Measurements of C6-C8 hydrocarbons at a UK rural site during January 1999. Site evaluation and correlations between species

Ambient concentrations of C6-C8 aromatic hydrocarbons and n-heptane, determined by gas chromatography with flame ionisation detection, are presented from a winter campaign during January 1999 at a rural site near Leeds. Absolute concentrations are significantly lower than those obtained from the only designated UK rural site (Harwell) in the automated UK hydrocarbon network. Both absolute and relative concentrations of hydrocarbons measured at the site have been interpreted in terms of the arriving back-trajectories. The site is subject to two main airflows during the winter months; relatively polluted air from the southwest and much cleaner air from the northwest. Ratios of hydrocarbon concentrations show evidence of significant chemical processing consistent with chemical removal by OH. Uncertainties in the ages of the trajectories prevent a reliable estimation of the average OH concentration over the trajectory. The dependence of the variance of the hydrocarbon concentrations with their lifetime with respect to removal by OH does not show the expected behaviour.     

Public perceptions of air quality and quality of life in urban and suburban areas of London

A comparative study was undertaken at two different sites (one urban, one suburban) in Greater London in order to examine whether there was a relationship between publicly available air quality data and the public's perception of air quality. Perceptions of air quality and its role as a potential quality of life indicator was also investigated. A total of 200 people were interviewed in Wood Green and Wimbledon in 1999 and air quality data were obtained simultaneously from the nearest appropriate monitoring station. The study has enabled a comparison between the public's perception of air quality and the actual monitored concentration values. The survey results reveal how seriously the public regards air pollution from road traffic in terms of their quality of life and identifies the attitudes of the public to nuisance from road traffic. The results reveal that the public's perception of air quality is not a reliable indicator of the actual levels of air pollution in their area. The results also revealed that air pollution issues generated as a result of road traffic are of high importance in terms of people's quality of life when compared to other aspects of their quality of life. The study revealed that residents in the urban area (Wood Green) were more disturbed by road traffic than residents in the suburban area (Wimbledon). Out of all the disturbances listed, it was found that residents were more disturbed by vehicle-derived fumes, dust and dirt than other aspects of road traffic related nuisance. The TELETEXT/CEEFAX service on air quality was little used by the public as a means of obtaining information on air pollution.     

On-site Comparison of Canister and Solid-Sorbent Trap Collection of Highly Volatile Hydrocarbons in Ambient Atmospheres

A field experiment for the comparison of the efficiency of canisters and adsorption multibed tubes for sampling atmospheric highly volatile hydrocarbons at ppbv levels is described. The canister was passivated by the Summa process and the adsorption tubes were filled with Carbotrap C, Carbotrap B and Carbosieve S-III. The sampling with the adsorption tubes was performed at ambient temperature and at -10°C. The highest concentrations were generally obtained with canisters but these results are very similar to those obtained with refrigerated multibed adsorption tubes. Both methods appear to be equivalent for most of the highly volatile hydrocarbons encountered in moderately polluted urban areas. In contrast, sampling with ambient temperature tubes provides lower concentrations. This study has also shown that K2CO3 drying efficiently removes humidity from air samples allowing the obtention of reliable concentration data on highly volatile hydrocarbons at ppbv levels. These drying tubes can easily be re-conditioned and tested for blanks and memory effects, which greatly facilitates the control of external contamination and sample cross-contamination.     

便携式催化氧化-FID法测定固定污染源废气中非甲烷总烃

对便携式催化氧化-FID法测定非甲烷总烃的检出限、精密度、准确度、催化效率等性能指标开展研究,考察该方法测定固定污染源废气中非甲烷总烃的适用性。结果表明：催化氧化装置的转化效率为98.1%～99.7%,方法检出限为0.05 mg/m3（以碳计）;2个质量浓度水平的甲烷和丙烷混合标准气体测定结果的相对误差分别为-6.4%～6.1%、-4.7%～-0.5%,实验室内、实验室间测定结果的RSD分别为2.9%～5.9%和1.6%～2.5%、1.5%和0.6%。用该方法和国标法同时测定实际样品,两种方法测定结果的相对误差为6.4%～21.4%。     

The distribution of polynuclear aromatic hydrocarbons in ambient air particulates in Singapore

Ambient air particulates were collected using high volume samplers at seven locations throughout Singapore. The particulates were analyzed for eleven polynuclear aromatic hydrocarbons (PAH) using high performance liquid chromatography (HPLC) with fluorescence detection. Several sample preparation techniques were used to determine which method would yield the most PAHs from the bulk sample matrix. PAH profiles (standardised against the concentration of benzo(a)pyrene) were obtained to characterise the different sampling sites chosen.     

