Application of remote sensing to exposure monitoring

Although exposure assessments cannot be completed remotely, remote sensing techniques provide an invaluable adjunct in exposure monitoring programs. Exposure can be defined as the summation over time, in all media, of the amount of a pollutant available at the exchange boundaries of the receptor during a specified period. This paper describes a few remote monitoring techniques that provide direct measurement input into an exposure assessment and several that furnish quantitative or qualitative information leading to decisions regarding how to monitor, such that the source-exposure-dose relationships can be fully defined. Two general classes of remote sensing systems are included in this discussion-passive and active. Passive systems depend on a measurement of the energy reflected or emitted by a target and active systems use an energy source, e.g., a laser to perform the environmental interrogation. Airborne as well as ground-based remote monitoring measurements or systems are also considered in this paper.     

A Metamodeling Approach for Integrated Assessment of Air Quality Policies

A method is proposed to build integrated models (also called Metamodels) aimed at quantifying the economic efficiency of air quality policies. This Metamodeling approach is based on the coupling of two complementary models, that operate at different scales in space and time, and which represent the economic and the physical and chemical processes, respectively. The joint consideration of the physico-chemical and techno-economic structure of the pollution control problems permits a comprehensive evaluation of air pollution abatement strategies. The motivating pollution control problems include urban-regional air quality management through efficient energy and traffic control policies. A pilot study, exploiting data collected in the Geneva canton (Switzerland), is used to demonstrate the potential of the approach.     

Application of CFD Methods for Modelling in Air Pollution Problems: Possibilities and Gaps

Different urban air pollution problems deal with complex structure of air flows and turbulence. For such problems the Computer Fluid Dynamics (CFD) methods become widely used. However, this approach despite a number of advantages has some problems. Experience of use of CFD tools for development of models and suggestions of their applications for a local scale air pollution over a complex terrain and stable stratification are discussed in this paper, including: Topography and complex geometry: choose of the co-ordinate system and computer grid; Turbulence closure for air pollution modelling: modified k- model for stable stratified ABL; Boundary conditions for vertical profiles of velocity for stable-stratified atmosphere; Effects of the radiation and thermal budget of inclined surfaces to dispersion of pollutants; Artificial sources of air dynamics and circulation.Some examples of CFD applications for air pollution modelling for a flat terrain, mountainous area, mining open cast and indoor ventilation are discussed. Modified k- model for stably-stratified ABL is suggested. Due to the isotropic character of the k- model a combination of it in vertical with the sub-grid turbulence closure in horizontal can be more suitable for ABL. An effective scheme of boundary conditions for velocity profiles, based on the developed similarity theory for stable-stratified ABL, is suggested. Alongside with the common studies of atmospheric dispersion, the CFD methods have also demonstrated a good potential for studying anthropogenic and artificial-ventilation sources of air dynamic and circulation in local-scale processes of air pollution.     

Monitoring of the functioning of ecosystems

The theoretical basis, the content and the possible applications of the program Monitoring of ecosystems are considered. A functional definition of ecosystem is proposed, and some features of ecosystems are defined on this basis. The program Monitoring of ecosystems is visualized as a large-scale program of simple measurements of the rates of the main ecosystem processes. The expected results can be utilized in two ways: (1) a comparative knowledge of ecosystem functioning provides the fundamentals of geography of ecosystems, and (2) the constant, repeatable evaluation of a given ecosystem function provides a basis for its rational management.     

Field Study of Wind and Traffic to Test a Street Canyon Pollution Model

In the U.K., local authorities have new duties to review and assess air quality. Dispersion models are important tools in this process. The performance of a street canyon model, AEOLIUS, in calculating carbon monoxide (CO) concentrations in urban areas is discussed. A field experiment was conducted in a busy street canyon in Leek, Staffordshire. Wind speed and direction were measured at three heights adjacent to the street. The canyon's CO concentrations and traffic counts were recorded. Predicted concentrations of CO, calculated using AEOLIUS, were compared with the observed values. The concept of a roof-top wind is discussed, as are the consequences of using wind measurements from outside the town. Choice of wind measurement location and height of the anemometer above the canyon had a pronounced effect on calculating the roof-top wind. Two methods of deriving a street level wind speed from a roof-top wind speed gave results that differ by up to a factor of two. AEOLIUS had variable skill at predicting CO concentrations depending on the roof-top wind direction: possible reasons for this variability are explored. A sensitivity study of the model showed that vehicle emissions have the greatest impact on predicted concentrations. Implications for local air quality management are discussed.     

