Application of intrawell testing of RCRA groundwater monitoring data when no upgradient well exists

A statistical quality control approachto detect changes in groundwater quality from aregulated waste unit is described. The approachapplies the combined Shewhart-CUSUM control chartmethodology for intrawell comparison of analyteconcentrations over time and does not require anupgradient well. A case study from the U.S.Department of Energy's Hanford Site is used forillustration purposes. This method is broadlyapplicable in groundwater monitoring programs wherethere is no clearly defined upgradient location, thegroundwater flow rate is exceptionally slow, or wherea high degree of spatial variability exists inparameter concentrations. This study also indicatesthat the use of the Data Quality Objectives (DQO)process can assist in designing an efficient andcost-effective groundwater monitoring plan to achievethe optimum goal of both low false positive and lowfalse negative rates (high power).     

Assessment of metal contamination using X-ray fluorescence spectrometry and the toxicity characteristic leaching procedure (TCLP) during remediation of a waste disposal site in Antarctica

The remediation of the Thala Valley landfill, Casey Station, East Antarctica, is part of efforts to clean-up contaminated sites associated with the Australian Antarctic Program. These sites, ranging from abandoned rubbish dumps to fuel spills, are contaminated principally with metals and petroleum hydrocarbons. Remediation success depends on accurate, cost-effective and timely--fit-for-purpose--chemical analysis of soil and water samples from the site, which is required to guide excavation, the in situ or off-site treatment and disposal of contaminated material, and to validate satisfactory remediation. Owing to the remote location of Antarctica, it is necessary to carry out chemical analyses on-site. Waste and soil contaminated with Pb, Zn, Cd, and Cu were excavated from Thala Valley for removal to Australia, treatment and disposal. Analysis of total metal concentrations in soil was performed at Casey Station with a transportable energy dispersive X-ray fluorescence (EDXRF) spectrometer. Soil samples were prepared using a simple size-fractionation method to expedite sample throughput. A method for assessing contaminant mobility in solid waste (toxicity characteristic leaching procedure, TCLP) was also used to characterise soil. Although this was more labour-intensive and time-consuming than the total metals analysis, it was of great utility because leachable metals were often significant determinants in the assessment of contaminated soil. The combined data helped managers during remediation, directing excavation and allowing waste to be classified for treatment and disposal before its return to Australia.     

A risk-based screening approach for prioritizing contaminants and exposure pathways at Superfund sites

Contamination at Superfund sites can involve mixtures of chemicals and radionuclides in a variety of environmental media. Determining priorities for evaluation and remediation of various contaminants is an important part of the initial phases of any site investigation. An effective screening analysis at the beginning of the project can help by identifying both those situations in need of immediate remedial attention and those which require further sampling and evaluation. The screening approach discussed here is made up of two sets of calculations designed to provide upper- and lower-bound estimates of health risk to individuals likely to receive the highest exposures. This approach allows rapid identification of contaminants which pose a negligible risk and can be assigned a low priority for remedial attention or which pose a substantial risk and should be given the highest priority for appropriate remediation efforts. Contaminants designated as neither high- nor low-priority should be investigated in more detail prior to making decisions regarding the need for or method of remediation. The utility of this approach has already been demonstrated in the evaluation of contamination in the Clinch and Tennessee River systems originating from historical operations of atomic weapons and energy research facilities near Oak Ridge, Tennessee.     

PCDD/F contamination on surface soil in the vicinity of a hazardous waste incinerator: is it possible a different trend?

This study is the first to investigate the contamination of polychlorinated dibenzo-p-dioxins and polychlorinated dibenzofurans (PCDD/Fs) on surface soils in the vicinity of the first hazardous waste incinerator of Turkey. In the study, 24 soil samples were taken from a 1625-m-radius circle whose center is the stack of the incinerator. This process was repeated 1 year later. Since the acquired average PCDD/F concentrations of the two sampling campaigns (0.05 and 0.02 ng WHO-toxic equivalent (TEQ)/kg) were meaningfully low compared to the related literatures, a new sampling campaign was carried out to control this inconsistency, but this time in a foreign laboratory (0.56 ng WHO-TEQ/kg). In the same period, eight gas samples were taken from the stack under different operational conditions of the facility. According to the evaluations of the findings, the geographical-meteorological data of the study area and the specific operational conditions of the facility corroborate the concentrations of the first and the second soil samplings rather than the third one. The major underlying reason for the inconsistency of the soil concentrations may be the fact that the data analysis procedures used by the laboratories are different. The author suggests a hypothesis which argues that the soils in the vicinity of a hazardous waste incinerator may have significantly lower concentration levels than in related literatures.     

