Investigations on boron levels in drinking water sources in China

To evaluate boron contamination of public drinking water in China, both dissolved and total boron contents in 98 public drinking water sources from 49 cities, 42 brands of bottled water samples from supermarkets in several cities, and 58 water samples from boron industrial area were measured by inductively coupled plasma-mass spectrometry (ICP-MS). Our experimental results showed that boron existed in public drinking water sources mainly in dissolved status with total concentrations ranging from 0.003 to 0.337 mg/L (mean = 0.046 mg/L). The mean boron concentrations in mineral and pure bottled water were 0.052 and 0.028 mg/L, respectively. The results obtained in this work showed that there was no health risk on view of boron in public drinking water sources and bottled water. In boron industrial area, boron concentrations in surface water and ground water were 1.28 mg/L (range = 0.007–3.8 mg/L) and 18.3 mg/L (range = 0.015–140 mg/L), respectively, which indicated that boron industry caused boron pollution in local water system.     

Public perception and economic implications of bottled water consumption in underprivileged urban areas

This paper presents a comparative assessment of public perception of drinking water quality in two underprivileged urban areas in Lebanon and Jordan with nearly similar cultural and demographic characteristics. It compares the quality of bottled water to the quality of the drinking water supplied through the public network and examines the economic implications of bottled water consumption in the two study areas. Participants' perception of the quality of drinking water provided via the public network was generally negative, and bottled water was perceived to be of better quality in both areas, thus affecting drinking water preferences and consumption patterns. The results reveal that the quality of bottled water is questionable in areas that lack enforcement of water quality standards, thus adding to the burden of an already disadvantaged community. Both areas demonstrated a considerable cost incurred for purchasing bottled water in low income communities reaching up to 26 % of total income.     

Assessment of organochlorine pesticides and plasticisers in the Selangor River basin and possible pollution sources

A study on the quality of water abstracted for potable use was conducted in the Selangor River basin from November 2008 to July 2009. Seven sampling sites representing the intake points of water treatment plants in the basin were selected to determine the occurrence and level of 15 organochlorine pesticides (OCPs), six phthalate esters (PAEs) and bisphenol A (BPA). Results indicated OCPs were still detected regularly in 66.1 % of the samples with the Σ₁₅OCPs ranging from 0.6–25.2 ng/L. The first data on PAEs contamination in the basin revealed Σ₆PAEs concentrations were between 39.0 and 1,096.6 ng/L with a median concentration of 186.0 ng/L while BPA concentration ranged from <1.2 to 120.0 ng/L. Although di-n-butyl phthalate was detected in all the samples, concentrations of di-ethyl(hexyl)phthalate were higher. Sampling sites located downstream recorded the highest concentrations, together with samples collected during the dry season. Comparison of the detected contaminants with the Department of Environment Water Quality Index (DOE-WQI) showed some agreement between the concentration and the current classification of stream water. While the results suggest that the sites were only slightly polluted and suitable to be used as drinking water source, its presence is cause for concern especially to the fragile firefly “Pteroptyx tener” ecosystem located further downstream.     

Water quality status of dugouts from five districts in Northern Ghana: implications for sustainable water resources management in a water stressed tropical savannah environment

This study was primarily aimed at investigating the physicochemical and microbial quality of water in 14 such dugouts from five districts in the northern region of Ghana. Results obtained suggest that except for colour, turbidity, total iron and manganese, many physicochemical parameters were either within or close to the World Health Organisation’s acceptable limits for drinking water. Generally, colour ranged from 5 to 750 Hz (mean 175 Hz), turbidity from 0.65 to 568 nephelometric turbidity units (NTU; mean 87.9 NTU), total iron from 0.07 to 7.85 mg/L (mean 1.0 mg/L) and manganese from 0.03 to 1.59 mg/L (mean 0.50 mg/L). Coliform counts in water from all the dugouts in both wet and dry seasons were, however, above the recommended limits for drinking water. Total and faecal coliforms ranged from 125 to 68,000 colony forming units (cfu)/100 mL (mean 10,623 cfu/100 mL) and <?1 to 19,000 cfu/100 mL (mean 1,310 cfu /100 mL), respectively. The poor microbial quality, as indicated by the analytically significant presence of coliform bacteria in all samples of dugout water, strongly suggests susceptibility and exposure to waterborne diseases of, and consequent health implications on, the many people who continuously patronise these vital water resources throughout the year. In particular, more proactive sustainable water management options, such as introduction to communities of simple but cost-effective purification techniques for water drawn from dugouts for drinking purposes, education and information dissemination to the water users to ensure environmentally hygienic practices around dugouts, may be needed.     

