Polycyclic aromatic hydrocarbons in soils from Urumqi, China: distribution, source contributions, and potential health risks

Concentrations of 16 priority polycyclic aromatic hydrocarbons (PAHs) were measured in 28 surface soils samples collected from Urumqi, northwest China, for examination of distributions, source contributions, and potential health effects. The results indicated that the sum of 16 PAHs concentration ranged from 331 to 15,799 μg?kg^?1 (dw) in soils, with a mean of 5,018?±?4,896 μg?kg^?1 (n?=?28). The sum of seven carPAHs concentration ranged from 4 to 1,879 μg?kg^?1 (dw; n?=?28). The highest ∑PAHs concentrations were found at roadsides and industrial sites, followed by those at parks, rural areas, and business/residential areas. Coal combustion, emission of diesel and gasoline from vehicles, and petroleum source were four sources of PAHs as determined by PMF analysis, which contributed 51.19, 19.02, 18.35, and 11.42 % to the PAH sources, respectively. Excellent coefficients of correlation between the measured and predicted PAHs concentrations suggested that the PMF model was very effective to estimate sources of PAHs in soils. Incremental lifetime cancer risk values at the 95th percentile due to human exposure to surface soils PAHs in Urumqi were 2.02?×?10^?6 for children and 2.72?×?10^?5 for adults. The results suggested that the current PAHs levels in soils from Urumqi were pervasive and moderately carcinogenic to children and adults.     

Hazard assessment of metals in invasive fish species of the Yamuna River,India in relation to bioaccumulation factor and exposure concentration for human health implications

Monitoring of heavy metals was conducted in the Yamuna River considering bioaccumulation factor, exposure concentration, and human health implications which showed contamination levels of copper (Cu), lead (Pb), nickel (Ni), and chromium (Cr) and their dispersion patterns along the river. Largest concentration of Pb in river water was 392 μg L^?1; Cu was 392 μg L^?1 at the extreme downstream, Allahabad and Ni was 146 μg L^?1 at midstream, Agra. Largest concentration of Cu was 617 μg kg^?1, Ni 1,621 μg kg^?1 at midstream while Pb was 1,214 μg kg^?1 at Allahabad in surface sediment. The bioconcentration of Cu, Pb, Ni, and Cr was observed where the largest accumulation of Pb was 2.29 μg kg^?1 in Oreochromis niloticus and 1.55 μg kg^?1 in Cyprinus carpio invaded at Allahabad while largest concentration of Ni was 174 μg kg^?1 in O. niloticus and 124 μg kg^?1 in C. carpio in the midstream of the river. The calculated values of hazard index (HI) for Pb was found more than one which indicated human health concern. Carcinogenic risk value for Ni was again high i.e., 17.02?×?10^?4 which was larger than all other metals studied. The results of this study indicated bioconcentration in fish due to their exposures to heavy metals from different routes which had human health risk implications. Thus, regular environmental monitoring of heavy metal contamination in fish is advocated for assessing food safety since health risk may be associated with the consumption of fish contaminated through exposure to a degraded environment.     

Application of zirconium–iridium permanent modifier for the simultaneous determination of lead, cadmium, arsenic, and nickel in atmospheric particulate matter by multi-element electrothermal atomic absorption spectrometry

A novel and robust method for the simultaneous determination of lead, cadmium, arsenic, and nickel in atmospheric particulate matter by multi-element electrothermal atomic absorption spectrometry was developed, using zirconium–iridium coating as permanent modifier (140 μg Zr and 4 μg Ir). After 300 atomization cycles, it was necessary to add 2 μg of Ir. Due to the varying concentrations of Pb in atmospheric particulate matter, lead was monitored at two wavelengths, at the less sensitive line of 261.4 nm for high concentration samples (>20 μg?L^?1) or at 283.3 nm for the low concentration samples. Matrix-matched calibration had to be performed for quantitative recoveries (96–102 %). Following this approach, the four elements were determined in atmospheric particulate matter samples from an industrial area near the city of Athens in two different time periods (cold–warm) with limits of detection of 5.5 ng?m^?3 for Pb at 261.4 nm and 0.29 ng?m^?3 at 283.3 nm, 0.019 ng?m^?3 for Cd, 0.14 ng?m^?3 for As, and 0.22 ng?m^?3 for Ni. Lead, Cd, and As levels were very low, whereas Ni content was at comparable levels with other areas worldwide.     