Fingerprinting of petroleum hydrocarbons (PHC) and other biogenic organic compounds (BOC) in oil-contaminated and background soil samples

Total petroleum hydrocarbons (TPH) or petroleum hydrocarbons (PHC) are one of the most widespread soil contaminants in Canada, the United States and many other countries worldwide. Clean-up of PHC-contaminated soils costs the Canadian economy hundreds of millions of dollars annually. In Canada, most PHC-contaminated site evaluations are based on the methods developed by the Canadian Council of the Ministers of the Environment (CCME). However, the CCME method does not differentiate PHC from BOC (the naturally occurring biogenic organic compounds), which are co-extracted with petroleum hydrocarbons in soil samples. Consequently, this could lead to overestimation of PHC levels in soil samples. In some cases, biogenic interferences can even exceed regulatory levels (300 μg g(-1) for coarse soils and 1300 μg g(-1) for fine soils for Fraction 3, C(16)-C(34) range, in the CCME Soil Quality Level). Resulting false exceedances can trigger unnecessary and costly cleanup or remediation measures. Therefore, it is critically important to develop new protocols to characterize and quantitatively differentiate PHC and BOC in contaminated soils. The ultimate objective of this PERD (Program of Energy Research and Development) project is to correct the misconception that all detectable hydrocarbons should be regulated as toxic petroleum hydrocarbons. During 2009-2010, soil and plant samples were collected from over forty oil-contaminated and paired background sites in various provinces. The silica gel column cleanup procedure was applied to effectively remove all target BOC from the oil-contaminated sample extracts. Furthermore, a reliable GC-MS method in combination with the derivatization technique, developed in this laboratory, was used for identification and characterization of various biogenic sterols and other major biogenic compounds in these oil-contaminated samples. Both PHC and BOC in these samples were quantitatively determined. This paper reports the characterization results of this set of 21 samples. In general, the presence of petroleum-characteristic alkylated PAH homologues and biomarkers can be used as unambiguous indicators of the contamination of oil and petroleum product hydrocarbons; while the absence of petroleum-characteristic alkylated PAH homologues and biomarkers and the presence of abundant BOC can be used as unambiguous indicators of the predominance of natural organic compounds in soil samples.     

Development of an Expert System for the Remediation of Petroleum-Contaminated Sites

Groundwater and soil contamination caused by light nonaqueous phase liquids (LNAPLs) spills and leakage in petroleum industry is currently one of the major environmental concerns in North America. Numerous site remediation technologies, generally classified as ex situ and in situ remediation techniques, have been developed and implemented to clean up the contaminated sites in the last two decades. One of the problems associated with ex situ remediation is the cost of operation. In recent years, in situ techniques have acquired popularity. However, the selection process of the desired techniques needs a large amount of knowledge. Insufficient expertise in the process may result in unnecessary inflation of expenses. In this study, petroleum waste management experts and Artificial Intelligence (AI) researchers worked together to develop an expert system (ES) for the management of petroleum contaminated sites. Various AI techniques were used to construct a useful tool for site remediation decision-making. This paper presents the knowledge engineering processes of knowledge acquisition, conceptual design, and system implementation in the project. The expert system was applied to a real-world case study and the results show that the expert system can generate desired remediation alternatives to assist decision-makers. The application case study constitutes partial validation of the prototype expert system.     

Identification and leaching characteristics of sludge generated from metal pickling and electroplating industries by Toxicity Characteristics Leaching Procedure (TCLP)

One of India's major concerns is the increasing level of land pollution largely due to the uncontrolled disposal of industrialsolid and hazardous waste. With rapid industrialization, thegeneration of industrial solid and hazardous waste has increasedappreciably and the nature of waste generated has become complex.Their impacts on the ecological bodies are noticeable. The article describes the details of studies conducted using Toxicity Characteristics Leaching Procedure, to estimate the toxicity effects of the metals viz., chromium, zinc, manganese,iron, nickel, cobalt and copper by the Zero Headspace Extractorfor the sludges generated from effluent treatment plant of steeltube, wire and plating industries on environment constituentslike groundwater, surface water and land. Toxicity Characteristics Leaching Procedure determines the mobility of organic and inorganic analytes of liquid, solid or multiphase waste from hazardous solid wastes in the form of primary and secondary extracts. These extracts are mixed in equal volumeproportion and analyzed by Direct Reading 2000 spectrophotometer.The amount of heavy metals observed during the studies in theleachates were found and the results were compared with HazardousWaste categories as per Indian Standards, TCLP regulatory limitsgiven by United States Environment Protection Agency (USEPA) andGermany Leachate Quality Standards and it was observed that theywere on higher side, needing a proper preventive concept of sludge management including handling, treatment, recovery and disposal.     