Levels of polycyclic aromatic hydrocarbons (PAHs) in the Densu River Basin of Ghana

The concentrations of 16 polycyclic aromatic hydrocarbons (PAHs) in Densu River Basin in Ghana were measured using gas chromatograph. Surface water samples were collected from nine stations, namely, Potroase, Koforidua Intake, Suhyien, Mangoase, Asuboi, Nsawam Bridge, Afuaman, Ashalaga, and Weija Intake in the Densu Basin. Total PAH concentrations varied from 13.0 to 80.0 ??g/mL in the Densu River, with a mean value of 37.1 ??g/mL. The two- to three-ring PAHs (low-molecular-weight PAHs) were found to be dominant in the Densu River Basin. Total PAH concentrations showed the following pattern: Koforidua Intake (80.0 ??g/mL) > Asuboi (50.8 ??g/mL) > Afuaman (47.9 ??g/mL) > Weija Intake (45.0 ??g/mL) > Suhyien (27.6 ??g/mL) > Nsawam (23.5 ??g/mL) > Ashalaja (22.9 ??g/mL) > Potroase (23.3 ??g/mL) > Mangoase (13.0 ??g/mL). According to the Agency for Toxic Substances and Disease Registry (ATSDR), background levels of PAHs in drinking water supplies in the USA range from 0.004 to 0.024 ??g/mL. PAH levels from all sites exceeded the range set by ATSDR. B[a]P contributed the highest carcinogenic exposure equivalent (0.3 ??g/mL), followed by B[a]A (0.132 ??g/mL) and B[b]F (0.08 ??g/mL), contributing 52.6%, 23.2%, and 4.6%, respectively, of the total carcinogenicity of surface water PAH in the Densu River Basin. The carcinogenic potency was estimated to be 0.57 ??g/mL. The presence of PAHs was an indication of the water sources being contaminated, with potential health implications.     

Bacterial contamination and health risks of drinking water from the municipal non-government managed water treatment plants

Water quality and bacterial contamination from 18 drinking water municipal plants in three locations at Giza governorate were investigated. The average total count of bacteria detected after four stages of treatments in the investigated plants was 32 CFU/1 mL compared to 2330 cfu/mL for raw water, with a reduction percentage of 98.6. Although there is a relatively high removal percent of bacterial contamination from the water sources, however, several bacterial pathogens were identified in the produced water prepared for drinking including Enterococcus faecalis, Escherichia coli, Pseudomonas aeruginosa, and Shigella spp. After 3 days of water incubation at 30 °C, the amount of bacterial endotoxins ranged from 77 to 137 ng/mL in the water produced from the municipal plants compared to 621–1260 ng/mL for untreated water. The main diseases reported from patients attending different clinics and hospitals during summer 2014 at the surveyed locations and assuredly due to drinking water from these plants indicated that diarrheas and gastroenteritis due to E. coli and Campylobacter jejuni constituted 65.7% of the total patients followed by bacillary dysentery or shigellosis due to Shigella spp. (7.9%) and cholera due to Vibrio cholera (7.2%). There was an increase in serum aspartate aminotransferase (AST), alanine aminotransferase (ALT), and alkaline phosphatase (ALP) as well as urea and creatinine values of guinea pigs consuming water produced from the non-governmental plants for 6 months indicating remarkable liver and kidney damages. Histological sections of liver and kidney from the tested animal revealed liver having ballooning degeneration of hepatocytes and distortion and fragmentation of the nuclei, while the section of the kidney showed irregularly distributed wrinkled cells, degenerated Bowman’s capsule, congested blood vessels, and inflammatory cells.     