Ozone biomonitoring in Northern Italy

This report presents the results of an ozone monitoring experience performed with tobacco indicator plants (Nicotiana tabacum L. cv. Bel-W3). These bioindicators were exposed to ambient air in 23 sites in Northern Italy from 27 April 1987 to 21 October 1987. Typical ozone-induced leaf necrosis was observed in every site. The percentage increase in injured leaf area was estimated weekly and a Leaf Injury Index (LII) was calculated. The weekly series of LIIs were statistically inspected for spatial and temporal relationships. Sample correlation coefficients were statistically significant for almost every possible pair of sites. The time series properties of ten series of LIIs with no missing data were analyzed using Box-Jenkins models. An autoregressive first order model, or AR(1), was selected to remove the autocorrelation from these series. Linear correlation coefficients between prewhitened (i.e. from which autocorrelation had been removed) pairs of LII series were statistically significant. Hence synchronous variations in leaf necrosis could only be related to the regional diffusion of tropospheric ozone.Work carried out as part of the research programme: ENEL's contribution to the knowledge of important environmental issues, Research line; Effects of atmospheric pollution on the land.     

Correlation between environmental parameters and leaf injury in Nicotiana tabacum L. cv. ‘Bel-W 3’

Tobacco plants (Nicotiana tabacum L. cv. Bel-W3) were exposed to ambient air for 25 weeks during the 1987 growing season next to an air pollution monitoring station in Brera (Milan, Italy). The research objective was to study the influence of selected environmental parameters on leaf damage in this plant, which is widely used as an ozone indicator. A multiple linear correlation model was estimated between leaf damage and available meteorological and air pollution data. Leaf injury was positively correlated with ozone integrated exposure and temperature, but negatively with vapour pressure deficit. A linear correlation model was used to estimate ozone integrated exposure from the leaf injury indexWork carried out as part of the research programme: ENEL's contribution to the knowledge of important environmental issues, research line: Effects of atmospheric pollution on the land.     

Persistent organochlorine residues in fish and water birds from the Biobio river,Chile

Concentrations of polychlorinated biphenyls (PCBs), DDT and its metabolites, HCH isomers and hexachlorobenzene (HCB) were determined in fish and birds from different locations in the Biobio river basin (central Chile). Samples collected near the mouth of the river contained high concentrations of PCBs, reflecting the massive use of these xenobiotics in the urban and industrial areas of Concepcion and Talcauano. Samples collected in the central part of the basin contained very high concentrations of lindane that coincide with the widespread use of lindane-based pesticides (purified -HCH) in this area. DDT was distributed homogeneously throughout the basin, except at Laguna Icalma, the source of the river in the Andes. Most PCB residues in fish and birds consisted of congeners between penta- and hepta-chlorobiphenyls. In fish, the predominant congeners were the pentachlorobiphenyl 23445 (IUPAC number 118) and the hexachlorobiphenyl 2234455 (PCB-153); in birds 224455 (PCB-180) prevailed.     

Background Levels of Metals in Soils, McMurdo Station, Antarctica

McMurdo Station is the largest research station in Antarctica, with a population that ranges each year from 250 to 1200 people. Because of its size and 40-year history of use, a number of locations around the station have become contaminated with wastes. Soils and sediments in these areas have been shown to contain elevated levels of petroleum-related products, PCBs, other organics, and metals. While some remedial investigations have been conducted, background levels of metals in soils have not been determined. This paper reports on background levels of metals in a natural basalt-derived soil (gray soil) and scoria (soft porous rock used as fill, red soil) near McMurdo Station using two fundamentally different analytical procedures, concentrated acid extraction/analysis and total metals. These data facilitate determining the extent and levels of metal contamination near McMurdo Station and provide reference levels of metals for comparison with existing and future remediation data. There were statistically significant differences between metals concentrations in both gray and red soils, and no correlations between the level of extracted versus total metal. Generally, only a small fraction of a metal was extractable.     

