Evaluation of Mass-Transfer Coefficient of Free Fall – Cascade-Aerator

The mass-transfer coefficient of a free-fall cascade-aeratorunit of 15 million litres per day was evaluated for its efficiency in the removal of a class of volatile organics, the trihalomethanes(THMs). These compounds are carcinogenic and occur as a resultof chlorination of natural waters. Due to the volatile nature ofthe THMs, the efficiency of aeration as a potential techniquefor their removal has been studied. The principle behindaeration is gas-transfer, according to which the gas-liquidinterface is hypothesized to consist of a gas and liquid filmthrough which gas is transferred by molecular diffusion untilequilibrium is attained. The overall mass transfer coefficient(K _L) of the aerator considering oxygen as the reference compound, was found to be29.3 hr^-1 for THMs.     

Simulation of impact of oil spill in the ocean – a case study of Arabian Gulf

To meet the growing energy demand worldwide, oil and gas exploration and production activities have increased rapidly both in onshore and offshore areas. The produced oil from the ocean bed is transported onshore either by ship or pipeline. This has increased the risk of oil spill in the coastal area. In order to prepare an emergency preparedness plan and to assess the magnitude of risk involved in transporting and offloading oil, oil spill simulation studies play an important role. This paper describes a simulation of oil spill in coastal bay of Arabian Gulf where new developments are taking place using MIKE 21 model. The developments include a diesel based thermal power plant near Sir Baniyas Island, which is an ecological fragile area. Based on the project activity, two probable scenarios, one for diesel leak (250 m3/h) for 1 h and the other for instantaneous spill (500 m3) are considered. The MIKE 21 model was calibrated for hydrodynamics using measured field data followed by diesel-spill simulation to track its movement in the Arabian Gulf. The results for both leak and instantaneous spill indicate that spilled diesel will not move towards the Sir Banyas Island and more than 45% of the diesel will be evaporated within 48 h of oil spill. Based on the results, a clean up and contingency plan is proposed to mitigate the adverse impacts arising due to diesel spill in the study area.     

Analysis of heavy metal concentrations in sediments of selected estuaries of Malaysia—a statistical assessment

Statistical analysis of heavy metal concentrations in sediment was studied to understand the interrelationship between different parameters and also to identify probable source component in order to explain the pollution status of selected estuaries. Concentrations of heavy metals (Cu, Zn, Cd, Fe, Pb, Cr, Hg and Mn) were analyzed in sediments from Juru and Jejawi Estuaries in Malaysia with ten sampling points of each estuary. The results of multivariate statistical techniques showed that the two regions have different characteristics in terms of heavy metals selected and indicates that each region receives pollution from different sources. The results also showed that Fe, Mn, Cd, Hg, and Cu are responsible for large spatial variations explaining 51.15% of the total variance, whilst Zn and Pb explain only 18.93 of the total variance. This study illustrates the usefulness of multivariate statistical techniques for evaluation and interpretation of large complex data sets to get better information about the heavy metal concentrations and design of monitoring network.     

Evaluation of environmental impacts of Integrated Industrial Estate��Pantnagar through application of air and water quality indices