Flow injection analysis of trace chromium (VI) in drinking water with a liquid waveguide capillary cell and spectrophotometric detection

Hexavalent chromium (Cr(VI)) is an acknowledged hazardous material in drinking waters. As such, effective monitoring and assessment of the risks posed by Cr(VI) are important analytical objectives for both human health and environmental science. However, because of the lack of highly sensitive, rapid, and simple procedures, a relatively limited number of studies have been carried out in this field. Here we report a simple and sensitive analytical procedure of flow injection analysis (FIA) for sub-nanomolar Cr(VI) in drinking water samples with a liquid core waveguide capillary cell (LWCC). The procedure is based on a highly selective reaction between 1, 5-diphenylcarbazide and Cr(VI) under acidic conditions. The optimized experimental parameters included reagent concentrations, injection volume, length of mixing coil, and flow rate. Measurements at 540 nm, and a 650-nm reference wavelength, produced a 0.12-nM detection limit. Relative standard deviations for 1, 2, and 10 nM samples were 5.6, 3.6, and 0.72 % (n?=?9), and the analysis time was <2 min sample^?1. The effects of salinity and interfering ions, especially Fe(III), were evaluated. Using the FIA-LWCC method, different sources of bottled waters and tap waters were examined. The Cr(VI) concentrations of the bottled waters ranged from the detection limit to ～20 nM, and tap waters collected from the same community supply had Cr(VI) concentration around 14 nM.     

Analysis of elemental concentration using ICP-AES and pathogen indicator in drinking water of Qasim Abad, District Rawalpindi, Pakistan

The present study was conducted to investigate drinking water quality (groundwater) from water samples taken from Qasim Abad, a locality of approximately 5,000 population, situated between twin cities Rawalpindi and Islamabad in Pakistan. The main sources of drinking water in this area are water bores which are dug upto the depth of 250–280 ft in almost every house. The study consists of the determination of physico-chemical properties, trace metals, heavy metals, rare earth elements and microbiological quality of drinking water. The data showed the variation of the investigated parameters in samples as follows: pH 6.75 to 8.70, electrical conductivity 540 to 855 μS/cm, total dissolved solids 325.46 to 515.23 ppm and dissolved oxygen 1.50 to 5.64 mg/L which are within the WHO guidelines for drinking water quality. The water samples were analysed for 30 elements (aluminium, iron, magnesium, manganese, silicon, zinc, molybdenum, titanium, chromium, nickel, tungsten, silver, arsenic, boron, barium, beryllium, cadmium, cobalt, copper, gallium, mercury, lanthanum, niobium, neodymium, lead, selenium, samarium, tin, vanadium and zirconium) by using inductively coupled plasma atomic emission spectroscopy. The organic contamination was detected in terms of most probable number (MPN) of faecal coliforms. Overall, elemental levels were lower than the recommended values but three water bores (B-1, B-6, B-7) had higher values of iron (1.6, 2.206, 0.65 ppm), two water bores (B-1, B-6) had higher values of aluminium (0.95, 1.92 ppm), respectively, and molybdenum was higher by 0.01 ppm only in one water bore (B-11). The total number of coliforms present in water samples was found to be within the prescribed limit of the WHO except for 5 out of 11 bore water samples (B-2, B-3, B-4, B-8, B-11), which were found in the range 5–35 MPN/100 mL, a consequence of infiltration of contaminated water (sewage) through cross connection, leakage points and back siphoning.     

A new catalytic oxidation method for sensitive quantification of bromate in flours and bottled water using AgNPs

In this paper, a simple and sensitive spectrophotometric method for the determination of nanomolar level of bromate, based on the catalytic effect of silver nanoparticles on the oxidation of acid red 14 by potassium bromate, is described. The reaction rate was monitored spectrophotometrically by measuring the decrease in absorbance of acid red 14 at 516 nm. The detection limit of the method was 8 ng/mL, and the linear range was between 15 and 130 ng/mL. The effects of acidity, concentration of reactants and reaction time, and external ions were also discussed. The optimum reaction conditions were fixed, and some kinetic parameters determined. The relative standard deviation for the determination of bromate at the concentration of 50 ng/mL was calculated to be 0.996 % (n?=?10). The method has been successfully applied to the determination of bromate in flours and bottled waters.     

