ASSESSMENT OF POTENTIAL ATMOSPHERIC TRANSPORT AND DEPOSITION PATTERNS DUE TO RUSSIAN PACIFIC FLEET OPERATIONS

A probabilistic analysis of atmospheric transport and deposition patterns from two nuclear risk sites-Kamchatka and Vladivostok-situated in the Russian Far East to countries and geographical regions of interest (Japan, China, North and South Koreas, territories of the Russian Far East, State of Alaska, and Aleutian Chain Islands, US) was performed. The main questions addressed were the following: Which geographical territories are at the highest risk from hypothetical releases at these sites? What are the probabilities for radionuclide atmospheric transport and deposition on different neighboring countries in case of accidents at the sites? For analysis, several research tools developed within the Arctic Risk Project were applied: (1) isentropic trajectory model to calculate a multiyear dataset of 5-day forward trajectories that originated over the site locations at various altitudes; (2) DERMA long-range transport model to simulate 5-day atmospheric transport, dispersion, and deposition of 137Cs for 1-day release (at the rate of 10(10) Bq/s); and (3) a set of statistical methods (including exploratory, cluster, and probability fields analyses) for evaluation of trajectory and dispersion modeling results. The possible impact (on annual, seasonal, and monthly basis) of selected risk sites on neighboring geographical regions is evaluated using a set of various indicators. For trajectory modeling, the indicators examined are: (1) atmospheric transport pathways, (2) airflow probability fields, (3) fast transport probability fields, (4) maximum possible impact zone, (5) maximum reaching distance, and (6) typical transport time fields. For dispersion modeling, the indicators examined are: (1) time integrated air concentration, (2) dry deposition, and (3) wet deposition. It was found for both sites that within the boundary layer the westerly flows are dominant throughout the year (more than 60% of the time), increasing with altitude of free troposphere up to 85% of the time. For the Kamchatka site, the US regions are at the highest risk with the average times of atmospheric transport ranging from 3 to 5.1 days and depositions of 10(-1) Bq/m2 and lower. For the Vladivostok site, the northern China and Japan regions are at the highest risk with the average times of atmospheric transport of 0.5 and 1.6 days, respectively, and depositions ranging from 10(0) to 10(+2) Bq/m2. The areas of maximum potentially impacted zones are 30 x 10(4) km2 and 25 x 10(4) km2 for the Kamchatka and Vladivostok sites, respectively.     

Transport of NO<Subscript>X</Subscript> Emissions from Sugarcane Fertilisation into the Great Barrier Reef Lagoon

The Great Barrier Reef World Heritage Area contains highly sensitive ecosystems that are threatened by the effects of anthropogenic activity including eutrophication. The nearby sugarcane plantations of tropical north Queensland are fertilised annually and there has been ongoing concern about the magnitude of the loss of applied nitrogen to the environment. Previous studies have considered the potential of rainwater run-off to deposit reactive nitrogen species into rivers and ultimately into the Great Barrier Reef Lagoon, but have neglected the possibility of transport via the atmosphere. This paper reports the results of a modelling study commissioned by Australia’s National Heritage Trust aimed at assessing whether or not atmospheric deposition of reactive nitrogen from Queensland’s sugarcane plantations posed a potential threat to the Great Barrier Reef Lagoon. Atmospheric dispersion modelling was undertaken using The Air Pollution Model, developed by Australia’s Commonwealth Scientific and Industrial Research Organisation. Despite the predominance of onshore southeasterly winds, the dispersion model results indicate that 9% of the time during the sugarcane fertilization season (in the modeled years 2001–2006) the meteorological conditions resulted in emissions from the coastal regions of north Queensland being transported out over the ocean around the Great Barrier Reef. The results suggest that there may be a greater efficiency for transport out over the reef during October than for November and December. For the 2 months that exhibited the greatest potential for transport of coastal pollution to the Great Barrier Reef, the modeled deposition of nitrogen oxides (NO_X) into the Great Barrier Reef lagoon was less than 1% of the total emissions from the sugarcane plantations, but was not zero. Our model has a simple chemical scheme that does not cover the full chemistry of all reactive nitrogen compounds and so the results are only indicative of the potential levels of deposition. Nevertheless, our study shows that small amounts of NO_X that originate from sugarcane fertilization may be transported and dry deposited into the Great Barrier Reef lagoon. Other pathways not included in the modeling scheme may provide a more efficient transport mechanism. Whilst modern practices for the application of fertilizer to sugarcane plantations have drastically reduced emissions, the potential efficiency of transport of pollutants via the atmosphere may be of concern for other more highly polluting agricultural industries.     

General plume dispersion model (GPDM) for point source emission

Gaussian-based dispersion models are widely used to estimate local pollution levels. The accuracy of such models depends on stability classification schemes as well as plume rise equations. A general plume dispersion model (GPDM) for a point source emission, based on Gaussian plume dispersion equation, was developed. The program complex was developed using Java and Visual basic tools. It has the flexibility of using five kinds of stability classification schemes, i.e., Lapse Rate, Pasquill–Gifford (PG), Turner, σ–θ and Richardson number. It also has the option of using two types of plume rise formulations – Briggs and Holland’s. The model, applicable for both rural and urban roughness conditions, uses meteorological and emission data as its input parameters, and calculates concentrations of pollutant at the center of each cell in a predefined grid area with respect to the given source location. Its performance was tested by comparing with 4-h average field data of continuous releases of SO₂ from Dadri thermal power plant (Uttar Pradesh, India). Results showed that the Turner scheme used with Holland’s equation gives the best outcome having a degree of agreement (d) of 0.522.     

