An evaluation of three alternative formats for probation violator hearings

The purpose of the project was to improve the traffic safety impact and net benefits of the negligent operator probation violator hearing conducted by the California Department of Motor Vehicles. The three hearing formats evaluated varied in several aspects including use of license restrictions (rather than suspension or revocation), hearing duration, use of negotiation and contingency contracting, and use of caseload assignment. The two experimental programs differed primarily in the timing of restriction removal, one employing a single fixed-interval restriction and the other a sequential multiphase restriction strategy. The licensing actions used at the project entry hearing were more liberal than anticipated in all hearing formats. The standard hearing format was superior to the others both in overall traffic safety impact and net benefits. The differences between hearing formats in fatal and injury accidents and in countable convictions tended to favor the standard format. Implementation of either alternative format would probably (p≈.80) result in a decline in program net benefits. The application of a behavior modification paradigm was not successful in the project reported here.     

考虑时间满意度的应急救援人员多技能培训派遣模型*

为耦合应急救援培训和救援派遣工作任务,提升突发事件下应急救援人员工作效率,构建以培训派遣总体时间满意度最大、培训派遣总成本最小为目标函数的突发事件应急救援人员培训派遣一体化优化模型,以新冠肺炎疫情为研究背景,利用Lingo软件进行仿真求解。研究结果表明:短期培训能有效提高应急救援人员救援能力,满足受灾点应急救援时间需求及救援任务需求。     

基于综合评价法的矿山微震监测台网布设评

为建立合理有效的矿山微震监测台网布设合理性综合评价模型,选择定位精度、定位稳定性、有效监测范围、施工条件和经济因素五类综合性评价指标,分别采用了十分制量化方法,计算各项指标的评价值;再采用特尔菲法,由多位专家对五项指标进行赋值,根据赋值结果计算各项指标在综合评价模型中所占权重;最后由各评价指标的得分和权重计算台网综合评价值,并对综合评价值的取值区间进行梯度分级,最终建立矿山微震监测台网布设合理性评价模型。通过某磷矿微震监测台网布置合理性验证,表明该模型能够对微震台网进行全面有效评价,评价结果可以为台网评价及优化提供理论依据。     

Laboratory research in management: Misconceptions and missed opportunities

Laboratory research has long been a common method of inquiry in the behavioral sciences. In recent years, however, laboratory methodologies appear to have fallen from favor with many management researchers. This paper summarizes reasons for this trend including limited external validity and appropriateness of using laboratory methodologies. Additionally, a number of situations in which laboratory research may hold considerable promise and utility are identified such as using multiple samples or multiple studies in one paper, or when sensitive topics are the focus of research. The paper concludes with the reminder that the questions asked should dictate the methodology selected, not the preferences of a reviewer or editor.     

基于多因素信息融合的城市供水安全评价系统

为了确定城市供水安全状态,提出1种基于多因素信息融合思想的城市供水安全评价方法。以城市供水安全指标体系为基础,建立供水安全指标与基本概率指派函数焦元的对应关系;采用组合权重确定各评价指标的权重值作为对指标证据的支持程度,通过加权合成方法得到各因素定量、定性信息的基本概率指派函数值,利用证据理论的Dempster组合规则进行因素融合。研究结果表明:以郑州市供水安全指标体系为例,在进行多指标信息融合时与解决证据冲突的融合方法计算结果相同,郑州市2006——2008年城市供水处于不安全状态,2008年以后安全等级逐步升高且趋于稳定状态,可以预测出在未来一段时间郑州市的供水处于安全状态。     

Safety assessment of the film boiling chemical vapor infiltration (FB-CVI) process through a system-theoretic accident model and process (STAMP)

Film boiling chemical vapor infiltration (FB-CVI) is considered as one of the fastest process methodologies for manufacturing carbon-carbon (C–C) composite products and possesses various advantages compared to conventional methodologies. However, there are safety concerns associated with this process for large-scale manufacturing, mainly owing to the intrinsic nature of the precursor and the process conditions. Considering the multifunctional interactions of the various systems during the process, a system-theoretic process analysis (STPA)/system theoretic accident model and process (STAMP) model is used to perform a safety analysis of the hazardous states of the FB-CVI process at the system level. As a case study, the FB-CVI process equipment employed for the manufacturing of C–C composites is considered. The safety constraints present in the system are assessed for adequacy through a hazard analysis by STPA/STAMP. The analysis through STPA/STAMP demonstrated the capability to create proactive strategies for the design and realization of process equipment that can be employed to manufacture C–C composite products through the FB-CVI process.     