Evaluation of optimal conditions for determination of low selenium content in shellfish samples collected at Todos os Santos Bay,Bahia, Brazil using HG-AFS

This work proposes a procedure for the determination of total selenium content in shellfish after digestion of samples in block using cold finger system and detection using atomic fluorescent spectrometry coupled hydride generation (HG AFS). The optimal conditions for HG such as effect and volume of prereduction KBr 10 % (m/v) (1.0 and 2.0 ml) and concentration of hydrochloric acid (3.0 and 6.0 mol L^?1) were evaluated. The best results were obtained using 3 mL of HCl (6 mol L^?1) and 1 mL of KBr 10 % (m/v), followed by 30 min of prereduction for the volume of 1 mL of the digested sample. The precision and accuracy were assessed by the analysis of the Certified Reference Material NIST 1566b. Under the optimized conditions, the detection and quantification limits were 6.06 and 21.21 μg kg^?1, respectively. The developed method was applied to samples of shellfish (oysters, clams, and mussels) collected at Todos os Santos Bay, Bahia, Brazil. Selenium concentrations ranged from 0.23?±?0.02 to 3.70?±?0.27 mg kg^?1 for Mytella guyanensis and Anomalocardia brasiliana, respectively. The developed method proved to be accurate, precise, cheap, fast, and could be used for monitoring Se in shellfish samples.     

Dissipation kinetics and assessment of processing factor for chlorpyrifos and lambda-cyhalothrin in cardamom

The dissipation kinetics and method for estimation of residues of chlorpyrifos and lambda-cyhalothrin in cardamom were studied and developed. The limit of detection and limit of quantitation arrived for the compounds were 0.01 and 0.025 μg?g^?1, respectively. Gas chromatographic response of chlorpyrifos and lambda-cyhalothrin residues was linear in the range of 0.01–0.50 μg?g^?1 and the mean recovery obtained was 97.3 % for chlorpyrifos and 98.9 % for lambda-cyhalothrin with satisfactory relative standard deviation values. The mean initial residues of chlorpyrifos applied at a concentration of 0.05 % in cardamom was 2.5 μg?g^?1 and the residue was 8.1 μg?g^?1 after processing, with a processing factor of 3.24, while lambda-cyhalothrin when applied at 0.0025 % resulted in initial residues of 1.63 μg?g^?1 that magnified to 4.86 μg?g^?1 on curing, with a processing factor of 2.98. The half-life of chlorpyrifos was in the range of 5.1–5.24 days while that of lambda-cyhalothrin was in the range of 4.40–4.55 days. The processing factor arrived at in the above experiment lead to the conclusion that the residues of chlorpyrifos got magnified to 3.24–3.68 times and that of lambda-cyhalothrin got magnified to 2.98–3.46 times of initial residues, consequent to loss of weight due to dehydration during curing.     

The high potential of Pelargonium roseum plant for phytoremediation of heavy metals