Identifying the European Fossil Fuel Plumes in the Atmosphere Over the Northeast Atlantic Region Through Isotopic Observations and Numerical Modelling

As part of the Danish NEAREX project the origin and variability of anthropogenic atmospheric CO₂ over the Northeast Atlantic Region (NEAR) has been studied. The project consisted of a combination of experimental and modelling activities. Local volunteers operated CO₂ sampling stations, built at University of Copenhagen, for ¹⁴C analysis at four locations (East Denmark, Shetland Isles, Faroe Isles and Iceland). The samples were only collected during winter periods of south-easterly winds in an attempt to trace air enriched in fossil-fuel derived CO₂ due to combustion of fossil fuels within European countries. In order to study the transport and concentration fields over the region in detail, a three-dimensional Eulerian hemispheric air pollution model has been extended to include the main anthropogenic sources for atmospheric CO₂. During the project period (1998–2001) only a few episodes of transport from Central Europe towards NEAR arose, which makes the data set for the evaluation of the method sparse. The analysed samples indicate that the signal for fossil CO₂, as expected, is largest (up to 3.7±0.4% fossil CO₂) at the Danish location closest to the European emissions areas and much weaker (up to ∼1.5±0.6% fossil CO₂) at the most remote location. As the anthropogenic signal is weak in the clean atmosphere over NEAR these numbers will, however, be very sensitive to the assumed background ¹⁴CO₂ activity and the precision of the measurements. The model simulations include the interplay between the driving processes from the emission into the boundary layer and the following horizontal/vertical mixing and atmospheric transport and are used to analyse the meteorological conditions leading to the observed events of high fossil CO₂ over NEAR. This information about the history of the air masses is essential if an observed signal is to be utilised for identifying and quantifying sources for fossil CO₂.     

Smoke aerosols dispersion and transport from the 2013 New South Wales (Australia) bushfires

Environmental monitoring and modelling, especially in the regional context, has seen significant progress with the widely usage of satellite measurement in conjunction with local meteorological and air quality monitoring to understand the atmospheric dispersion and transport of air pollutants. This paper studies the application of these data and modelling tools to understand the environment effects of a major bushfire period in the state of New South Wales (NSW), Australia, in 2013. The bushfires have caused high pollution episodes at many sites in the greater Sydney metropolitan areas. The potential long-range transport of aerosols produced by bushfires to other region and states has been seen by regulators as a major concern. Using data and images collected from satellites, in addition to the results obtained from different simulations carried out using HYSPLIT trajectory model and a regional meteorological model called Conformal Cubic Atmospheric Model (CCAM), we were able to identify at least 2 days on which the smoke aerosols from bush fires in NSW has been transported at high altitude to the northern state of Queensland and the Coral Sea. As a result, widespread high particle concentration in South East Queensland including the Brisbane area, as measured by nearly all the air quality monitoring stations in this region, occurred on the day when the smoke aerosols intruded to lower altitude as indicated by the CALIOP (Cloud-Aerosol Lidar with Orthogonal Polarization) Lidar measurements on the CALIPSO (Cloud–Aerosol Lidar and Infrared Pathfinder Satellite Observation) satellite. The use of meteorological or air quality modelling to connect the ground-based measurements with satellite observations as shown in this study is useful to understand the pollutant transport due to bushfires and its impact on regional air quality.     

Spatial evaluation of the risk of groundwater quality degradation. A comparison between disjunctive kriging and geostatistical simulation

In some previous papers a probabilistic methodology was introduced to estimate a spatial index of risk of groundwater quality degradation, defined as the conditional probability of exceeding assigned thresholds of concentration of a generic chemical sampled in the studied water system. A crucial stage of this methodology was the use of geostatistical techniques to provide an estimation of the above-mentioned probability in a number of selected points by crossing spatial and temporal information. In this work, spatial risk values were obtained using alternatively stochastic conditional simulation and disjunctive kriging. A comparison between the resulting two sets of spatial risks, based on global and local statistical tests, showed that they do not come from the same statistical population and, consequently, they cannot be viewed as equivalent in a statistical sense. At a first glance, geostatistical conditional simulation may appear to represent the spatial variability of the phenomenon more effectively, as the latter tends to be smoothed by DK. However, a close examination of real case study results suggests that disjunctive kriging is more effective than simulation in estimating the spatial risk of groundwater quality degradation. In the study case, the potentially ‘harmful event’ considered, threatening a natural ‘vulnerable groundwater system,’ is fertilizer and manure application.     

