The effect of atmospheric pollution on α-glycerophosphate dehydrogenase activity in the satin moth (Leucoma salicis (L.))

The purpose of this study was to investigate how various combinations of atmospheric pollutants may affect -GPDH activity in the satin moth. Enzyme activity was measured in crude larva and pupa as well as in hoogenates from the fat body and thoracic muscles of adults. The insects were divided into five groups and treated with dust (containing heavy metals) and gaseous pollutants (SO₂, NO_x) in different concentrations. Specific activity of -GPDH was the highest in thoracic muscles of adult satin moth and was significantly higher in males, regardless of their origin. Low concentration of SO₂ caused stimulation of enzyme activity but simultaneous action of SO₂, NO_x and heavy metal containing dust with accompanied acid precipitation caused inhibition of -GPDH activity, probably as the result of sulphite bounds with pyridine and flavin nucleotides.     

Spatio-Temporal Variations of Sulphur Dioxide Patterns with Wind Conditions in Central Taiwan

Sulphur dioxide (SO₂) is one of the main atmospheric pollutants in central Taiwan. This article analyses the SO₂ concentration seasonal variations and spatial distribution using data obtained from ten air quality monitoring stations and the Taiwan Weather Bureau. It reveals that SO₂ concentration is high in winter and low in summer and that high concentration centers are located south of the Taichung coal-fired power plant, the main source of SO₂ emissions in the region.The location of high concentration centers changeswith different prevailing winds. SO₂ variations due towind direction are not unique. During short periods,when meteorological conditions are constant, variationin the pollution sources cause variations in thespatial distribution. This has been deduced byappreciation of Intervention analysis to time seriesof hourly data.     

Air pollution and diseases of the respiratory tracts in pre-school children: A transfer function model

The purpose of the present statistical analysis was the assessment of the relation between time series of environmental factors and of frequencies of diseases of the respiratory system in pre-school children. During about one year, daily measurements of air pollutants and climatic variables were taken. During the same period of time two series of medical data were collected: (i) The daily relative number of pre-school children, exhibiting diseases of the respiratory tracts who either came to the outpatients' clinic of the children's hospital or were reported by paediatricians in Basle (ENTRIES). (ii) The daily relative frequency of symptoms of the respiratory tracts observed in a group of randomly selected pre-school children (SYMPTOMS).By means of transfer function models the relation between the two target variables and the explaining variables was analysed. Several practical problems did arise: Choice of the appropriate transformation of the different series, interpretation of the crosscorrelation function using different methods of prewhitening, time splitting and nonstationarity of the crosscorrelation structure. In particular, it was found that after prewhitening the crosscorrelation function between the explanatory series SO₂ and the response series SYMPTOMS changes with time. While during the winter period an instantaneous relation between these two series (and to a lesser extent between NO₂ and SYMPTOMS) was identified, no such relation was found for the other seasons.     

Effect of Temperature on Absorption Efficiency of NO2 in Arsenite Method

The sodium arsenite method developed by Jacobs andHochheiser is one of the most widely used manualmethods for nitrogen dioxide (NO₂) monitoring inambient air, particularly in developing countries. Asreported, the method gives 82% NO₂ absorptionefficiency (NAE) in the concentration range from 40 to750 g/m³, when only one impinger tube isemployed in the sampling train at a flow rate of 0.2lpm and for 24 h sampling duration. Accordingly,a uniform correction factor (0.82) is used indenominator to calculate the ultimate concentration ofNO₂ in ambient air.In the present investigation, the effect oftemperature on absorption efficiency of NO₂ isstudied employing four impinger tubes in series tocollect the maximum NO₂ generated in the gasstream. The study conducted at 16, 26 and 36 °Ctemperatures shows maximum absorption efficiency(average) of 87.8% at 26°C in 1st impingertube. At lower and higher temperatures, it is foundconsiderably less. A suitable correction factor,therefore, must be applied to estimate actual NO₂concentration in ambient air using arsenite method, intropical countries like India, where atmospherictemperature variations are large (less than 5°Cin winter and more than 45°C in summer).     

