Metal fractionation study on bed sediments of Hussainsagar Lake, Hyderabad, India

Hussainsagar Lake in the heart of Hyderabad City (India) receives toxic substances through five streams draining from a catchment area of 245 km². Of particular interest are heavy metals received from urban runoff as well as municipal sewage and industrial effluents. Heavy metals entering the lake get adsorbed onto the suspended sediments, which eventually settle down in the bottom of the lake. In this study, fractionation of metal ions has been studied on the bed sediments of Hussainsagar Lake in order to determine the ecotoxic potential of metal ions. Comparison of sediments with average shale values indicated anthropogenic enrichment with copper, nickel, lead, cadmium, and zinc. The risk assessment code as applied to the present study reveals that 10–17% of manganese, 10–18% of nickel, 14–24% of chromium, 10–19% of lead, 21–30% of cadmium, and 18–28% of zinc exist in exchangeable fraction and, therefore, comes under medium risk category and may enter into food chain. The association of these metals with the exchangeable fraction may cause deleterious effects to aquatic life. The present database will help in formulating guidelines for carrying out dredging operations under restoration programs in the Hussainsagar Lake.     

Effects of Flooding on Lead and Cadmium Speciation in Sediments from a Drinking Water Reservoir

Římov water reservoir on the river Malše is the main source of drinking water for the town of České Budějovice and for the majority of inhabitants in the South Bohemian region, Czech Republic. Changes in cadmium and lead contents in bottom sediments before and after an extensive flood on the river Malše in August, 2002 were therefore determined. A five-step sequential extraction procedure was used in order to obtain more detailed information about the influence of the flood on heavy metal retention. In order to determine the mobility of lead and cadmium, the mobility factor (MF) for these heavy metals was calculated. The mobility factor of cadmium showed a significant decrease in the upper parts of the sediment profiles after the flood (e.g., from 59.4% to 49.1%) caused by a release of cadmium especially from the exchangeable fraction. There were no significant changes in the lead mobility factor after the flood, but a decrease of lead concentration in the exchangeable fraction was observed. Presented results show that the flood led to a leaching of the heavy metals present in bottom sediments into the environment.     

Metal Pollution Assessment of Surface Sediments Along a New Gas Pipeline in the Niger Delta (Nigeria)

Chromium, nickel, copper, zinc and cadmium were determined in sediments of the Niger Delta (Nigeria) in order to discriminate between natural metal sources and anthropogenic ones. Surface sediments were collected at seven sites along a new gas pipeline near Port Harcourt, between the New Calabar River and the Bonny River towards Bonny town. Chemical characterisation is obtained by hydrofluoric–nitric acid digestion procedure, providing the ‘total’ (‘residual’) metal contents. Information about the anthropogenic metal fraction was obtained by cold diluted hydrochloric acid extraction procedure. This ‘labile’ acid soluble fraction of metals, perhaps due to relatively recent inputs in the sediments, constitutes the fraction more likely to be available to marine organisms, and furnishes a first evaluation of the possible toxicity of sediments of this sensitive ecosystem. Zinc appears to be the most available of all the heavy metals: its ‘labile’ fraction attains 40–50% of the ‘total’ zinc in sediment. Sites near Port Harcourt city are the most contaminated. All the examined metals are one order of magnitude below the respective values proposed as a limit for toxicity and are comparable with those observed by other authors in similar Niger Delta areas. Some anomalous data found near Port Harcourt city suggest that zinc and cadmium are the metals that require further monitoring. Their anthropogenic source could be derived from urban and industrial sewage.     

Metal Fractionation Studies in Surfacial and Core Sediments in the Achankovil River Basin in India

