Evaluation of Mass-Transfer Coefficient of Free Fall – Cascade-Aerator

The mass-transfer coefficient of a free-fall cascade-aeratorunit of 15 million litres per day was evaluated for its efficiency in the removal of a class of volatile organics, the trihalomethanes(THMs). These compounds are carcinogenic and occur as a resultof chlorination of natural waters. Due to the volatile nature ofthe THMs, the efficiency of aeration as a potential techniquefor their removal has been studied. The principle behindaeration is gas-transfer, according to which the gas-liquidinterface is hypothesized to consist of a gas and liquid filmthrough which gas is transferred by molecular diffusion untilequilibrium is attained. The overall mass transfer coefficient(K _L) of the aerator considering oxygen as the reference compound, was found to be29.3 hr^-1 for THMs.     

Analysis of heavy metal concentrations in sediments of selected estuaries of Malaysia—a statistical assessment

Statistical analysis of heavy metal concentrations in sediment was studied to understand the interrelationship between different parameters and also to identify probable source component in order to explain the pollution status of selected estuaries. Concentrations of heavy metals (Cu, Zn, Cd, Fe, Pb, Cr, Hg and Mn) were analyzed in sediments from Juru and Jejawi Estuaries in Malaysia with ten sampling points of each estuary. The results of multivariate statistical techniques showed that the two regions have different characteristics in terms of heavy metals selected and indicates that each region receives pollution from different sources. The results also showed that Fe, Mn, Cd, Hg, and Cu are responsible for large spatial variations explaining 51.15% of the total variance, whilst Zn and Pb explain only 18.93 of the total variance. This study illustrates the usefulness of multivariate statistical techniques for evaluation and interpretation of large complex data sets to get better information about the heavy metal concentrations and design of monitoring network.     

Simulation of impact of oil spill in the ocean – a case study of Arabian Gulf

To meet the growing energy demand worldwide, oil and gas exploration and production activities have increased rapidly both in onshore and offshore areas. The produced oil from the ocean bed is transported onshore either by ship or pipeline. This has increased the risk of oil spill in the coastal area. In order to prepare an emergency preparedness plan and to assess the magnitude of risk involved in transporting and offloading oil, oil spill simulation studies play an important role. This paper describes a simulation of oil spill in coastal bay of Arabian Gulf where new developments are taking place using MIKE 21 model. The developments include a diesel based thermal power plant near Sir Baniyas Island, which is an ecological fragile area. Based on the project activity, two probable scenarios, one for diesel leak (250 m3/h) for 1 h and the other for instantaneous spill (500 m3) are considered. The MIKE 21 model was calibrated for hydrodynamics using measured field data followed by diesel-spill simulation to track its movement in the Arabian Gulf. The results for both leak and instantaneous spill indicate that spilled diesel will not move towards the Sir Banyas Island and more than 45% of the diesel will be evaporated within 48 h of oil spill. Based on the results, a clean up and contingency plan is proposed to mitigate the adverse impacts arising due to diesel spill in the study area.     

Evaluation of environmental impacts of Integrated Industrial Estate��Pantnagar through application of air and water quality indices

Large-scale industrialization, population inflow, and rapid urbanization coupled with unfavorable meteorological conditions often induce significant degradation of urban environment. In order to assess the extent of environmental impacts due to establishment of the Integrated Industrial Estate??Pantnagar (IIE-Pantnagar), ambient air and groundwater were monitored from June 2007 to May 2008. Collected baseline information was normalized and interpreted with the application of air (AQI) and water quality indices (WQI). Among the pre-identified air pollutants, suspended particulate matter was found to be the principal culprit to deteriorate ambient air quality, with a maximum annual concentration of 418.5 ??g/m³. Monthly average concentrations of respirable particulate matter (aerodynamic diameter < 10 ??m) also persist at a critical level with an annual maximum of 207.3 ??g/m³. A segmented linear function with maximum operator concept was used to compute AQI, and the developed index was found well suitable to demonstrate temporal variations of ambient air quality. The computed AQI value for the selected study region varied from moderate (97.0) to very poor pollution level (309.2) in respect to developed air quality standards. Furthermore, an integrated WQI was developed comprising 9 parameters, and among all the 10 pre-identified locations, the average groundwater quality was found acceptable in terms of Indian drinking water standards. The maximum WQI (70.6) was found at the Kichha Railway Station during summer months, revealing moderate pollution load. Industrial discharge from IIE-Pantnagar coupled with other industrial setup may hold responsible for such kind of degradation of water quality. In contrast, WQI computed at Rudrapur City demonstrate minimum (15.0?C22.1) pollution load. For 95% of the monitoring period, the computed WQI was found acceptable for all selected locations with few exceptions. The application of WQI to assess temporal variations in groundwater quality was therefore found satisfactory.     