Roadside Concentration of Gaseous and Particulate Matter Pollutants and Risk Assessment in Dar-Es-Salaam, Tanzania

This study used manual air sampling method to assess the contribution of road traffic to air pollution level in Dar-es-Salaam City, Tanzania. Samples were collected from 11 different sites. Parameters measured were: sulphur dioxide using pararosaniline method, nitrogen dioxide using saltzman method, particulate matter and particulate lead using filtration method and atomic absorption spectrometric method, respectively. Results showed that hourly average sulphur dioxide concentration range from 127 to 1385 g/m³. The measured values of sulphur dioxide were above the recommended WHO guidelines with an hourly objective value of 350 g/m³ at 87% of the sampling sites. The hourly average nitrogen dioxide concentration ranged from 18 to 53 g/m³. The maximum hourly nitrogen dioxide concentration at 53 g/m³ was below the WHO guideline value of 200 g/m³. The hourly average suspended particulate matter (SPM) ranged from 98 to 1161 g/m³, exceeding the recommended value of 230 g/m³ by WHO at 87% of the sampling sites. The hourly average lead concentration was found to range from 0.60 to 25.6 g/m³, exceeding again the WHO guideline value of 1.5 g/m³at 83% of the sampling sites. Results predicted by Gaussian model when compared with the measured values were found to have a correlation coefficient of 0.8, signifying a good correlation. The risk assessment was undertaken considering the people who spend a significant portion of their time near the roads, such as the Uhuru primary school pupils and the adult population who reside by the roadside. The unit risk realised was 18.2 × 10^–6 for adult population and 2.2 × 10^–6 for pupils, both scenarios showing risk higher than the United Sates of America Environmental Protection Agency (USEPA) acceptable limit of 1× 10^–6. Considering the magnitude of the problem at hand, this study recommends an introduction of mandatory emission tests of SPM, lead and sulphur dioxide (SO₂). The study further recommends the introduction of continuous and/or regular air quality monitoring and the use non-leaded petrol in Tanzania.     

Non-discharging evapotranspiration bed system for wastewater disposal at Lincoln

A non-discharging evapotranspiration bed system installed on a dairy farm at Lincoln University was studied to evaluate actual evapotranspiration rate, ET _a , to develop and validate a water balance model for the system, and to assess the feasible application of the vaporative concept for wastewater disposal in the immediate geographic area. Observations, measurements, and calculations indicate that ET _a was slightly higher than the meteorologically estimated Penman potential ET (ET _p ) for the study period, and a ratio =ET _a /ET _p =1.21 was obtained. A water-balance equation of the system which can be used in different climatic conditions was obtained and can be written as W=Q+PPTN–Et _a ; where W is the variation of storage water in the bed (in mm), Q is the effluent wastewater (in mm), and PPTN is the total precipitation. It was also observed that a truly non-discharging ET bed system's feasible application in the study location may be highly questionable. This is due to the fact that the precipitation rate for the location generally exceeds the ET _p during critical Winter months. However, two possibilities of improving the performance of the system were found and suggested for further studies. The suggestions were (1) to design the system with its surface adequately crowned to shed large amounts of rain water falling on it, and (2) to design a winter-sheltered-non-discharging ET bed which would consist of an ET bed with a removable transparent plastic roof to shed the total amount of rain water and act as a green house     

Nitrogen isotope ratios in pine bark as an indicator of N emissions from anthropogenic sources

The article describes the use of Scots pine bark to identifynitrogen sources in eastern Germany, as well as background areas in Russia and Bulgaria, by using natural isotope ratios of total nitrogen (N_t) and individual N compoundssuch as ammonium (NH₄ ⁺), nitrate (NO₃ ^-)and amid nitrogen (amide-N). The samples collected were analysed using an elemental analyser in connection with a gas isotope mass spectrometer (EA-IRMS). Natural ¹⁵N abundances in pine bark from impact areas suggest that the ammonium accumulated on the surface of the bark is releasedfrom livestock management. Bark of Scots pines growing near agricultural land had highly depleted ¹⁵N_t values (between –8 and –12), while bark from background areas (unpolluted areas) displayed slightly negative ¹⁵N_t values (mean ¹⁵N_t = –3.8). It is assumed that part of the N adsorbed on the bark surface is mainly derived from ammonia(mean ¹⁵N_t = –40.3) escaping from livestock housing and during the application of manure. This assumption is confirmed by experiments under controlled conditions in which manure samples were spread on soil. In addition, temporal and spatial variations of ¹⁵N_t abundances in pine bark from various locations in eastern Germany as wellas pine stands in Nature Park Dübener Heath are discussed.     