The major objective of this investigation was to evaluate the potential of scented geraniums, Pelargonium roseum, to uptake and accumulate heavy metals nickel (Ni), cadmium (Cd), or lead (Pb). For this, plants were grown in an artificial soil system and exposed to a range of metal concentrations over a 14-day treatment period. Then, metals from the entire biomass were extracted. The results showed that scented geranium plants accumulated in excess of 20,055 mg of Ni kg^?1 dry weight (DW) of root and 10,889 mg of Ni kg^?1 DW of shoot, and in excess of 86,566 mg of Pb kg^?1 DW for roots and 4,416 mg of Pb kg^?1 DW for shoots within 14 days. Also, the uptake and accumulation of cadmium in roots of scented geranium plants increased with the exposure at low (250, 500 mg?L^?1) and medium level (750 mg?L^?1) followed by a decline at the highest level (1,000 mg?L^?1). The highest accumulation in roots (31,267 mg?kg^?1 DW) was observed in 750 mg?L^?1 cadmium treatment. In the shoots of scented geraniums, the highest amount of metal accumulation (1,957 mg?kg^?1 DW) was detected at 750 and 1,000 mg?L^?1 of cadmium in the culture solution. Finally, since the high concentrations of Ni or Pb accumulated in shoots of scented geranium has far exceeded 0.1 % DW and for Cd has far exceeded 0.01 % DW, P. roseum is a new hyperaccumulator species for these metals and can be used in phytoremediation industry.     

The levels and composition of persistent organic pollutants in alluvial agriculture soils affected by flooding

The concentrations and composition of persistent organic pollutants (POPs) were determined in alluvial soils subjected to heavy flooding in a rural region of Poland. Soil samples (n?=?30) were collected from the upper soil layer from a 70-km² area. Chemical determinations included basic physicochemical properties and the contents of polychlorinated biphenyls (PCBs), hexachlorocyclohexanes (HCHs), dichlorodiphenyltrichloroethanes (DDTs) and polycyclic aromatic hydrocarbons (PAHs, 16 compounds). The median concentrations of Σ7PCB (PCB28?+?PCB52?+?PCB101?+?PCB118?+?PCB138?+?PCB153?+?PCB180), Σ3HCH (α-HCH?+?β-HCH?+?γ-HCH) and Σ3pp′(DDT?+?DDE?+?DDD) were 1.60?±?1.03, 0.22?±?0.13 and 25.18?±?82.70 μg kg^?1, respectively. The median concentrations of the most abundant PAHs, phenanthrene, fluoranthene, pyrene, benzo[b]fluoranthene and benzo[a]pyrene were 50?±?37, 38?±?27, 29?±?30, 45?±?36 and 24?±?22 μg kg^?1, respectively. Compared with elsewhere in the world, the overall level of contamination with POPs was low and similar to the levels in agricultural soils from neighbouring countries, except for benzo[a]pyrene and DDT. There was no evidence that flooding affected the levels of POPs in the studied soils. The patterns observed for PAHs and PCBs indicate that atmospheric deposition is the most important long-term source of these contaminants. DDTs were the dominant organochlorine pesticides (up to 99 %), and the contribution of the parent pp′ isomer was up to 50 % of the ΣDDT, which indicates the advantage of aged contamination. A high pp′DDE/pp′DDD ratio suggests the prevalence of aerobic transformations of parent DDT. Dominance of the γ isomer in the HCHs implies historical use of lindane in the area. The effect of soil properties on the POP concentrations was rather weak, although statistically significant links with the content of the <0.02-mm fraction, C_total or N_total were observed for some individual compounds in the PCB group.     

Rapid spectrophotometric determination of trace amounts of palladium in water samples after dispersive liquid–liquid microextraction

A simple, rapid, and efficient dispersive liquid–liquid microextraction method, followed by UV–Vis spectrophotometry was developed for the preconcentration and determination of Pd ions in water samples. Pd ions react with α-furildioxime (chelating agent) to form a hydrophobic complex. Various parameters were altered to study and optimize their effects on the extraction efficiency, such as pH, ligand concentration, the type and volume of extraction and dispersive solvents, extraction time, and salt concentration. Under optimized conditions, the method exhibited an enrichment factor (C _org/C _aq) of 25 and recovery more than 98 % within a very short extraction time. The linearity of the method ranged from 10 to 200 μg?L^?1. The limit of detection was 1.1 μg?L^?1. The relative standard deviation for the concentration of 100 μg?L^?1 of Pd was 2.3 % (n?=?10). Finally, the developed method was successfully applied to the extraction and determination of Pd in tap, river, mineral, and sea water samples.     

