W型无烟煤锅炉氮氧化物排放浓度高的原因分析及解决实例

针对燃煤电厂W型火焰无烟煤锅炉普遍存在的NOx排放浓度高的问题进行了原因分析,与一般燃煤锅炉所排NOx以燃料型为主不同,该锅炉所排NOx的主要类型为热力型,炉膛燃烧温度高是热力型NOx产生量高的主要原因.通过对案例电厂煤质及炉型的分析找到了降低NOx排放的可行方法,对锅炉进行简单改造,掺烧烟煤可显著降低锅炉NOx产生量,通过试验确定掺烧烟煤的合适比例,为类似炉型提供参考.     

发电集团应对燃煤电厂超低排放的思考

新的《火电厂大气污染排放标准》全面加大了对火电厂大气污染物中烟尘、SO2、NOx的控制力度,收严了污染物排放限值。近期提出的煤电节能减排升级与改造行动计划,进一步提出了燃煤电厂达到燃气机组排放标准的超低排放要求。解读了燃煤电厂推行超低排放的一些政策支撑、技术路线,从华电集团超低排放技术及应用实例出发,对超低排放技术实施过程中需要关注的问题进行了探讨,具有一定的参考价值。     

燃煤电厂应对新标准的氮氧化物控制策略研究

介绍了我国燃煤电厂NOx排放标准及其控制技术发展状况,分析了NOx的排放现状及我国燃煤电厂NOx控制技术的特点及存在问题。结合新标准,提出在环境约束条件下效益―成本最大化的NOx控制策略。     

固态排渣煤粉炉NOx产生浓度影响因素偏相关分析

利用第一次全国污染源普查“火力发电行业产排污系数核算”工作中现场监测得到的数据,首次采用偏相关分析的方法,对固态排渣煤粉炉中机组规模、空气过剩系数、煤中挥发分和发电负荷率等因素对NOx产生浓度的影响进行定性分析,结论：NOx产生浓度与前三种因素存在显著的相关。而与发电负荷率的关系受锅炉是否采用低氮燃烧技术的影响。空气过剩系数越大,煤的挥发分越高,NOx产生浓度越低;采用低氮燃烧装置的锅炉中,机组规模越大,产生的NOx越少,且对于同一锅炉来说,NOx产生浓度随着发电负荷率的升高而增大;未采用燃烧控制的锅炉中,机组规模越大,NOx产生浓度越高,且与发电负荷率不相关。根据分析结果,提出了控制燃煤电厂固态排渣煤粉炉NOx排放的优化措施和建议。     

玉环电厂1 000 MW机组降低Nox排放的技术分析与环境评价

介绍了玉环电厂采用PM型燃烧器和MACT分级燃烧技术,降低了NOx生成量.预测不同负荷下的NOx排放浓度,对照《火电厂大气污染物排放标准》,分析玉环电厂的环境性能,为其他电厂降低NOx排放提供借鉴.     

我国中小型锅炉的NOx排放特征与管理对策

对我国中小型燃煤、燃油、燃气锅炉的NOx排放监测数据进行了统计分析,探讨了NOx的排放特征与管理控制现状.研究结果表明:燃煤锅炉中NOx排放质量浓度小于等于400.00 mg/m3的锅炉占76％,NOx平均排放质量浓度为324.60 mg/m3;燃油锅炉中NOx排放质量浓度小于等于400.00 mg/m3的锅炉占84％...     

国内燃煤电厂烟气脱硝发展现状及建议

介绍国内燃煤电厂NOx排放现状和我国NOx控制法规,以及国内燃煤电厂脱硝技术的研究和工程应用现状,并对我国烟气脱硝产业的发展提出了几点建议.     

