Health impact assessment in spatial planning in England –types of application and quality of documentation

Health Impact Assessment (HIA) is a decision support approach which is applied in various shapes and forms throughout the world. In England, amongst a range of areas of application, HIA is applied in local (spatial) plan making and project development planning. Whilst various authors have reflected on HIA practice in England, the extent of application and its quality has remained unclear. This paper aims at addressing this gap by reporting on the results of a systematic review of HIA in planning. It is found that between 100 and 200 HIAs are likely being produced each year in England. Whilst most assessments are rapid (desk based), there are also examples of comprehensive and intermediate HIAs, where a participatory procedural approach is followed. An important finding is that those HIAs applied within the context of other assessments (integrated impact assessment -IIA, strategic environmental assessment - SEA/ sustainability appraisal -SA and environmental impact assessment – EIA) tend to be of a higher quality than standalone HIAs, mainly because of the existing comprehensive statutory procedural requirements for these other assessments into which HIA can be integrated.     

Documentation of the endotoxins present in the ambient air of cotton fiber textile mills in Québec

Cotton workers are recognized as being at risk of developing occupational lung diseases. Some researchers have identified endotoxins as being a potential etiologic agent for some of the respiratory problems. This study wants to document the concentration of endotoxins found in the ambient air of textile mills where cotton fibers are handled and to identify the processing steps where the highest endotoxins concentrations in the air were found and the one where the relative limit values (RLVs) are exceeded. The 4 mills studied process cotton fibers. All the air samples were analyzed using the chromogenic Limulus Amoebocytes lysate LAL method using a kinetic detection principle based on the IRSST's standard method. In this study, a large variability in the concentrations of endotoxins in the air was observed, depending on the mill, the processing step, and the time. Despite these variations, some processes can be identified as being major generators of endotoxins in the ambient air of the mills. The highest concentrations were measured in the weaving and drawing processes and reached 10,000 EU m(-3) of air. The opening, cleaning, carding, spinning and drawing processes are the other major endotoxins generating processes with concentrations from 24 to 8,700 EU m(-3) of air. The endotoxins concentrations exceeded the RLVs for 55% of the workstations in this project. This study demonstrated that endotoxins levels in the cotton industry are high and appropriate control measures are needed.     

Determination of Heavy Metals in Honey in Kahramanmaraş City, Turkey

Heavy metals in honey are of interest not only for quality control, but also for determination environmental contamination. The objective of this work was to determine distribution of the levels of selected heavy metals. Levels of copper (Cu), cadmium (Cd), manganese (Mn), Iron (Fe), magnesium (Mg) and nickel (Ni) in honey samples (21) in Kahramanmaraş region were determined by atomic absorption spectrometer (AAS). The mean values for Cu, Cd, Mn, Fe, and Mg were 0.01, 0.32, 0.03, 0.36 and 10.45 ppm, respectively. Nickel was not detected in honey samples. Kahramanmaraş honey samples were not free of heavy metals but the levels of them were found well below the permitted levels. The results suggested that honey may be useful for assessing the presence of environmental contaminants.     

Simulation of impact of oil spill in the ocean – a case study of Arabian Gulf

To meet the growing energy demand worldwide, oil and gas exploration and production activities have increased rapidly both in onshore and offshore areas. The produced oil from the ocean bed is transported onshore either by ship or pipeline. This has increased the risk of oil spill in the coastal area. In order to prepare an emergency preparedness plan and to assess the magnitude of risk involved in transporting and offloading oil, oil spill simulation studies play an important role. This paper describes a simulation of oil spill in coastal bay of Arabian Gulf where new developments are taking place using MIKE 21 model. The developments include a diesel based thermal power plant near Sir Baniyas Island, which is an ecological fragile area. Based on the project activity, two probable scenarios, one for diesel leak (250 m3/h) for 1 h and the other for instantaneous spill (500 m3) are considered. The MIKE 21 model was calibrated for hydrodynamics using measured field data followed by diesel-spill simulation to track its movement in the Arabian Gulf. The results for both leak and instantaneous spill indicate that spilled diesel will not move towards the Sir Banyas Island and more than 45% of the diesel will be evaporated within 48 h of oil spill. Based on the results, a clean up and contingency plan is proposed to mitigate the adverse impacts arising due to diesel spill in the study area.     