Affects of mining activities on Cd pollution to the paddy soils and rice grain in Hunan province, Central South China

Located in Central South China, Hunan province is rich in mineral resources. To study the influence of mining on Cd pollution to local agricultural eco-system, the paddy soils and rice grain of Y county in northern Hunan province were intensively monitored. The results were as follows: (1) Total Cd (T-Cd) content in the soils of the county ranges from 0.13 to 6.02 mg kg^?1, with a mean of 0.64 mg kg^?1, of which 57.5 % exceed the allowable limit specified by the China Soil Environmental Quality Standards. T-Cd in the soils varies largely, with the coefficient of variation reaching 146.4 %. The spatial distribution of T-Cd in the soils quite matches with that of mining and industries. The content of HCl-extractable Cd (HCl-Cd) in the soils ranges from 0.02 to 2.17 mg kg^?1, with a mean of 0.24 mg kg^?1. A significant positive correlation exists between T-Cd and HCl-Cd in the soils (r?=?0.770, ρ?<?0.01). (2) Cd content in the rice produced in Y county ranges from 0.01 to 2.77 mg kg^?1, with a mean of 0.46 mg kg^?1. The rate of rice with Cd exceeding the allowable limit specified by the Chinese Grain Security Standards reaches 59.6 %; that with Cd exceeding 1 mg kg^?1, called as “Cd rice,” reaches 11.1 %. (3) Cd content in the rice of Y county is positively significantly correlated with HCl-Cd (r?=?0.177, ρ?<?0.05) but not significantly with T-Cd in the soils (r?=?0.091, ρ?>?0.05), which suggests that the amount of Cd accumulating in the rice is more affected by its availability in the soils, rather than the total content. (4) The dietary intake of Cd via rice consumption in Y county is estimated to be 179.9 μg day^?1 person^?1 on average, which is far beyond the allowable limit specified by FAO/WHO and the target hazard quotients of Cd much higher than 1, suggesting the high risk on human health from Cd exposure.     

Total and inorganic arsenic in dietary supplement supplies in northern Mexico

The aim of this study was to evaluate the presence of total and inorganic arsenic in dietary supplements composed of herbal plants and seaweed, and to determine the potential toxicological risk. Total arsenic was determined by dry ashing and hydride generation atomic absorption spectrometry, and inorganic arsenic was determined by acid digestion, solvent extraction, and hydride generation atomic absorption spectrometry. Total and inorganic arsenic in the supplements ranged from 0.07 to 8.31 mg?kg^?1 dry weight and from 0.14 to 0.28 mg?kg^?1 dry weight, respectively. Daily intake of total arsenic ranged from 0.05 to 12.46 μg?day^?1. Inorganic arsenic intake ranged from 0.21 to 0.83 μg?day^?1, values that are below the Benchmark Dose Lower Confidence Limit recommended by the Word Health Organization. Therefore, there appears to be a low risk of adverse effects resulting from excess inorganic arsenic intake from these supplements. This is the first study conducted in Mexico that investigates total and inorganic arsenic in dietary supplements. Although the results do not suggest toxicological risk, it is nonetheless important considering the toxicity of inorganic arsenic and the increasing number consumer preferences for dietary supplements. Moreover, it is important to improve and ensure the safety of dietary supplements containing inorganic arsenic.     

