Influence of arsenic co-contamination on DDT breakdown and microbial activity

The impacts of arsenic co-contamination on the natural breakdown of 1,1,l1-trichloro-2,2-bis(4-chlorophenyl)ethane (DDT) in soil are investigated in a study of 12 former cattle dip sites located in northeastern NSW, Australia. This study examines the relationship between the intrinsic breakdown of DDT to 1,1 -dichloro-2,2-bis(4-chlorophenyl)ethane (DDD) and 1,l-dichloro-2,2-bis(4-chlorophenyl)ethylene (DDE), and the impacts of arsenic co-contamination on this breakdown. Between-site analysis demonstrated that arsenic at 2000 mg/kg gave a 50% reduction in the concentration of DDD compared to background arsenic of 5 mg/kg.Within-site analysis also showed the ratio of DDT:DDD increased in soils as arsenic concentrations increased. This within-site trend was also apparent with the DDT:DDE ratio, suggesting inhibition of DDT breakdown by arsenic co-contamination. Microbial activity was inhibited as residues of total DDTs and arsenic increased. Hence arsenic co-contamination and high concentrations of DDT in soil may result in an increased persistence of DDT in the environment studied.     

Remediation of DDT-contaminated water and soil by using pretreated iron byproducts from the automotive industry

The objective of this study was to quantify the effectiveness of different pretreated iron byproducts from the automotive industry to degrade DDT [(1,1,1-trichloro-2,2-bis(4-chlorophenyl) ethane] in aqueous solutions and soil slurry. Iron byproducts from automotive manufacturing were pretreated by three different methods (heating, solvent and 0.5N HCl acid washing) prior to experimentation. All pretreated irons were used at 5% (wt v-1) to treat 0.014 mM (5 mgL-1) of DDT in aqueous solution. Among the pretreated irons, acid pretreated iron results in the fastest destruction rates, with a pseudo first-order degradation rate of 0.364 d-1. By lowering the pH of the DDT aqueous solution from 9 to 3, destruction kinetic rates increase more than 20%. In addition, when DDT-contaminated soil slurry (3.54 mg kg-1) was incubated with 5% (wt v-1) acid-pretreated iron, more than 90% destruction of DDT was observed within 8 weeks. Moreover, DDT destruction kinetics were enhanced when Fe(II), Fe(III) or Al(III) sulfate salts were added to the soil slurry, with the following order of destruction kinetics: Al(III) sulfate > Fe(III) sulfate > Fe(II) sulfate. These results provide proof-of concept that inexpensive iron byproducts of the automotive industry can be used to remediate DDT-contaminated water and soil.     

Abiotic transformation of DDT in aqueous solutions

Significant concentrations of chlorinated pesticides such as 1,1,1-trichloro-2,2-bis(4-chlorophenyl)ethane (DDT) and its two main transformation products, 1,1-dichloro-2,2-bis(4-chlorophenyl)ethane (DDD) and 1,1-dichloro-2,2-bis(4-chlorophenyl)ethylene (DDE) are still present in soil and sediment systems more than 30 years after DDT use was banned in the United States. DDT enters waterways via the runoff from industrial point sources, agricultural lands and atmospheric deposition. We evaluated zero-valent iron (Fe(0)), ferrous sulfide (FeS), as well as combining them with hydrogen peroxide (H(2)O(2)) as viable treatment technologies for degrading DDT in an aqueous solution. Treatment of DDT with Fe(0) and FeS resulted in approximately 88% and 56% transformation of DDT within 150h, respectively. DDE production was insignificant in all systems. The DDT removal was slower with FeS than with Fe(0), but the amounts of DDD and DDE produced did not exceed baseline. Treatment with a 1:1 mixture of Fe(0)-FeS removed about 95% of the added mass of DDT within 4days and generated significant amounts of DDD and minor amounts of DDMU. When small amounts of H(2)O(2) were introduced halfway through the Fe(0) and FeS treatment times, the mass of DDT decreased by 87% and 96%, respectively, within 2days. Our results demonstrate that mixtures of Fe(0)-FeS in combination with H(2)O(2) can be used for rapid and efficient removal of DDT from aqueous solutions.     