Assessment of confined space entry and rescue training for aircraft rescue and fire fighting (ARFF) members in the United States

IntroductionFire and emergency service workers, including Aircraft Rescue and Fire Fighting members, may be called on to perform confined space entry and rescue operations. The purpose of the present study was to develop a comprehensive and valid understanding of the present state of confined space entry and rescue training effectiveness and resultant compliance or use of best practices among trained Aircraft Rescue and Fire Fighting personnel.MethodThe study used a convergent, parallel mixed-methods approach. Qualitative data (n = 20) were collected via semi-structured interviews at four locations. Data were coded, analyzed and super-ordinate and sub-ordinate themes were derived. Quantitative data (n = 158) from Aircraft Rescue and Fire Fighting members were analyzed.ResultsInterviewees believed there is a lack of standardization in training, but believed training should not be completed in the same format every time. Several participants (50%) desired more realistic training. Other concerns were associated with staffing, personal readiness, and resource adequacy. With regard to survey outcomes, most respondents reported that their organizations completed confined space training (69.8%), but only 55.3% indicated this training was conducted as a full-scale exercise and nearly 40% indicated that rescue practice was not performed despite standards mandating annual rescue practice. Following training, 55.4% indicated training evaluation information was not presented.ConclusionsParticipants mostly agreed their training effectively addressed OSHA requirements, such as how to test the atmosphere, the need for and use of personal protective equipment, how to identify pertinent permit information and methods to retrieve victims in limited space. Some gaps exist between current training practices and established training requirements and standards.Practical applicationsAircraft Rescue and Fire Fighting organizations need to bolster aspects of their training, particularly with regard to standardizing training efforts, practicing rescues, providing evaluation feedback and written materials and providing adequate resources.     

Driver Workload Response to In-Vehicle Device Operations

A central concern of Intelligent Transportation Systems (ITS) is the effect of in-vehicle devices (e.g., cell phones, navigation systems, radios, etc.) on driver performance and safety. As diverse and innovative technologies are designed and implemented for in-vehicle use, questions regarding the presence and use of these devices assume progressively greater importance. Further concerns for advanced driver training require us to develop and validate reliable and effective procedures for assessing such effects. This work examines a number of candidate procedures, in particular the evaluation of change in cognitive workload as a strategy by which such goals might be achieved.     

Modeling patterns of breakdown (or archetypes) of human and organizational processes in accidents using system dynamics

Systems approaches to safety have received growing attention in modern accident investigation techniques (e.g., STAMP, Accimap) with the emphasis shifted to the organizational dynamics (or archetypes) that may lead to an erosion of defenses and a drift out of the safety margins. Although the literature contains many applications of archetypes and system dynamics to safety, this richness comes at a cost of learning. It has become very difficult for safety practitioners to integrate the diverse studies of system dynamics with their diverging models. To provide a practical tool of system dynamics in accident investigation, this article reviews earlier studies and integrates them as a classification of patterns of breakdown (or archetypes) of both human and organizational processes on the basis of two control models, that is, the Extended Control Model (ECOM) and the Viable System Model (VSM). In this article, archetypes are represented as variants of two generic templates of performance which exploit many elements of complexity theory and system control. Apart from providing a practical tool to safety practitioners to access the literature on archetypes, the generic templates of ECOM and VSM can be used in building simulators of individual and organizational processes for risk analysis.     

