生物修复的新方法——菌根根际生物修复

本文介绍了菌根根际生物修复方法,讨论了菌根根际生物修复方法的理论依据、机理和优缺点,探讨了从引入固氮菌、外源细菌两个方面对菌根根际调控以提高修复效果的可能性。     

生物修复高氯酸盐污染的研究进展

生物修复技术是目前高氯酸盐污染环境整治的最具潜力的修复技术之一,具有成本低、无二次污染的特点,是国内外一个新的研究热点,亦是仅见的污染控制及修复的环境友好技术。介绍了环境中高氯酸盐污染的来源与分布,阐述了生物修复(主要包括植物修复和微生物修复)的特点及作用机制,认识到2种类型修复技术各有其优劣势;重点综述了生物修复高氯酸盐污染的国内外研究现状,得出植物根际降解对植物修复高氯酸盐起着十分重要作用,而微生物修复是目前最有希望获得大规模应用的高氯酸盐污染修复技术;最后提出了植物-微生物联合强化修复高氯酸盐污染的技术将更具应用前景。     

生物强化修复石油污染土壤

筛选高效石油降解菌,考察菌株的降解性能及降解机理,进行花盆模拟高效外源菌强化修复石油污染土壤实验,在降解后期添加激活剂H2O2以及木屑来试图改善微生物的修复环境,减缓微生物的衰亡,并考察修复效果。结果表明,菌株L-1的降解效果较好,其对pH和温度有较大范围的适应性,能分泌较多的表面活性物质,细胞疏水性较强。将其应用于土壤修复中,经过50 d的修复,石油残留率达到50.6%左右,生物强化比自然修复残留率降低了8%左右。在第45天添加激活剂能有效改善修复效果,70 d时添加外源菌的土样最小石油残留率达到37.9%。     

农药污染土壤的生物修复技术

本文综述了土壤农药有机污染的生物修复技术 ,重点分析了植物、微生物对土壤农药污染的修复机制以及影响因子 ,介绍了几种生物修复技术     

污染水体的生物修复技术研究进展

详细介绍了污染水体生物修复技术的特点 ,综述了近年来国内外水体生物修复技术的研究和应用现状 ,并评述了水体生物修复技术存在的问题以及污染水体生物修复的发展方向     

中原油田石油污染土壤原位生物修复技术实验研究

通过实验室选择性富集培养,从中原油田石油污染土壤中获得了能以中原原油为碳源快速生长的石油降解菌群。结合黑麦草（Ryegrass）和苜蓿（Alfalfa）,采用该降解菌群对原油污染土壤进行了原位生物联合修复实验。接入降解菌的实验区分种植黑麦草、种植苜蓿、未种植区,另设黑麦草区和空白区。经过99 d的生物修复,石油烃累计降...     

农药污染土壤的生物修复技术

本文综述了土壤农药有机污染的生物修复技术,重点分析了植物、微生物对土壤农药污染的修复机制以及影响因子,介绍了几种生物修复技术。     

石油污染的生物修复

简述了石油的组成、生物修复的概念及类型,对石油烃的微生物摄取、降解机制等进行了详细的论述，并且对生物修复在含有污染物处理方面的应用进行了讨论。     

水产养殖自身污染及其生物修复技术

介绍了生物修复的概念、水产养殖存在的自身污染问题及其主要生物修复技术.营养物污染、药物污染和底泥富集污染是水产养殖存在的主要自身污染问题;微生物修复、水生植物修复和水生动物修复是污染养殖水域生物修复的3种主要形式;微生物的有效性、生物入侵、二次污染、修复生物的季节性和非水生植物的利用等方面是实施生物修复应注意的主要方面.最后指出,推行清洁生产、实行生态养殖是水产养殖业可持续发展的出路.     