Routine Measurement of Dissolved Inorganic 15N in Precipitation and Streamwater

The difficulty of measuring 15N in dilute solutions has limited the potential of ecosystem labeling experiments and model comparisons. By concentrating the N from large (up to 20 L) water samples on ion-exchange resin columns, we obtained enough N for accurate and reproducible 15N measurement using the Teflon tape diffusion method. Analysis of standards demonstrated >95% recovery of inorganic N from samples, and 15N values comparable to those obtained using standard distillation methods. The value of the blank at our laboratory was 0.16 moles N. Analytical precision was within 2 15N when samples of streamwater from the Bear Brook Watersheds (1800 eq · ha-1 · yr-1 N addition at 192 15N) were kept frozen until analysis. The analytical process is lengthy, but once set up can easily be performed for large numbers of samples.     

Air pollution and diseases of the respiratory tracts in pre-school children: A transfer function model

The purpose of the present statistical analysis was the assessment of the relation between time series of environmental factors and of frequencies of diseases of the respiratory system in pre-school children. During about one year, daily measurements of air pollutants and climatic variables were taken. During the same period of time two series of medical data were collected: (i) The daily relative number of pre-school children, exhibiting diseases of the respiratory tracts who either came to the outpatients' clinic of the children's hospital or were reported by paediatricians in Basle (ENTRIES). (ii) The daily relative frequency of symptoms of the respiratory tracts observed in a group of randomly selected pre-school children (SYMPTOMS).By means of transfer function models the relation between the two target variables and the explaining variables was analysed. Several practical problems did arise: Choice of the appropriate transformation of the different series, interpretation of the crosscorrelation function using different methods of prewhitening, time splitting and nonstationarity of the crosscorrelation structure. In particular, it was found that after prewhitening the crosscorrelation function between the explanatory series SO₂ and the response series SYMPTOMS changes with time. While during the winter period an instantaneous relation between these two series (and to a lesser extent between NO₂ and SYMPTOMS) was identified, no such relation was found for the other seasons.     

Insecticide Contamination of Jamaican Environment. V. Island-Wide Rapid Survey of Residues in Surface and Ground Water

Residues of organochlorines and organophosphates were determined by gas chromatography in water and sediment from 26 locations in 17 major rivers, 7 natural springs and 13 wells across Jamaica. Samples were collected on only one occasion between May and July, 1994. Residues of endosulfan were detected in all but three rivers; -endosulfan in 15 samples of sediment (0.9–108.1, mean = 28.93, S.E. = 7.198 g kg-1) and 13 of water (0.01–0.35, mean = 0.11, S.E. = 0.035 g L-1), -endosulfan in 5 sediment (15.29–49.35, mean = 30.56, S.E. = 7.132 g kg-1) and 12 water (0.05–0.31, mean = 0.14, S.E. = 0.031 g L-1) samples, and endosulfan sulphate in waters of three rivers (0.003–0.244 g L-1). Chlorpyrifos was present in 9 sediment (0.423-135.2, mean = 18.38, S.E. = 10.699 g kg-1) and two water (0.001–0.022 g L-1) samples, diazinon and ethoprophos in the sediment of one river each. Mean levels (g L-1) of and isomers and sulphate of endosulfan were 0.16 (S.E. = 0.057), 0.12 (S.E. = 0.036) and 0.15 (S.E. = 0.089), respectively, in four of the seven springs and 0.23 (S.E. = 0.052), 0.11 (S.E. = 0.029) and 0.26 (S.E. = 0.088), respectively, in seven of the thirteen wells monitored.     

Monitoring the condition of the Canadian forest environment: The relevance of the concept of ‘ecological indicators’