Trends in young driver risk and countermeasures in European countries

This paper reviews European trends regarding young drivers' accident risk and the effects of countermeasures. Young driver risk differs between countries, and has improved in the last decade, probably as a result of general improvements in road safety levels. Young male drivers' relative risk is rising, indicating that current policies are less effective for males than for females. Further research is needed to understand the causes of this development. In Europe, most countries are moving toward multiphase licensing systems, including elements like accompanied driving, protective measures, and probation periods. European evaluation studies show mixed results regarding these elements, pointing to a need for more research into the effective components.     

Work-related driving safety in light vehicle fleets: A review of past research and the development of an intervention framework

This paper presents a critical review of past research in the work-related driving field in light vehicle fleets (e.g., vehicles < 4.5 tonnes) and an intervention framework that provides future direction for practitioners and researchers. Although work-related driving crashes have become the most common cause of death, injury, and absence from work in Australia and overseas, very limited research has progressed in establishing effective strategies to improve safety outcomes. In particular, the majority of past research has been data-driven, and therefore, limited attention has been given to theoretical development in establishing the behavioural mechanism underlying driving behaviour. As such, this paper argues that to move forward in the field of work-related driving safety, practitioners and researchers need to gain a better understanding of the individual and organisational factors influencing safety through adopting relevant theoretical frameworks, which in turn will inform the development of specifically targeted theory-driven interventions. This paper presents an intervention framework that is based on relevant theoretical frameworks and sound methodological design, incorporating interventions that can be directed at the appropriate level, individual and driving target group.     

Building urban gas process safety management (UG-PSM) system: Based on root cause analysis with 160 urban gas accidents in China

Urban safety is significantly impacted by the complexity of urban gas accidents. Although China has put forward the goal of “zero fatalities in accidents” for urban gas, unfortunately, the root causes of the unsound safety culture and imperfect safety management system of urban gas enterprises remain unresolved. Therefore, statistical analysis and 24Model analysis of 160 urban gas accidents in mainland China were performed to investigate the proximate causes of the accidents and the current situation of urban gas safety. The CCPS's risk-based process safety elements were used to identify potential deficiencies in the current urban gas process safety management (UG-PSM). During the analysis, it was observed that insufficient implementation of concealed danger investigation and rectification accounted for 76%, which is the primary proximate cause of urban gas accidents. Stakeholder outreach is the most under-represented competency in urban gas safety management. Based on the results, a novel framework for the UG-PSM system was constructed, and the theory of urban gas safety management was further improved. Furthermore, we evaluated the matching degree between UG-PSM elements and the existing measures of the government, urban gas associations, third-party organizations, and urban gas enterprises. Finally, we analyzed the feasibility, challenges, and development directions of the UG-PSM system. This study establishes a foundation for researchers and practitioners in the future research and practice of urban gas process safety and provides theoretical guidance for preventing high-incidence accidents of urban gas in China.     

Bridging the gap: bringing together intentional and unintentional injury prevention efforts to improve health and well being

PROBLEM: Intentional and unintentional injury prevention efforts have traditionally been independent and non-integrated. Fostering collaboration between the sub-fields would enhance work within both sub-fields and advance injury prevention work as a whole. METHOD: A systematic assessment of similarities and differences between the sub-fields was performed, including an examination of relevant definitions and norms, research methods and findings, key risk and resiliency factors, and prevention strategies that would promote collaboration and better advance current prevention efforts. RESULTS/SUMMARY: Several areas exist in which injury prevention efforts could be coordinated or ideas and practices could be cross-applied, including training of practitioners, data collection and analysis, application of tools and methodologies, examination of risk and resiliency factors, and identification of funding sources and partners. IMPACT ON INDUSTRY: This paper delineates how intentional and unintentional injury prevention practitioners can more effectively collaborate to promote safer environments and further reduce incidence of injury. An integrated injury prevention approach could significantly impact the underlying contributors to both types of injury, allowing practitioners within both sub-fields to achieve greater outcomes through increased credibility, reduced duplication of efforts, more efficient use of resources, and unified injury prevention messages.     

