首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到10条相似文献,搜索用时 93 毫秒
1.
This investigation aims to represent aerobic utilization of biodegradable organic matter present in wastewater by a rate equation. This rate equation can then be used to develop a substrate utilization (removal) kinetic model for unsteady state activated sludge process. To achieve this objective, theoretical utilization of biodegradable organic matter in batch process and growth pattern theory were studied. Also, experimental data representing removal of organic matter in different types of wastewaters were collected and analyzed for batch and continuous activated sludge assays. A rate equation was proposed to describe the utilization of biodegradable organic matter based on theoretical analysis of batch process. This rate equation was then verified through differential and integral analysis of the experimental data. Furthermore, a substrate kinetic model for batch and continuous processes was developed. The developed rate equation will facilitate the analysis and design of sequencing batch reactor (SBR) technology for biological treatment of wastewater.  相似文献   

2.
The fate of micropollutants throughout wastewater treatment systems is highly dependent on their sorption interactions with sludge matter. In this study, both the sorption and desorption kinetics of polycyclic aromatic hydrocarbons (PAHs) in activated sludge were shown to be very rapid in comparison to biodegradation kinetics. It was concluded that PAH transfer does not limit their biodegradation and that their fate is governed by the sorption/desorption equilibrium state. The effect of contact time between sludge and PAHs was also investigated. It was shown that aging did not influence the sorption/desorption equilibrium although PAH losses during aging suggest that sequestration phenomena had occurred. This implies that for PAH sorption assessment within treatment processes there is no need to include a contact time dimension. As a consequence, thanks to an innovative approach taking into account sorption equilibria and sequestration, this work has demonstrated that studies in the literature which, in main, deal with micropollutant sorption in sewage sludge with only a short contact time can be extrapolated to real systems in which sorption, desorption and aging occur.  相似文献   

3.
Sludge dewatering is a process whereby water is removed from sludge so as to reduce its volume and alter its physical state from semisolid to damp solid. This physical change reduces the volume of sludge considerably and therefore the cost of disposal. The degree of reduction of sludge volume or dewatering is a function of the characteristics of sludge and the type of dewatering device. Sludge characteristics such as specific resistance, capillary suction time(CST), filter yield and solid content can be determined in the laboratories. Knowledge of these characteristics with different dosages of sludge conditioners helps in effective dewatering and sludge handling operations.Oil and grease have an affinity for suspended solids. Experiences show that the presence of oil in wastewater results in poor substrate utilization causing less aerobic treatment and subsequently hinder settling and dewatering processes. Sludge samples with different oil contents varying from 1.8% to 8.0% by weight have been examined in the laboratory to find out their specific resistance, capillary suction time and filter yield. Alum was used as a conditioner. Different dosages of alum varying from 2% to 12% by weight were used to determine the optimum chemical dosage for varying oil contents. Buchner funnel apparatus, filter leaf apparatus and capillary suction time test apparatus were used to determine the dewatering characteristics specific resistance, filter yield and capillary suction time respectively.Addition of alum decreases the specific resistances and capillary suction times of oily sludges rapidly upto 4% dosages. Alum dosages beyond 4% only increase the solids content in the sludge cake and increase the sludge volume to be handled. The total suspended solids of filtrate decrease with alum dosage. The correlations between dewatering characteristics were studied. A correlation between CST and specific resistance to filtration was established. CST can be measured easily and quickly in the laboratories. Using the CST and the correlation a quick prediction on dewaterability can be established.  相似文献   

4.
The removal capacity of different wastewater treatment plant (WWTP) technologies adopted in rural areas for phthalate was investigated in the Eastern Cape, South Africa. Wastewater samples collected from three selected WWTPs which use activated sludge (AS), trickling filter (TF), and oxidation pond (OP) technology were extracted using the solid-phase extraction method followed by gas chromatography-mass spectrometry (GC-MS) analysis. The six selected phthalate esters (PAEs) dimethyl phthalate (DMP), diethyl phthalate (DEP), di-n-butyl phthalate (DBP), benzyl butyl phthalate (BBP), di(2-ethyl hexyl) phthalate (DEHP), and di-n-octyl phthalate (DOP) were detected in all the samples collected from the WWTPs. DBP was the most abundant compound in the influent, effluent, and sludge samples with a maximum detection of 2497 μgL?1, 24.2 μgL?1, and 1249 μg/g dW, respectively, followed by DEHP and BBP. There was a relatively high removal capacity achieved by AS in Alice, TF in Berlin, and OP in Bedford with a removal efficiency that varied between 77 and 99%, 76 and 98%, and 61 and 98%, respectively. A high significant correlation of PAE removal with total suspended solids (TSS) and turbidity suggests that the removal performance proceeded more through adsorption on settling particles and sludge than on biodegradation. However, the concentrations of PAEs detected in the final effluent and sludge samples exceeded acceptable levels allowed internationally for a safe aquatic environment. AS may have exhibited a more stable and better performance across the different seasons; however, pollution source control still deserves a special attention to prevent the risk posed by these micropollutants.  相似文献   