氨法在燃煤电厂烟气治理中的应用和发展

燃煤排放的CO2、SO2、NOx等气态污染物会造成酸雨、温室效应、臭氧层破坏等一系列的大气环境问题。减少和抑制燃煤电厂燃烧过程中污染气体的排放,是实现清洁生产和能源可持续发展的基本需要。氨法烟气治理技术作为电厂排放烟气处理的新兴技术,以其污染物脱除效率高、耗能小、二次污染低、脱除副产品可资源化等特点,得到了越来越多的关注,并已在部分燃煤电厂得到成功的应用。对氨法脱除烟气中气态污染物技术进行了分析和总结,并对其应用前景进行了分析和预测,指出了氨法烟气治理技术在燃煤电厂烟气处理方面具有良好的经济、社会和环保效益,并具有广阔的发展前景。     

锅炉低NOx排放改造及试验结果分析

介绍了某电厂利用空气分级燃烧技术对420t／h锅炉燃烧器进行的低NOx排放改造情况,对锅炉改造前、后的NOx排放浓度进行了对比分析。结果表明,对锅炉实施低NOx改造后,NOx排放浓度明显下降,但锅炉热效率亦有所降低。     

基于支持向量机的燃烧过程NOx排放模型

针对电站锅炉煤粉燃烧过程中NOx排放机理模型难以建立的实际情况,取过量空气系数、一次风率、煤粉细度作为输入量,燃烧室NOx排放量作为输出量.建立三个基于向量机的NOx排放模型.研究表明,向量机模型不仅能对训练数据进行很好的训练,而且当预测一种新的工况时,也能对测试数据进行很好的拟合.     

Distribution of Cd,Ck, Pb and Zn in Soil and Vegetation Compartments in Stands of Five Boreal Tree Species in N.E. Sweden

Concentrations and total quantity of cadmium (Cd), cupper (Cu),lead (Pb) and zink (Zn) were determined in biomass and soil compartments in a replicated tree species experiment with 27-yr-old stands growing on former farmland in N.E. Sweden. Sequentialextractions of soil samples were performed in order to estimate the exchangeable and an organically bound fraction of each element. The tree species included were Picea abies (L.)H. Karst., Pinus sylvestris L., Pinus contorta Dougl., Larix sibirica Ledeb., and Betula pendula Roth.Tree species influenced the rate of removal of Cu, Pb and Zn incase of stemwood harvesting, and of Cd, Cu and Zn in the case ofwhole-tree harvesting. B. pendula and P. abies had higher quantities and average concentrations of Zn in the biomass. For all species, >50% of the Zn in the stems was found in the bark. P. abies and L. sibirica had higher quantities of Cu in the biomass than the other species.P. abies and P. contorta had high quantities of Cd inthe biomass in relation to the other species. Branches and stembark contained high concentrations of Cd and Pb in relation to foliage and stemwood. Dead branches had especially high concentrations of Pb. The high accumulation rate of Zn in thebiomass of B. pendula was related to a low exchangeable amount of Zn in the A horizon. In the superficial centimeters ofthe A horizon, a depletion similar to that found for Zn was detected for Cu, whereas for Cd and Pb, no correlations were found between quantities of elements in the trees and element pools in the soil.     

Programs assessing implementation and effectiveness of state forest practice rules and BMPs in the West

The major forest nonpoint source control programs in the West are largely regulatory, either under forest practices acts (California, Idaho, New Mexico, Nevada, Oregon, and Washington) or a streamside management act (Montana). These programs and the specific rules they enforce continue to undergo intensive scrutiny. Still, the questions are the same for these regulatory programs as for states that base nonpoint source control on voluntary BMPs (Arizona, Colorado, Utah, Wyoming). Are the rules or BMPs being applied, and are they effective in reducing nonpoint source pollution to levels that protect beneficial uses of water? The level of debate about forestry in the West has resulted in detailed monitoring and research to answer these questions. In the past, state agencies have assumed levels of BMP compliance based on the percent of operations without enforcement actions. These estimates are being replaced by statistically valid and reproducible monitoring of forest practices rules and BMP compliance levels. BMP effectiveness is being assessed using both qualitative and quantitative methods. This can involve field assessments, process-based research, and control watershed studies. Some trend monitoring is also beginning. With the regional implementation rate for forestry BMPs at about 94% and rising, it is likely that effectiveness testing will continue to be a priority and consume the majority of assessment resources for this region.     