“Emission game”: some applications of the theory of games to the problem of CO2 emission

If there are no doubts that we must reduce the total emission of carbon dioxide, then the problem of how much different countries should be allowed to contribute to this amount remains a serious one. We suggest this problem to be considered as a non-antagonistic game (in Germeier's sense). A game of this kind is called an “emission game”. Suppose that there are n independent actors (countries or regions), each of them releasing a certain amount of CO₂ per year (in carbon units) into the atmosphere, and that the emission would be reduced by each actor. Each actor has his own aim: to minimise the loss in the Gross Domestic Product (GDP) caused by the reduction of emissions. On the other hand, taking into account that it is impossible to estimate more or less precisely the impact of the climate change on GDP for each country today, a common strategy will be to reduce the climate change. Since one of the main leading factors in global warming is the greenhouse effect, then the common aim will be to reduce the sum of emissions. This is a typical conflict situation. How to resolve it? We can weigh the “egoistic” and “altruistic” criteria for each actor introducing the so-called “coefficients of egoism”. This coefficient is very large, if the actor uses a very egoistic strategy, and conversely, if the actor is a “super-altruist”, then the corresponding coefficient is very small. Using these coefficients we get the general solution of the game in a form of some Pareto's equilibrium. The solution is stable and efficient.     

Analysis of acidic components, heavy metals and PAHS of particulate in the Changwon–Masan area of Korea

This study is an analysis of the concentrations and components of heavy metals in PM_2.5 and the total suspended particulate (TSP) collected at a mechanical industrial complex (IC) site in Changwon and at a residential site in Masan, Korea. Particulate was collected during two sampling periods, from the late summer to the early fall and from the middle to late fall, at the IC site and one sampling period, from the middle fall to the early winter, at the residential site. PM_2.5 and TSP samples were taken by an annular denuder system and a hi-volume air sampler, respectively. The authors also identified the concentrations and components of heavy metals extracted from the PM_2.5 and TSP filters, the acidic components extracted from the PM_2.5 filters, and the polycyclic aromatic hydrocarbons (PAHs) extracted from polyurethane foam (PUF) plug. The average concentrations of the PM_2.5 collected at the IC and residential sites were very similar. Major sources of PM_2.5 at the study sites, however, were air emissions from vehicles and industry as well as emissions from residential heating and soil origins, respectively. The higher concentrations of the TSP at the IC site, as compared to those at the residential site, were due to either increased suspended dust from vehicle emissions or re-suspended road dust because of increased vehicle speeds near the IC site. Heavy metal concentrations in the TSPs were higher than those in the PM_2.5. The heavy metal concentrations in the PM_2.5 and TSP at the IC site with heavy traffic were substantially greater than those at the residential site. The concentrations of TSP and heavy metals and PAHs in PM during the period of the middle to late fall was much higher than those during the period of the late summer to early fall at the IC site. This is because of the difference in meteorological characteristics and energy uses between two periods. The residential site also showed higher concentrations of acidic anions while the IC site showed higher concentrations of acidic cation. Secondary aerosols or particulates, such as ammonium nitrate or ammonium nitrite, might have been important constituents of the PM_2.5 at the residential site. The PAHs in the TSP collected at the IC site was greatly affected by traffic and industry emissions consisting mostly of high molecular weight PAHs with two to four rings. PAHs in the TSP at the site, however, were affected by residential heating and air emissions from small chemical plants having higher concentrations of low molecular weight PAHs with five to six rings.     