Making safety training stickier: A richer model of safety training engagement and transfer

Introduction: Compared to other types of occupational training, safety training suffers from several unique challenges that potentially impair the engagement of learners and their subsequent application or “transfer” of knowledge and skills upon returning to the job. However, existing research on safety training tends to focus on specific factors in isolation, such as design features and social support. The aim of this research is to develop an overarching theoretical framework that integrates factors contributing to training engagement and transfer. Method: We conducted a comprehensive qualitative review of safety training research that was published between 2010 and 2020. We searched Web of Science, Scopus, and Google Scholar, yielding 147 articles, and 38 were included. We content analyzed article summaries to arrive at core themes and combined them with contemporary models of general occupational training to develop a rich model of safety training engagement and transfer. Results: We propose that training engagement is a combination of pre-training factors such as individual, organizational, and contextual factors, that interact with design and delivery factors. Safety training engagement is conceptualized as a three-component psychological state: affective, cognitive, and behavioral. Organizations should prioritize pre-training readiness modules to address existing attitudes and beliefs, optimize the safety training transfer climate, and critically reflect on their strategy to design and deliver safety training so that engagement is maximized. Conclusions: There are practical factors that organizations can use before training (e.g., tailoring training to employees’ characteristics), during training (e.g., ensuring trainer credibility and use of adult learning principles), and after training (e.g., integrating learned concepts into systems). Practical Applications: For safety training to ‘stick,’ workers should be affectively, cognitively, and behaviorally engaged in learning, which will result in new knowledge and skills, improvements in attitudes, and new safety behaviors in the workplace. To enable engagement, practitioners must apply adult learning principles, make the training relevant, and tailor the training to the job and individual needs. After training, ensure concepts are embedded and aligned with existing systems and routines to promote transfer.     

A review of CDC's Web-based Injury Statistics Query and Reporting System (WISQARS™): Planning for the future of injury surveillance

IntroductionThe Centers for Disease Control and Prevention (CDC) developed the Web-based Injury Statistics Query and Reporting System (WISQARS^TM) to meet the data needs of injury practitioners. In 2015, CDC completed a Portfolio Review of this system to inform its future development.MethodsEvaluation questions addressed utilization, technology and innovation, data sources, and tools and training. Data were collected through environmental scans, a review of peer-reviewed and grey literature, a web search, and stakeholder interviews.ResultsReview findings led to specific recommendations for each evaluation question.ResponseCDC reviewed each recommendation and initiated several enhancements that will improve the ability of injury prevention practitioners to leverage these data, better make sense of query results, and incorporate findings and key messages into prevention practices.     

Pushing and pulling: an assessment tool for occupational health and safety practitioners

A tool has been developed for supporting practitioners when assessing manual pushing and pulling operations based on an initiative by two global companies in the manufacturing industry. The aim of the tool is to support occupational health and safety practitioners in risk assessment and risk management of pushing and pulling operations in the manufacturing and logistics industries. The tool is based on a nine-multiplier equation that includes a wide range of factors affecting an operator’s health risk and capacity in pushing and pulling. These multipliers are based on psychophysical, physiological and biomechanical studies in combination with judgments from an expert group consisting of senior researchers and ergonomists. In order to consider usability, more than 50 occupational health and safety practitioners (e.g., ergonomists, managers, safety representatives and production personnel) participated in the development of the tool. An evaluation by 22 ergonomists supports that the push/pull tool is user friendly in general.     

危险化学品从业人员素质提升对策研究

针对当前危险化学品从业人员素质不高的突出问题,分别从社会背景、就业观念、社会保障以及产业工人培养的角度进行全面分析,最后提出危险化学品从业人员素质提升的对策和措施,为改善危险化学品企业安全生产状况提供参考。     

Older driver training programs: A systematic review of evidence aimed at improving behind-the-wheel performance