The Fractionation of Fe, Zn, Cu, Pb, Mn and Cd in the sediments of the Achankovil River, Western Ghats, India using a sequential extraction method was carried out to understand the metal availability in the basin for biotic and abiotic activities. Spatial distribution of heavy metals has been studied. Sediment grain size has significant control over the heavy metal distribution. The fluctuations in their concentration partly depend upon the lithology of the river basin and partly the anthropogenic activities. The sediments are dominated by sand and are moderately to strongly positively skewed and are very leptokurtotic in nature. The quartzite and feldspars are abundant minerals along with significant amount of mica with low clay content. The core sediments show increasing trend of heavy metal concentration with depth due to the recent addition of anthropogenic sources and post-diagenic activities. Significant amount of Cd (18%) was found in carbonate fraction, which may pose environmental problems due to its toxic nature. Small concentrations of metals, except Cd and Cu, are in exchangeable fraction, which indicate low bio-availability. Enrichment Factor (EF) for individual metals shows the contribution from terrregious and in part from anthropogenic sources. Selective Sequential Extraction (SSE) study shows the variation in specific metal distribution pattern, their distribution in different phases and their bio-availability. Maximum amount of the metals were bound to the non-residual fractions (mainly Fe-oxides). Overall, bio-availability of these micronutrients from sediments seems to be very less. Non-residual phase is the most important phase for majority of heavy metals studied. Among the non-residual fraction, maximum amount of the heavy metals bound to Fe-oxides. The study high lights the need for in-depth study of heavy metals distribution and fractionation in the smaller river basins to get precise information on the behavior and transport of heavy metals in the fluvial environment and their contribution to the world ocean.     

Fractionation and Sequential Extraction of Heavy Metals in the Soil of Scrapyard of Discarded Vehicles

Chemical and physical size fractionation of heavy metals were carried out on 20 soil samples from the scrap yard area. Tessier method was used in sequential extraction. Cadmium showed the highest levels among the other elements studied in the exchangeable fraction (about 33%), while other elements showed low levels in this fraction (≥1%). Lead and manganese were mostly found in the Fe–Mn oxide fraction, zinc and iron were mostly in residual fraction, while copper was mostly found in the organic fraction of the soil. Soil samples were size-fractionated into four sizes: 1000–500, 500–125, 125–53, and less than 53 μm. The highest levels of Fe, Cu, Pb, Mn, and Cd were found in the medium fraction (500–125 μm), while zinc showed its highest levels in the fine fraction (125–53 μm). The order of heavy metal load in the size fractions was found to be medium > fine > coarse > silt for Fe, Mn, Cu, Pb, and Cd, where it was found as fine > medium > coarse > silt for zinc.     

Heavy Metals Fractionation in Ganga River Sediments, India

The Ganga River is the largest river in India which, originates in the Himalayas and along with the Brahmaputra River, another Himalayan river, transports enormous amounts of sediments from the Indian sub-continent to the Bay of Bengal. Because of the important role of river sediments in the biogeochemical cycling of elements, the Ganga river sediments, collected from its origin to the down stretches, were studied in the present context, to assess the heavy metals associated with different chemical fractions of sediments. The fractionation of metals were studied in the sediments using SM&T protocol for the extraction of heavy metals and geo-accumulation index (GAI) (Muller, Schwermetalle in den sedimenten des rheins – Veranderungen seit. Umschau, 79, 778–783, 1979) and Metal Enrichment Factor (MEF) in different fractions were calculated. As with many river systems, residual fractions constitute more than 60% of total metals, except Zn, Cu and Cr. However, the reducible and organic and sulfide components also act as major sinks for metals in the down stretches of the river, which is supported by the high GAI and MEF values. The GAI values range between 4 and 5 and MEF exceed more than 20 for almost all the locations in the downstream locations indicating to the addition of metals through urban and industrial effluents, as compared to the low metals concentrations with less GAI and MEF in the pristine river sediments from the rivers in Himalayas.     

Heavy metals partitioning in sediments of the Kabini River in South India

Cu, Cr, Fe, Mn, Ni, Pb, and Zn in the sediments of the Kabini River, Karnataka, India was studied to determine the association of metal with various geochemical phases by sequential extraction. The variations of heavy metal concentration depend on the lithology of the river basin and partly on anthropogenic activities. The Kabini River sediments are dominated by Sargur supracrustals with amphibolites, gneisses, carbonates, and ultrabasic rocks weathering into gneissic and serpentine soils carrying a natural load of cationic heavy metals. The source of heavy metals in the Kabini riverbed sediments is normally envisaged as additional inputs from anthropogenic over and above natural and lithogenic sources. Geochemical study indicates the metals under study were present mostly in the least mobilizable fraction in the overlying water and it is concluded that heavy metals in these sediments are to a great extent derived from multisource anthropogenic inputs besides geochemical background contributions The results show that lead and chromium have higher potential for mobilization from the sediment due to higher concentration at the exchangeable ion and sulfide ion bounded, also Cu and Pb have the greatest percentage of carbonate fraction, it means that the study area received inputs from urban and industrial effluents. Association of the Fe with organic matter fraction can be explained by the high affinity of these elements for the humic substances. Further, Zn and Ni reveal a significant enrichment in sediment and it is due to release of industrial wastewater into the river. These trace metals are possible contaminants to enter into aquatic and food chain.     