Determination of Background Concentrations of Inorganics in Soils and Sediments at Hazardous Waste Sites

Hazardous waste sites may pose a threat to human health and the environment when toxic substances are released. However, the contaminants present at a waste site may have originated on-site (i.e., resulting from releases attributable to site activities) or off-site (i.e., resulting from sources not on-site). Off-site substances may result either from natural sources (e.g., erosion of naturally occurring mineral deposits) or anthropogenic sources (e.g., widespread contamination from automobile exhaust in urban areas). To determine the appropriate action to take at a hazardous waste site, the U.S. Environmental Protection Agency (EPA) must distinguish between substances directly attributable to the hazardous waste site (i.e., site contaminants) and those attributable to natural background concentrations. The most important factor to consider when determining background concentrations is to ensure that the physical, chemical, and biological aspects of the media to be sampled at both the contaminated site and the background site are as similar as possible. Inorganics, in particular metals, are addressed. Radionuclides are not specifically addressed; however, metals with radioactive isotopes that may be encountered at hazardous waste sites are included. There are references and data included in this paper that provide average concentrations and reference values for selected soils and sediments in the United States. Suggested sampling and monitoring design approaches that could be used by scientists and engineers faced with how to determine background concentrations are identified. The issues discussed include the selection of background sampling locations, considerations in the selection of sampling procedures, and statistical analyses for determining whether contaminant levels are significantly different on a potential waste site compared with a background site.     

制订我国污染场地土壤风险筛选值的几点建议

近年来,我国大中城市陆续开展污染企业搬迁,环境管理上要求对搬迁场地进行商业开发前必须开展场地环境调查、风险评估和修复,客观上要求有一套场地环境评价标准和污染土壤修复标准.针对目前国内污染场地标准缺失及盲目引用国外相关筛选值出现的误区,分析了美国、荷兰和英国土壤筛选值差异的主要原因,为合理借鉴国外土壤筛选值及其制定方法学...     

农业土壤危险废物污染的风险管理

从环境风险管理出发,探讨危险废物对农业土壤污染的途径,提出土壤危险废物污染的风险管理内容和方法,初步建立辽宁省农业土壤危险废物污染的预警指标体系。     

Uncertainty assessment of mapping mercury contaminated soils of a rapidly industrializing city in the Yangtze River Delta of China using sequential indicator co-simulation

Accurate characterization of heavy-metal contaminated areas and quantification of the uncertainties inherent in spatial prediction are crucial for risk assessment, soil remediation, and effective management recommendations. Topsoil samples (0–15 cm) (n = 547) were collected from the Zhangjiagang suburbs of China. The sequential indicator co-simulation (SIcS) method was applied for incorporating the soft data derived from soil organic matter (SOM) to simulate Hg concentrations, map Hg contaminated areas, and evaluate the associated uncertainties. High variability of Hg concentrations was observed in the study area. Total Hg concentrations varied from 0.004 to 1.510 mg kg⁻¹ and the coefficient of variation (CV) accounts for 70%. Distribution patterns of Hg were identified as higher Hg concentrations occurred mainly at the southern part of the study area and relatively lower concentrations were found in north. The Hg contaminated areas, identified using the Chinese Environmental Quality Standard for Soils critical values through SIcS, were limited and distributed in the south where the SOM concentration is high, soil pH is low, and paddy soils are the dominant soil types. The spatial correlations between Hg and SOM can be preserved by co-simulation and the realizations generated by SIcS represent the possible spatial patterns of Hg concentrations without a smoothing effect. Once the Hg concentration critical limit is given, SIcS can be used to map Hg contaminated areas and quantitatively assess the uncertainties inherent in the spatial prediction by setting a given critical probability and calculating the joint probability of the obtained areas.     