Performances and application of a passive sampling method for the simultaneous determination of nitrogen dioxide and sulfur dioxide in ambient air

The performances and applicability of a diffusion tubesampler for the simultaneous measurements of NO₂ andSO₂ in ambient air were evaluated. SO₂ andNO₂are collected by the passive sampler using triethanolamine astrapping agent and are determined as sulphate and nitrite withion chromatography. The detection limit (2.3 g m^-3 ofNO₂ and 4.2 g m^-3 of SO₂ for two weekssampling) is adequate for the determination of concentrationsin urban and industrial areas. Precision of the method as RSDis in mean 5% for NO₂ and 12% for SO₂ at theconcentration levels in urban areas. Calibration of the methodwas performed in the field conditions by comparison between theresponses of sampler and the concentrations measured by thecontinuous monitors. High degree of linearity (correlationcoefficients > 0.8) is found between the passive sampler tubeand the continuous monitor data for both NO₂ and SO₂.To reduce the wind velocity influence on passive sampling ofdiffusion tubes, a protective shelter was tested in this study.The overall uncertainty of one measure for the optimised methodis estimated at 5 g m^-3 for NO₂ and 6g m^-3 for SO₂. Suitability of this passivesampling method for air pollution monitoring in urban areas wasdemonstrated by the results shown in this paper on a campaigncarried out in the French agglomeration.     

Monitoring the results of Canada/U.S.A acid rain control programs: some lake responses

Aquatic acidification by deposition of airborne pollutants emerged as an environmental issue in southeastern Canada during the 1970s. Drawing information from the extensive research and monitoring programs, a sequence of issue assessments demonstrated the necessity of reducing the anthropogenic emissions of acidifying pollutants, particularly sulphur dioxide (SO₂). The 1991 Canada-U.S. Air Quality Agreement (AQA) was negotiated to reduce North American SO₂ emissions by 40% relative to 1980 levels by 2010, and at present, both countries have reduced emissions beyond their AQA commitment. In response to reduced SO₂ emissions, atmospheric deposition of sulphate (SO₄ ^2–) and SO₄ ^2– concentrations in many lakes have declined, particularly in south-central Ontario and southern Québec. Sulphate deposition still exceeds aquatic critical loads throughout southeastern Canada however. Increasing pH or alkalinity (commonly deemed recovery) has been observed in only some lakes. Several biogeochemical factors have intervened to modify the lake chemistry response to reduced SO₄ ^2– input, notably release of stored SO₄ ^2– from wetlands following periods of drought and reduction in the export of base cations from terrestrial soils. Three examples from Ontario are presented to illustrate these responses. Significant increases in pH and alkalinity have been observed in many lakes in the Sudbury area of Ontario due to the large reductions in local SO₂ emissions; early-stage biological recovery is evident in these lakes. An integrated assessment model predicts that AQA emission reductions will not be sufficient to promote widespread chemical or biological recovery of Canadian lakes. Monitoring and modeling are mutually supporting assessment activities and both must continue.     

Exposure estimates in assessing helath effects of air pollution

Air pollution has been associated with adverse health effects. Difficulties in interpreting studies of health effects of exposure to air pollution arise in estimating exposure. Until recently, studies of effects of air pollution have relied on pollution exposure measurements obtained from fixed location air pollution stations monitoring outside air (to evaluate compliance with air quality standards, rather than to examine population exposure). However, recent evidence suggests that there are substantial differences between air pollution levels measured at such sites and levels to which people are actually exposed, i.e. personal exposure. The present study examines effects of ambient urban air pollution on persons suffering from asthma, healthy non-asthmatic subjects and school children (in 2 Canadian cities, Toronto and Hamilton). Air pollution exposure is being assessed by data obtained from: (1) conventional abatement oriented fixed location air pollution monitoring stations, (2) an extensive population oriented network, (3) inside and (4) outside structures (homes and schools) as well as (5) personal air pollution samplers. The data indicate variability in these different estimates of exposure which have implications on health effects assessment.     