Large-scale industrialization, population inflow, and rapid urbanization coupled with unfavorable meteorological conditions often induce significant degradation of urban environment. In order to assess the extent of environmental impacts due to establishment of the Integrated Industrial Estate??Pantnagar (IIE-Pantnagar), ambient air and groundwater were monitored from June 2007 to May 2008. Collected baseline information was normalized and interpreted with the application of air (AQI) and water quality indices (WQI). Among the pre-identified air pollutants, suspended particulate matter was found to be the principal culprit to deteriorate ambient air quality, with a maximum annual concentration of 418.5 ??g/m³. Monthly average concentrations of respirable particulate matter (aerodynamic diameter < 10 ??m) also persist at a critical level with an annual maximum of 207.3 ??g/m³. A segmented linear function with maximum operator concept was used to compute AQI, and the developed index was found well suitable to demonstrate temporal variations of ambient air quality. The computed AQI value for the selected study region varied from moderate (97.0) to very poor pollution level (309.2) in respect to developed air quality standards. Furthermore, an integrated WQI was developed comprising 9 parameters, and among all the 10 pre-identified locations, the average groundwater quality was found acceptable in terms of Indian drinking water standards. The maximum WQI (70.6) was found at the Kichha Railway Station during summer months, revealing moderate pollution load. Industrial discharge from IIE-Pantnagar coupled with other industrial setup may hold responsible for such kind of degradation of water quality. In contrast, WQI computed at Rudrapur City demonstrate minimum (15.0?C22.1) pollution load. For 95% of the monitoring period, the computed WQI was found acceptable for all selected locations with few exceptions. The application of WQI to assess temporal variations in groundwater quality was therefore found satisfactory.     

Analysis of acidic components, heavy metals and PAHS of particulate in the Changwon–Masan area of Korea

This study is an analysis of the concentrations and components of heavy metals in PM_2.5 and the total suspended particulate (TSP) collected at a mechanical industrial complex (IC) site in Changwon and at a residential site in Masan, Korea. Particulate was collected during two sampling periods, from the late summer to the early fall and from the middle to late fall, at the IC site and one sampling period, from the middle fall to the early winter, at the residential site. PM_2.5 and TSP samples were taken by an annular denuder system and a hi-volume air sampler, respectively. The authors also identified the concentrations and components of heavy metals extracted from the PM_2.5 and TSP filters, the acidic components extracted from the PM_2.5 filters, and the polycyclic aromatic hydrocarbons (PAHs) extracted from polyurethane foam (PUF) plug. The average concentrations of the PM_2.5 collected at the IC and residential sites were very similar. Major sources of PM_2.5 at the study sites, however, were air emissions from vehicles and industry as well as emissions from residential heating and soil origins, respectively. The higher concentrations of the TSP at the IC site, as compared to those at the residential site, were due to either increased suspended dust from vehicle emissions or re-suspended road dust because of increased vehicle speeds near the IC site. Heavy metal concentrations in the TSPs were higher than those in the PM_2.5. The heavy metal concentrations in the PM_2.5 and TSP at the IC site with heavy traffic were substantially greater than those at the residential site. The concentrations of TSP and heavy metals and PAHs in PM during the period of the middle to late fall was much higher than those during the period of the late summer to early fall at the IC site. This is because of the difference in meteorological characteristics and energy uses between two periods. The residential site also showed higher concentrations of acidic anions while the IC site showed higher concentrations of acidic cation. Secondary aerosols or particulates, such as ammonium nitrate or ammonium nitrite, might have been important constituents of the PM_2.5 at the residential site. The PAHs in the TSP collected at the IC site was greatly affected by traffic and industry emissions consisting mostly of high molecular weight PAHs with two to four rings. PAHs in the TSP at the site, however, were affected by residential heating and air emissions from small chemical plants having higher concentrations of low molecular weight PAHs with five to six rings.     

“Emission game”: some applications of the theory of games to the problem of CO2 emission

If there are no doubts that we must reduce the total emission of carbon dioxide, then the problem of how much different countries should be allowed to contribute to this amount remains a serious one. We suggest this problem to be considered as a non-antagonistic game (in Germeier's sense). A game of this kind is called an “emission game”. Suppose that there are n independent actors (countries or regions), each of them releasing a certain amount of CO₂ per year (in carbon units) into the atmosphere, and that the emission would be reduced by each actor. Each actor has his own aim: to minimise the loss in the Gross Domestic Product (GDP) caused by the reduction of emissions. On the other hand, taking into account that it is impossible to estimate more or less precisely the impact of the climate change on GDP for each country today, a common strategy will be to reduce the climate change. Since one of the main leading factors in global warming is the greenhouse effect, then the common aim will be to reduce the sum of emissions. This is a typical conflict situation. How to resolve it? We can weigh the “egoistic” and “altruistic” criteria for each actor introducing the so-called “coefficients of egoism”. This coefficient is very large, if the actor uses a very egoistic strategy, and conversely, if the actor is a “super-altruist”, then the corresponding coefficient is very small. Using these coefficients we get the general solution of the game in a form of some Pareto's equilibrium. The solution is stable and efficient.     