Detection of bacterial endotoxin in drinking tap and bottled water in Kuwait

This study was carried out to measure and compare the concentration of bacterial endotoxin in a variety of samples from drinking tap and bottled water available in Kuwait by using the Limulus Amoebocyte lysate test. A total of 29 samples were tested. Samples were collected from a variety of locations throughout the six governorates of Kuwait and 23 brands of local and imported bottled water samples were collected from the local market. The concentration of bacterial endotoxin was measured by using the standard Limulus Amoebocyte lysate test, gel clot method. This study showed that measured endotoxin concentrations in tap drinking water varied from 2.4 to 33.8?EU/ml with the average endotoxin concentration of 14.2?EU/ml. While the results of endotoxin concentrations in the bottled water were <0.03 to 20.1?EU/ml with an average of 1.96?EU/ml. The average concentration of endotoxin in bottled water is 13.5 % of the average concentration of endotoxin in tap drinking water. This experimental investigation has proved that drinking bottled water has less endotoxin as compared to tap water in Kuwait. It is also demonstrated that the endotoxin concentration did not exceed the acceptable level in drinking tap water.     

Quality assessment of various bottled waters marketed in Saudi Arabia

This study focuses on the chemical analysis of the available brands of domestic bottled water in Riyadh City, Saudi Arabia. The distribution of the chemical constituents (major, minor, and trace elements) is determined and compared with the chemical content labeled on the bottles and with drinking water standards of Saudi Arabian, World Health Organization, and U.S. Environmental Protection Agency. The obtained results indicated that except for fluoride and bromate, the concentrations of dissolved salts, soluble cations and anions, nitrate, and trace elements of most bottled waters on sale were within the permissible limits set by standards used. On the other hand, the comparison between determined and reported label values recorded a substantial variation in some parameter values. Results indicated that more than 18 % of the sampled bottled waters exceeded the allowable limits for drinking water. Generated Piper diagrams revealed that the majority of investigated waters were sodium chloride–sulfate type; however, the hydrochemical modeling indicated that all water samples were undersaturated for anhydrite, gypsum, and halite.     

New kinetic-spectrophotometric method for monitoring the concentration of iodine in river and city water samples

A new kinetic method has been developed for the determination of iodine in water samples. The method is based on the catalytic effect of I^? with the oxidation of Indigo Carmine (IC) by KBrO₃ in the sulfuric acid medium. The optimum conditions obtained are 0.16 M sulfuric acid, 1?×?10^?3 M of IC, 1?×?10^?2 M KBrO₃, reaction temperature of 35°C, and reaction time of 80 s at 612 nm. Under the optimized conditions, the method allowed the quantification of I^? in a range of 12–375 ng/mL with a detection limit of 0.46 ng/mL. The method was applied to the determination of iodine in river and city water samples with the satisfactorily results.     

超高效液相色谱串联质谱法测定水体中17种抗生素

建立了一种超高效液相色谱串联质谱法同时测定饮用水源中17种超痕量水平抗生素的分析方法。采用Oasis HLB柱对500 mL pH=5含目标物的水样进行富集，干燥15 min后，用5%氨水甲醇洗脱，氮吹后定容至1 mL。用C₁₈柱吸附目标物，并用0.1%甲酸水和甲醇对目标物进行分离，采用正离子电喷雾电离模式在多反应监测通道中对目标物同时进行分析。该方法检出限为0.07~0.78 ng/L，超痕量水平下回收率范围为75.8%~108%。该方法灵敏度高，精密度为1.8%~15.0%，适用于同时测定饮用水源等水体中的抗生素。     

Nitrate,sulphate and chloride contents in public drinking water supplies in Sicily,Italy

Water samples collected from public drinking water supplies in Sicily were analysed for electric conductivity and for their chloride, sulphate and nitrate contents. The samples were collected as uniformly as possible from throughout the Sicilian territory, with an average sampling density of about one sample for every 7,600 inhabitants. Chloride contents that ranged from 5.53 to 1,302 mg/l were correlated strongly with electric conductivity, a parameter used as a proxy for water salinity. The highest values are attributable to seawater contamination along the coasts of the island. High chloride and sulphate values attributable to evaporitic rock dissolution were found in the central part of Sicily. The nitrate concentrations ranged from 0.05 to 296 mg/l, with 31 samples (4.7% of the total) exceeding the maximum admissible concentration of 50 mg/l. Anomalous samples always came from areas of intensive agricultural usage, indicating a clear anthropogenic origin. The same parameters were also measured in bottled water sold in Sicily, and they all were within the ranges for public drinking water supplies. The calculated mean nitrate intake from consuming public water supplies (16.1 mg/l) did not differ significantly from that of bottled water (15.2 mg/l). Although the quality of public water supplies needs to be improved by eliminating those that do not comply with the current drinking water limits, at present it does not justify the high consumption of bottled water (at least for nitrate contents).     