Behaviour of DDT under laboratory and outdoor conditions in Germany

Abstract

Experiments were conducted on adsorption, volatilization and UV‐degradation of p,p'‐DDT on soil surface, and leaching and degradation in sand columns. p,p'‐DDT was shown to adsorb stronger to soils with higher organic content. UV irradiation at 290 nm for 10 hours mineralized less than 0.1% of DDT in soil.

Results show that only 0.1% of DDT volatilized in a sun‐exposed semi‐closed quartz system. Polar compounds accounted from 1.4% after 55 days. The rate of volatilization and degradation in an open system was much higher; only 15% DDT and 7% DDE were recovered after 6 weeks in the organic extract. p,p'‐DDT was adsorbed to a great extent on the top layers of sand columns; 86% in the top 8 cm.     

Remediation of DDT-Contaminated Water and Soil by Using Pretreated Iron Byproducts from the Automotive Industry

The objective of this study was to quantify the effectiveness of different pretreated iron byproducts from the automotive industry to degrade DDT [(1,1,1-trichloro-2,2-bis(4-chlorophenyl) ethane] in aqueous solutions and soil slurry. Iron byproducts from automotive manufacturing were pretreated by three different methods (heating, solvent and 0.5N HCl acid washing) prior to experimentation. All pretreated irons were used at 5% (wt v^{? 1}) to treat 0.014 mM (5 mgL^{? 1}) of DDT in aqueous solution. Among the pretreated irons, acid pretreated iron results in the fastest destruction rates, with a pseudo first-order degradation rate of 0.364 d^{? 1}. By lowering the pH of the DDT aqueous solution from 9 to 3, destruction kinetic rates increase more than 20%. In addition, when DDT-contaminated soil slurry (3.54 mg kg^{? 1}) was incubated with 5% (wt v^{? 1}) acid-pretreated iron, more than 90% destruction of DDT was observed within 8 weeks. Moreover, DDT destruction kinetics were enhanced when Fe(II), Fe(III) or Al(III) sulfate salts were added to the soil slurry, with the following order of destruction kinetics: Al(III) sulfate > Fe(III) sulfate > Fe(II) sulfate. These results provide proof-of concept that inexpensive iron byproducts of the automotive industry can be used to remediate DDT-contaminated water and soil.     

Remediation of DDTs contaminated soil in a novel Fenton-like system with zero-valent iron

Application of a novel Fenton-like system with zero-valent iron, EDTA and Air (ZVI/EDTA/Air) was investigated to degrade dichlorodiphenyltrichloroethane (DDT), dichlorodiphenyldichloroethane, and dichlorodiphenyldichloroethylene (DDE) in the actual contaminated soil from an organochlorine pesticide site. It was found DDTs in the soil were effectively degraded by the system at room temperature, ambient atmosphere pressure and near neutral pH. The dosages of EDTA and ZVI were the dominant factors influencing the removal of contaminants. An increase of EDTA from 0.05 to 0.2 mM and ZVI from 1 to 5 g L^?1 improved the removal of the contaminants significantly. However, excessive amount of EDTA led to a negative effect on the degradation process. Meanwhile, EDTA was simultaneously degraded so as to avoid the secondary pollution risk on soil remediation. Only a small amount of 4,4′-DDE and 2,2-bis(4-chlorophenyl)-1-chloroethylene (4,4′-DDMU) generated as the intermediates of DDT degradation during the process. Our investigation suggests that the Fenton-like system is a promising alternative for remediation of organochlorine pesticides contaminated soils.     