Ambient Air Quality Status in Raniganj-Asansol Area, India

This investigation presents the assessment of ambient air quality with respect to suspended particulate matter (SPM), sulphur dioxide (SO₂) and oxides of nitrogen (NO_X) at four sites (RGC, SRS, BBC and BCC) in the Raniganj-Asansol area in West Bengal, India. Ambient air was monitored with a sampling frequency of twenty four hours (3 × 8 hours) at each site on every alternate day (3 days a week) covering a period of one year. A total of 429 samples were collected from RGC, 429 from SRS and 435 each from the BBC and BCC sites. Meteorological parameters such as temperature, relative humidity, wind-speed and wind-direction were also recorded simultaneously during the sampling period. Monthly and seasonal variation of these pollutants have been observed and recorded. The annual average and range values have also been calculated. Results of the investigation indicates that the 95th percentile values of SPM levels exceed the limits (200 g m^-3) at RGC, SRS and BBC sites and is within the limit of 500 g m^-3 at the BCC sites. The 95th percentile values of SO₂ levels did not exceed the reference level at any of the monitoring stations. The 95th percentile values of NO_X are found to be exceeding the limit (80 g m^-3) at RGC, SRS and BBC sites but is within the prescribed limit of 120 g m^-3 at the BCC site. Further, it has been observed that the concentrations of the pollutants are high in winter in comparison to the summer or the monsoon seasons. Results of the investigation indicates that industrial activities, indiscriminate open air burning of coal by the local inhabitants for cooking as well as coking purposes, vehicular traffic, etc. are responsible for the high concentration of pollutants in this area.     

Occurrence of Acid Rain over Delhi

Precipitation samples were collected as wet-fall only andprimarily on event basis in Delhi during the monsoon period of1995. Concentrations of major anions (SO₄ ^2-,NO₃ ^- and Cl^-) andcations (Ca²⁺, Mg²⁺,Na⁺ and K⁺) were determined. The pH of the rain waterwas found to be more than 5.6, showing alkalinity during theearly phase of monsoon, but during the late phase of monsoon pHtendency was towards acidity due to lack of proper neutralizationof acidic ions. Neutralization is not only due to the localprocess but also due to the pre-monsoon Andhi which bringsSuspended Particulate Matter (SPM) containing Ca²⁺,Mg²⁺, Na⁺ and K⁺ as well as the local emission ofNH₃. In the late monsoon the concentration of cations getsreduced because of heavy rainfall and relatively unfavourablecondition for their transport from the adjoining areas, whereasthe anion concentrations remain unchanged owing to theircontinuous emission.     

Using Mussel Isotope Ratios to Assess Anthropogenic Nitrogen Inputs to Freshwater Ecosystems

Stable nitrogen isotope ratios (¹⁵N) of freshwater mussels from a series of lakes and ponds wererelated to watershed land use characteristics to assess their utility in determining the source ofnitrogen inputs to inland water bodies. Nitrogen isotope ratiosmeasured in freshwater musselsfrom 19 lakes and ponds in Rhode Island, U.S.A., ranged from4.9–12.6 and were found tosignificantly correlate with the fraction of residential development in 100 and 200 m bufferzones around the ponds. Mussel ¹⁵N values in 12 of the 19 ponds also showed significantcorrelation with average dissolved nitrate concentrations, which ranged from 23–327 g L^-1.These observations, in light of previous studies which link elevated¹⁵N values of nitrogenderived from septic wastewater with those seen in biota, suggest that mussel isotope ratios mayreflect nitrogen source in freshwater ecosystems. We followed aniterative approach usingmultiple regression analysis to assess the relationship between mussel¹⁵N and the land usecategories fraction residential development, fraction feedlotagriculture, fraction row-cropagriculture, and fraction natural vegetation in 100 and 200 m bufferzones and pond watersheds.From this we developed a simple regression model to predict mussel¹⁵N from the fraction ofresidential development in the 200 m buffer zone around the pond.Subsequent testing with datafrom 16 additional sites in the same ecoregion led us to refine themodel by incorporating thefraction of natural vegetation. The overall average absolute differencebetween measured andpredicted ¹⁵N values using the two-parameter model was 1.6. Potential sources of error inthe model include differences in the scale and categorization ofland-use data used to generate andtest the model, differences in physical characteristics, such asretention time and range ofresidential development, and exclusion of sources of enrichednitrogen such as runoff from feedlot operations or increased nitrogen loading from inefficient or failed septic systems.     