Time trend of Butyl- and Phenyl-Tin contamination in organisms of the Lagoon of Venice (1999–2003)

In the period 1999-2003 a monitoring study on the accumulation of organotin compounds in edible organisms in the Lagoon of Venice was conducted. Butyl and Phenyl derivatives were determined in pooled samples of Mytilus galloprovincialis and Tapes spp. with the aims of assessing organotin contamination in the Lagoon of Venice in the period just preceding their ban in Europe, monitoring the concentrations in organisms with a high commercial use, evaluating a potential hazard for human health due to seafood and identifying the possible contamination sources. Sampling stations (up to 20) were distributed around the Lagoon and particularly concentrated in the area close to the town of Chioggia. Significantly higher (analysis of variance (ANOVA), p < 0.05) tributyltin (TBT) concentrations were found in mussels (from 38 +/- 8 to 6,666 +/- 1,333 microg kg(-1) d.w., as TBT(+)), than in clams (from 6 +/- 1 to 2,256 +/- 451 microg kg(-1) d.w., as TBT(+)). During the 3 years of the survey no increase in average concentrations of the butyltin compounds (tributyltin (TBT) + dibutyltin (DBT) + monobutyltin (MBT)) was observed (ANOVA, p > 0.05) in either species. Furthermore, by analyzing the entire data set, it is evident that most stations show analogous concentrations in the 3 years for both species, whereas few have anomalously higher concentrations. If organotin concentrations in specimens from some sites are compared with the Tolerable Average Residue Level, a possible risk for human health must be considered.     

Speciation of Trace Metals in Coastal Sediments of El-Mex Bay South Mediterranean Sea–West of Alexandria (Egypt)

Sediments of El-Mex Bay estuary on the southern Mediterranean Sea have been analyzed for trace metals after sediment fractionation by sequential leaching. A sequential extraction procedure was applied to identify forms of Mn, Cu, Cd, Cr, Zn and Fe. The five steps of the sequential extraction procedure partitioned metals into: CH₃COONH₄ extractable (F1); NaOAC carbonate extractable (F2); NH₂OH.HCl/CH₃COOH reducible extractable (F3); H₂O₂–HNO₃ organic extractable (F4) and NHO₃/HClO₄/HF acid soluble residue (F5). Extracted concentrations of trace metals analyzed after all five steps, were found to be (μg/g) for Mn: 1930.2, Cu: 165.3, Cd: 60.9, Cr: 386.3, Zn: 2351.3 and Fe: 10895. Most of elements were found in reducible fraction except Fe found in acid soluble residue, characterizing stable compounds in sediments. Labile (non-residual) fractions of trace elements (sum of the first four fractions) were analyzed because they are more bioavailable than the residual amount. Correlation analysis was used to understand and visualize the associations between the labile fractions of trace metals and certain forms, since Fe-and Mn-oxides play an important role in trace metals sorption within aquatic systems, especially within El-Mex Bay sediments that characterized by varying metal bioavailability.     