5.
This article describes the application of on-line nonlinear monitoring of a sequencing batch reactor (SBR). Three-way batch data of SBR are unfolded batch-wisely, and then a adaptive and nonlinear multivariate monitoring method is used to capture the nonlinear characteristics of normal batches. The approach is successfully applied to an 80 L SBR for biological wastewater treatment, where the SBR poses an interesting challenge in view of process monitoring since it is characterized by nonstationary, batchwise, multistage, and nonlinear dynamics. In on-line batch monitoring, the developed adaptive and nonlinear process monitoring method can effectively capture the nonlinear relationship among process variables of a biological process in a SBR. The results of this pilot-scale SBR monitoring system using simple on-line measurements clearly demonstrated that the adaptive and nonlinear monitoring technique showed lower false alarm rate and physically meaningful, that is, robust monitoring results.  相似文献   

6.
Concentrations of six endocrine-disrupting compounds (EDCs), bisphenol A (BPA), estrone (E(1)), 17β-estradiol (E(2)), estriol (E(3)), 17α-ethynylestradiol (EE(2)) and diethylstilbestrol (DES), were assessed in influents, effluents and excess sludge in ten municipal wastewater treatment plants (WWTPs) in the Three Gorges Reservoir (TGR) area, Chongqing, China. Three types of activated sludge treatment processes, oxidation ditch (OD), reversed anaerobic-anoxic-oxic (rA(2)/O) technology and sequential batch reactor (SBR), were used in the surveyed WWTPs. These WWTPs were all combined landfill leachate-sewage treatment plants. All analytes were extracted by solid-phase extraction (SPE) in the dissolved phase and by accelerated solvent-based extraction (ASE) in sludge. Gas chromatography-mass spectrometry (GC-MS) was employed for the analysis of EDCs. Among these EDCs, BPA was the most frequently detected and abundant compound (100.0-10566.7 ng L(-1), 15.5-1210.7 ng L(-1) and 85.0-2470.4 ng g(-1) with respect to the influents, effluents and excess sludge samples). The greatest levels of steroidal estrogens in municipal influents were observed in E(3) which were all >100 ng L(-1), followed by E(1) (42.2-110.7 ng L(-1)) and E(2) (7.4-32.7 ng L(-1)), and in the effluents and sludge were E(1) > E(3) > E(2) which were all <31 ng L(-1) and 105 ng g(-1), respectively. Regarding synthetic estrogens, EE(2) was frequently detected in the influents, occurring below 50 ng L(-1), while DES was not detected at all. A high correlation coefficient was observed between the leachate-sludge ratio and concentrations of influent EDCs, and it was statistically significant (i.e., R > 0.65, P < 0.05), but removal efficiency of the EDCs did not show significant differences with OD, rA(2)/O and SBR processes. Furthermore, modification of treatment technology as well as operational parameters, such as hydraulic retention time (HRT), sludge retention time (SRT) and disinfection process (DP), were recommended to further eliminate the residual EDCs.  相似文献   