The Canadian forest environment is characterized by high spatial and temporal variability, especially in the west. Our forests vary according to climate, landform, and surficial geology, and according to the type, intensity, extent of, and the time since the last disturbance. Most Canadian forests have had a history of repeated acute, episodic disturbance from fire, insects, wind, diseases and/or logging, with a frequency of disturbance varying from a few decades to many centuries. These sources of variability have resulted in a complex and continually changing mosaic of forest conditions and stages of successional development.Monitoring the quality of this dynamic forested landscape mosaic is extremely difficult, and in most cases the concept of a relatively simple index of forest ecosystem quality or condition (i.e. an ecological indicator) is probably inappropriate. Such ecological indicators are better suited for monitoring chronic anthropogenically induced disturbances that are continuous in their effect (e.g. acid rain, heavy metal pollution, air pollution, and the greenhouse effect) in ecosystems that, in the absence of such chronic disturbance, exhibit very slow directional change (e.g. lakes, higher order streams and rivers). Monitoring the effects of a chronic anthropogenic disturbance to forest ecosystems to determine if it is resulting in a sustained, directional alteration of environmental quality will require a definition of the expected pattern of episodic disturbance and recovery therefrom (i.e. patterns of secondary succession in the absence of the chronic disturbance). Only when we have such a temporal fingerprint of forest ecosystem condition for normal patterns of disturbance and recovery can we determine if the ecosystem condition is being degraded by chronic human-induced alteration of the environment. Thus, degradation is assessed in terms of deviations from the expected temporal pattern of conditions rather than in terms of an instantaneous assessment of any particular condition. The concept of ecological rotation (the time for a given ecosystem to recover from a given disturbance back to some defined successional condition) is useful in the definition of these temporal fingerprints. This requires information on the intensity of disturbance, the frequency of disturbance, and the rate of successional recovery. Only when all three of these are known or estimated can statements be made as to whether the ecosystem is in a longterm sustainable condition or not.The somewhat overwhelming complexity of this task has led forest ecologists to use ecosystem-level computer simulation models. Appropriately structured and calibrated models of this type can provide predictions of the overall temporal patterns of ecosystem structure and functions that can be expected to accompany a given frequency and character of episodic disturbance. Such models can also be used to examine the long-term consequences of chronic disturbances such as acid rain and climatic change. Predictive ecosystem-level models should be used in conjunction with some method of stratifying the inherent spatial biophysical variability of the forest environment, such as the biogeoclimatic classification system of British Columbia.     

Lichen biomonitoring networks in alberta

Lichen biomonitoring of air pollution has developed over a period of about 150 yr. Several valuable techniques now exist which could complement physical/chemical air quality monitoring programmes. The affects of air pollution and acid rain, in areas such as Alberta, where lichens and bryophytes make up a significant portion of the forest vegetation, must be considered important. In addition, bioaccumulation studies can be used to map the areas of heavy metal deposition, estimate actual depositional rates, and check the accuracy of pollutant dispersion models. Lichen biomonitoring techniques must now be calibrated with more glamorous effects on plant physiology, ecosystem processes, cancer incidence, etc.Paper presented at a Symposium held on 20–21 April 1982, in Edmonton, Alberta, Canada.     

Soil-Water Partitioning and Desorption Hysteresis of Volatile Organic Compounds from a Louisiana Superfund Site Soil

The adsorption and desorption of three volatile organic compounds (1,2- dichloroethane, 1,1,2- trichloroethane and 1,1,2,2-tetrachloroethane) from a previously uncontaminated clayey soil sample from a Superfund site in North Baton Rouge,Louisiana was studied. In the linear range of the adsorption isotherm, the partition constants were not affected by the presence of the co-solutes. The adsorption isotherms over a wide concentration range on the soil followed the nonlinearFreundlich isotherm. The desorption of the compounds showedsignificant hysteresis at all concentrations studied. Approximately 20 to 70% of the adsorbed mass of organic compounds resisted the desorption even after five months ofsuccessive desorption steps. The desorption of four compounds(1,2-dichloroethane, 1,1,2-trichloroethane, 1,4-dichlorobenzeneand hexachlorobutadiene) from a contaminated soil sample fromthe same site was also studied. The aqueous concentration declined as the successive desorption steps progressed. For hexachlorobutediene the desorption can be visualized as occurring in two stages. The first stage involved a loosely bound or reversible fraction and the second stage involveda tightly bound or resistant fraction.     

The effect of temperature and salinity on copper body-burden and copper toxicity to Hediste (Nereis) diversicolor

Temperature from 12 to 22°C and salinity from 30.5 to 7.6 increased accumulation of copper in Hediste diversicolor. Copper accumulated ranged from 85.83 to 217.14 g g^-1. Sediments reduced accumulation of copper under temperature-salinity combinations. Accumulated copper ranged from 90.19 to 153.26 g g^-1.However, mortality of the worms was not solely dependent upon copper body-burden. It ranged from 34 to 45% and from 38 to 80% in the presence of sediment. A combination of osmoregulatory and thermal stresses increased the toxic effect of copper to the worms.     