Analysis of heavy metal concentrations in sediments of selected estuaries of Malaysia—a statistical assessment

Statistical analysis of heavy metal concentrations in sediment was studied to understand the interrelationship between different parameters and also to identify probable source component in order to explain the pollution status of selected estuaries. Concentrations of heavy metals (Cu, Zn, Cd, Fe, Pb, Cr, Hg and Mn) were analyzed in sediments from Juru and Jejawi Estuaries in Malaysia with ten sampling points of each estuary. The results of multivariate statistical techniques showed that the two regions have different characteristics in terms of heavy metals selected and indicates that each region receives pollution from different sources. The results also showed that Fe, Mn, Cd, Hg, and Cu are responsible for large spatial variations explaining 51.15% of the total variance, whilst Zn and Pb explain only 18.93 of the total variance. This study illustrates the usefulness of multivariate statistical techniques for evaluation and interpretation of large complex data sets to get better information about the heavy metal concentrations and design of monitoring network.     

Polycyclic Aromatic Hydrocarbons: Need for Assessment of Health Risks in India? Study of An Urban-Industrial Location in India

This paper reports the PAHs levels in the atmosphere of an urbanised industrial site of India. A high-resolution capillary gas chromatograph with a mass spectrometric detector (HRCGC-MS) and a high performance liquid chromatograph (HPLC) equipped with a fluorescence detector were used for the identification and quantitation of PAHs. The atmospheric levels of PAHs were higher (4.66 ng/m³ yearly average) than most of the concentrations previously reported in the literature. Indian sites were found more contaminated with potently carcinogenic: four and above ringed PAHs. Based on a good correlation between the levels of lead, vanadium, BaP and BghiP, the vehicular emission appears to be a major source of the PAHs. Further, the higher levels of observed PAHs could be attributed to the vertical distribution of the aerosols, the preference of the PAHs for the particulate phase and the greater availability of the substrate in the atmosphere for their sorption. This paper also discusses the need for development of a PAHs monitoring protocol and related health effect studies in developing countries such as India.     

The effect of visitors’ pressure on the spatial variability of sandy soil in an urban parks in Tel Aviv

The effect of visitors' pressure on the spatial variability of soil properties was investigated in three open green areas in Tel Aviv. Six types of micro-environments were chosen: under oak and pine tree canopy with low (OL and PL) and high (OH and PH) visitors' pressure; herbaceous area without visitors' pressure (HE); and resting area under high visitors' pressure (RA). For each micro-environment soil samples were collected from the upper 0-5 cm depth for organic matter content and moisture determination. Before sampling, soil surface compaction and litter biomass were measured. Soil properties were affected by visitors' pressure and by the type of micro-environment. Soil organic matter content and soil moisture proved significantly higher under oak trees at low visitors' pressure. Average litter biomass significantly decreased with increasing visitors' pressure in the tree micro-environments. Average penetration depth decreased significantly with increased visitors' pressure in all micro-environments. In all the cases where averages significantly decreased, variance significantly decreased too, but the coefficient of variations increased. This means that variances changed slower than averages. Changes in averages were accompanied by a change of data population structure, which indicated more soil spatial homogeneity under high visitors' pressure. The data from different intervals of data population of soil properties demonstrated the different sensitivity to visitors' pressure.     

