Almond shell activated carbon: adsorbent and catalytic support in the phenol degradation

In this work, two technologies are studied for the removal of phenol from aqueous solution: dynamic adsorption onto activated carbon and photocatalysis. Almond shell activated carbon (ASAC) was used as adsorbent and catalytic support in the phenol degradation process. The prepared catalyst by deposition of anatase TiO₂ on the surface of activated carbon was characterized by scanning electron microscopy, sorption of nitrogen, X-ray diffraction, Fourier transform infrared (FT-IR) spectroscopy, and pH_ZPC point of zero charge. In the continuous adsorption experiments, the effects of flow rate, bed height, and solution temperature on the breakthrough curves have been studied. The breakthrough curves were favorably described by the Yoon–Nelson model. The photocatalytic degradation of phenol has been investigated at room temperature using TiO₂-coated activated carbon as photocatalyst (TiO₂/ASAC). The degradation reaction was optimized with respect to the phenol concentration and catalyst amount. The kinetics of disappearance of the organic pollutant followed an apparent first-order rate. The findings demonstrated the applicability of ASAC for the adsorptive and catalytic treatment of phenol.     

Pathways and Kinetics on Photocatalytic Destruction of Aqueous Phenol

In this study, the TiO₂ photocatalytic decomposition process of aqueous phenol was investigated. The intermediate products generated in the elementary reaction steps in the mineralization process were experimentally identified as hydroquinone, catechol and hydroxyhydroquinone. The concentration variations of these intermediate products with time passage were traced by high performance liquid chromatograph. The pathways of the decomposition process were given. Based on Langmuir isothermal theory and Langmuir-Hinshelwood mechanism, the multi-compounds competition kinetic model was established. In this model, the observed time-dependent concentrations of phenol and the intermediate products were simulated.     

Toxicity assessment of textile effluents treated by advanced oxidative process (UV/TiO2 and UV/TiO2/H2O2) in the species Artemia salina L.

Textile industry wastes raise a great concern due to their strong coloration and toxicity. The objective of the present work was to characterize the degradation and mineralization of textile effluents by advanced oxidative processes using either TiO₂ or TiO₂/H₂O₂ and to monitor the toxicity of the products formed during 6-h irradiation in relation to that of the in natura effluent. The results demonstrated that the TiO₂/H₂O₂ association was more efficient in the mineralization of textile effluents than TiO₂, with high mineralized ion concentrations (NH ₄ ⁺ , NO ₃ ^? , and SO ₄ ^2? ) and significantly decreased organic matter ratios (represented by the chemical oxygen demand and total organic carbon). The toxicity of the degradation products after 4-h irradiation to Artemia salina L. was not significant (below 10 %). However, the TiO₂/H₂O₂ association produced more toxicity under irradiation than the TiO₂ system, which was attributed to the increased presence of oxidants in the first group. Comparatively, the photogenerated products of both TiO₂ and the TiO₂/H₂O₂ association were less toxic than the in natura effluent.     

Synthesis of magnetic carbon nanotube and photocatalytic dye degradation ability

In this paper, magnetic carbon nanotube (M-CNT) was synthesized. The photocatalytic dye degradation ability of M-CNT in the presence of hydrogen peroxide (H₂O₂) from colored wastewater was studied. Manganese ferrite (MnFe₂O₄) was synthesized in the presence of multiwalled carbon nanotube. Direct Red 23 (DR23), Direct Red 31 (DR31), and Direct Red 81 (DR81) were used as anionic dyes. The characteristics of M-CNT were investigated using Fourier transform infrared (FTIR), X-ray diffraction (XRD), and scanning electron microscope (SEM). The photocatalytic dye degradation using M-CNT was studied by UV–vis spectrophotometer and ion chromatography (IC). The effects of M-CNT dosage, initial dye concentration, and salt on the degradation of dye were evaluated. Formate, acetate, and oxalate anions were detected as dominant aliphatic intermediates. Inorganic anions (nitrate and sulfate anions) were detected and quantified as the mineralization products of dyes during the degradation process. The results indicated that the M-CNT could be used as a magnetic catalyst to degrade anionic dyes from colored wastewater.     