The equivalence of diffusive samplers to reference methods for monitoring O3, benzene and NO2 in ambient air

A study of the equivalence to the reference methods of the Radiello samplers for ozone (O(3)) and benzene as well as the membrane-closed Palmes tube (MCPT) for nitrogen dioxide (NO(2)) is presented. These samplers benefit from new model equations capable of estimating their uptake rate. For O(3), the aim here was to demonstrate the equivalence for the reference period of 8 h and 120 microg m(-3), the target value of the 3rd European Daughter Directive. For benzene, the demonstration of equivalence to the annual limit value of 5 microg m(-3) of the 2nd European Daughter Directive was examined. In the case of NO(2), the equivalence to the annual limit value of the 1st European Daughter Directive (40 microg m(-3)) was considered. Results show that the radial sampler for O(3) fails to meet the Data Quality Objective (DQO) for continuous monitoring. However, with an expanded uncertainty of less than 30%, the O(3) diffusive sampler fulfils the DQO for indicative measurements. For benzene, the Radiello sampler exposed for 7 days gave satisfying results showing the ability of the sampler to meet the DQO of the reference method. Nevertheless, the field tests should be complemented by measurements for a wider range of benzene concentrations. In the case of NO(2), all the results of the laboratory and field experiments respected the requirements necessary for the demonstration of equivalence. Overall, these findings thus show that the Radiello sampler and the MCPT are equivalent to the reference methods only for assessment of benzene and NO(2), respectively.     

土壤重金属污染的工程危害及修复方法

分析了重金属污染对地基土和地下结构物的危害,比较了电动修复、土壤冲刷、原位土壤淋洗、化学固化修复土壤的优缺点,重点介绍固化/稳定化技术在修复重金属污染土壤中的应用。     

Bioremediation of heavy metals using biostimulation in laboratory bioreactor

The present research study investigates bioremediation potential of biostimulated microbial culture isolated from heavy metals waste disposal contaminated site located at Bhayander (east), Mumbai, India. The physicochemical and microbial characterization including heavy metal contaminants have been studied at waste disposal site. The microorganisms adapted at heavy metal-contaminated environment were isolated, cultured, and biostimulated in minimal salt medium under aerobic conditions in a designed and developed laboratory bioreactor. Heavy metals such as Fe, Cu, and Cd at a selected concentration of 25, 50, and 100?μg/ml were taken in bioreactor wherein biostimulated microbial culture was added for bioremediation of heavy metals under aerobic conditions. The remediation of heavy metals was studied at an interval of 24?h for a period of 21?days. The biostimulated microbial consortium has been found effective for remediation of Cd, Cu, and Fe at higher concentration, i.e., 100?mg/l up to 98.5%, 99.6%, and 100%, respectively. Fe being a micronutrient was remediated completely compared to Cu and Cd. During the bioaccumulation of heavy metals by microorganisms, environmental parameters such as pH, total alkalinity, electronic conductivity, biological oxygen demand, chemical oxygen demand, etc. were monitored and assessed. The pilot scale study would be applicable to remediate heavy metals from waste disposal contaminated site to clean up the environment.     

重金属污染土壤及场地的植物修复技术发展与应用

重金属污染土壤及场地的治理工作迫在眉睫,植物修复技术以其成本低、不破坏土壤生态环境、无二次污染、易被公众接受等优点,受到了学术界的广泛关注.近年来,国内外在植物修复技术的植物资源筛选、调控技术、修复植物产后处理等方面进行了广泛的研究.植物修复已经从实验室阶段走向了田间示范和推广应用阶段.现就近年来植物修复技术在重金属污...     

Biocomplementation of SVE to achieve clean-up goals in soils contaminated with toluene and xylene

Soil vapor extraction (SVE) and bioremediation (BR) are two of the most common soil remediation technologies. Their application is widespread; however, both present limitations, namely related to the efficiencies of SVE on organic soils and to the remediation times of some BR processes. This work aimed to study the combination of these two technologies in order to verify the achievement of the legal clean-up goals in soil remediation projects involving seven different simulated soils separately contaminated with toluene and xylene. The remediations consisted of the application of SVE followed by biostimulation. The results show that the combination of these two technologies is effective and manages to achieve the clean-up goals imposed by the Spanish Legislation. Under the experimental conditions used in this work, SVE is sufficient for the remediation of soils, contaminated separately with toluene and xylene, with organic matter contents (OMC) below 4 %. In soils with higher OMC, the use of BR, as a complementary technology, and when the concentration of contaminant in the gas phase of the soil reaches values near 1 mg/L, allows the achievement of the clean-up goals. The OMC was a key parameter because it hindered SVE due to adsorption phenomena but enhanced the BR process because it acted as a microorganism and nutrient source.     