Application of remote sensing to exposure monitoring

Although exposure assessments cannot be completed remotely, remote sensing techniques provide an invaluable adjunct in exposure monitoring programs. Exposure can be defined as the summation over time, in all media, of the amount of a pollutant available at the exchange boundaries of the receptor during a specified period. This paper describes a few remote monitoring techniques that provide direct measurement input into an exposure assessment and several that furnish quantitative or qualitative information leading to decisions regarding how to monitor, such that the source-exposure-dose relationships can be fully defined. Two general classes of remote sensing systems are included in this discussion-passive and active. Passive systems depend on a measurement of the energy reflected or emitted by a target and active systems use an energy source, e.g., a laser to perform the environmental interrogation. Airborne as well as ground-based remote monitoring measurements or systems are also considered in this paper.     

Methane in ocean waters: Concentration and carbon isotope variability at East Pacific Rise and in the Arabian Sea

Methane concentrations and stable carbon isotope ratios of water samples from the East Pacific Rise (EPR) at 21°S and the Arabian Sea (24°N, 65°E) have been determined. EPR surface water is in equilibrium (ca. 50 nl/L and –50<¹³CH₄<–46) with atmospheric methane. Deep background water has the signature of the remaining fraction of atmospheric methane partially oxidized in the water column by bacteria. Bottom near, hydrothermally influenced vent methane (>100nl/L and –30<¹³CH₄<–22) is detectable only close to the seep site. There is no input of hydrothermal methane into the atmosphere. EPR water is considered to be rather a sink than a source of atmospheric methane. Surface waters of the Arabian Sea are enriched in methane relative to the atmosphere (source for atmospheric methane). Carbon isotope ratios point to a bacterial origin of methane (¹³CH₄<–55) that is generated in the surface waters. Concentration changes and variations of carbon isotope ratios also suggest that methane seeping from the sea floor sediments of the Arabian Sea is oxidized by bacterial activity and does not reach the atmosphere.     

Ambient hydrogen sulphide levels at a wastewater treatment plant

This paper describes a novel technique of measuring ambient hydrogen sulphide (H₂S) concentrations simultaneously at several locations around a wastewater treatment plant. A commercially purchased H₂S monitor is modified to operate in a static mode to enable degree of darkening on pieces of lead acetate tapes to be correlated againts the exposure duration and the ambient H₂S concentration of sewage air. The technique can yield mapped contours of time—average H₂S concentrations as low as 0.2 ppm. The methodology is exemplified for a wastewater treatment plant in Ipswich, Queensland. Isopleths of H₂S concentration obtained at the wastewater site for two different meteorological conditions reveal that high levels of H₂S are detected around the plant's inlet structure and primary clarifiers.     

Near Field Dispersion in the Urban Environment - A Hydraulic Flume Study

The dispersion of material released from a point source immediately upwind of an obstacle array has been examined in a hydraulic flume with a low level of background turbulence. The main purpose of the experiments was to examine the interaction of the plume and the internal boundary layer (IBL) created over the obstacle array. The obstacle array consisted of 11 rows of cubes at 16% packing density in a staggered arrangement. Plume dispersion was measured using flow visualization with Rhodamine dye and also with a thermal tracer technique. During the experiments the source release height was varied between z = 0 and z = 4H, where H is the obstacle height. For the low-level releases, the upper boundary of the plume followed the growth of the IBL over the array. For higher level releases (z/H 2) the rate of plume growth was much reduced until the point downstream where it descended into the IBL, after which it experienced the intense turbulent mixing within the array. This suggests that the urban lateral spread parameter _y should be a strong function of height in situations where the turbulence level in the ambient approach flow is low. These results highlight the importance of the ambient turbulence even in strongly obstacle-affected dispersion.     