Time trend of Butyl- and Phenyl-Tin contamination in organisms of the Lagoon of Venice (1999–2003)

In the period 1999-2003 a monitoring study on the accumulation of organotin compounds in edible organisms in the Lagoon of Venice was conducted. Butyl and Phenyl derivatives were determined in pooled samples of Mytilus galloprovincialis and Tapes spp. with the aims of assessing organotin contamination in the Lagoon of Venice in the period just preceding their ban in Europe, monitoring the concentrations in organisms with a high commercial use, evaluating a potential hazard for human health due to seafood and identifying the possible contamination sources. Sampling stations (up to 20) were distributed around the Lagoon and particularly concentrated in the area close to the town of Chioggia. Significantly higher (analysis of variance (ANOVA), p < 0.05) tributyltin (TBT) concentrations were found in mussels (from 38 +/- 8 to 6,666 +/- 1,333 microg kg(-1) d.w., as TBT(+)), than in clams (from 6 +/- 1 to 2,256 +/- 451 microg kg(-1) d.w., as TBT(+)). During the 3 years of the survey no increase in average concentrations of the butyltin compounds (tributyltin (TBT) + dibutyltin (DBT) + monobutyltin (MBT)) was observed (ANOVA, p > 0.05) in either species. Furthermore, by analyzing the entire data set, it is evident that most stations show analogous concentrations in the 3 years for both species, whereas few have anomalously higher concentrations. If organotin concentrations in specimens from some sites are compared with the Tolerable Average Residue Level, a possible risk for human health must be considered.     

Status of Heavy Metals in Water and Bed Sediments of River Gomti – A Tributary of the Ganga River, India

The concentrations of cadmium, chromium, copper, iron, lead, manganese, nickel, and zinc in water and bed sediments of river Gomti have been studied in a fairly long stretch of 500 km from Neemsar to Jaunpur. Grab samples of water (October 2002–March 2003) and bed sediments (December 2002 and March 2003) were collected from 10 different locations following the standard methods. The river water and sediment samples were processed and analyzed for heavy metals viz., Cd, Cr, Cu, Fe, Pb, Mn, Ni, and Zn, and using ICP-AES. The heavy metals found in the river water were in the range: Cd (0.0001–0.0005 mg/L); Cr (0.0015–0.0688 mg/L); Cu (0.0013–0.0.0043 mg/L); Fe (0.0791–0.3190 mg/L); Mn (0.0038–0.0.0973 mg/L); Ni (0.0066–0.011 mg/L); Pb (0.0158–0.0276 mg/L); and Zn (0.0144–0.0298 mg/L) respectively. In the sediments the same were found in the range: Cd (0.70–7.90 g/g); Cr (6.105–20.595 g/g); Cu (3.735–35.68 g/g); Fe (5051.485–8291.485 g/g); Mn (134.915–320.45 g/g); Ni (13.905–37.370 g/g); Pb (21.25–92.15 g/g); and Zn (15.72–99.35 g/g) of dry weight respectively. Some physico-chemical parameters viz., pH, total solids, total dissolved solids, total suspended solids, dissolved oxygen, biological oxygen demand, chemical oxygen demand, hardness etc. were estimated as these have direct or indirect influence on the incidence, transport and speciation of the heavy metals. Based on the geoaccumulation indices, the Gomti river sediments from Neemsar to Jaunpur are considered to be unpolluted with respect to Cr, Cu, Fe, Mn, and Zn. It is unpolluted to moderately polluted with Pb. In case of Cd it varies from moderately polluted to highly polluted. As far as Ni is concerned the sediment is very highly polluted at Barabanki and Jaunpur D/s. No correlation was found between enrichment factor and geoaccumulation index.     

Design and assembly of an experimental laboratory for the study of atmosphere–plant interactions in the system of fumigation chambers

A 5-day biochemical oxygen demand (BOD(5)) test has been used as the standard measurement of organic pollution in rivers worldwide. However, it may be argued that BOD is not a sufficient indicator of organic pollution when nitrogenous biochemical oxygen demand (NBOD) is present in water samples. In this study, BOD, NBOD, and carbonaceous biochemical oxygen demand (CBOD) of treated sewage effluent (TSE) were measured near at the discharge outlet of 3 sewage treatment plants (STPs) in Sakai, Itachi, and Kashio rivers in Central Japan. Additional measurements were conducted at one point upstream and two points downstream from the STP discharge points in the rivers. It was estimated that NBOD values in the TSE of Sakai River, Kashio River and Itachi River accounted for 54%, 69% and 18% of their BOD values, respectively. Respective NH4+ and NO2- concentrations were positively correlated with those of NBOD values in Sakai, Itachi, and Kashio rivers. The BOD loads from the TSE were estimated to be 2.2, 5.7, and 1.2 times higher than the CBOD loads in the Sakai, Itachi, and Kashio rivers, respectively. The variation of the portion of NBOD values of each TSE, as well as the ratios of CBOD to BOD loads, was attributed to the difference in each STP system. Consequently, the NH4+ and NO2- of TSE led to the increase of NBOD in the Sakai River basin.     