7.
Occurrence of five non-steroidal anti-inflammatory drugs (salicylic acid, ibuprofen, naproxen, indomethacin and diclofenac) and three lipid regulators (bezafibrate, clofibric acid and gemfibrozil) was investigated in wastewater, sewage sludge, and river water of the urban section of the Pearl River at Guangzhou in South China. Behavior and fate of the pharmaceuticals during treatment in two sewage treatment plants (STPs) were also studied in depth by determining concentrations in the influents and effluents at major treatment units and the sewage sludge. Concentrations of the pharmaceuticals in the raw wastewater were mostly at ng L(-1) levels except salicylic acid whose concentrations ranged from 9.6 to 23.3 μg L(-1). No significant amount of the pharmaceuticals was detected in the suspended particulate matter of wastewater and sewage sludge. Salicylic acid, indomethacin, and naproxen were almost completely removed (≥ 99%); gemfibrozil, ibuprofen and bezafibrate were significantly removed (>75%), whereas diclofenac and clofibric acid were removed by 60-70% during treatment in the STPs. Generally, biodegradation was the governing process for elimination of the investigated pharmaceuticals. Anaerobic biodegradation was responsible for most of the removal of diclofenac whereas aerobic biodegradation also played an important role in elimination of the other pharmaceuticals except SA, which was nearly completely removed after the anoxic process. In the Pearl River, the pharmaceuticals were widely detected. Both the concentrations and detection frequency were higher in March 2008 than those in the other seasons, which may be ascribed mainly to less dilution caused by lower precipitation. Besides the STPs, urban canals directly connected with the Pearl River may also be important contributors to the pharmaceutical contamination in the river.  相似文献   

8.
Textile industry needs to recover and reuse its wastewater as to fulfil the demand of increasingly strict regulations. The characterization of dyeing wastewater samples according to textile fiber and final textile effluent enables the application of different treatment methods. This study aims to characterize dyeing wastewater in black color of polyamide, polyester, and viscose fibers and final textile effluent. Samples were collected and characterized completely for major pollution indicator parameters. Dyeing wastewater of polyester showed higher values for some parameters, e.g., 4994.44% (49,944,400 mg L?1 and 917 NTU) of turbidity and 4100.00% of phenol when compared to dyeing wastewater of other fibers. Other parameters such as pH, alkalinity, color, phosphorus, nitrogen, sulfides, chlorides, oil and grease, dissolved solids, and chemical and biochemical oxygen demand were also assessed. In addition to individual characterization, this study also presents a correlation of the contribution of each parameter to the final textile effluent. Although dyeing wastewater of polyamide contributes the most in terms of quantity for the final effluent, this study revealed that dyeing wastewater of polyester influenced the most on the final composition of the textile wastewater when evaluating color, turbidity, total iron, biochemical oxygen demand, chemical oxygen demand, phenol, mercury, oil and grease, and total phosphorus. The present study is focused on bringing new insights to provide future research with other strategies to improve the treatment of dyeing wastewater. In addition, some suggestions are also given for wastewater treatments according to type of textile fiber.  相似文献   

9.
Biofilms are present in several areas and are studied in microbiology, medical sciences, biology and, of course, sanitary engineering. Biofilms are used for the treatment of municipal wastewater, and their application was even before the invention of the activated sludge process. The main objective of this work was to develop a simple, fast and low-cost technique to evaluate the nature of the first decay in the concentration of an organic compound in the presence of a solid material. Though simple, the technique developed has allowed the clarification of whether the initial concentration decay is due to adsorption to the support material or a result of biodegradation. The results show that, with two different support materials, adsorption does not take place, and the biodegradation processes are responsible for the first decay in the organic concentration. The technique used offers a fast and low-cost way of studying the existence of adsorption. Two feed concentration solutions and two different support materials were used.  相似文献   

10.
The potential biodegradation and subsequent transformation of 17β-estradiol (E2) to estrone (E1) were examined in the presence of various dissolved organic matter (DOM) isolated from effluent, river and lake waters. In addition, estrogenicity was estimated in association with the removal of E2 via its sorption onto DOM and biodegradation. The more biodegradable lake-derived DOM promoted more extensive transformation of E2 into E1 than the effluent organic matter through a biodegradation process. Overall, under all conditions, biodegradation dominated the removal of E2 in water. The increased dissolved organic carbon (DOC) concentrations in river and lake-derived DOM (e.g. 6.5 mg C L(-1)) reduced the removal of E2 by decreasing its biodegradation due to the moderate sorption of E2 onto DOM. The effluent organic matter showed greater removal of E2 via biodegradation, as well as significantly high sorption. This was associated with a large amount of hydrophobic fulvic acid (FA)- and humic acid (HA)-like organic components, as shown by the small increase in the specific UV absorbance at 254 nm (SUVA(254)). An increase in the DOC concentration reduced the removal of E2, resulting in high estrogenicity. The present study suggests that both organic composition and DOC concentration influenced the removal of E2 and, therefore, should be fully considered when assessing estrogenicity and its impacts on the aquatic environment.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号