Characteristics and sources of non-methane hydrocarbons and halocarbons in wintertime urban atmosphere of Shanghai, China

The characteristics and sources of major hydrocarbons and halocarbons in the wintertime ambient air of urban center of Shanghai, a mega city of China, were investigated. Propane, toluene, ethyl acetate, and benzene were the most abundant hydrocarbons. The majority of species showed significant variability in mixing ratios with occasional episodic increases. The more common use of liquefied petroleum gas fuel for taxis and light motorcycles was believed to lead to high levels of ambient propane over the urban center of Shanghai. Correlating with toluene, dichloromethane, and 1,2-dichloroethane (1,2-DCE), abundant chloromethane (up to a daily mean of 1.61?±?0.99 ppbv and a maximum of 5.34 ppbv) was mainly associated with industrial emissions, although biomass burnings exist widely in east China. The Chinese New Year (CNY) holiday period with no industrial activity over China provides a platform for the study of industrial emissions over the urban atmosphere of Shanghai. The normal weekly cycles were characterized by higher and more variable mixing ratios during weekdays which dropped during weekends. Enhanced mixing ratios were observed in the fortnight before the CNY holidays due to increased industrial emissions as a result of overtime production to make up for the holiday losses. During the CNY holidays, lower level and less variable mixing ratios were observed. A benzene/toluene (B/T) ratio of 0.6?±?0.4 (mean?±?std.) for the morning rush hour samples was identified to be the characteristic ratio of vehicular emissions. However, a B/T ratio of 0.4?±?0.2 from vehicles and other sources was derived for the ambient air.     

Determination of gaseous polycyclic aromatic hydrocarbons by a simple direct method using thermal desorption–gas chromatography–mass spectrometry

In the last decade, the development of novel analytical methodologies enabled the identification of several environmental pollutants responsible for health problems associated with indoor exposure. Polycyclic aromatic hydrocarbons (PAHs) are among the potential hazardous chemicals present in ambient air. Due to their bioaccumulation potential and carcinogenic/mutagenic effects, 16 PAHs are currently listed as priority air pollutants. The main goal of this work was to implement a new and simple method for sampling and determination of PAHs in air by using a thermal desorption (TD) technique followed by gas chromatography coupled with mass spectrometry analysis. A detailed study was carried out to optimise the experimental method in each of its phases, including (active) sampling, TD and chromatographic analysis. The results demonstrate that this approach allowed the detection and quantification of the six more volatile PAHs, namely, naphthalene, acenaphthylene, acenaphthene, fluorene, phenanthrene, and anthracene. Acceptable precision and good linearity over the explored range were obtained. No carry-over was observed during experimental tests and the method provided a reproducible answer. The applicability of the novel methodology was tested in real environment, namely, on the roof of a building in an urban area, in a domestic kitchen and in a collective car garage. The method enabled the identification of two PAHs in the field samples, specifically, naphthalene (two rings) and phenanthrene (three rings). With regard to PAHs sample composition, the most abundant PAH found, in the three different locations, was naphthalene, accounting for about 84–100 % of the total PAH mass detected.     

吹扫捕集气相色谱质谱法测定土壤中挥发性有机物

建立了吹扫捕集气相色谱质谱法同时测定土壤中卤代烃类、苯系物类、氯代苯类等二十多种挥发性有机物.使用模拟土壤和实际土壤样品优化了吹扫时间、吹扫温度等参数;采用内标法绘制了校正曲线,各目标化合物5个浓度水平的响应因子的相对标准偏差均小于20%,相关系数均大于0.999;测定了方法检出限,采用2g土壤,各目标化合物方法检出限界于0.02～1.00μg/kg;对两种总有机碳含量的实际土壤样品进行了加标回收实验,回收率范围64%～123%.     