Measurements of SO2, NO X and SPM in an industrial area at the Aegean coast of Turkey

Data from continuous measurements of SO₂ NO _x , suspended particulate matter (SPM) and meteorological parameters at seven sites around a highly industrialized region in the Aegean coast of Turkey, between July 15, 1991 to July 31, 1992 were used to evaluate spatial and temporal variations of air quality parameters. Low annual averages and insignificant differences between day and night concentrations were observed at stations far from sources. At stations close to sources, annual average concentrations were high and diurnal patterns were significant. Annual average SO₂ and SPM concentrations in all stations used the Krigging technique to assess the impact of industries on air quality in the surrounding airshed. Results have demonstrated that Turkish air quality standards for SO₂ were exceeded in a circle with a radius of 4 km and which was centered on the petrochemical complex and refinery. Similarly, standards for SPM were exceeded in a circle with a radius of 1.2 km and which was centered on the ironwork plants. Both SO₂ and SPM showed well defined diurnal variations, particularly in stations close to sources. The SO₂ concentrations showed a maximum during day-time, while SPM concentrations peaked after midnight. Although annual average SO₂ and SPM concentrations were highly variable depending on distances between stations and sources, background concentrations of the same pollutants, calculated by stripping episodes from data, did not change significantly from one station to another. Long range transport and resuspension of local soil were suggested as sources of background SO₂ and SPM, respectively. The difference between observed and background concentrations of SO₂ and SPM in each station was related to the impact of industries on air quality at that particular site.     

Application of CFD Methods for Modelling in Air Pollution Problems: Possibilities and Gaps

Different urban air pollution problems deal with complex structure of air flows and turbulence. For such problems the Computer Fluid Dynamics (CFD) methods become widely used. However, this approach despite a number of advantages has some problems. Experience of use of CFD tools for development of models and suggestions of their applications for a local scale air pollution over a complex terrain and stable stratification are discussed in this paper, including: Topography and complex geometry: choose of the co-ordinate system and computer grid; Turbulence closure for air pollution modelling: modified k- model for stable stratified ABL; Boundary conditions for vertical profiles of velocity for stable-stratified atmosphere; Effects of the radiation and thermal budget of inclined surfaces to dispersion of pollutants; Artificial sources of air dynamics and circulation.Some examples of CFD applications for air pollution modelling for a flat terrain, mountainous area, mining open cast and indoor ventilation are discussed. Modified k- model for stably-stratified ABL is suggested. Due to the isotropic character of the k- model a combination of it in vertical with the sub-grid turbulence closure in horizontal can be more suitable for ABL. An effective scheme of boundary conditions for velocity profiles, based on the developed similarity theory for stable-stratified ABL, is suggested. Alongside with the common studies of atmospheric dispersion, the CFD methods have also demonstrated a good potential for studying anthropogenic and artificial-ventilation sources of air dynamic and circulation in local-scale processes of air pollution.     

Soil-Water Partitioning and Desorption Hysteresis of Volatile Organic Compounds from a Louisiana Superfund Site Soil

The adsorption and desorption of three volatile organic compounds (1,2- dichloroethane, 1,1,2- trichloroethane and 1,1,2,2-tetrachloroethane) from a previously uncontaminated clayey soil sample from a Superfund site in North Baton Rouge,Louisiana was studied. In the linear range of the adsorption isotherm, the partition constants were not affected by the presence of the co-solutes. The adsorption isotherms over a wide concentration range on the soil followed the nonlinearFreundlich isotherm. The desorption of the compounds showedsignificant hysteresis at all concentrations studied. Approximately 20 to 70% of the adsorbed mass of organic compounds resisted the desorption even after five months ofsuccessive desorption steps. The desorption of four compounds(1,2-dichloroethane, 1,1,2-trichloroethane, 1,4-dichlorobenzeneand hexachlorobutadiene) from a contaminated soil sample fromthe same site was also studied. The aqueous concentration declined as the successive desorption steps progressed. For hexachlorobutediene the desorption can be visualized as occurring in two stages. The first stage involved a loosely bound or reversible fraction and the second stage involveda tightly bound or resistant fraction.