Photocatalytic degradation of NOx in a pilot street canyon configuration using TiO2-mortar panels

Titanium dioxide is the most important photocatalysts used for purifying applications. If a TiO₂- containing material is left outdoors as a form of flat panels, it is activated by sunlight to remove harmful NOx gases during the day. The photocatalytic efficiency of a TiO₂-treated mortar for removal of NOx was investigated in the frame of this work. For this purpose a fully equipped monitoring system was designed at a pilot site. This system allows the in situ evaluation of the de-polluting properties of a photocatalytic material by taking into account the climatologic phenomena in street canyons, accurate measurements of pollution level and full registration of meteorological data The pilot site involved three artificial canyon streets, a pollution source, continuous NOx measurements inside the canyons and the source as well as background and meteorological measurements. Significant differences on the NOx concentration level were observed between the TiO₂ treated and the reference canyon. NOx values in TiO₂ canyon were 36.7 to 82.0% lower than the ones observed in the reference one. Data arising from this study could be used to assess the impact of the photocatalytic material on the purification of the urban environment.     

Modeling photocatalytic destruction of the organic contaminants in continuous stir flow reactor

Thin-film technique is becoming an industry standard for the preparation of TiO₂-based photocatalyst for organic destruction. The catalyst provides several advantages over the conventional powder TiO₂ in the treatment of wastewater and groundwater. In this study, a continuous stir flow reactor model is developed capable of describing the photocatalytic process. The model incorporates the following fundamental mechanisms: adsorption, diffusion, liquid-film transfer, UV attenuation, and photocatalytic reaction. All of the simulation results indicate that there exists a highly nonlinear relation between each of these parameters and the destruction rate. Various incident light intensities also are incorporated to simulate the energy efficiency. The simulations illustrate that the photocatalytic model can be used to elucidate the effect of process variables. It is also possible to “custom-design” a catalyst for the treatment of a particular waste stream.     

31P-NMR evaluation of organophosphorus pesticides degradation through metal ion promoted hydrolysis

The degradation of some organophosphorus pesticides (OPPs) in the presence of metal ions was studied by ³¹P-NMR spectroscopy. Both ³¹P-NMR and gas chromatography/mass spectroscopy results were used in order to determine the nature of metabolites formed after degradation. The degraded organophosphorus pesticide were investigated for chlorpyrifos and phoxim in the presence of several metal ions including Hg²⁺, Cu²⁺, Cd²⁺, Ni²⁺, Pb²⁺, and Ag⁺. ³¹P-NMR results indicated Ag⁺ and Hg²⁺ ion promoted degradation of OPPs and other metal ions formed complex with OPPs and cannot degrade OPPs. We found that the degradation of chlorpyrifos and phoxim with Ag⁺ or Hg²⁺ led to the formation of O,O-diethyl-O-methyl phosphorothionate, (C₂H₅O)₂(CH₃O)PS, at metal ion/pesticide mole ratios ≤1.0 and completely decomposed at a higher mole ratio of 10. Finally, the method was successfully applied to the degradation study of a number of technical and formulated pesticides in the presence of Ag⁺ ion at a metal ion/pesticide mole ratio of 10.     