污染水体的生物修复技术研究进展

详细介绍了污染水体生物修复技术的特点，综述了近年来国内外水体生物修复技术的研究和应用现状，并评述了水体生物修复技术存在的问题以及污染水体生物修复的发展方向。     

Soil contamination by crude oil: impact on the mycorrhizosphere and on the revegetation potential of forest trees

In vitro and greenhouse biotests were carried out to study the effects of various concentrations of crude oil on the mycorrhizosphere and the ability of ectomycorrhizal fungi to colonise Norway spruce and poplar seedlings grown on contaminated soil. Ectomycorrhizal fungi grown in pure cultures showed a variety of reactions to crude oil, ranging from growth stimulation to total inhibition of growth, depending on the species of fungi. Germination of poplar and spruce seeds was not significantly affected. The growth of spruce seedlings was not affected by crude oil, whereas that of poplar seedlings was significantly reduced at high concentrations. None of the concentrations had any effect on the degree of ectomycorrhizal and endomycorrhizal colonisation of poplar. With spruce, however, the ectomycorrhizal fungi showed species-specific reactions to increasing concentrations, in accordance with the results of the pure culture test. The length of time between soil contamination and seeding affects both seedling growth and the mycorrhizal infection potential of the soil. The results confirm the importance of mycorrhizal fungi in the bioremediation of soils contaminated by crude oil.     

Biomarkers for monitoring efficacy of bioremediation by microbial inoculants

Bioaugmentation of contaminated sites with microbes that are adapted or genetically engineered for degradation of specific toxic compounds is an area that is currently being explored as a clean-up option. Biomarkers have been developed to track the survival and efficacy of specific bacteria that are used as inocula for bioremediation of contaminated soil. Examples of biomarkers include the luc gene, encoding firefly luciferase and the gfp gene, encoding the green fluorescent protein (GFP). The luc gene was used to tag different bacteria used for bioremediation of gasoline or chlorophenols. The bacteria were monitored on the basis of luciferase activity in cell extracts from soil. The gfp gene was also used to monitor bacteria during degradation of chlorophenol in soil, based on fluorescence of the GFP protein. Other biomarkers can also be used for monitoring of microbial inocula used for bioaugmentation of contaminated sites. The choice of biomarker and monitoring system depends on the particular site, bacterial strain and sensitivity and specificity of detection required.     

Bioremediation process on Brazil shoreline

GOAL, SCOPE AND BACKGROUND: Bioremediation technique can be considered a promising alternative to clean oil spills using microbial processes to reduce the concentration and/or the toxicity of pollutants. To understand the importance of this work we must know that there is only little research performed to date using bioremediation techniques to clean oil spills in tropical countries. So, the main objective of this work is to analyze the behavior of a laboratory's bioremediation test using nutrients on coastal sediments. METHODS: The bioremediation process is followed through geochemical analysis during the tests. This organic material is analyzed by medium pressure liquid chromatography (MPLC), gas chromatography/flame ionization detection (GC/FID) and gas chromatography/ mass spectrometry. By microbial counting, the number of total bacteria and degrading bacteria is determined during the experiments, in order to confirm the effectiveness of the bioremediation process. The seawater obtained throughout the bioremediation process is analyzed for nutrients grade (phosphate and ammonium ions) and also for its toxicity (Microtox tests) due the presence of hydrocarbons and fertilizer. RESULTS: The results from the geochemical analyses of the oil show a relative decrease in the saturated hydrocarbon fraction that is compensated by a relative enrichment on polar compounds. It's confirmed by the fingerprint evaluation where it is possible to see a complete reduction of the normal alkanes followed by isoprenoids. Seawater analysis done by toxicity and nutrients analysis, such as microbial counting (total and degrading bacteria), confirm the fertilizer effectiveness during the bioremediation process. DISCUSSION: Results from simulating test using NPK, a low-price plant fertilizer, suggest that it's able to stimulate the degradation process. Results from medium pressure liquid chromatography (MPLC), done at two different depths (surface and subsurface), show different behavior during the biodegradation process where the later is seen to be more susceptible to microbial attack. Data from bioremediation unit shows a bigger reduction of the saturated fraction, followed by some smaller reduction of aromatic fractions, compensated by a relative increase from polar compounds (NSO). n-C17/pristane, n-C18/ fitane and pristane/fitane rates show constant values for the unity control, different from bioremediation samples which have a significant reduction, especially on subsurface areas, where a strong fall in the rates, seen to be reduced to zero over twenty days, had occurred during the first ten days. However, sample surfaces are reduced to zero in thirty days of experiments, proving that biodegradation is better on subsurfaces. Gaseous chromatography/mass spectrometry (CG/MS) analysis shows constant values to cyclic biomarker rates and aromatic compounds, suggesting that the biodegradation process is not strong enough to reduce these composites. Microbial analysis shows a reduction on heterotrophic (total bacteria) number from control unit, probably because the bacteria uses the spill oil like carbon source and energy. However, the number increases on bioremediation unit, because it uses NPK like a biostimulator. The hydrocarbonoclastic number isn't enough on the first moment, but it's detected after 30 days and quantified in all units, showing big values especially in bioremediation. Toxicity tests confirm that NPK fertilizer does not intoxicate the shoreline during the application of the bioremediation technique. Some nutrient concentration shows high values of ammonium and phosphate per bioremediation unit, reducing by the end of the experiment. CONCLUSIONS: Results reached the goal, finding a proper nutrient (NPK fertilizer) to stimulate the biodegradation process, growing bacteria responsible for reducing impact-contaminated coast ambient by oil spills. Chemical analysis of oil shows a reduction in the saturated fraction with a relative enrichment in polar composites (NSO) and the aromatic fraction from oil remaining constant. Subsurface samples show more biodegradation than surface samples, probably because the first one has higher humidity. Linear alcanes are more biodegraded than isoprenoids, confirming the biodegradation susceptibility order. Saturated cyclic biomarkers and aromatic compounds show constant behavior maybe because the nutrients or time was not enough for microorganismic attack. Fertilizer does not demonstrate any toxic effects in local biota so that it does not compromise the technique applicability and the environment is not saturated by nutrients during the simulation, especially since the coastal environment is an open system affected daily by tides. Therefore, bioremediation tests can be classified as moderate, reaching level 5 in the classification scale by Peters & Moldowan (1993). RECOMMENDATIONS AND PERSPECTIVES: The use of marine environment by the petroleum industry on exploration, production and transportation operation, transform this oil to become the most important pollutant in the oceans. Bioremediation is an important technique used to clean spilled oil impacting on shorelines, accelerating the biodegradation process by using fertilizer growing the microorganisms responsible for decontaminating the environment. We recommend confirming the efficiency of NPK nutrient used on bioremediation simulating experiments on beaches, while monitoring the chemical changes long-term. NPK fertilizer can be used to stimulate the biodegradation process on shoreline impacted by spilled oil.     