Status of Heavy Metals in Water and Bed Sediments of River Gomti – A Tributary of the Ganga River, India

The concentrations of cadmium, chromium, copper, iron, lead, manganese, nickel, and zinc in water and bed sediments of river Gomti have been studied in a fairly long stretch of 500 km from Neemsar to Jaunpur. Grab samples of water (October 2002–March 2003) and bed sediments (December 2002 and March 2003) were collected from 10 different locations following the standard methods. The river water and sediment samples were processed and analyzed for heavy metals viz., Cd, Cr, Cu, Fe, Pb, Mn, Ni, and Zn, and using ICP-AES. The heavy metals found in the river water were in the range: Cd (0.0001–0.0005 mg/L); Cr (0.0015–0.0688 mg/L); Cu (0.0013–0.0.0043 mg/L); Fe (0.0791–0.3190 mg/L); Mn (0.0038–0.0.0973 mg/L); Ni (0.0066–0.011 mg/L); Pb (0.0158–0.0276 mg/L); and Zn (0.0144–0.0298 mg/L) respectively. In the sediments the same were found in the range: Cd (0.70–7.90 g/g); Cr (6.105–20.595 g/g); Cu (3.735–35.68 g/g); Fe (5051.485–8291.485 g/g); Mn (134.915–320.45 g/g); Ni (13.905–37.370 g/g); Pb (21.25–92.15 g/g); and Zn (15.72–99.35 g/g) of dry weight respectively. Some physico-chemical parameters viz., pH, total solids, total dissolved solids, total suspended solids, dissolved oxygen, biological oxygen demand, chemical oxygen demand, hardness etc. were estimated as these have direct or indirect influence on the incidence, transport and speciation of the heavy metals. Based on the geoaccumulation indices, the Gomti river sediments from Neemsar to Jaunpur are considered to be unpolluted with respect to Cr, Cu, Fe, Mn, and Zn. It is unpolluted to moderately polluted with Pb. In case of Cd it varies from moderately polluted to highly polluted. As far as Ni is concerned the sediment is very highly polluted at Barabanki and Jaunpur D/s. No correlation was found between enrichment factor and geoaccumulation index.     

Design and assembly of an experimental laboratory for the study of atmosphere–plant interactions in the system of fumigation chambers

A 5-day biochemical oxygen demand (BOD(5)) test has been used as the standard measurement of organic pollution in rivers worldwide. However, it may be argued that BOD is not a sufficient indicator of organic pollution when nitrogenous biochemical oxygen demand (NBOD) is present in water samples. In this study, BOD, NBOD, and carbonaceous biochemical oxygen demand (CBOD) of treated sewage effluent (TSE) were measured near at the discharge outlet of 3 sewage treatment plants (STPs) in Sakai, Itachi, and Kashio rivers in Central Japan. Additional measurements were conducted at one point upstream and two points downstream from the STP discharge points in the rivers. It was estimated that NBOD values in the TSE of Sakai River, Kashio River and Itachi River accounted for 54%, 69% and 18% of their BOD values, respectively. Respective NH4+ and NO2- concentrations were positively correlated with those of NBOD values in Sakai, Itachi, and Kashio rivers. The BOD loads from the TSE were estimated to be 2.2, 5.7, and 1.2 times higher than the CBOD loads in the Sakai, Itachi, and Kashio rivers, respectively. The variation of the portion of NBOD values of each TSE, as well as the ratios of CBOD to BOD loads, was attributed to the difference in each STP system. Consequently, the NH4+ and NO2- of TSE led to the increase of NBOD in the Sakai River basin.     

Numerical Modeling of Flow Fields and Dispersion of Passive Pollutants in the Vicinity of the Temelín Nuclear Power Plant

This study deals with numerical simulation of flow fields and dispersion of model passive admixtures in the planetary boundary layer in a 10 × 10 km square area, centered on the Czech Republic’s Temelín Nuclear Power Plant. Numerical calculations of three-dimensional flow fields with eight basic wind directions given for the inlet boundary of the computational domain are performed using the FLUENT CFD code with the standard k – ε turbulence model. The resultant modeling of the flow fields provides information as to probable local directions and velocities of flow vectors on a horizontal scale of 100 m, which are consistent with the data given for the boundaries of the calculation area in the framework of a scale of 10 km. The modeled flow fields generate the input data for related Lagrangian simulation of the ground concentration and deposition fields of passive particles assumedly emitted at the site of the Temelín plant. Simulated plumes describe eight cases of potential ground-level distribution of model passive admixtures in the area.     