珠三角典型城市COVID-19疫情封闭期间臭氧污染的放大效应研究

珠三角地区臭氧(O₃)已经逐步取代颗粒物成为主要大气污染物。对新型冠状病毒肺炎(COVID-19)疫情封闭期间珠三角城市背景污染效应(特别是对O₃的放大效应)进行了量化研究,发现PM_2.5和NO₂质量浓度均为工作日高于节假日,非疫情期高于疫情期。O₃质量浓度节假日高于工作日,其中疫情期节假日浓度最高。减排会增加低温高湿背景下O₃质量浓度,但会降低其极大值,并导致 O₃随温度和相对湿度的变化梯度减弱。疫情封闭期间异地输送对于局地O₃质量浓度的变化贡献突出。叠加疫情封闭影响的春节假期O₃质量浓度比节前工作日增加20.4%~41.7%,与一般年份特征相反,而NO₂降低65.3%~75.6%,降低程度强于一般年份。疫情封闭期春节期间O₃质量浓度比一般年份上升14.0%~25.9%,而NO₂质量浓度降低37.0%~54.5%。低湿晴好的天气为光化学反应提供有利条件,并且疫情封闭扩大了假期人为源减排规模,导致NO_x质量浓度进一步下降,使其对O₃的滴定效应减弱,同时静稳天气有利于O₃浓度的累积,导致局地O₃污染被逐步放大。     

Effects of aqueous suspensions of titanium dioxide nanoparticles on Artemia salina: assessment of nanoparticle aggregation, accumulation, and toxicity

Aquatic stability and impact of titanium dioxide nanoparticles (TiO₂ NPs, 10–30 nm) were investigated using Artemia salina. Acute exposure was conducted on nauplii (larvae) and adults in seawater in a concentration range from 10 to 100 mg/L TiO₂ NPs for 24 and 96 h. Rapid aggregation occurred in all suspensions of TiO₂ NPs to form micrometer size particles. Yet, both nauplii and adults accumulated the aggregates significantly. Average TiO₂ content in nauplii ranged from 0.47 to 3.19 and from 1.29 to 4.43 mg/g in 24 and 96 h, respectively. Accumulation in adults was higher ranging from 2.30 to 4.19 and from 4.38 to 6.20 mg/g in 24 and 96 h, respectively. Phase contrast microscopy images revealed that Artemia were unable to excrete the particles. Thus, the TiO₂ aggregates filled inside the guts. No significant mortality or toxicity occurred within 24 h at any dose. Lipid peroxidation levels characterized with malondialdehyde concentrations were not statistically different from those of the controls (p?>?0.05). These results suggested that suspensions of the TiO₂ NPs were nontoxic to Artemia, most likely due to the formation of benign TiO₂ aggregates in water. In contrast, both mortality and lipid peroxidation increased in extended exposure to 96 h. Highest mortality occurred in 100 mg/L TiO₂ NP suspensions; 18 % for nauplii and 14 % for adults (LC₅₀?>?100 mg/L). These effects were attributed to the particle loading inside the guts leading to oxidative stress as a result of impaired food uptake for a long period of time.     

2014—2018年洛阳市大气污染变化特征及影响因素研究

研究采用空气质量指数法对2014—2018年洛阳市大气污染变化特征进行了分析,构建了空气污染物浓度的影响指标体系,采用灰色关联法研究了空气污染物浓度与影响因子之间的关联度,得到了影响空气污染物浓度的主要指标因子,并提出了改善洛阳市空气质量的措施。结果表明:洛阳市空气质量指数类别主要为良和轻度污染。2014—2018年空气质量为优良的天数主要出现在春季、夏季和秋季,重度污染和严重污染主要出现在冬季。2018年PM₁₀、PM_2.5、NO₂、SO₂和CO这5项污染物浓度随时间变化呈"V"型,污染主要集中在1—5月和11—12月。O₃浓度随时间变化呈倒"V"型,污染主要集中在4—9月。研究期内PM_2.5、PM₁₀和O₃是主要污染物。市区总人口、工业(综合)能源消耗量、人均生产总值、城市机动车总数、城市房屋施工面积、人均公园绿地面积、建成区绿化覆盖率和一般工业固体废物产生量等8项指标因子与PM_2.5、PM₁₀和O₃的浓度表现出高关联度或较高关联度。