Fenton (H2O2/Fe) reaction involved in Penicillium sp. culture for DDT [1,1,1-trichloro-2,2-bis(p-chlorophenyl)ethane)] degradation

The purpose of this work was to demonstrate that a Fenton (H₂O₂/Fe) reaction was involved in DDT [1,1,1-trichloro-2,2-bis(p-chlorophenyl)ethane)] degradation in a culture of Penicillium sp. spiked with FeSO₄. A commercial DDT mixture (10% DDE [1,1-dichloro-2,2-bis(p-chlorophenyl)ethylene], 30% o,p-DDT and 60% of p,p′ -DDT) of 10 mg L^{? 1} was used. Hydrogen peroxide (H₂O₂), tartaric acid and oxalic acid were identified at 18 h in culture media, with and without added DDT; this correlated positively with lowering of pH from 5.8 to 2.7. Lower concentrations of oxalic acid and H₂O₂ (7.9 and 52.6 mg L^{? 1}, respectively) occurred in media with DDT at 30 h, in comparison to that one without DDT mixture (27.9 and 65.3 mg L^{? 1}, respectively), at this time there was maximum degradation (87.7, 91.7 and 94.2%) for DDE, o,p-DDT and p,p′-DDT, respectively. We propose that the degradation of the DDT mixture by Penicillium sp. was through a Fenton reaction (H₂O₂/Fe) under acidic conditions produced in situ during the fungal culture amended with FeSO₄.     

Halogenated compounds in a dated sediment core of the Teltow Canal, Berlin: time related sediment contamination

To study the recent contamination history of DDT (1,1,1-trichloro-2,2-bis(chlorophenyl)ethane) and its metabolites, as well as methoxychlor (1,1,1-trichloro-2,2-bis(p-methoxyphenyl)ethane), chlorfenson (4-chlorophenyl-p-chlorobenzenesulfonate), and further halogenated aromatics, a sediment core was collected from the Teltow Canal in Berlin (Germany). The sampling site is located nearby a former industrial point source, where recently analyses on pre-samples have indicated high concentrations of halogenated organic compounds. The deposition time of the investigated sediments was determined by gamma-spectrometrical dating. Pollution trends of selected contaminants were attributed to a time period between 5 and 10 years. Concentration profiles reflect not only the recent pollution history of these compounds, but also the time-depending effects of the ban, restriction and termination of DDT-production in the German Democratic Republic (GDR). DDT and other chlorinated aromatic compounds were produced onsite until the late 1980s. Maximum values of 133 mg kg(-1) (dry weight) for p,p'-DDD (1,1-dichloro-2,2-bis(chlorophenyl)ethane) and approximately 100 mg kg(-1) (dry weight) for p,p'-DDMS (1-chloro-2,2-bis(chlorophenyl)ethane), main metabolites of the anaerobic degradation of DDT, were determined. The occurrence of all selected contaminants, most of which have been banned more than 10 years ago, demonstrate recent contamination pathways, and the necessity of a continuous long-term monitoring of the affected environment.     

The complete dechlorination of DDT by magnesium/palladium bimetallic particles

The complete dechlorination of 1,1-bis(4-chlorophenyl)-2,2,2-trichloroethane (DDT) by a magnesium/palladium bimetallic system has been accomplished. The reaction takes place under ambient temperature and pressure and mild reaction conditions requiring only 0.25 g of magnesium and 0.3% palladium (wt/wt) to drive the dechlorination of 100 microg DDT (50 ppm in 2 ml). The process is both rapid and complete requiring less than 10 min to attain total dechlorination within the detection limit (approximately 10 pg for DDT) of electron capture detection gas chromatography (GC-ECD). The major product formed, as deduced from mass spectrometry (GC-MS) is the hydrocarbon skeleton, 1,1-diphenylethane. This technology may allow for the development of an economic and environmentally benign method of DDT remediation.     