Numerical Modeling of Flow Fields and Dispersion of Passive Pollutants in the Vicinity of the Temelín Nuclear Power Plant

This study deals with numerical simulation of flow fields and dispersion of model passive admixtures in the planetary boundary layer in a 10 × 10 km square area, centered on the Czech Republic’s Temelín Nuclear Power Plant. Numerical calculations of three-dimensional flow fields with eight basic wind directions given for the inlet boundary of the computational domain are performed using the FLUENT CFD code with the standard k – ε turbulence model. The resultant modeling of the flow fields provides information as to probable local directions and velocities of flow vectors on a horizontal scale of 100 m, which are consistent with the data given for the boundaries of the calculation area in the framework of a scale of 10 km. The modeled flow fields generate the input data for related Lagrangian simulation of the ground concentration and deposition fields of passive particles assumedly emitted at the site of the Temelín plant. Simulated plumes describe eight cases of potential ground-level distribution of model passive admixtures in the area.     

Estimation of Emissions of γ-Hexachlorcyclohexane from the Great Lakes–St. Lawrence Ecosystem Using a Coupled Efficient Kalman Filter–Atmospheric Transport–Soil Model

An efficient linear Kalman filter has been combined with a coupled atmospheric transport and soil–air exchange model to determine organochlorine pesticides emissions on the regional scale. In this study, results of -HCH emissions from the Great Lakes–St. Lawrence ecosystem, estimated from the coupled model, are presented and discussed. A source receptor technique is used to identify a priori the locations of emission sources of -HCH, the emissions are then updated through a Kalman filtering procedure which minimizes the weighted difference between the predicted mixing ratios from the coupled model and the measured concentrations over the Great Lakes–St. Lawrence river region. Two experiments using the inverse algorithm are carried out. In the first experiment, the coupled atmospheric transport and soil–air exchange model is implemented to predict -HCH air and soil concentrations. Emissions are then updated every 12 days using the updated soil concentrations and emission factors. However, the updated emissions are not input into the coupled atmospheric transport and soil–air exchange model. On the other hand, in the second experiment the updated emissions are fed back to the coupled model, so that the model is reinitialized in each 12 days. The results from the inverse technique for the year 1995 have been compared with grided -HCH emission inventory in Canada, generated by emission factors. It is shown that the estimated emissions of -HCH are consistent with the measured emissions. It is found that the St. Lawrence valley has larger emissions of -HCH than the Great Lakes region, indicating an opposite distribution to the emission usage inventory, but in agreement with the measured -HCH concentration.     

Informing global environmental policy‐making: A plea for new methods of assessment and synthesis

Practice and research in assessment of global environmental change are dominated by two conventional assessment methods, formal models and expert panels. Models construct a representation of biophysical and socioeconomic components of a policy issue, to project future trends or consequences of interventions. Panels articulate consensus views of policyrelevant knowledge through deliberations among selected experts. These methods make valuable contributions, but are weak in addressing certain kinds of knowledge needs that are typical of globalchange issues. To address these needs, a set of novel assessment methods is proposed that combine elements of representation and deliberation. These methods, of which policy exercises, simulationgaming, and scenario exercises are examples, involve human participants in structured relevant decision and task settings. Relative to models and panels, these methods can more readily incorporate diverse perspectives, can integrate across broader collections of knowledge domains, and can both encourage creative insights and innovations, and provide tests of their relevance and practicality. Risks of bias, and of overconfident generalization from unique experiences, are effectively mitigated by critical debriefings, and appear no more severe than corresponding risks in conventional assessment methods, or in policymakers generalizations from historical experience. While serious development and implementation challenges remain, early experience suggests that these methods can offer useful ideas and insights for policymaking that are not available through other means.     