Establishing a standard Sonoran Reference Plant and its application in monitoring industrial and urban pollution throughout the Sonoran Desert

Using analyses from honey mesquite (Prosopis glandulosa) leaves from nearly pristine locations in Arizona, an inorganic plant concentration standard is proposed for use as a Sonoran Reference Plant (SRP). Such a standard can be used as a monitoring device for different anthropogenic pollution sources throughout the Sonoran Desert. To test the application of the SRP, honey mesquite leaves were collected at different sites in southern Arizona and their chemical fingerprints compared to SRP. Sources of element origin were identified through factor analysis and correlation matrices. A terrestrial factor was found in leaves from all sites. Anthropogenic factors varied for different sites. Mesquite leaves accumulated significant amounts of elements originating from copper smelters (As, Sb) and urban pollution (La, Sm, Ce, V). These pollutants are small-sized and have been linked to human lung diseases. Mesquite is a deciduous tree; the yearly comparison of mesquite leaf element concentration spectra to the SRP standard can be used to determine seasonal improvement or deterioration of environmental quality in a particular area.     

Organochlorinated Compounds in Waters of the Pearl River Delta Region

Samples of river water and sewage water were analysed for ten PCB congeners, chlorobenzenes and chlorinated pesticides (BHCs and DDT) in three cities (Guangzhou, Shenzhen and Zhaoqing) in the Pearl River Delta, The results showed that the sewage water in Shengzhen had the highest concentration of total PCBs at about 10ng/L, and Dasha River (Shengzhen), the lowest at about 1.0ng/L. In general, the sewage waters in the three cities had higher concentrations of PCBs than river waters. Chlorobenzenes were investigated in the water samples. The total concentrations of chlorobenzenes ranged from 0.02~0.13g/L, the Dasha River had the highest level of chlorobenzenes, and the sewage water in the city of Zhaoqing had the next highest. The result may be related to the discharges from paper production factories nearby the sampling sections of the Dasha River (Shenzhen) and sewage water in Zhaoqing. The concentrations of organochlorinated pesticides (-BHC, -BHC, -BHC, DDT and DDE) changed little in all water samples except for the sewage water in Guangzhou. It seemed that these pesticides are more a residual signal than a direct discharge from point sources.     

Distribution of Polycyclic Aromatic Hydrocarbons in Aerosols and Dustfall in Macao

Polycyclic aromatic hydrocarbons (PAHs), widespread environmental pollutants, have been measured in aerosols and dustfall in Macao. In this paper, we compare concentration distributions and determine the partitioning of PAHs in aerosols and dustfall for different areas, sampling times and sampling heights. The results demonstrate that the concentrations of PAHs in aerosols and dustfall vary at the different sites and heights. The concentrations of PAHs and most of the individual PAHs in aerosols at night were higher than those in the daytime when using the unit of g/g and lower than those when using the unit of g m^-3. It is shown that the distribution of individual PAHs in aerosols differs significantly from that in dustfall.     

Monitoring the biotic aspects of our environment as a policy instrument

As all environmental programs also programs monitoring the biotic aspects of our environment (dealt with in this article) should contribute to a more effective and efficient environmental policy. These programs have to function therefore (as no other type of environmental information does, according to the authors) as cheap and efficient early warning and early control systems, providing decision makers with important and reliable monitoring results.How these monitoring programs should function in the decision making process is illustrated in abstract in this article by a simple control system with feedback (as shown in Figures 1, 2 and 3).The monitoring programs dealt with in this article should enable us to detect and forecast changes in the most important biotic aspects of our environment and-by continuous monitoring-to control whether the use of policy instruments has been effective or not in averting or diminishing unwanted changes (problems).Two options of decision makers with respect to monitoring results are shown (either to disregard unwanted changes as a problem or to accept these changes as a problem and to do something about them). To contribute to an effective and efficient environmental policy monitoring results therefore have to be important and reliable enough to react upon.The question is raised which biotic aspects in our environment are (or have to be considered as) important (because of their own value, as indicators and/or as biotic conditions) and how reliable monitoring results can (have to) be obtained.It is discussed how environmentalists could try to make it more difficult for decision makers to duck the problems (by monitoring only important aspects and by using only perfectly clear targets and standards) and how they could try at the same time to make it easier for them to take action (by setting up integrated environmental monitoring programs in order to find out how desired and undesired changes can be influenced). The role of active publicity is stressed in this connection.