Bioremediation of chlorinated pesticide–contaminated soil using anaerobic sludges and surfactant addition

Methanogenic granular sludge and wastewater fermented sludge were used as inocula for batch tests of anaerobic bioremediation of chlorinated pesticide contaminated soil. Results obtained for both types of biomass were similar: 80 to over 90% of γ -hexachlorocyclohexane (γ-HCH), 1,1,1-trichloro-2,2-bis-(4-methoxyphenyl)ethane (methoxychlor) and 1,1,1-trichloro-2,2-bis-(4-chlorophenyl)ethane (DDT) removed in 4–6 weeks. Residual fractions of these pesticides persisted till the end of the 16-week experiment. DDT was degraded through 1,1-dichloro-2,2-bis-(4-chlorophenyl)ethane (DDD). Accumulation of this product corresponded stoichiometrically only to 34–53% of removed DDT, supposedly due to its further transformations, finally resulting in formation of detected 4,4′-dichlorobenzophenone (DBP). Addition of 0.5 mM Tween 80 nonionic surfactant resulted in about a twofold decrease of γ -HCH and methoxychlor residual concentrations, as well as considerably lower DDD accumulation (7–29%) and higher DBP production. However, 1.25 mM dose of this surfactant applied together with granular sludge brought DDD levels back to that observed for treatments with the sludge alone, also impairing DBP formation.     

Bioremediation of diesel-contaminated soil with composting

The major objective of this research was to find the appropriate mix ratio of organic amendments for enhancing diesel oil degradation during contaminated soil composting. Sewage sludge or compost was added as an amendment for supplementing organic matter for composting of contaminated soil. The ratios of contaminated soil to organic amendments were 1:0.1, 1:0.3, 1:0.5, and 1:1 as wet weight basis. Target contaminant of this research was diesel oil, which was spiked at 10,000 mg/kg sample on a dry weight basis. The degradation of diesel oil was significantly enhanced by the addition of these organic amendments relative to straight soil. Degradation rates of total petroleum hydrocarbons (TPH) and n-alkanes were the greatest at the ratio of 1:0.5 of contaminated soil to organic amendments on wet weight basis. Preferential degradation of n-alkanes over TPH was observed regardless of the kind and the amount of organic amendments. The first order degradation constant of n-alkanes was about twice TPH degradation constant. Normal alkanes could be divided in two groups (C10-C15 versus C16-C20) based on the first order kinetic constant. Volatilization loss of TPH was only about 2% of initial TPH. Normal alkanes lost by volatilization were mainly by the compounds of C10 to C16. High correlations (r=0.80-0.86) were found among TPH degradation rate, amount of CO2 evolved, and dehydrogenase activity.     

Effects of long-term contamination of DDT on soil microflora with special reference to soil algae and algal transformation of DDT

DDT (1,1,1-trichloro-2,2-bis(p-chlorophenyl)ethane) and its principle metabolites, DDE (1,1-dichloro-2,2-bis(p-chlorophenyl)ethylene) and DDD (1,1-dichloro-2,2-bis(p-chlorophenyl)ethane) are widespread environmental contaminants but little information is available concerning their effects on non-target microflora (especially microalgae and cyanobacteria) and their activities in long-term contaminated soils. For this reason a long-term DDT-contaminated soil was screened for DDT residues and toxicity to microorganisms (bacteria, fungi, algae), microbial biomass and dehydrogenase activity. Also, five pure cultures isolated from various sites (two unicellular green algae and three dinitrogen-fixing cyanobacteria) were tested for their ability to metabolise DDT. Viable counts of bacteria and algae declined with increasing DDT contamination while fungal counts, microbial biomass and dehydrogenase activity increased in medium-level contaminated soil (27 mg DDT residues kg(-1) soil). All the tested parameters were greatly inhibited in high-level contaminated soil (34 mg DDT residues kg(-1) soil). Species composition of algae and cyanobacteria was altered in contaminated soils and sensitive species were eliminated in the medium and high contaminated soils suggesting that these organisms could be useful as bioindicators of pollution. Microbial biomass and dehydrogenase activity may not serve as good bioindicators of pollution since these parameters were potentially influenced by the increase in fungal (probably DDT resistant) counts. All the tested algal species metabolised DDT to DDE and DDD; however, transformation to DDD was more significant in the case of dinitrogen-fixing cyanobacteria.     