Monitoring the quality of groundwater on the bank of Uyyakondan channel of river Cauvery at Tiruchirappalli, Tamil Nadu??India

The groundwater quality on the banks of Uyyakondan channel of Cauvery at Tiruchirappalli was studied. Two groundwater samples were taken near the bank of the channel on both sides and the other two samples were taken nearly 0.5 km away from the channel at ten stations. The study was carried out every year over a period of 3 years from December 2001-December 2003. The samples were subjected to physico-chemical analysis. The results showed that most of the physico-chemical parameters were in higher concentrations at most of the groundwater stations.     

Determination of Fish Community Composition in the Untempered Regions of a Thermal Effluent Canal – The Efficacy of a Fixed Underwater Videography System

High flows and deep waters associated with thermal dischargecanals invoke safety concerns and preclude the use of conventional fish sampling methodologies. Despite these challenges, it is critical that assessments of thermal effectsfrom power generation do not rely solely on data collected in the plume, but also focus on fish living in the canal, particularly in regions above the zone of tempering influence. We deployed a fixed underwater videography apparatus to monitor the community composition and abundance patterns of fish in the Nanticoke thermal generating discharge canal on the north shore of Lake Erie from February 1, 1999 until July 31, 1999. We also compared the number of species observed using video to angling surveys, visual observations through the air/water interface and two modified netting procedures. Our results indicate that videography permitted the detectionof the most species and the highest number of individuals. Variable visibility was the largest limitation of this approach. The addition of infrared lighting for low light conditions and a series of cameras positioned at several depths would be a cost effective, safe, and efficient method ofassessing community structure and behaviour of fish in thermal discharge canals.     

A methodology for rapid assessment of the environmental status of the shallow aquifer of ��Tavoliere di Puglia�� (Southern Italy)

Anticipating the European Water Framework Directive (2000/60/EC), the Italian Government issued Legislative Decree n.152/99 which sets out rules for classifying the environmental status of national water bodies in order to achieve specific qualitative objectives by 2016. The most recent European Groundwater Directive (2006/118/EC), which was only recognized by Italy in early 2009 (Legislative Decree 30/09), requires such resources to be characterized from a qualitative standpoint and the risk of their being polluted by individual pollutants or groups of pollutants to be evaluated. This paper reports a simple methodology, based on easy-to-apply rules, for the rapid classification of groundwater, and the results of its application to the shallow aquifer of the plain of Tavoliere delle Puglie located in south Italy. Data collected during well-water monitoring campaigns carried out from 2002 to 2003 made it possible to assess the environmental status of the Tavoliere which, unfortunately, was found to be characterized by ??significant anthropic pressures on quality and/or quantity of groundwater and necessitating specific improvement actions??.     

Modelling of a Capillary Rise Height of Biochar by Modified Lucas–Washburn Equation

Environmental Modeling & Assessment - Lucas–Washburn equation is a fundamental expression which is used to describe capillary rise in porous materials according to average pore radius,...     