Microwave-Assisted Solvent Extraction of Air Particulates for the Determination of PAHs

A method for the determination of polycyclic aromatic hydrocarbons (PAHs) in air particulates using microwave-assisted solvent extraction (MASE) coupled to a microwave extraction system (MES) is proposed. During the period of August to October, 1994, Singapore was enveloped by haze caused by forest fires in Sumatra, Indonesia. Air sampling were carried out during September and October; the determination of ambient air PAH levels in Singapore was undertaken. PAH analysis by GC-MS provided excellent sensitivity, linearity of quantitation, peak identification. This technique was evaluated using certified reference materials (CRMs) HS-4 and HS-6. Good recoveries of PAHs (>73.3%) were obtained for both CRMs. The MASE technique using MES is suitable for the determination of PAH levels in ambient air with no clean-up step required.     

自动进样及气体分流技术测定气体中非甲烷总烃

采用自动进样和气体分流技术,双柱双FID检测器气相色谱法测定气体中的非甲烷总烃,实现了非甲烷总烃的连续自动分析,同时一次进样即可得到甲烷和总烃的数据。方法的检出限为0.05 mg/m3,测定的相对标准偏差在0.7%~1.8%内,非甲烷总烃的加标回收率为96.0%~98.5%。与传统手动进样法相比,本方法具有重复性好、操...     

Emission inventory of evaporative emissions of VOCs in four metro cities in India

High concentrations of volatile organic compounds (VOCs) in ambient air of urban areas stress the need for the control of VOC emissions due to the toxic and carcinogenic nature of many VOCs commonly encountered in urban air. Emission inventories are an essential tool in the management of local air quality, which provide a listing of sources of air pollutant emissions within a specific area over a specified period of time. This study intended to provide a level IV emission inventory as par the United States Environmental Protection Agency (USEPA) definition for evaporative VOC emissions in the metro cities of India namely Delhi, Mumbai, Chennai, and Kolkata. The vehicular evaporative emissions are found to be the largest contributor to the total evaporative emissions of hydrocarbons followed by evaporative losses related to petrol loading and unloading activities. Besides vehicle-related activities, other major sources contributing to evaporative emissions of hydrocarbons are surface coating, dry cleaning, graphical art applications, printing (newspaper and computer), and the use of consumer products. Various specific preventive measures are also recommended for reducing the emissions.     

Speciation and sources of atmospheric aerosols in a highly industrialised emerging mega-city in central China

Monitoring air quality in large urban agglomerations is the key to the prevention of air pollution-related problems in emerging mega-cities. The city of Wuhan is a highly industrialised city with >9 million inhabitants in Central China. Simultaneous PM10 sampling was performed during 1 year at one urban and one industrial site. Mean PM10 daily levels (156 microg m(-3) at the urban site and 197 microg m(-3) at the industrial hotspot) exceed the US-EPA or EU annual limit values by 3-4 times. A detailed study of daily speciation showed that the mean chemical composition of PM10 presents minimal differences between peak and low PM episodes. This implies that PM10 aerosols in the study area result from local emissions, and air quality management and abatement strategies in Wuhan should thus focus on local anthropogenic sources. The levels of some elements of environmental concern are relatively high (409-615 ngPb m(-3), 66-70 ngAs m(-3), 116-227 ngMn m(-3), 10-12 ngCd m(-3)) due to industrial, but also urban emissions. Principal component analysis identified a mineral source (probably cement and steel manufacture) and smelting as the main contributors to PM10 levels at the industrial site (34%), followed by a coal fired power plant (20%) and the anthropogenic regional background (16%). At the urban site the major PM10 source is a mixed coal combustion source (31%), followed by the anthropogenic regional background (28%) and traffic (16%).     