First compound-specific chlorine-isotope analysis of environmentally-bioaccumulated organochlorines indicates a degradation-relatable kinetic isotope effect for DDT

Compound-specific chlorine-isotope analysis (CSIA-Cl) of 1,1,1-trichloro-2,2-bis(p-chlorophenyl)ethane (p,p'-DDT) and 1,1-dichloro-2,2-bis(p-chlorophenyl)ethene (p,p'-DDE) in blubber from Baltic Grey seal (Halichoerus grypus) was performed in order to investigate if a kinetic isotope effect (KIE) could be observed concomitant to environmental degradation of DDT. The delta(37)Cl of p,p'-DDT and p,p'-DDE were -0.69 +/- 0.21 per thousand and -2.98 +/- 0.57 per thousand (1s igma, n = 3), respectively. Both samples were enriched relative to the hypothesized initial isotope composition (-4.34 per thousand), thus indicating a composite KIE associated with the degradation mechanisms pertaining to DDT. An isotope fractionation factor for degradation of dichloromethane, from the literature, was adapted and modified for use in the calculation of DDT degradation. A subsequent simplified Rayleigh distillation model of the DDT chlorine-isotope composition yielded an estimated fraction (f) of 7 +/- 2% of released DDT presently remaining as undegraded compound in the environment. The consistency between the result of the Rayleigh model (f approximately 7%) and the use of the DDT/(DDT + DDE) ratio as a measure of DDT degradation ( approximately 10% undegraded DDT) suggests that the KIE of DDT degradation may be significant, and that the novel approach of CSIA-Cl may be a valuable tool for degradation/persistence studies of lipophilic organochlorines in the environment.     

Biodegradation of 1,1,1-trichloro-2,2-bis(4-chlorophenyl) ethane (DDT) by using Serratia marcescens NCIM 2919

A solvent tolerant bacterium Serratia marcescens NCIM 2919 has been evaluated for degradation of DDT (1,1,1-trichloro-2,2-bis (4-chlorophenyl) ethane). The bacterium was able to degrade up to 42% of initial 50 mg L^?1 of DDT within 10 days of incubation. The highlight of the work was the elucidation of DDT degradation pathway in S. marcescens. A total of four intermediates metabolites viz. 2,2-bis (chlorophenyl)-1,1-dichloroethane (DDD), 2,2-bis (chlorophenyl)-1,1-dichloroethylene (DDE), 2,2-bis (chlorophenyl)-1-chloroethylene (DDMU), and 4-chlorobenzoic acid (4-CBA) were identified by GC-Mass and FTIR. 4-CBA was found to be the stable product of DDT degradation. Metabolites preceding 4-CBA were not toxic to strain as reveled through luxuriant growth in presence of varying concentrations of exogenous DDD and DDE. However, 4-CBA was observed to inhibit the growth of bacterium. The DDT degrading efficiency of S. marcescens NCIM 2919 hence could be used in combination with 4-CBA utilizing strains either as binary culture or consortia for mineralization of DDT. Application of S. marcescens NCIM 2919 to DDT contaminated soil, showed 74.7% reduction of initial 12.0 mg kg^?1 of DDT after 18-days of treatment.     

Biodegradation and speciation of residual SS-ethylenediaminedisuccinic acid (EDDS) in soil solution left after soil washing

This paper aims to investigate the degradation and speciation of EDDS-complexes (SS-ethylenediaminedisuccinic acid) in soil following soil washing. The changes in soil solution metal and EDDS concentrations were investigated for three polluted soils. EDDS was degraded after a lag phase of 7-11 days with a half-life of 4.18-5.60 days. No influence of EDDS-speciation on the reaction was observed. The decrease in EDDS resulted in a corresponding decrease in solubilized metals. Changes in EDDS speciation can be related to (1) initial composition of the soil, (2) temporarily anoxic conditions in the soil slurry after soil washing, (3) exchange of EDDS complexes with Cu even in soils without elevated Cu and (4) formation of NiEDDS. Dissolved organic matter is important for metal speciation at low EDDS concentrations. Our results show that even in polluted soils EDDS is degraded from a level of several hundred micromoles to below 1 microM within 50 days.     