Spatio-temporal pattern and rationality of land reclamation and cropland abandonment in mid-eastern Inner Mongolia of China in 1990�C2005

The Mid-eastern Inner Mongolia of China, a typical agro-pastoral transitional zone, has undergone rapid agricultural land use changes including land reclamation and cropland abandonment in past decades due to growing population and food demand, climatic variability, and land use policy such as the "Grain for Green" Project (GFG Project). It is significant to the regional ecology and sustainability to examine the pattern and its rationality of land use change. The processes of land reclamation and cropland abandonment were accessed by using land use change dataset for four periods of 1990, 1995, 2000, and 2005, derived from the interpretation of Landsat TM images. And then the rationality of land reclamation and cropland abandonment was analyzed based on the habitat suitability for cultivation. The results indicated that: (1) land reclamation was the dominant form of agricultural land use change from 1990 to 2005, the total cropland area increased from 64,954.64 km(2) in 1990 to 76,258.51 km(2) in 2005; However, the speed of land reclamation decreased while cropland abandonment increased around 2000. The Land Reclamation Degree decreased from 1995-2000 to 2000-2005, meanwhile, Cropland Abandonment Degree increased. (2) As for the habitat suitability levels, moderately and marginally suitable levels had largest areas where cropland was widespread. Pattern of agricultural land use trended to become more rational due to the decrease of land reclamation area in low suitable levels and the increase of cropland abandonment in unsuitable area after 2000. (3) The habitat suitability-based rationality analysis of agricultural land use implicated that the GFG Project should take cultivation habitat suitability assessment into account.     

Distribution of heavy metals in the dissolved and suspended phase of the sea-surface microlayer, seawater column and in sediments of Singapore’s coastal environment

Concentrations of heavy metals were determined in the water column (including the sea-surface microlayer, subsurface, mid-depth and bottom water) and sediments from Singapore’s coastal environment. The concentration ranges for As, Cd, Cr, Cu, Ni, Pb and Zn in the seawater dissolved phase (DP) were 0.34–2.04, 0.013–0.109, 0.07–0.35, 0.23–1.16, 0.28–0.78, 0.009–0.062 and 0.97–3.66 μg L⁻¹ respectively. The ranges for Cd, Cr, Cu, Ni, Pb and Zn in the suspended particulate matter (SPM) were 0.16–0.73, 6.72–53.93, 12.87–118.29, 4.34–60.71, 1.10–6.08 and 43.09–370.49 μg g⁻¹, respectively. Heavy metal concentrations in sediments ranged between 0.054–0.217, 37.48–50.52, 6.30–21.01, 13.27–26.59, 24.14–37.28 and 48.20–62.36 μg g⁻¹ for Cd, Cr, Cu, Ni, Pb and Zn, respectively. The lowest concentrations of metals in the DP and SPM were most frequently found in the subsurface water while the highest concentrations were mostly observed in the SML and bottom water. Overall, heavy metals in both the dissolved and particulate fractions have depth profiles that show a decreasing trend of concentrations from the subsurface to the bottom water, indicating that the prevalence of metals is linked to the marine biological cycle. In comparison to data from Greece, Malaysia and USA, the levels of metals in the DP are considered to be low in Singapore. Higher concentrations of particulate metals were reported for the Northern Adriatic Sea and the Rhine/Meuse estuary in the Netherlands compared to values reported in this study. The marine sediments in Singapore are not heavily contaminated when compared to metal levels in marine sediments from other countries such as Thailand, Japan, Korea, Spain and China.     

Mapping of Noise by Using Gis in ŞAnliurfa

Traffic noise results from highways where the most important source of noise in cities. This noise has the properties of linear source. Constitution of noise maps has become compulsory to see the regions that are influenced from the noise, and to put forward the future environmental approaches. During the mapping of the noise, generally two fundamental problems are encountered, excessive time requirement for the measurement of noise and determining the method for the constitution of maps.This study was conducted in Sanliurfa city of Turkey, in 3×4 km area. Continuous weekly data were obtained in 11 measurement points. By using these data in (GIS) environment, preparation of the most reliable map in the shortest time is achieved by the interpolation method.     