Polycyclic aromatic hydrocarbons (PAHs) in atmospheric urban area: monitoring on various types of sites

The air quality over the Toulouse urban area (France) is recorded daily by the regional "Midi-Pyrénées" atmospheric pollution measurements network (ORAMIP). Relevant data is collected from about 100 analysers spread over more than thirty stations. The regulations covering major indicators of atmospheric pollution (ozone, nitrogen dioxide, sulphur dioxide) have been updated in recent years to include additional compounds like polycyclic aromatic hydrocarbons (PAHs). The ORAMIP, in partnership with the ENSIACET has undertaken background PAH average concentration measurements over the urban agglomeration of Toulouse during spring 2006 for various types of sites (traffic, urban, industrial). The sampling was performed using a low volume air sampler equipped with quartz fiber filters and polyurethane foams For the two urban sites, total atmospheric concentrations between 12 and 20 ng/m(3) have been obtained, whereas for the industrial site the values averaged 22 ng/m(3). In addition, and regardless of site, the average concentrations of benzo[a]pyrene, at present the only regulated PAH, were always less than the 1 ng/m(3) limit.     

Characterization of PM10-bound polycyclic aromatic hydrocarbons in the ambient air of Spanish urban and rural areas

Urban areas constitute major pollution sources due to anthropogenic activities located in these areas. Among the legislated air pollutants, the particulate matter with an aerodynamic diameter less than or equal to 10 microns (PM10) and polycyclic aromatic hydrocarbons (PAH) are controlled under Directive 2008/50/EC and Directive 2004/107/EC, respectively due to their adverse health effects. A study was carried out at four urban and rural Spanish areas during the warm and cold seasons in 2008-2009 to quantify 19 PAH associated with the atmospheric PM10 by gas chromatography-mass spectrometry-mass spectrometry detection (GC-MS-MS) with the internal standard method. The particle-bound composition of the analysed PAH was 5 and 10 times greater in industrial and urban areas, respectively when compared to those measured in rural areas. The highest PAH concentrations during the cold period were possibly due to the additional contribution of domestic heating sources and meteorological conditions such as low temperature and solar irradiation. The use of molecular diagnostic ratios indicated that the possible, major PAH pollution sources in the most polluted areas were pyrogenic sources, mainly attributed to petroleum combustion sources (motor vehicle emissions and crude oil combustion). Petrogenic sources related to evaporative emissions also seemed to contribute in the most polluted area during the warm period. Those dates with high carcinogenic character according to the benzo(a)pyrene equivalent (BaP-eq) were also possibly attributed to petroleum combustion sources.     

Rapid,ultra-sensitive detection of gas phase elemental mercury under atmospheric conditions using sequential two-photon laser induced fluorescence

We have examined the sensitivity of sequential two photon laser induced fluorescence (LIF) detection of elemental mercury, Hg(0) in the gas phase. The most sensitive approach involves an initial laser excitation of the 6(3)P1-6(1)S0 transition at 253.7 nm, followed by excitation with a second laser to the 7(1)S0 level. Blue shifted fluorescence is observed on the 6(1)P1-6(1)S0 transition at 184.9 nm. The excitation scheme, involving sequential excitation of two atomic transitions, followed by detection of the emission from a third is extremely specific and precludes detection of anything other than atomic mercury. Using our 10 Hz laser system we have achieved a detection sensitivity of 0.1 ng m(-3) at a sampling rate of 0.1 Hz, i.e. averaging 100 laser shots at a pressure of one atmosphere in air. At low concentrations we sampled simultaneously with an automated mercury analyzer (Tekran 2537A), to ensure accuracy. We have examined the linearity of the technique, generating flows containing mercury concentrations between 1 and 10,000 ng m(-3) using a permeation tube and dynamic dilution, but relying on the concentrations given by the Tekran at low levels and the concentration calculated from dilution at high levels. We find that the detection is linear over the five orders of magnitude that we were able to vary the concentration. Our measured detection limits in He and Ar are much lower as these gases are inefficient fluorescence quenchers.     