Means to improve the effect of in situ bioremediation of contaminated soil: an overview of novel approaches

Different aspects of bacterial degradation of organic contaminants in soil, and how to improve the efficiency and reproducibility is discussed in this review. Although bioremediation in principle includes the use of any type of organism in improving the condition of a contaminated site, most commonly bacteria are the degraders and other organisms, such as soil animals or plant roots, play a role in dissemination of bacteria and, indirectly, plasmids between bacteria, and in providing nutrients and co-substrates for the bacteria active in the degradation process. There are a number of different procedures that have been tested more-or-less successfully in attempts to improve reliability, cost efficiency and speed of bioremediation. The methods range from minimal intervention, such as mere monitoring of intrinsic bioremediation, through in situ introduction of nutrients and/or bacterial inocula or improvement of physico-chemical conditions, all the way to excavation followed by on site or ex situ composting in its different varieties. In the past the rule has been that more intervention (leading to higher costs) has been more reliable, but novel ideas are continuously tried out, both as a means to come up with new truly functional applications and also as a line of studies in basic soil microbial ecology. Both approaches generate valuable information needed when predicting outcome of remediation activities, evaluating environmental risks, deciding on cleaning-up approaches, etc. The emphasis of this review is to discuss some of the novel methods for which the value has not been clearly shown, but that in our view merit continued studies and efforts to make them work, separately or in combination.     