Routine Measurement of Dissolved Inorganic 15N in Precipitation and Streamwater

The difficulty of measuring 15N in dilute solutions has limited the potential of ecosystem labeling experiments and model comparisons. By concentrating the N from large (up to 20 L) water samples on ion-exchange resin columns, we obtained enough N for accurate and reproducible 15N measurement using the Teflon tape diffusion method. Analysis of standards demonstrated >95% recovery of inorganic N from samples, and 15N values comparable to those obtained using standard distillation methods. The value of the blank at our laboratory was 0.16 moles N. Analytical precision was within 2 15N when samples of streamwater from the Bear Brook Watersheds (1800 eq · ha-1 · yr-1 N addition at 192 15N) were kept frozen until analysis. The analytical process is lengthy, but once set up can easily be performed for large numbers of samples.     

Respiratory Suspended Particulate (RSP) Concentration and its Implications to Roadside Workers: A Case Study of Hong Kong

The adsorption behaviour of Diphenylamine (DPAM), napthylamine ( NAM), napthylamine ( NAM)and aniline on pyrolusite and activated carbon has been studied.Pyrolusite shows remarkable sorption capacity for DPAM and NAM as compared to aniline; (the adsorption followed theorder:Activated Carbon: DPAM = NAM > AnilinePyrolusite: DPAM: NAM > NAM> Aniline)The maximum adsorption of NAM occurred in theconcentration range 4–20 g mL^-1 on pyrolusite (95%)and 4–50 g mL^-1 on activated carbon (100%). Theeffect of various doses of activated carbon on the adsorption of NAM confirm Langmuir and Freundlich isotherms where asFreundlich isotherm is obeyed by pyrolusite. The adsorption of NAM on both the absorbents is not affected in presence ofDPAM over a wide range of their initial concentrations (20–60g mL^-1). The desorption studies of NAM onpyrolusite was carried out by batch as well as column processes.Excellent results were obtained when a mixture of n-hexane andisopropanol (91:1) was used as eluent.     

Living with a large reduction in permited loading by using a hydrograph-controlled release scheme

The Total Maximum Daily Load (TMDL) for ammonia and biochemical oxygen demand for the Pee Dee, Waccamaw, and Atlantic Intracoastal Waterway system near Myrtle Beach, South Carolina, mandated a 60-percent reduction in point-source loading. For waters with a naturally low background dissolved-oxygen concentrations, South Carolina anti-degradation rules in the water-quality regulations allows a permitted discharger a reduction of dissolved oxygen of 0.1 milligrams per liter (mg/L). This is known as the 0.1 rule. Permitted dischargers within this region of the State operate under the 0.1 rule and cannot cause a cumulative impact greater than 0.1 mg/L on dissolved-oxygen concentrations. For municipal water-reclamation facilities to serve the rapidly growing resort and retirement community near Myrtle Beach, a variable loading scheme was developed to allow dischargers to utilize increased assimilative capacity during higher streamflow conditions while still meeting the requirements of a recently established TMDL.As part of the TMDL development, an extensive real-time data-collection network was established in the lower Waccamaw and Pee Dee River watershed where continuous measurements of streamflow, water level, dissolved oxygen, temperature, and specific conductance are collected. In addition, the dynamic BRANCH/BLTM models were calibrated and validated to simulate the water quality and tidal dynamics of the system. The assimilative capacities for various streamflows were also analyzed.The variable-loading scheme established total loadings for three streamflow levels. Model simulations show the results from the additional loading to be less than a 0.1mg/L reduction in dissolved oxygen. As part of the loading scheme, the real-time network was redesigned to monitor streamflow entering the study area and water-quality conditions in the location of dissolved-oxygen sags. The study reveals how one group of permit holders used a variable-loading scheme to implement restrictive permit limits without experiencing prohibitive capital expenditures or initiating a lengthy appeals process.     

Separation of selected PAHs by using high performance capillary electrophoresis with modifiers

The effect of varying SDS concentration in a micellar electrokinetic capillary chromatographic system (MECC) is investigated. In addition, the introduction of -cyclodextrin as modifier to the electrophoretic medium, containing SDS and a phosphate-borate buffer, is shown to give satisfactory separation of the seven selected PAHs. The separation efficiency is increased with the addition of -cyclodextrin.     