Metal speciation studies in the aquifer sediments of Semria Ojhapatti,Bhojpur District,Bihar

The pollution of aquifer sediments by heavy metals has assumed serious concern due to their toxicity and accumulative behavior. Changes in environmental conditions can strongly influence the behavior of both essential and toxic elements by altering the forms in which they occur and therefore quantification of the different forms of metal is more meaningful than total metal concentrations. In this study, fractionation of metal ions in aquifer sediments of Semria Ojhapatti area, Bhojpur district, Bihar has been studied to determine the ecotoxic potential of metal ions. The investigations suggest that iron, copper, and arsenic have a tendency to remain associated in the following order residual > reducible > acid-soluble > oxidizable; manganese and zinc have tendency to be associated as residual > acid-soluble > reducible > oxidizable. The risk assessment code reveals that manganese and zinc occur in significant concentration in acid-soluble fraction and therefore comes under the high risk category and can easily enter the food chain. Most of the iron, copper, and arsenic occur as immobile fraction (i.e. residual) followed by its presence in reducible fraction and would pose threat to the water quality due to changing redox conditions. The metal enrichment factor in the study area shows moderate to significant metal enrichment in the aquifer sediments which may pose a real threat in near future. The geo-accumulation index of metals also shows that the metals lie in the range of strongly contaminated (for iron at shallow depths) to moderately contaminated to uncontaminated values.     

Fractionation and mobility of cadmium and zinc in urban vegetable gardens of Kano, Northern Nigeria

Metal fractionation provides information on mobility and stability of various metal species which can be used to evaluate the movement of such metals in soils. The effect of wastewater irrigation on the fractions, spatial distribution, and mobility of cadmium (Cd) and zinc (Zn) was investigated in five urban gardens in Kano, Nigeria. Concentration of total Zn in the surface soils (0–20 cm) ranged from 121 to 207 mg kg^− 1 while Cd concentration was 0.3–2.0 mg kg^− 1. Speciation of both heavy metals into seven operationally defined fractions indicated that the most reactive forms extracted with ammonium nitrate and ammonium acetate, also considered as the bioavailable fractions, accounted for 29–42% of total Cd and 22–54% of total Zn, respectively. The weakly bound fractions of Cd and Zn reached up to 50% of the total Cd and Zn concentrations in the soils. Such high proportions of labile Cd and Zn fractions are indicative of anthropogenic origins, arising from the application of wastewater for irrigation and municipal biosolids for soil fertility improvement. Thus, given the predominance of sandy soil textures, high concentrations of labile Cd and Zn in these garden soils represent a potential hazard for the redistribution and translocation of these metals into the food chain and aquifer.     

Heavy metal concentrations in water and sediments in Tasik Chini, a freshwater lake, Malaysia

The purpose of this paper are to determine the concentration of heavy metals namely cadmium (Cd), copper (Cu) and lead (Pb) in water and sediment; and to investigate the effect of sediment pH and sediment organic matter on concentration of cadmium, copper and lead in sediment at oxidation fraction. For this purpose the concentration of heavy metals were measured in water and sediments at 15 sites from Tasik Chini, Peninsular Malaysia. The sequential extraction procedure used in this study was based on defined fractions: exchangeable, acid reduction, oxidation, and residual. The concentration of heavy metals in residual fraction was higher than the other fractions. Among the non-residual fractions, the concentration of heavy metals in organic matter fraction was much higher than other fractions collected from all sampling sites. The pH of the sediment in all sites was acidic. The mean pH ranges from 4.8 to 5.5 with the higher value observed at site 15. Results of organic matter analysis showed that the percentage of organic matter present in sediment samples varies throughout the lake and all sites of sediments were relatively rich in organic matter ranging from 13.0% to 34.2%. The highest mean percentage of organic matter was measured at sampling site 15, with value of 31.78%.