IntroductionAge- and health-related changes, alongside declines in driving confidence and on-road exposure, have been implicated in crashes involving older drivers. Interventions aimed at improving behind-the-wheel behavior are diverse and their associated impact remains unclear. This systematic review examined evidence on older driver training with respect to (1) road safety knowledge; (2) self-perceived changes in driving abilities; and (3) behind-the-wheel performance. Method Nine databases were searched for English-language articles describing randomized controlled trials (RCTs) and non-RCTs of driver training interventions aimed at those aged 55+ who did not have medical or other impairments that precluded licensure. Quality appraisals were conducted using Cochrane’s Risk of Bias Tool (RoB) and Risk Of Bias In Non-randomized Studies – of Interventions tool (ROBINS – I). [PROSPERO; registration no. CRD42018087366]. Results Twenty-five RCTs and eight non-RCTs met the inclusion criteria. Interventions varied in their design and delivery where classroom-based education, or a combination of classroom-based education with on-road feedback, improved road safety knowledge. Training tailored to individual participants was found to improve self-perceived and behind-the-wheel outcomes, including crashes. Conclusions Interventions comprised of tailored training can improve knowledge of road safety, changes to self-perception of driving abilities, and improved behind-the-wheel performance of older drivers. Future research should compare modes of training delivery for this driver population to determine the optimal combinations of off- and/or on-road training. Practical applications Training programs aimed at older drivers should be supported by theory and research evidence. By conducting comparative trials with a sufficient sample size alongside well-defined outcomes that are designed in accordance with reporting guidelines, the most effective approaches for training older drivers will be identified.     

Application of risk analysis in the liquefied natural gas (LNG) sector: An overview

In recent years, the global demand for liquefied natural gas (LNG) as an energy source is increasing at a very fast rate. In order to meet this demand, a large number of facilities such as platforms, FPSO (floating production, storage and offloading), FSRU (floating storage and regasification unit) and LNG ships and terminals are required for the storage, processing and transportation of LNG. Failure of any of these facilities may expose the market, companies, personnel and the environment to hazards, hence making the application of risk analysis to the LNG sector a very topical issue throughout the world. To assess the risk of accidents associated with LNG facilities and carriers, various risk analysis approaches have been employed to identify the potential hazards, calculate the probability of accidents, as well as assessing the severity of consequences. Nonetheless, literature on classification of the risk analysis models applied to LNG facilities is very limited. Therefore, to reveal the holistic issues and future perspectives on risk analysis of LNG facilities, a systematic review of the current state-of-the-art research on LNG risk analysis is necessary. The aim of this paper is to review and categorize the published literature about the problems associated with risk analysis of LNG facilities, so as to improve the understanding of stakeholders (researchers, regulators, and practitioners). To achieve this aim, scholarly articles on LNG risk analysis are identified, reviewed, and then categorized according to risk assessment methods (qualitative, semi-qualitative or quantitative; deterministic or probabilistic; conventional or dynamic), tools (ETA, FTA, FMEA/FMECA, Bayesian network), output/strategy (RBI, RBM, RBIM, facility siting, etc.), data sources (OREDA handbook, published literature, UK HSE databases, regulatory agencies' reports, industry datasets, and experts’ consultations), applications (LNG carriers and LNG fuelled ships, LNG terminals and stations, LNG offshore floating units, LNG plants), etc. Our study will not only be useful to researchers engaged in these areas but will also assist regulators, policy makers, and operators of LNG facilities to find the risk analysis models that fit their specific requirements.     

Development and evaluation of RAMP I – a practitioner’s tool for screening of musculoskeletal disorder risk factors in manual handling

RAMP I is a screening tool developed to support practitioners in screening for work-related musculoskeletal disorder risk factors related to manual handling. RAMP I, which is part of the RAMP tool, is based on research-based studies combined with expert group judgments. More than 80 practitioners participated in the development of RAMP I. The tool consists of dichotomous assessment items grouped into seven categories. Acceptable reliability was found for a majority of the assessment items for 15 practitioners who were given 1?h of training. The usability evaluation points to RAMP I being usable for screening for musculoskeletal disorder risk factors, i.e., usable for assessing risks, being usable as a decision base, having clear results and that the time needed for an assessment is acceptable. It is concluded that RAMP I is a usable tool for practitioners.