Advances and perspective in bioremediation of polychlorinated biphenyl-contaminated soils

In recent years, microbial degradation and bioremediation approaches of polychlorinated biphenyls (PCBs) have been studied extensively considering their toxicity, carcinogenicity and persistency potential in the environment. In this direction, different catabolic enzymes have been identified and reported for biodegradation of different PCB congeners along with optimization of biological processes. A genome analysis of PCB-degrading bacteria has led in an improved understanding of their metabolic potential and adaptation to stressful conditions. However, many stones in this area are left unturned. For example, the role and diversity of uncultivable microbes in PCB degradation are still not fully understood. Improved knowledge and understanding on this front will open up new avenues for improved bioremediation technologies which will bring economic, environmental and societal benefits. This article highlights on recent advances in bioremediation of PCBs in soil. It is demonstrated that bioremediation is the most effective and innovative technology which includes biostimulation, bioaugmentation, phytoremediation and rhizoremediation and acts as a model solution for pollution abatement. More recently, transgenic plants and genetically modified microorganisms have proved to be revolutionary in the bioremediation of PCBs. Additionally, other important aspects such as pretreatment using chemical/physical agents for enhanced biodegradation are also addressed. Efforts have been made to identify challenges, research gaps and necessary approaches which in future, can be harnessed for successful use of bioremediation under field conditions. Emphases have been given on the quality/efficiency of bioremediation technology and its related cost which determines its ultimate acceptability.     

Ecotoxicological evaluation of in situ bioremediation of soils contaminated by the explosive 2,4,6-trinitrotoluene (TNT)

To evaluate the environmental relevance of in situ bioremediation of contaminated soils, effective and reliable monitoring approaches are of special importance. The presented study was conducted as part of a research project investigating in situ bioremediation of topsoils contaminated by the explosive 2,4,6-trinitrotoluene (TNT). Changes in soil toxicity within different experimental fields at a former ordnance factory were evaluated using a battery of five bioassays (plant growth, Collembola reproduction, soil respiration, luminescent bacteria acute toxicity and mutagenicity test) in combination to chemical contaminant analysis. Resulting data reveal clear differences in sensitivities between methods with the luminescent bacteria assay performed with soil leachates as most sensitive toxicity indicator. Complete test battery results are presented in so-called soil toxicity profiles to visualise and facilitate the interpretation of data. Both biological and chemical monitoring results indicate a reduction of soil toxicity within 17 months of remediation.     

降解菌对堆肥中多环芳烃降解作用的研究

通过在堆肥中加入经过驯化的降解菌这种土壤有机污染生物修复技术 ,对堆肥中多环芳烃的浓度变化进行监测 ,从而了解降解菌对堆肥中多环芳烃的降解作用。实验结果表明 ,降解菌的加入能明显地提高多环芳烃的降解率 ,本次实验中 ,菲、芴的去除率提高了 2 5 %左右 ,芘的去除率提高了约 4 5 %。     

石油污染土壤的生物修复室内模拟实验研究

在实验室模拟的条件下,利用从克拉玛依的石油污染土壤中筛选出的4株高效降解菌,以石油烃降解率、脱氢酶活性、呼吸强度、微生物量碳氮和土壤毒性作为评价指标,研究不加生物菌剂不翻耕、不加生物菌剂翻耕、加生物菌剂不翻耕、加生物菌剂翻耕、加固定化菌剂不翻耕和加固定化菌剂翻耕6种不同实验条件对石油污染土壤修复的效果。结果表明,在63 d的修复过程中,加固定化菌剂翻耕实验F组的石油去除率达到了78.7%,比不加生物菌剂不翻耕实验A组的石油去除率提高了49.5%。随着土壤毒性逐渐降低,玉米(Zea mays L.)和赤子爱胜蚓(Eisenia fetida)可以在F组土壤中良好的生长,达到了修复的效果。     

电动力学技术强化原位生物修复研究进展

介绍了利用电动力学技术强化土壤及地下水原位生物修复的原理和最新进展。电动力学强化的基本原理是利用电渗析、电迁移和电泳等电动力学效应加速污染环境中有机污染物和微生物运动,注入营养物、电子受体或活性微生物,或者利用电极反应和电流热效应为地下生物降解创造有利条件。研究表明．电动力学技术能有效地强化原位生物修复,而且该技术不破环生态环境．安装和操作简单,成本低廉．有广泛的应用前景。     

土壤和沉积物中多氯联苯污染的生物修复机理研究进展

概述了多氯联苯 (PCBs)生物修复过程中影响因素和机理的研究进展 ,重点讨论了PCBs厌氧脱氯 ,好氧降解、真菌对PCBs降解、表面活性剂对PCBs降解的促进及抑制机理 ,以及完全矿化PCBs基因工程菌的构建 ,提出了今后工作展望