Post-remediation evaluation of a LNAPL site using electrical resistivity imaging

Present understanding of the earth's subsurface is most often derived from samples at discrete points (wells) and interpolations or models that interpret the space between these points. Electrical resistivity imaging techniques have produced an improved capability to map contaminants (especially NAPLs--NonAqueous Phase Liquids) away from traditional wells using actual field data. Electrical resistivity image data, confirmed by drilling, have demonstrated that LNAPL (Light NAPL--less dense than water, such as gasoline) contaminants exist outside of a delineated and remediated area in Golden, Oklahoma. The data also demonstrate that LNAPL exists between monitoring and remediation wells which indicate low contaminant levels when sampled. Additionally, the electrical images provided the drilling location with the highest concentration of hydrocarbon ever found on the site, even after two phases of remediation work had been performed, although the sampling protocols varied. The results indicate that current methods of post-remediation site characterization are inadequate for complete site characterization.     

Three-dimensional data interpolation for environmental purpose: lead in contaminated soils in southern Brazil

Monitoring of heavy metal contamination plume in soils can be helpful in establishing strategies to minimize its hazardous impacts to the environment. The objective of this study was to apply a new approach of visualization, based on tridimensional (3D) images, of pseudo-total (extracted with concentrated acids) and exchangeable (extracted with 0.5 mol L^?1 Ca(NO₃)₂) lead (Pb) concentrations in soils of a mining and metallurgy area to determine the spatial distribution of this pollutant and to estimate the most contaminated soil volumes. Tridimensional images were obtained after interpolation of Pb concentrations of 171 soil samples (57 points × 3 depths) with regularized spline with tension in a 3D function version. The tridimensional visualization showed great potential of use in environmental studies and allowed to determine the spatial 3D distribution of Pb contamination plume in the area and to establish relationships with soil characteristics, landscape, and pollution sources. The most contaminated soil volumes (10,001 to 52,000 mg Pb kg^?1) occurred near the metallurgy factory. The main contamination sources were attributed to atmospheric emissions of particulate Pb through chimneys. The large soil volume estimated to be removed to industrial landfills or co-processing evidenced the difficulties related to this practice as a remediation strategy.     

江苏省土壤修复产业发展现状及对策分析

简述了江苏省土壤修复市场发展情况及土壤修复技术发展现状。从营商环境、市场竞争力、标准法规建设等方面分析存在的市场问题,提出应规范市场环境、培育企业竞争力,加强标准制定、模式创新和人才培养的建议。针对场地环境调查与风险评估技术有待提升、地下水修复技术研发工作投入不足、修复后土壤监测和安全再利用问题突出等技术问题,提出,应完善环境调查与风险评估技术研究,加强土水修复材料、装备与工艺研发,提升长期监测及修复再利用研究的建议。以期为土壤修复行业的良性发展提供有益参考。     

Management of hospitals solid waste in Khartoum State

This research had been conducted during year 2012 to review existing data on hospital waste management for some of Khartoum town hospitals and to try to produce appropriate proposals acceptable for waste management and final treatment methods. The overall status of hospital waste management in Khartoum has been assessed through direct visits and designated questionnaires. Eight main hospitals were covered in the study with an overall bed capacity of 2,978. The current waste management practice observed at all studied hospitals was that most of waste, office, general, food, construction debris, and hazardous chemical materials were all mixed together as they are generated, collected, and finally disposed of. Only a small portion of waste in some hospitals (part of potentially infectious, body parts, and sharps) are collected separately and treated in a central incinerator. The estimated value of per bed generation rate in the studied hospitals was found to be 0.87 kg/day, which lies within the range for the low-income countries. In all studied hospitals, it was found that workers were working under very poor unsafe conditions with very low salaries ($35 to $45 per month on average). About 90 % were completely illiterate or had very low education levels. At the national level, no laws considering hospital waste, or even hazardous waste, were found; only some federal general environmental regulations and some procedures from town and city localities for controlling general municipal waste exist. At the hospital level, no policies or rules were found, except in the radiotherapy center, where they manage radioactive wastes under the laws of the Sudanese Atomic Agency. Urgent actions are needed for the remediation and prevention of hazards associated with this type of waste.