Multi-route risk assessment from trihalomethanes in drinking water supplies

The USA is entering an era of energy diversity, and increasing nuclear capacity and concerns focus on accidents, security, waste, and pollution. Physical buffers that separate outsiders from nuclear facilities often support important natural ecosystems but may contain contaminants. The US Nuclear Regulatory Commission (NRC) licenses nuclear reactors; the applicant provides environmental assessments that serve as the basis for Environmental Impact Statements developed by NRC. We provide a template for the types of information needed for safe siting of nuclear facilities with buffers in three categories: ecological, fate and transport, and human health information that can be used for risk evaluations. Each item on the lists is an indicator for evaluation, and individual indicators can be selected for specific region. Ecological information needs include biodiversity (species, populations, communities) and structure and functioning of ecosystems, habitats, and landscapes, in addition to common, abundant, and unique species and endangered and rare ones. The key variables of fate and transport are sources of release for radionuclides and other chemicals, nature of releases (atmospheric vapors, subsurface liquids), features, and properties of environmental media (wind speed, direction and atmospheric stability, hydraulic gradient, hydraulic conductivity, groundwater chemistry). Human health aspects include receptor populations (demography, density, dispersion, and distance), potential pathways (drinking water sources, gardening, fishing), and exposure opportunities (lifestyle activities). For each of the three types of information needs, we expect that only a few of the indicators will be applicable to a particular site and that stakeholders should agree on a site-specific suite.     

Design of an Air-Quality Surveillance System for Buenos Aires City Integrated by a NO x Monitoring Network and Atmospheric Dispersion Models

This paper presents an air-quality surveillance system designed to detect the occurrence of air pollutant concentrations greater than a reference level in an urban area. The system is integrated by an air-quality monitoring network and atmospheric dispersion models simulations. An objective methodology to design an urban air-quality monitoring network is proposed. This methodology is based on the analysis of air-quality modelling results. The procedure is applied to design an air-quality monitoring network to control NO _x concentration levels in Buenos Aires City. Results indicate that six monitors will detect the occurrence of concentration greater than the air-quality guidelines with an efficiency of about 67%. Once a violation is detected, results of atmospheric dispersion models will help in the determination of affected areas. Four possible examples are included to illustrate the assistance that the results of atmospheric dispersion models can bring to a better estimation of possible affected areas in the city. Combining these results with the last census data, an estimation of the inhabitants possibly exposed is obtained.     

Environmental Exposure Assessment for Emergency Response in a Nuclear Power Plant Using an Integrated Source Term and 3D Numerical Model

Nuclear power plants are normally assumed to be safe when their radiation impact in all operational states is kept at a reasonably low level. However, accidentally released radioactive substances and ionizing radiation may lead to a situation that cannot maintain the regulatory prescribed dose limits for internal and external exposure of the personnel and population. Nuclear emergency preparedness and response in nuclear or radiological events have been of concern recently in international communities. Nuclear power plants may need to provide essential information regarding possible scenarios of accidental releases that might have short-term detrimental effects and long-term risks in nearby populated regions. This paper presents a synergistic integration of a source term model and a three-dimensional, time-dependent, numerical model (i.e., HOTMAC/RAPTAD), which was applied to simulate a specific scenario in which a vapor cloud was accidentally released from Maanshan (i.e., the third nuclear power plant) in South Taiwan. It aims at dealing with middle-range risk assessment for nuclear emergency preparedness and response. The solutions of such an integrated modeling platform can be found with numerical analyses that describe the processes of radionuclide generation, transport, decay, and deposition, giving the final risk assessment in a neighboring coastal city—Kaohsiung, South Taiwan. In addition, sensitivity analyses were performed to evaluate the internal consistency of model parameters, which further support the application potentials. Such a modeling technique is valuable because it can characterize the fate and transport of radioactive nuclides over the long term. The case study in South Taiwan uniquely demonstrates the feasibility and significance of such model integration.     

The lichen transplant methodology in the source apportionment of metal deposition around a copper smelter in the former mining town of Karabash, Russia

The lichen transplant monitoring methodology has been tested for source apportionment of metal deposition around the Cu smelter and former mining town of Karabash. Transplants of the lichen Hypogymnia physodes (L.) Nyl., collected from a ‘control’ site in July 2001, were set up at 10 stations along a 60 km NE–SW transect centred on Karabash. Samples were collected after 2 and 3 month monitoring periods and analysed using established wet-chemical techniques. The sources of particulate investigated were the smelter blast furnace and converter, floatation tailings, metallurgical slags, local road dusts, top soils and ambient airborne total suspended particulate. From multi-element least-squares modelling the blast furnace was the main source of particulate in transplants close to the smelter (<10 km). Particulate from the converter, with relatively high Pb and Zn, was found to be more widely dispersed, being finer-grained and so having a longer atmospheric residence time. Ambient airborne particulate, sampled in Karabash town using air-pump apparatus, was almost entirely derived from the converter, very different to the lichen transplants from the same area which mainly contained blast furnace particulate. It is proposed that lichens close to the smelter mainly trapped larger blast furnace-derived particulate as they have a low capture efficiency for smaller (converter) particles. The study demonstrates the utility of lichen transplants for monitoring atmospheric deposition and highlights the caution required in their use to assess ambient air quality in human health studies.