Hysteresis in Reversal of Central European Mountain Lakes from Atmospheric Acidification

Extremely high emissions of S and N compounds in Central Europe (both 280 mmol m^-2 yr^-1) declined by 70and 35%, respectively, during the last decade. Decreaseddeposition rates of SO₄ ^-2, NO₃ ^-, and NH₄ ⁺ in the region paralleled emission declines. The reduction in atmospheric inputs of S and N to mountain ecosystemshas resulted in a pronounced reversal of acidification in the Tatra Mountains and Bohemian Forest lakes. Between the 1987–1990and 1997–1999 periods, concentrations of SO₄ ^-2 and NO₃ ^- decreased (average ± standard deviation) by 22±7 and 12±7 mol L^-1, respectively, in theTatra Mountains, and by 19±7 and 15±10 mol L^-1, respectively, in the Bohemian Forest. Their decrease was compensated in part (1) by a decrease in Ca²⁺ + Mg²⁺ (17±7 mol L^-1) and H⁺ (4±6 mol L^-1), and an increase in HCO₃ ^-(10±10 mol L^-1) in the Tatra Mountains lakes, and (2) by a decrease in Al (7±4 mol L^-1), Ca²⁺ + Mg²⁺ (9±6 mol L^-1), and H⁺ (6±5 mol L^-1), in Bohemian Forest lakes. Despite the rapid decline in lake water concentrations of SO₄ ^-2 and NO₃ ^- in response to reduced S and N emissions, their present concentrations in some lakes are higher than predictionsbased on observed concentrations at comparable emission rates during development of acidification. This hysteresis in chemical reversal from acidification has delayed biological recovery of the lakes. The only unequivocal sign of biological recovery hasbeen observed in erné Lake (Bohemian Forest) where a cladoceran species Ceriodaphnia quadrangular has recentlyreached its pre-acidification abundance.     

Reconstruction of Long-Term Changes in Lake water Chemistry,Zooplankton and Benthos of a Small,Acidified High-Mountain Lake: Magic Modelling and Palaeolimnogical Analysis

Starolesnianske pleso is a small and shallow acid lake in the High Tatra Mountains, situated at 2000 m above sea level, on granitic bedrock, with sparse and thin soil cover. When detailed measurements began in the 1980s Starolesnianske pleso had pH below 5 and only one species of cladoceran zooplankton, the ubiquitous Chydorus sphaericusPalaeolimnological investigations show changes in cladoceran zooplankton and chironomid zoobenthic assemblages since about 1920 and a major change in 1970–1980. The dynamic acidification model MAGIC was used to reconstruct changes in water chemistry over the past 150 years. The results from MAGIC agree well with the sediment record; pH levels gradually decreased from 6.5 in the mid-1800s to about 5.6 in 1920 (first response in biota) to below 5.0 by 1970, and concentrations of inorganic aluminium rose dramatically beginning about 1960. In the 1990s the lake water chemistry showed clear signs of reversal in acidification brought about by a major decline in S deposition.     

Heavy Metals Removal by Biosorption and Flotation

The removal of a mixture of heavy (toxic) metal cations (copper, nickeland zinc) from liquid effluents was investigated in this study at pilotscale, using counter-current contact mode. The innovative processinvolved the abstraction of metal ions onto fungal biosorbents, followedby the application of flotation for the subsequent solid/liquid separationof biomass particles. The ability of microorganisms to remove metal ionsfrom aqueous solutions is a well-known phenomenon. Nevertheless,engineering considerations are very important in decisions, concerningthe commercial future of biosorption and practical solutions are neededfor certain problems, such as the efficient post-separation ofmetal-loaded biomass. The two processes (flotation and biosorption) caneffectively operate in combination, in what it was termed biosorptiveflotation process. The sorbents may be recycled, after appropriate elutionof metals, as well as the treated (clean) water.     