Utility of cefixime as a complexing reagent for the determination of Ni(II) in synthetic mixture and water samples

A simple, sensitive, and accurate UV spectrophotometric method has been developed for the determination of nickel in synthetic mixture and water samples. The method is based on the complexation reaction of nickel ion with cefixime, thus leading to the formation of Ni–cefixime complex in ethanol-distilled water medium at room temperature. The complex showed the maximum absorption wavelength at 332 nm. Beer’s law is obeyed in the working concentration range of 0.447–4.019 μg?mL^?1 with apparent molar absorptivity of 7.314?×?10³?L?mol^?1?cm^?1 and Sandell’s sensitivity of 0.008 μg/cm²/0.001 absorbance unit. The limits of detection and quantitation for the proposed method are 0.016 and 0.054 μg?mL^?1, respectively. The factors such as cefixime concentration and solvent affecting the complexation reaction were carefully studied and optimized. The method is validated as per the International Conference on Harmonisation guideline. The method is successfully applied to the determination of Ni(II) in synthetic mixture and wadi water samples collected from Al Rustaq. The same water samples are also analyzed by atomic absorption spectrophotometry. Both methods determined the amount of Ni(II) in water sample and found to be approximately the same.     

Insecticide residues in soil and water in coastal areas of vegetable production in Togo

Some common organochlorine, organophosphorus and pyrethroid insecticides were analysed in agricultural soil samples (n?=?35) and surface water and groundwater samples (n?=?25) collected from coastal areas of vegetable production in Togo. Analytical methods included solvent extraction of the insecticide residues and their subsequent quantification using GC-ECD. δ-HCH, heptachlor epoxide, 4,4-DDE, endosulphan (α, β and sulphate), lambda-cyalothrin and chlorpyrifos were found in the soil samples with concentrations that varied from non-detectable (ND) to 26.93 μg kg^?1 dry weight. For water samples, heptachlor epoxide, 2,4-DDD, 4,4-DDD, 4,4-DDE and endosulphan (α, β, and sulphate) were found at contamination levels that varied from ND to 0.116 μg L^?1. The concentration of insecticide residues detected in the water samples was below the limits set by the World Health Organization (WHO) and also by the European Union (EU), with the exception of the concentration of endosulphan sulphate at the Aného site, which was 0.116 μg L^?1.     

Effect of citric acid on metals mobility in pruning wastes and biosolids compost and metals uptake in <Emphasis Type="Italic">Atriplex halimus</Emphasis> and <Emphasis Type="Italic">Rosmarinus officinalis</Emphasis>

To assess metal mobility in pruning waste and biosolids compost (pH?6.9 and total concentration of metals in milligram per kilogram of Cd 1.9, Cu 132, Fe 8,513, Mn 192, Pb 81, and Zn 313), shrubs species Atriplex halimus and Rosmarinus officinalis were transplanted in this substrate and irrigated with citric acid (4 g?L^?1, pH?2.9) and nutrient solution daily for 60 days. Citric acid significantly increased the concentrations of soluble Mn and Fe in the nutrient substrate solution measured by suction probes, while other metals did not vary in concentration (Cu and Zn) or were not observed at detectable levels (Cd and Pb). In plants, citric acid significantly increased the concentrations of Cu (2.7?±?0.1–3.3?±?0.1 mg?kg^?1), Fe (49.2?±?5.2–76.8?±?6.8 mg?kg^?1), and Mn (7.2?±?1.1–11.4?±?0.7 mg?kg^?1) in leaves of R. officinalis, whereas the concentration of only Mn (25.4?±?0.3–42.2?±?2.9 mg?kg^?1) was increased in A. halimus. Increasing Fe and Mn solubility by citric acid addition indicates the possibility of using it to improve plant nutrition. The mobility of metals in this substrate was influenced for the concentration of the metal, the degree of humification of organic matter and its high Fe content.     

Dissipation and residues of bispyribac-sodium in rice and environment

The dissipation and residues of bispyribac-sodium in rice cropping system were studied. Bispyribac-sodium residues were extracted by a simple analytical method based on QuEChERs and detected by LC-MS/MS. The limit of detection for bispyribac-sodium of this method was 0.375?×?10^?3 ng. The limit of quantification (LOQ) was 5.0 μg/kg for rice plant samples, 2.0 μg/kg for rice hull, 0.2 μg/kg for water, and 0.1 μg/kg for soil and husked rice samples. The average recoveries of bispyribac-sodium ranged from 74.7 to 108 %, with relative standard deviations less than 13 %. The half-lives of bispyribac-sodium in rice plant, water, and soil were in the range of 1.4–5.6 days. More than 90 % of bispyribac-sodium residue dissipated within 5 days. The final residues of bispyribac-sodium in rice were all below LOQ at harvest time.     