Determination of Henry’s Law Constant of Formaldehyde as a Function of Temperature: Application to Air–Water Exchange in Tahtali Lake in Izmir, Turkey

The Henry's law constant (H) is an important parameter in predicting the transport, behavior and fate of organic compounds in environment. H is also required to model the air-water exchange of chemicals. Henry's law constant of formaldehyde (HCHO) was determined at six temperatures (50, 40, 30, 20, 10, and 5 degrees C) using a bubble-column technique. The apparent Henrys law constant (H*) values were strongly correlated to inverse of temperature (1/T, K) and the following relationship was obtained: In H* = (-1,641.3/T)-3.089. Seven concurrent ambient air and aqueous samples were also collected between October 11-17, 2005 at a sampling site located on the shoreline of Tahtali dam Lake in Izmir, Turkey to determine the magnitude and direction (deposition or gas-out) of HCHO flux. In all cases, the modeled gas-phase flux was positive (average +/- SD, 3,181 +/- 408 microg m(-2) day(-1)) indicating that atmospheric HCHO deposited to the Tahtali Lake.     

Analysis of acidic components, heavy metals and PAHS of particulate in the Changwon–Masan area of Korea

This study is an analysis of the concentrations and components of heavy metals in PM_2.5 and the total suspended particulate (TSP) collected at a mechanical industrial complex (IC) site in Changwon and at a residential site in Masan, Korea. Particulate was collected during two sampling periods, from the late summer to the early fall and from the middle to late fall, at the IC site and one sampling period, from the middle fall to the early winter, at the residential site. PM_2.5 and TSP samples were taken by an annular denuder system and a hi-volume air sampler, respectively. The authors also identified the concentrations and components of heavy metals extracted from the PM_2.5 and TSP filters, the acidic components extracted from the PM_2.5 filters, and the polycyclic aromatic hydrocarbons (PAHs) extracted from polyurethane foam (PUF) plug. The average concentrations of the PM_2.5 collected at the IC and residential sites were very similar. Major sources of PM_2.5 at the study sites, however, were air emissions from vehicles and industry as well as emissions from residential heating and soil origins, respectively. The higher concentrations of the TSP at the IC site, as compared to those at the residential site, were due to either increased suspended dust from vehicle emissions or re-suspended road dust because of increased vehicle speeds near the IC site. Heavy metal concentrations in the TSPs were higher than those in the PM_2.5. The heavy metal concentrations in the PM_2.5 and TSP at the IC site with heavy traffic were substantially greater than those at the residential site. The concentrations of TSP and heavy metals and PAHs in PM during the period of the middle to late fall was much higher than those during the period of the late summer to early fall at the IC site. This is because of the difference in meteorological characteristics and energy uses between two periods. The residential site also showed higher concentrations of acidic anions while the IC site showed higher concentrations of acidic cation. Secondary aerosols or particulates, such as ammonium nitrate or ammonium nitrite, might have been important constituents of the PM_2.5 at the residential site. The PAHs in the TSP collected at the IC site was greatly affected by traffic and industry emissions consisting mostly of high molecular weight PAHs with two to four rings. PAHs in the TSP at the site, however, were affected by residential heating and air emissions from small chemical plants having higher concentrations of low molecular weight PAHs with five to six rings.     

Time trend of Butyl- and Phenyl-Tin contamination in organisms of the Lagoon of Venice (1999–2003)

In the period 1999-2003 a monitoring study on the accumulation of organotin compounds in edible organisms in the Lagoon of Venice was conducted. Butyl and Phenyl derivatives were determined in pooled samples of Mytilus galloprovincialis and Tapes spp. with the aims of assessing organotin contamination in the Lagoon of Venice in the period just preceding their ban in Europe, monitoring the concentrations in organisms with a high commercial use, evaluating a potential hazard for human health due to seafood and identifying the possible contamination sources. Sampling stations (up to 20) were distributed around the Lagoon and particularly concentrated in the area close to the town of Chioggia. Significantly higher (analysis of variance (ANOVA), p < 0.05) tributyltin (TBT) concentrations were found in mussels (from 38 +/- 8 to 6,666 +/- 1,333 microg kg(-1) d.w., as TBT(+)), than in clams (from 6 +/- 1 to 2,256 +/- 451 microg kg(-1) d.w., as TBT(+)). During the 3 years of the survey no increase in average concentrations of the butyltin compounds (tributyltin (TBT) + dibutyltin (DBT) + monobutyltin (MBT)) was observed (ANOVA, p > 0.05) in either species. Furthermore, by analyzing the entire data set, it is evident that most stations show analogous concentrations in the 3 years for both species, whereas few have anomalously higher concentrations. If organotin concentrations in specimens from some sites are compared with the Tolerable Average Residue Level, a possible risk for human health must be considered.     