Foraminifera as bioindicators in coral reef assessment and monitoring: the FORAM Index. Foraminifera in Reef Assessment and Monitoring

Coral reef communities are threatened worldwide. Resource managers urgently need indicators of the biological condition of reef environments that can relate data acquired through remote-sensing, water-quality and benthic-community monitoring to stress responses in reef organisms. The FORAM (Foraminifera in Reef Assessment and Monitoring) Index (FI) is based on 30 years of research on reef sediments and reef-dwelling larger foraminifers. These shelled protists are ideal indicator organisms because: Foraminifers are widely used as environmental and paleoenvironmental indicators in many contexts; Reef-building, zooxanthellate corals and foraminifers with algal symbionts have similar water-quality requirements; The relatively short life spans of foraminifers as compared with long-lived colonial corals facilitate differentiation between long-term water-quality decline and episodic stress events; Foraminifers are relatively small and abundant, permitting statistically significant sample sizes to be collected quickly and relatively inexpensively, ideally as a component of comprehensive monitoring programs; and Collection of foraminifers has minimal impact on reef resources.USEPA guidelines for ecological indicators are used to evaluate the FI. Data required are foraminiferal assemblages from surface sediments of reef-associated environments. The FI provides resource managers with a simple procedure for determining the suitability of benthic environments for communities dominated by algal symbiotic organisms. The FI can be applied independently, or incorporated into existing or planned monitoring efforts. The simple calculations require limited computer capabilities and therefore can be applied readily to reef-associated environments worldwide. In addition, the foraminiferal shells collected can be subjected to morphometric and geochemical analyses in areas of suspected heavy-metal pollution, and the data sets for the index can be used with other monitoring data in detailed multidimensional assessments.     

Persistent organochlorine residues in fish and water birds from the Biobio river,Chile

Concentrations of polychlorinated biphenyls (PCBs), DDT and its metabolites, HCH isomers and hexachlorobenzene (HCB) were determined in fish and birds from different locations in the Biobio river basin (central Chile). Samples collected near the mouth of the river contained high concentrations of PCBs, reflecting the massive use of these xenobiotics in the urban and industrial areas of Concepcion and Talcauano. Samples collected in the central part of the basin contained very high concentrations of lindane that coincide with the widespread use of lindane-based pesticides (purified -HCH) in this area. DDT was distributed homogeneously throughout the basin, except at Laguna Icalma, the source of the river in the Andes. Most PCB residues in fish and birds consisted of congeners between penta- and hepta-chlorobiphenyls. In fish, the predominant congeners were the pentachlorobiphenyl 23445 (IUPAC number 118) and the hexachlorobiphenyl 2234455 (PCB-153); in birds 224455 (PCB-180) prevailed.     

Insecticide Contamination of Jamaican Environment. V. Island-Wide Rapid Survey of Residues in Surface and Ground Water

Residues of organochlorines and organophosphates were determined by gas chromatography in water and sediment from 26 locations in 17 major rivers, 7 natural springs and 13 wells across Jamaica. Samples were collected on only one occasion between May and July, 1994. Residues of endosulfan were detected in all but three rivers; -endosulfan in 15 samples of sediment (0.9–108.1, mean = 28.93, S.E. = 7.198 g kg-1) and 13 of water (0.01–0.35, mean = 0.11, S.E. = 0.035 g L-1), -endosulfan in 5 sediment (15.29–49.35, mean = 30.56, S.E. = 7.132 g kg-1) and 12 water (0.05–0.31, mean = 0.14, S.E. = 0.031 g L-1) samples, and endosulfan sulphate in waters of three rivers (0.003–0.244 g L-1). Chlorpyrifos was present in 9 sediment (0.423-135.2, mean = 18.38, S.E. = 10.699 g kg-1) and two water (0.001–0.022 g L-1) samples, diazinon and ethoprophos in the sediment of one river each. Mean levels (g L-1) of and isomers and sulphate of endosulfan were 0.16 (S.E. = 0.057), 0.12 (S.E. = 0.036) and 0.15 (S.E. = 0.089), respectively, in four of the seven springs and 0.23 (S.E. = 0.052), 0.11 (S.E. = 0.029) and 0.26 (S.E. = 0.088), respectively, in seven of the thirteen wells monitored.