Assessment of ground water quality for drinking purpose, District Nainital, Uttarakhand, India

The ground water quality of District Nainital (Uttarakhand, India) has been assessed to see the suitability of ground water for drinking and irrigation applications. This is a two-part series paper and this paper examines the suitability of ground water including spring water for drinking purposes. Forty ground water samples (including 28 spring samples) were collected during pre- and post-monsoon seasons and analyzed for various water quality constituents. The hydrochemical and bacteriological data was analyzed with reference to BIS and WHO standards and their hydrochemical facies were determined. The concentration of total dissolved solids exceeds the desirable limit of 500 mg/L in about 10% of the samples, alkalinity values exceed the desirable limit of 200 mg/L in about 30% of the samples, and total hardness values exceed the desirable limit of 300 mg/L in 15% of the samples. However, no sample crosses the maximum permissible limit for TDS, alkalinity, hardness, calcium, magnesium, chloride, sulfate, nitrate, and fluoride. The concentration of chloride, sulfate, nitrate, and fluoride are well within the desirable limit at all the locations. The bacteriological analysis of the samples does not show any sign of bacterial contamination in hand pump and tube-well water samples. However, in the case of spring water samples, six samples exceed the permissible limit of ten coliforms per 100 ml of sample. It is recommended that water drawn from such sources should be properly disinfected before being used for drinking and other domestic applications. Among the metal ions, the concentration of iron and lead exceeds the permissible limit at one location whereas the concentration of nickel exceeds the permissible limit in 60 and 32.5% of the samples during pre- and post-monsoon seasons, respectively. The grouping of samples according to their hydrochemical facies indicates that majority of the samples fall in Ca–Mg–HCO₃ hydrochemical facies.     

Monitoring bacterial contamination of piped water supply in rural coastal Bangladesh

Safe drinking water is scarce in southwest coastal Bangladesh because of unavailability of fresh water. Given the high salinity of both groundwater and surface water in this area, harvested rainwater and rain-fed pond water became the main sources of drinking water. Both the government and non-government organizations have recently introduced pipe water supply in the rural coastal areas to ensure safe drinking water. We assessed the bacteriological quality of water at different points along the piped water distribution system (i.e., the source, treatment plant, household taps, street hydrants, and household storage containers) of Mongla municipality under Mongla Upazila in Bagerhat district. Water samples were collected at 2-month interval from May 2014 to March 2015. Median E. coli and total coliform counts at source, treatment plant, household taps, street hydrants, and household storage containers were respectively 225, 4, 7, 7, and 15 cfu/100 ml and 42,000, 545, 5000, 6150, and 18,800 cfu/100 ml. Concentrations of both of the indicator bacteria reduced after treatment, although it did not satisfy the WHO drinking water standards. However, re-contamination in distribution systems and household storage containers indicate improper maintenance of distribution system and lack of personal hygiene.     

Ground water quality in the Kathmandu valley of Nepal

A study was undertaken to assess the quality of groundwaters in the Kathmandu Valley, Nepal. The groundwater samples were randomly collected from shallow well, tube well, and deep-tube wells located at different places of Kathmandu, Lalitpur, and Bhaktapur districts in the Kathmandu valley. Physical, chemical, and microbiological parameters of the samples were evaluated to estimate the groundwater quality for drinking water. It was found that the groundwater in the valley is vulnerable to drink due to presence of iron and coliform bacteria. Iron was estimated to be much higher then the acceptable limit of World Health Organization (WHO) drinking-water quality guidelines (1.9 mg/L). Total coliform bacteria enumerated in groundwaters significantly exceeded the drinking-water quality standard and observed maximum coliform (267 CFU/100 mL) in shallow wells. The electrical conductivity and turbidity were found to be 875 ??S/cm and 55 NTU, respectively, which are above the WHO recommendations for drinking water guidelines. However, pH value was measured within the acceptable limit. Arsenic, chloride, fluoride, and hardness concentrations were found to be in agreement with the recommendations of WHO drinking-water quality guidelines.     