Effects of thermal desorption on the composition of two coking plant soils: impact on solvent extractable organic compounds and metal bioavailability

To evaluate the efficiency and the influence of thermal desorption on the soil organic compartment, contaminated soils from coking plant sites (NM and H) were compared to their counterparts treated with thermodesorption. The extractable organic matter, and the metal content and distribution with soil compartments were studied.In both thermodesorbed soils, PAH (polycyclic aromatic hydrocarbon) degradation exceeded 90%. However, the thermal desorption led not only to a volatilization of the organic compounds but also to the condensation of extractable organic matter.The treatments only affected the Fe and Zn distribution within the more stable fractions, whereas the organic compound degradation did not affect their mobility and availability.     

Enhanced degradation of polycyclic aromatic hydrocarbons by biodegradation combined with a modified Fenton reaction

A study has been conducted to enhance degradation of a mixture of polycyclic aromatic hydrocarbons (PAHs) by combining biodegradation with hydrogen peroxide oxidation in a former manufactured gas plant (MGP) soil. An active bacterial consortium enriched from the MGP surface soil (0-2 m) biodegraded more than 90% of PAHs including 2-, 3-, and 4-ring hydrocarbons in a model soil. The consortium was also able to transform about 50% of 4- and 5-ring hydrocarbons in the MGP soil. As a chemical oxidant, Fenton's reagent (H2O2 + Fe2+) was very efficient in the destruction of a mixture of PAHs (i.e., naphthalene (NAP), fluorene (FLU), phenanthrene (PHE), anthracene (ANT), pyrene (PYR), chrysene (CHR), and benzo(a)pyrene (BaP)) in the model soil; noticeably, 84.5% and 96.7% of initial PYR and BaP were degraded, respectively. In the MGP soil, the same treatment destroyed more than 80% of 2- and 3-ring hydrocarbons and 20-40% of 4- and 5-ring compounds. However, the low pH requirement (pH 2-3) for optimum Fenton reaction made the process incompatible with biological treatment and posed potential hazards to the soil ecosystem where the reagent was used. In order to overcome such limitation, a modified Fenton-type reaction was performed at near neutral pH by using ferric ions and chelating agents such as catechol and gallic acid. By the combined treatment of the modified Fenton reaction and biodegradation, more than 98% of 2- or 3-ring hydrocarbons and between 70% and 85% of 4- or 5-ring compounds were degraded in the MGP soil, while maintaining its pH about 6-6.5.     

Presence of DDT metabolites in water,sediment and fish muscle tissue from Lake Prespa,Republic of Macedonia