A positive chemical ionization GC/MS method for the determination of airborne ethylene glycol and propylene glycols in non-occupational environments

An analytical method for ethylene glycol and propylene glycols has been developed for measuring airborne levels of these chemicals in non-occupational environments such as residences and office buildings. The analytes were collected on charcoal tubes, solvent extracted, and analyzed by gas chromatography-mass spectrometry using a positive chemical ionization technique. The method had a method detection limit of 0.07 microg m(-3) for ethylene glycol and 0.03 microg m(-3) for 1,2- and 1,3-propylene glycols, respectively, based on a 1.44 m3 sampling volume. Indoor air samples of several residential homes and other indoor environments have been analyzed. The median concentrations of ethylene glycol and 1,2-propylene glycol in nine residential indoor air samples were 53 microg m(-3) and 13 microg m(-3) respectively with maximum values of 223 microg m(-3) and 25 microg m(-3) detected for ethylene glycol and 1,2-propylene glycol respectively. The concentrations of these two chemicals in one office and two laboratories were at low microg m(-3) levels. The maximum concentration of 1,3-propylene glycol detected in indoor air was 0.1 microg m(-3).     

Determination of 14 amines in air samples using midget impingers sampling followed by analysis with ion chromatography in tandem with mass spectrometry

An Ion Chromatography-Mass Spectrometry (IC-MS) method was developed for the simultaneous quantification of 14 volatile amines in air. The method includes collection of compounds into two midget impingers in a row filled with 15 ml of ultrapure water. The analytical performances with mass spectrometry detection were compared to those obtained with classical conductivity detection. The use of mass spectrometry detection (in SIM mode) overcomes most of the coelutions encountered with conductivity detection. Although the linearity domain of calibrations is reduced for the MS detection as compared with the CD detection, the detection limits in MS detection are highly lowered allowing the quantification of amines at the levels of μg m(-3) in air with a good accuracy for most compounds (RSD of less than 10%). This method was successfully applied to the analysis of amines released from polyurethane foams. Seven amines were identified and some in high concentrations, like dimethylaminoethanol, NIAX and TEDA.     

A two-column method for long-term monitoring of non-methane hydrocarbons (NMHCs) and oxygenated volatile organic compounds (o-VOCs)

A method has been developed for concurrent analysis of C2-C7 hydrocarbons and C2-C5 oxygenated volatile organic compounds (o-VOCs) including alcohols, aldehydes, ketones and ethers. A multi-bed, Peltier-cooled adsorbent trap, consisting of Carboxen 1000 and Carbopack B, was used to acquire one sample per hour. Upon injection the sample was split in an approximately 50:50 ratio between a 50 m aluminium oxide (Al2O3) porous layer open tubular (PLOT) column and a 10 m LOWOX column. Eluents from each column were then analysed using flame ionisation detection (FID). Regular calibration of the system was performed using a standard cylinder mixture at the parts per billion by volume (ppbV) level for non-methane hydrocarbons (NMHCs) and a permeation tube method for the oxygenated species. The system is fully automated with NMHC detection limits between 1 and 10 parts per trillion by volume (pptV) and o-VOC detection limits between 10 and 40 pptV.     

Capillary microextraction for simultaneous analysis of multi-residual semivolatile organic compounds in water

Capillary microextractor (CME) in combination with a gas chromatograph-mass spectrometer (GC-MS) was employed for the determination of trace priority hazardous substances in water. Three groups of semivolatile organic compounds (SVOCs), i.e., chlorinated hydrocarbons, pesticides and polycyclic aromatic hydrocarbons (PAHs), were simultaneously determined. SVOCs were extracted from 7 mL of water samples on a 100 cm commercial gas chromatographic column (0.32 mm id x film thickness 0.25 microm, HP-5 capillary column) and eluted with only 3 microL of acetonitrile. The extractant was analyzed by GC-MS in the selected ion monitoring mode. The method showed good linearity over the concentration range 10 ng L(-1) to 3.0 mg L(-1) with correlation coefficients (r) greater than 0.99 and low limits of detection ranged from 10 ng L(-1) to 1.0 mg L(-1). High recovery (more than 80%) was obtained with relative standard deviation less than 10%. The method was successfully applied for trace level analyses of SVOCs in water samples.