An Assessment of the Ecological Condition of Long Island Sound, 1990–1993

Data from the Environmental Protection Agency's (EPA) Environmental Monitoring and Assessment Program (EMAP) from 1990 to 1993 were used to assess the condition of the Long Island Sound (LIS) estuary. Ambient water, sediment and biota were collected during the summer months from 53 LIS stations using an unbiased sampling design. The design consists of two LIS subunits, LIS proper, and small estuaries (<2.6 km2) at the margins of the Sound. Selected indicators of condition included: benthic species composition, abundance and biomass; fish species composition and gross external pathology; sediment physical and chemical characterization and sediment toxicity; and water clarity and quality. Results of the four-year sampling indicated that 28(±11)% of the areal extent of LIS proper had a benthic index < zero (impacted) and 51(±12)% of the area of small estuaries was impacted. Analysis of the results of other indicators also shows that small estuaries were particularly affected. For example, 42(±10)% of the areal extent of small estuaries exhibited sediment toxicity, and significant chemical contamination was evident in 22% of the area of small estuaries. Low dissolved oxygen (D.O.) concentrations (<5 ppm), however, appeared to affect only the deeper open waters of western LIS. Approximately 48(±12)% of the areal extent of LIS proper documented exposure to at least moderate D.O. stress (<5 ppm). The overall results of this monitoring study indicate that significant anthropogenic impacts have occurred in LIS and that if remediation was to take place, specific localized sediment problems would need attention. Point source and non-point source nutrient inputs to the Sound, which are believed to be the primary causative factor for the observed hypoxic conditions, would also need attention.     

Assessment on Seasonal Variation of Groundwater Quality of Phreatic Aquifers – a River Basin System

Spatial distribution of pH, electrical conductivity (EC), total dissolved solids (TDS), fluoride and total iron content of ground water samples collected from the muvattupuzha river basin, Kerala, India, has been studied for pre monsoon and post monsoon periods of year 2001. Results showed the groundwater of the basin is acidic for which the pH values ranged between 5.5 and 8.0. Average EC was found to be less than 100 μS/cm, for most of the study region. The pre monsoon minimum and maximum TDS were found as 25.6 and 227.84 mg/L respectively, where as post monsoon values ranged between 16 and 162.56 mg/L. The relatively low EC and TDS values found both during the seasons in the lateritic terrain of the river basin signifies the lower residence time of ground water with the country rock. This makes the groundwater quality of this river basin as good. Pre monsoon season samples showed high total iron content than that during the post monsoon period. During the study period values of the fluoride contents were found to be within the permissible limits.     

Effects of urban sprawl on agricultural land: a case study of Kahramanmaraş, Turkey

The main objective of this study is to quantify areal loss of olive groves due to urban sprawl of the city of Kahramanmara?, Turkey. Spatial changes were analysed by interpreting the digitized data derived from a black–white monoscopic aerial photograph taken in 1985, panchromatic IKONOS image of 2000 and two pan-sharpened Quickbird images of 2004 and 2006. Data obtained revealed that the area of olive groves decreased by 25% from 460.55 ha in 1985 to 344.46 in 2006, while the number of parcels increased from 170 to 445. Of the total areal loss, 60% was due to building constructions, with the rest being due to clear-cut for new residential gardens composed of exotic plants, new buildings, or new roads. Rapid population growth, increased land prices due to urban expansion, and abandonment of agricultural practices to construction of multi-storey buildings were the main causes of the process that transformed the olive groves into urbanized areas. Results pointed to an urgent need to (1) revise the national and municipal land management practices, (2) balance the gap between the short- and long-term economic benefits that urban and community development plans ignore, and (3) monitor land-use changes periodically by using high resolution satellite images.     

Assessment of benthic changes during 20 years of monitoring the Mexican Salina Cruz Bay

In this work a non-parametric multivariate analysis was used to assess the impact of metals and organic compounds in the macro infaunal component of the mollusks benthic community using surface sediment data from several monitoring programs collected over 20 years in Salina Cruz Bay, Mexico. The data for benthic mollusks community characteristics (richness, abundance and diversity) were linked to multivariate environmental patterns, using the Alternating Conditional Expectations method to correlate the biological measurements of the mollusk community with the physicochemical properties of water and sediments. Mollusks community variation is related to environmental characteristics as well as lead content. Surface deposit feeders are increasing their relative density, while subsurface deposit feeders are decreasing with respect to time, these last are expected to be more related with sediment and more affected then by its quality. However gastropods with predatory carnivore as well as chemosymbiotic deposit feeder bivalves have maintained their relative densities along time.