The use of silica gel modified with allyl 6-methyl-4-phenyl-2-thioxo-1,2,3,4-tetrahydropyrimidine-5-carboxylate for selective separation and preconcentration of lead in environmental samples

The aim of the present work is the assessment of a new sorbent, prepared using silica gel coated with a pyrimidine derivative (allyl 6-methyl-4-phenyl-2-thioxo-1,2,3,4-tetrahydropyrimidine-5-carboxylate), for extraction and preconcentration trace amount of lead from different samples prior to determination by flame atomic absorption spectrometry. Common coexisting ions did not interfere with the separation and determination of lead at pH?6, so that lead ion completely adsorbed on the column. The limit of detection based on three times the standard deviation of the blank was found to be 0.53 ng?mL^?1 in original solution. Obtained sorption capacity for 1 g sorbent was 5.0 mg Pb. The linearity was maintained in the concentration range of 0.1–30.0 ng?mL^?1 for the concentrated solution. Eight replicate determinations of 2.0 μg?mL^?1 of lead in the final solution gave relative standard deviation of ±2.6 %. The proposed method was successfully applied to the determination trace amounts of lead in the environmental samples such as carrot, rice, zardchoobe, and real water samples.     

Dissipation and residue behavior of mepiquat on wheat and potato field application

A modified LC-MS method for the analysis of mepiquat residue in wheat, potato, and soil was developed and validated. A hydrophilic interaction liquid chromatographic column has been successfully used to retain and separate the mepiquat. Mepiquat residue dynamics and final residues in supervised field trials at Good Agricultural Practice (GAP) conditions in wheat, potato, and soil were studied. The limits of quantification for mepiquat in all samples were all 0.007 mg kg^?1, which were lower than their maximum residue limits. At fortification levels of 0.04, 0.2, and 2 mg kg^?1 in all samples, recoveries ranged from 77.5 to 116.4 % with relative standard deviations of 0.4–7.9 % (n?=?5). The dissipation half-lives (T _1/2) of mepiquat in soil (wheat), wheat plants, soil (potato), and potato plants were 4.5–6.3, 3.0–5.6, 2.2–4.6, and 2.4–3.2 days, respectively. The final residues of mepiquat were below 0.153 mg kg^?1 in soil (wheat), 0.052–1.900 mg kg^?1 in wheat, below 0.072 mg kg^?1 in soil (potato), and below 1.173 mg kg^?1 in potato at harvest time. Moreover, pesticide risk assessment for all the detected residues was conducted. A maximum 0.0012 % of acceptable daily intake (150 mg kg^?1) for national estimated daily intake indicated low dietary risk of these products.     

Temporal variability in water quality parameters—a case study of drinking water reservoir in Florida, USA

Our objective was to evaluate changes in water quality parameters during 1983–2007 in a subtropical drinking water reservoir (area: 7 km²) located in Lake Manatee Watershed (area: 338 km²) in Florida, USA. Most water quality parameters (color, turbidity, Secchi depth, pH, EC, dissolved oxygen, total alkalinity, cations, anions, and lead) were below the Florida potable water standards. Concentrations of copper exceeded the potable water standard of <30 μg?l^?1 in about half of the samples. About 75 % of total N in lake was organic N (0.93 mg?l^?1) with the remainder (25 %) as inorganic N (NH₃-N: 0.19, NO₃-N: 0.17 mg?l^?1), while 86 % of total P was orthophosphate. Mean total N/P was <6:1 indicating N limitation in the lake. Mean monthly concentration of chlorophyll-a was much lower than the EPA water quality threshold of 20 μg?l^?1. Concentrations of total N showed significant increase from 1983 to 1994 and a decrease from 1997 to 2007. Total P showed significant increase during 1983–2007. Mean concentrations of total N (n?=?215; 1.24 mg?l^?1) were lower, and total P (n?=?286; 0.26 mg?l^?1) was much higher than the EPA numeric criteria of 1.27 mg total N l^?1 and 0.05 mg total P l^?1 for Florida’s colored lakes, respectively. Seasonal trends were observed for many water quality parameters where concentrations were typically elevated during wet months (June–September). Results suggest that reducing transport of organic N may be one potential option to protect water quality in this drinking water reservoir.     