Geochemical behavior of heavy metals in a Zn–Pb–Cu mining area in the State of Mexico (central Mexico)

The geochemical behavior of zinc, lead and copper from sulfidic tailings in a mine site with potential to generate acidic drainage (pyrite (55%) and sphalerite (2%)) is reported in this paper. The mining area is divided in two zones, considering the topographic location of sampling points with respect to the tailings pile: (a) outer zone, out of the probable influence of acid mine drainage (AMD) pollution, and (b) inner zone, probably influenced by AMD pollution. Maximum total ions concentrations (mg/L) measured in superficial waters found were, in the outer zone: As (0.2), Cd (0.9), Fe (19), Mn (39), Pb (5.02), SO4(2-) (4650), Zn (107.67), and in the inner zone are As (0.1), Cd (0.2), Fe (88), Mn (13), Pb (6), SO4(2-) (4,880), Zn (46). The presence of these ions that exceeding the permissible maximum limits for human consume, could be associated to tailings mineralogy and acid leachates generated in tailings pile.     

Benefits of Bt cotton counterbalanced by secondary pests? Perceptions of ecological change in China

In the past, scientific research has predicted a decrease in the effectiveness of Bt cotton due to the rise of secondary and other sucking pests. It is suspected that once the primary pest is brought under control, secondary pests have a chance to emerge due to the lower pesticide applications in Bt cotton cultivars. Studies on this phenomenon are scarce. This article furnishes empirical evidence that farmers in China perceive a substantial increase in secondary pests after the introduction of Bt cotton. The research is based on a survey of 1,000 randomly selected farm households in five provinces in China. We found that the reduction in pesticide use in Bt cotton cultivars is significantly lower than that reported in research elsewhere. This is consistent with the hypothesis suggested by recent studies that more pesticide sprayings are needed over time to control emerging secondary pests, such as aphids, spider mites, and lygus bugs. Apart from farmers?? perceptions of secondary pests, we also assessed their basic knowledge of Bt cotton and their perceptions of Bt cotton in terms of its strengths and shortcomings (e.g., effectiveness, productivity, price, and pesticide use) in comparison with non-transgenic cotton.     

Determination of Cadmium Levels in Agricultural Areas of Çarşamba and Bafra Plains

Cadmium pollution resulted from fertilizer applications were studied by determining cadmium levels in agricultural and non-agricultural soils of Bafra and Çar?amba plains. Soil samples of 68 were collected from agricultural (34) and non-agricultural (34) areas. The sample of 2 g was placed in a test tube and digested with hydrochloric acid and nitric acid mixture (3:1, v/v) in an aluminum block. Taking up the evaporated residue was dissolved in 1% nitric acid and total cadmium concentrations were determined with GF-AAS. Mean level of cadmium contents were found in agricultural areas 0.162?±?0.078 for Çar?amba and 0.433?±?0.288 mg kg^?1 for Bafra. The accuracy of the method was tested with determining cadmium contents of standard reference material and cadmium spiked soil samples.     

Speciation of Trace Metals in Coastal Sediments of El-Mex Bay South Mediterranean Sea–West of Alexandria (Egypt)

Sediments of El-Mex Bay estuary on the southern Mediterranean Sea have been analyzed for trace metals after sediment fractionation by sequential leaching. A sequential extraction procedure was applied to identify forms of Mn, Cu, Cd, Cr, Zn and Fe. The five steps of the sequential extraction procedure partitioned metals into: CH₃COONH₄ extractable (F1); NaOAC carbonate extractable (F2); NH₂OH.HCl/CH₃COOH reducible extractable (F3); H₂O₂–HNO₃ organic extractable (F4) and NHO₃/HClO₄/HF acid soluble residue (F5). Extracted concentrations of trace metals analyzed after all five steps, were found to be (μg/g) for Mn: 1930.2, Cu: 165.3, Cd: 60.9, Cr: 386.3, Zn: 2351.3 and Fe: 10895. Most of elements were found in reducible fraction except Fe found in acid soluble residue, characterizing stable compounds in sediments. Labile (non-residual) fractions of trace elements (sum of the first four fractions) were analyzed because they are more bioavailable than the residual amount. Correlation analysis was used to understand and visualize the associations between the labile fractions of trace metals and certain forms, since Fe-and Mn-oxides play an important role in trace metals sorption within aquatic systems, especially within El-Mex Bay sediments that characterized by varying metal bioavailability.     