Organochlorine pesticides were determined in water and sediment samples collected from the littoral zone of Lake Prespa, as well as from its three main tributaries (the rivers Golema, Brajcinska and Kranska), during the period 2004 to 2006. In addition, muscle tissue samples of barbus fish (Barbus prespensis Karaman, 1928) collected from the littoral zone of Lake Prespa were also analysed. The obtained results give an overview of the contamination levels of these problematic compounds at their potential sources in the river mouths, in the potentially affected, species-rich littoral section of the lake and in the muscle tissue of one selected fish species, collected near the rivers’ deltas. Special attention was paid to the presence of some DDT metabolites (1,1-dichloro-2,2-bis(p-chlorophenyl)ethylene (p,p′–DDE); (1,1-dichloro-2,2-bis(p-chlorophenyl)ethane (p,p′–DDD) and 1,1,1-trichloro-2,2-bis(p-chlorophenyl)ethane (p,p′–DDT). The extraction of pesticides from water samples was done by liquid-liquid partition in dichloromethane. For the sediment and fish tissue we used solid-liquid extraction. The extracted residues were analyzed on a gas chromatograph equipped with an electron capture detector (GC-ECD). The results of the respective studies indicated the presence of DDT metabolic forms in the samples of the three analysed matrixes. The highest levels of presence for these pollutants were found in the muscle tissue of the fish samples. The total DDTs content in the analysed muscle tissue samples range from 11.67 to 13.58 μg kg^?1of fresh tissue. The average total DDTs content for the sediment samples were within the range of 2.32 to 4.17 μg kg^?1 of dry sediment. Higher DDT metabolites content were found in the sediments collected from the rivers than in the samples from the littoral zone. The lowest average total concentrations of DDTs, on the other hand, were recorded in the water samples and ranged between 0.036 and 0.057 μg L^?1. The obtained results indicated that the dominant metabolic form in the samples of the three investigated matrixes (water, sediment and fish tissue) from Lake Prespa was p,p′-DDE. There was a very good linear correlation in this study between the content of DDT's (total DDT metabolites) detected and the percentage of total organic material in the sediment. The detected concentrations are clearly below the toxicity thresholds; consequently, severe effects on the endemic species of Lake Prespa are not very likely.     

Stable chlorine intramolecular kinetic isotope effects from the abiotic dehydrochlorination of DDT

INTENTION, GOAL, SCOPE, BACKGROUND: Identifying different sources and following reaction pathways of chlorinated organic contaminants in the environment can be challenging, especially when only their concentrations are available. Compound-specific stable chlorine measurements of some contaminants have recently been shown to provide additional information and an increased understanding of their biogeochemistry. These studies, however, have been generally limited to volatile molecules. OBJECTIVE: Here, the stable chlorine isotope ratios of the semi-volatile pesticide, 1,1,1-trichloro-2,2-bis(p-chlorophenyl)ethane (DDT) were investigated. Specifically, the intramolecular stable chlorine isotopic compositions of DDT and the kinetic isotope effect (KIE) for the abiotic dehydrochlorination of DDT to 2,2-bis(p-chlorophenyl)-1,1-dichloroethene (DDE) were determined. METHODS: Selective chemical oxidation of DDT to dichlorobenzophenone (DCBP) and analysis of each compound was used to calculate the stable chlorine isotope ratios of the alkyl and aromatic chlorines in DDT. To determine the KIE for dehydrochlorination, DDT was reacted in a basic solution to yield DDE at 52 degrees C, 60 degrees C, and 72 degrees C for 3, 5, and 5 days, respectively. RESULTS AND DISCUSSION: Significant intramolecular stable chlorine isotopic differences were observed in one sample of DDT where the alkyl and aromatic delta 37Cl values were -5.76 +/- 0.45 and -2.21 +/- 0.24%@1000, respectively. Dehydrochlorination of DDT to DDE in basic solutions at 52, 60, and 70 degrees C resulted in a substantial intramolecular KIE where the alkyl chlorines of DDE shifted by approximately 3%@1000 relative to the alkyl chlorines in DDT. However, no temperature dependence was observed. The KIE, calculated by an iterative program, was 1.009. CONCLUSIONS: Intramolecular differences in the stable chlorine isotope ratios were observed in DDT and this is the first such finding. Dehydrochlorination of DDT yields a measurable and distinct intramolecular stable chlorine KIE. RECOMMENDATION AND OUTLOOK: The results of this study demonstrate the existence of significant intramolecular differences in chlorinated organic compounds. Many other chlorinated semi-volatile and volatile organic contaminants are synthesized from multiple sources of chlorine, and we recommend that similar studies be performed on many such molecules in order to attain a clear understanding of their intramolecular chlorine isotopic differences. The existence of a measurable KIE for the dehydrochlorination of DDT to DDE shows the potential strength of using isotopic measurements to investigate the biogeochemistry of these important compounds. For example, the isotopically depleted aqueous chloride produced by dehydrochlorination of DDT to DDE may be a useful tracer of these reactions in freshwater environments.