Polycyclic aromatic hydrocarbons in urban soils of Hangzhou: status,distribution, sources,and potential risk

Concentration, composition profile, spatial distribution, sources, and health risk of 16 polycyclic aromatic hydrocarbons (PAHs) were analyzed in 69 surface soil samples collected from Hangzhou urban districts. ∑PAHs ranged from 180.77 to 1,981.45 μg kg^?1 with a mean of 611.28 μg kg^?1. Among different functional areas, a higher level of PAHs was found in the roadsides, followed by commercial districts, residential areas, parks, and greenbelts. The composition of PAHs was characterized by high molecular weight PAHs (4?~?6 rings). Principal component analysis (PCA) and PAH isomeric ratios indicated that PAHs mainly originated from combustion, especially vehicle exhaust. The incremental lifetime cancer risks (ILCRs) associated with exposures to PAHs in soil were calculated separately for children and adults under normal and extreme conditions. The results showed that ILCRs for urban soil of Hangzhou were acceptable. However, attentions should be attracted on the sites of high PAH concentrations because the ILCRs were closed to 10^?4 under extreme conditions, especially for children.     

Management of domoic acid monitoring in shellfish from the Catalan coast

Monitoring of amnesic shellfish poisoning (ASP) toxins in shellfish from the Catalan coast started in 2001. No ASP toxins were detected in any of the analyses performed before 2008. On 22 January 2008, domoic acid (DA) was detected in Donax trunculus (0.5 mg?kg^?1) and confirmed by rapid resolution liquid chromatography–tandem mass spectrometry (0.6 mg?kg^?1). A total of 974 shellfish samples were analyzed from January 2008 to December 2011, covering all the Catalan production areas and the most important marketed species. DA was detected in 23.8 % of the samples and was recorded every month in all areas and all species, except Ostrea edulis, although the percentage of samples with DA and DA content varied widely among samples. DA exceeded the regulatory level of 20 mg?kg^?1 twice: in Callista chione sampled on February 2008 and in D. trunculus sampled on April 2010. DA content in Bolinus brandaris appeared constant and close to 4.5 mg?kg^?1 for months in 2009. Mytilus galloprovincialis, Crassostrea gigas, and Ruditapes sp. presented very low concentrations of DA in the Ebro Delta bays, despite 113 alert situations according to Pseudo-nitzschia spp. abundances and the high number of shellfish samples analyzed. The origin of DA in Catalan shellfish remains unknown.     

Cloud point extraction–atomic absorption spectrometry for pre-concentration and determination of cadmium in cigarette samples

A new complexing agent, 2-((2-((1H-benzo[d]imidazole-2yl)methoxy)phenoxy)methyl)-1H-benzo[d]imidazole (BIMPI), was used in cloud point extraction and applied for selective pre-concentration of trace amounts of cadmium in cigarette samples. Cadmium was complexed with BIMPI in a buffer solution (pH?=?10) using Triton X-114 as surfactant and quantitatively extracted into a small volume of the surfactant-rich phase after centrifugation. Under optimized conditions (pH?=?10.0, 0.8?×?10^?4?mol?L^?1 BIMPI and 0.08 % (w/v) Triton X-114), calibration graph was linear in the range of 34.0–1,670.0 μg?L^?1. The proposed method was applied to the determination of Cd in various cigarette (tobacco) samples which gave satisfactory results.