Status of Heavy Metals in Water and Bed Sediments of River Gomti – A Tributary of the Ganga River, India

The concentrations of cadmium, chromium, copper, iron, lead, manganese, nickel, and zinc in water and bed sediments of river Gomti have been studied in a fairly long stretch of 500 km from Neemsar to Jaunpur. Grab samples of water (October 2002–March 2003) and bed sediments (December 2002 and March 2003) were collected from 10 different locations following the standard methods. The river water and sediment samples were processed and analyzed for heavy metals viz., Cd, Cr, Cu, Fe, Pb, Mn, Ni, and Zn, and using ICP-AES. The heavy metals found in the river water were in the range: Cd (0.0001–0.0005 mg/L); Cr (0.0015–0.0688 mg/L); Cu (0.0013–0.0.0043 mg/L); Fe (0.0791–0.3190 mg/L); Mn (0.0038–0.0.0973 mg/L); Ni (0.0066–0.011 mg/L); Pb (0.0158–0.0276 mg/L); and Zn (0.0144–0.0298 mg/L) respectively. In the sediments the same were found in the range: Cd (0.70–7.90 g/g); Cr (6.105–20.595 g/g); Cu (3.735–35.68 g/g); Fe (5051.485–8291.485 g/g); Mn (134.915–320.45 g/g); Ni (13.905–37.370 g/g); Pb (21.25–92.15 g/g); and Zn (15.72–99.35 g/g) of dry weight respectively. Some physico-chemical parameters viz., pH, total solids, total dissolved solids, total suspended solids, dissolved oxygen, biological oxygen demand, chemical oxygen demand, hardness etc. were estimated as these have direct or indirect influence on the incidence, transport and speciation of the heavy metals. Based on the geoaccumulation indices, the Gomti river sediments from Neemsar to Jaunpur are considered to be unpolluted with respect to Cr, Cu, Fe, Mn, and Zn. It is unpolluted to moderately polluted with Pb. In case of Cd it varies from moderately polluted to highly polluted. As far as Ni is concerned the sediment is very highly polluted at Barabanki and Jaunpur D/s. No correlation was found between enrichment factor and geoaccumulation index.     

Design and assembly of an experimental laboratory for the study of atmosphere–plant interactions in the system of fumigation chambers

A 5-day biochemical oxygen demand (BOD(5)) test has been used as the standard measurement of organic pollution in rivers worldwide. However, it may be argued that BOD is not a sufficient indicator of organic pollution when nitrogenous biochemical oxygen demand (NBOD) is present in water samples. In this study, BOD, NBOD, and carbonaceous biochemical oxygen demand (CBOD) of treated sewage effluent (TSE) were measured near at the discharge outlet of 3 sewage treatment plants (STPs) in Sakai, Itachi, and Kashio rivers in Central Japan. Additional measurements were conducted at one point upstream and two points downstream from the STP discharge points in the rivers. It was estimated that NBOD values in the TSE of Sakai River, Kashio River and Itachi River accounted for 54%, 69% and 18% of their BOD values, respectively. Respective NH4+ and NO2- concentrations were positively correlated with those of NBOD values in Sakai, Itachi, and Kashio rivers. The BOD loads from the TSE were estimated to be 2.2, 5.7, and 1.2 times higher than the CBOD loads in the Sakai, Itachi, and Kashio rivers, respectively. The variation of the portion of NBOD values of each TSE, as well as the ratios of CBOD to BOD loads, was attributed to the difference in each STP system. Consequently, the NH4+ and NO2- of TSE led to the increase of NBOD in the Sakai River basin.