Determination of selected steroid hormones in some surface water around animal farms in Cape Town using HPLC-DAD

In this study, a method for the simultaneous determination of two steroid hormones, 17β-estradiol (E2) and estriol (E3), and a hormone mimicking polycarbonate, bisphenol-A (BPA), was developed and validated. This was thereafter used for the determination of the levels of the hormones in surface water collected around some livestock farms. The sensitivity of the method allowed the LODs and LOQs of the hormones and mimic hormone in the range 1.14–2.510 and 3.42–7.53 μg/L, respectively. The results revealed wide variability in the concentrations of E2 and E3, while BPA was not detected at any of the sampling stations. The concentration of E3 ranged between <1.14 and 45.5 μg/L (N = 120) in station 2 water. The highest concentration of E2 (15.7 μg/L, N = 80) was observed in water from station 1. The varied concentrations may be connected with the nature and sources of release, inconsistencies in analyte distribution due to dynamics of water flow pattern and the physical/chemical properties of the receiving water bodies.     

Simultaneous quantitative monitoring of four indicator contaminants of emerging concern (CEC) in different water sources of Central India using SPE/LC-(ESI)MS-MS

Environmental occurrence of CECs poses a great threat to both aquatic life and human health. The aim of this study was to optimize and validate SPE/LC-(ESI)MS-MS method for simultaneous quantitative monitoring of two sub-classes of CECs (pharmaceuticals and hormones) and to estimate the concentrations of select CECs in environmental water samples. For all the tested analytes, recoveries in laboratory reagent water were greater than 81%. Average percent (relative standard deviation) RSD of the analytes in recovery, repeatability, and reproducibility experiments were ≤?10%. Determination coefficients (r²) of primidone, diclofenac, testosterone, and progesterone were estimated to be 0.9979, 0.9972, 0.9968, and 0.9962, respectively. Limits of detection (LOD) for primidone, diclofenac, testosterone, and progesterone were 4.63 ng/L, 5.36 ng/L, 0.55 ng/L, and 0.88 ng/L, respectively. Limits of quantification (LOQ) for primidone, diclofenac, testosterone, and progesterone were 14.72 ng/L, 17.06 ng/L, 1.766 ng/L, and 2.813 ng/L, respectively. Average recoveries in environmental water and wastewater samples were greater than 74% and RSD were ≤?7%. Trace levels (68.33–125.70 ng/L) of primidone were detected in four environmental water samples, whereas diclofenac was not detected in any of the tested sample. Trace levels of progesterone were observed in two environmental samples (16.64 –203.73 ng/L), whereas testosterone was detected in STP inlet sample (178.16 ng/L).     

Feasibility of the hydrogen sulfide test for the assessment of drinking water quality in post-earthquake Haiti

In 2010, a magnitude 7.0 earthquake struck Haiti, severely damaging the drinking and wastewater infrastructure and leaving millions homeless. Compounding this problem, the introduction of Vibrio cholerae resulted in a massive cholera outbreak that infected over 700,000 people and threatened the safety of Haiti’s drinking water. To mitigate this public health crisis, non-government organizations installed thousands of wells to provide communities with safe drinking water. However, despite increased access, Haiti currently lacks the monitoring capacity to assure the microbial safety of any of its water resources. For these reasons, this study was designed to assess the feasibility of using a simple, low-cost method to detect indicators of fecal contamination of drinking water that could be implemented at the community level. Water samples from 358 sources of drinking water in the Léogâne flood basin were screened with a commercially available hydrogen sulfide test and a standard membrane method for the enumeration of thermotolerant coliforms. When compared with the gold standard method, the hydrogen sulfide test had a sensitivity of 65 % and a specificity of 93 %. While the sensitivity of the assay increased at higher fecal coliform concentrations, it never exceeded 88 %, even with fecal coliform concentrations greater than 100 colony-forming units per 100 ml. While its simplicity makes the hydrogen sulfide test attractive for assessing water quality in low-resource settings, the low sensitivity raises concerns about its use as the sole indicator of the presence or absence of fecal coliforms in individual or community water sources.