients (APIs) from medications can enter the environment as trace contaminants, at individual concentrations generally below a part per billion (microg/L). APIs enter the environment primarily via the discharge of raw and treated sewage. Residues of unmetabolized APIs from parenteral and enteral drugs are excreted in feces and urine, and topically applied medications are washed from skin during bathing. These trace residues may pose risks for aquatic life and cause concern with regard to subsequent human exposure. APIs also enter the environment from the disposal of unwanted medications directly to sewers and trash. The relative significance of this route compared with excretion and bathing is poorly understood and has been subject to much speculation. Two major aspects of uncertainty exist: the percentage of any particular API in the environment originating from disposal is unknown, and disposal undoubtedly occurs from a variety of dispersed sources. Sources of disposal, along with the types and quantities of APIs resulting from each source, are important to understand so that effective pollution prevention approaches can be designed and implemented. Accumulation of leftover, unwanted drugs poses three major concerns: (i) APIs disposed to sewage or trash compose a diverse source of potential chemical stressors in the environment. (ii) Accumulated drugs represent increased potential for drug diversion, with its attendant risks of unintentional poisonings and abuse. (iii) Leftover drugs represent wasted healthcare resources and lost opportunities for medical treatment. This paper has four major purposes: (1) Define the processes, actions, and behaviors that control and drive the consumption, accumulation, and need for disposal of pharmaceuticals. (2) Provide an overview of the diverse locations where drugs are used and accumulate. (3) Present a summary of the first cataloging of APIs disposed by a defined subpopulation. (4) Identify opportunities for pollution prevention and source reduction.     

Treatment of uncertainty and developing conceptual models for environmental risk assessments and radioactive waste disposal safety cases

The common approach to performing quantitative risk assessments in the contaminated land industry in the UK lacks a formal methodology for the treatment of the full range of uncertainties and for documenting decisions regarding the development of conceptual models and the selection of computer codes. The approach presented here represents an alternative, more detailed, and systematic approach for developing conceptual models and addressing uncertainties when undertaking contaminated land risk assessments. It is intended that the advantages of this approach are recognised by practitioners in the contaminated land industry and adopted, where appropriate, to help improve the quality of contaminated land risk assessments. The identification of features, events, and processes (FEPs) has been applied to safety assessments of deep geological and near-surface disposal of radioactive wastes. One of the primary benefits of using this approach is in the development of conceptual models. The approach identifies the FEPs that need to be addressed during the development of conceptual models and in the selection of suitable computer codes that can be used to represent the conceptual models. This approach has been applied by BNFL at the low-level radioactive waste disposal site at Drigg in Cumbria and is currently being adopted for a contaminated land study at the Sellafield site, also in Cumbria. This paper presents the advantages of using FEPs in the development of conceptual models and the treatment of uncertainties. The paper also discusses the application of this approach to contaminated land studies and provides an example to demonstrate the application of the approach. BNFL's approach at the Drigg site involves the identification of components (features) and phenomena (events and processes) that govern interactions and dependencies between the components by arranging them in a matrix format.     

Testing a tridimensional model of sustainable behavior: self-care,caring for others,and caring for the planet

This paper investigates the dimensions of sustainable behavior, with a particular focus on the aspects of self-care, caring for others, and caring for the environment. Its aim was to test the assumption that sustainable behavior not only encompasses pro-social and pro-environmental actions, as the current research acknowledges, but also behaviors that are directed toward self-preservation and care. A subscale of self-care specifically developed for this research was added to a series of previously validated instruments assessing altruistic, equitable, pro-ecological, and frugal behaviors to examine the personal, social, and physical environmental aspects of sustainable behavior. Responses from a sample of 290 participants confirmed the three-dimensional structure of sustainable behavior. Results suggest sustainability, understood as a chain of interdependences between the individual, society, and nature, begins with self-care and continues with caring for others, and with caring for the biosphere, which, in turn, affords for a more sustainable environment for the individual.

     

Linking health and ecology in the medical curriculum

Human health vulnerabilities to ecosystem degradation are well documented. Destabilization of natural ecosystems and the biosphere have posed an entirely new set of risks to human health and preclude any simple extrapolations from the past. Newly emerging diseases, increasing prevalence of many vector borne diseases, increased exposure to harmful UV radiation and a number of other transformations in the natural environment, have decidedly negative implications for the sustainability of human health. Curricula in medical schools are responding to these new realities by exposing the connections between health and ecology. The program in Ecosystem Health at the University of Western Ontario serves as one model for connecting these disciplines. This program has resulted in a perceptible shift in values and professional responsibilities of emerging physicians.     

Dwelling in the biosphere: exploring an embodied human–environment connection in resilience thinking

Resilience has emerged as a prominent paradigm for interpreting and shaping human–environment connections in the context of global environmental change. Resilience emphasizes dynamic spatial and temporal change in social–ecological systems where humans are inextricably interwoven with the environment. While influential, resilience thinking has been critiqued for an under-theorized framing of socio-cultural dynamics. In this paper, we examine how the resilience concepts of planetary boundaries and reconnecting to the biosphere frame human–environment connection in terms of mental representations and biophysical realities. We argue that focusing solely on mental reconnection limits further integration between the social and the ecological, thus countering a foundational commitment in resilience thinking to social–ecological interconnectedness. To address this susceptibility we use Tim Ingold’s ‘dwelling perspective’ to outline an embodied form of human–environment (re)connection. Through dwelling, connections are not solely produced in the mind, but through the ongoing interactivity of mind, body and environment through time. Using this perspective, we position the biosphere as an assemblage that is constantly in the making through the active cohabitation of humans and nonhumans. To illustrate insights that may emerge from this perspective we bring an embodied connection to earth stewardship, given its growing popularity for forging local to global sustainability transformations.     

GIS与SDM集成构建土地定级专家信息系统的研究

提出将GIS与SDM技术集成应用于土地定级信息系统建设,介绍了GIS与SDM集成的基本框架。设计开发了一个基于GIS和SDM技术的土地定级专家信息系统,系统采用决策树方法作为数据挖掘方法的基本算法,通过决策树训练与学习相结合挖掘土地定级规则,运用专家系统推力技术进行匹配推理实现土地定级工作。结合武汉市商业用地类型土地定级实例数据对系统性能进行了验证。结果表明,系统具有良好的移植性、复用性、扩展性和广泛适应性的特点,运用此技术能较好地解决土地定级这种具有半结构和非结构化特点的问题。