High Immobilization of NH4+ in Danish Heath Soil Related to Succession,Soil and Nutrients: Implications for Critical Loads of N

During recent decades heathlands havechanged into grasslands in regions with high atmosphericnitrogen deposition. In regions with intermediatedeposition level (e.g., Denmark) changes have been lesspronounced which may be due to delay or decrease inresponse of the ecosystem. The mor layer (O horizon) mayplay an important role for this delay due to high sinkstrength for N. In this study, the capacity for netNH₄ ⁺ immobilization and mineralization wasstudied during short- and long-term incubations (2–36 days)of mor samples from Danish dry inland heaths. High short-term capacity for net NH₄ ⁺ immobilization wasfound to be a general characteristic of Danish heath morlayers both under heather (Calluna vulgaris) andcrowberry (Empetrum nigrum ssp nigrum), the latterdominating late stages in heathland succession. The netNH₄ ⁺ immobilization was higher under youngcompared to old or dead vegetation, and higher on lessnutrient poor soils than on extremely nutrient poor soils.The addition of N, P and C stimulated CO₂ productionand net NH₄ ⁺ immobilization, but not net Nmineralization. The immobilization of ¹⁵NH₄ ⁺caused release of dissolved organic N, increased N anddecreased C/N ratio in the microbial biomass, and indicatedgrowth of microorganisms with other metabolic abilitiesthan the indigenous population. No evidence was obtained ofstabilization of immobilized ¹⁵NH₄ ⁺ intosoil organic matter during the experiment. On background ofthe results and current knowledge it was concluded that therecognition of the high capacity for net NH₄ ⁺immobilization in mor layers does not allow for a raiseof critical loads for N for northern dry inland heaths.     

Starch-plastic materials—Preparation,physical properties,and biodegradability (a review of recent USDA research)

Recent starch-plastic research at the National Center for Agricultural Utilization Research is reviewed and related worldwide efforts are noted. Properties of starch that influence its formulation and performance in plastics are discussed. Methods are given for preparation of starch-poly(methyl acrylate) graft copolymer, starch-poly(ethylene-co-acrylic acid), and starch-poly(ethylene-co-acrylic acid)-polyethylene plastics. Their physical properties are discussed, as is degradability by enzymes or amylolytic organisms from soil, ponds, and streams.The mention of firm names or trade products does not imply that they are endorsed or recommended by the U.S. Department of Agriculture over other firms or similar products not mentioned.     

Application of Cellulose Microfibrils in Polymer Nanocomposites

Cellulose microfibrils obtained by the acid hydrolysis of cellulose fibers were added at low concentrations (2–10% w/w) to polymer gels and films as reinforcing agents. Significant changes in mechanical properties, especially maximum load and tensile strength, were obtained for fibrils derived from several cellulosic sources, including cotton, softwood, and bacterial cellulose. For extruded starch plastics, the addition of cotton-derived microfibrils at 10.3% (w/w) concentration increased Young’s modulus by 5-fold relative to a control sample with no cellulose reinforcement. Preliminary data suggests that shear alignment significantly improves tensile strength. Addition of microfibrils does not always change mechanical properties in a predictable direction. Whereas tensile strength and modulus were shown to increase during addition of microfibrils to an extruded starch thermoplastic and a cast latex film, these parameters decreased when microfibrils were added to a starch–pectin blend, implying that complex interactions are involved in the application of these reinforcing agents.     

四氮唑废水处理工艺设计

高浓度、高盐分的四氮唑生产废水通过三效蒸发浓缩,馏出液经铁炭氧微电解和混凝预处理,再采用水解酸化一接触氧化一反应二沉主体组合工艺进行处理。研究了该工艺所需构筑物和设备的设计与选型。该工艺在正常运行条件下,处理后出水pH6～9,COD 302mg／L,BOD5 108mg／L,SS30mg／L,色度36倍,水质达到GB8978--1996（污水综合排放标准》三级标准。     

Selection of Autochthonous Plant Species from SE Spain for Soil Lead Phytoremediation Purposes

Mining activity in SE of Spain, in the west Mediterranean coast, originated more than two millenniums ago. It has generated huge areas affected by heavy metals contamination, especially of lead, which is possibly one of the most important. Investigations related to the selection of autochthonous plant taxa from a typical Spanish Mediterranean area, useful for phytoextraction and phytostabilization purposes in these polluted areas are shown. Under these edaphoclimatic conditions 12 interesting species were considered, from them six taxa were chosen for further studies. Some plant species have been proposed either for phytoextraction or phytostabilization purposes. Recommendations for further research have been discussed.