Relationship between landscape characteristics and surface water quality

The effects of landscape characteristics on surface water quality were evaluated in terms of land-use condition, soil type and slope. The case area, the Chichiawan stream in the Wulin catchment in Taiwan, is Formosan landlocked salmon's natural habitat. Due to the agriculture behavior and mankind's activities, the water and environmental quality has gradually worsened. This study applied WinVAST model to predict hydrological responses and non-point source pollution (NPSP) exports in the Wulin catchment. The land-use condition and the slope of land surface in a catchment are major effect factors for watershed responses, including flows and pollutant exports. This work discussed the possible variation of watershed responses induced by the change of land-use condition, soil type and slope, etc. The results show that hydrological responses are highly relative to the value of Curve Number (CN); Pollutant exports have large relation to the average slope of the land surface in the Wulin catchment.     

Application of integrated GIS and multimedia modeling on NPS pollution evaluation

In Taiwan, nonpoint source (NPS) pollution is one of the major causes of the impairment of surface waters. I-Liao Creek, located in southern Taiwan, flows approximately 90 km and drains toward the Kaoping River. Field investigation results indicate that NPS pollution from agricultural activities is one of the main water pollution sources in the I-Liao Creek Basin. Assessing the potential of NPS pollution to assist in the planning of best management practice (BMP) is significant for improving pollution prevention and control in the I-Liao Creek Basin. In this study, land use identification in the I-Liao Creek Basin was performed by properly integrating the skills of geographic information system (GIS) and global positioning system (GPS). In this analysis, 35 types of land use patterns in the watershed area of the basin are classified with the aid of Erdas Imagine process system and ArcView GIS system. Results indicate that betel palm farms, orchard farms, and tea gardens dominate the farmland areas in the basin, and are scattered around on both sides of the river corridor. An integrated watershed management model (IWMM) was applied for simulating the water quality and evaluating NPS pollutant loads to the I-Liao Creek. The model was calibrated and verified with collected water quality and soil data, and was used to investigate potential NPS pollution management plans. Simulated results indicate that NPS pollution has significant contributions to the nutrient loads to the I-Liao Creek during the wet season. Results also reveal that NPS pollution plays an important role in the deterioration of downstream water quality and caused significant increase in nutrient loads into the basin's water bodies. Simulated results show that source control, land use management, and grassy buffer strip are applicable and feasible BMPs for NPS nutrient loads reduction. GIS system is an important method for land use identification and waste load estimation in the basin. Linking the information of land utilization with the NPS pollution simulation model may further provide essential information of potential NPS pollution for all subregions in the river basin. Results and experience obtained from this study will be helpful in designing the watershed management and NPS pollution control strategies for other similar river basins.     

Critical Sampling Points Methodology: Case Studies of Geographically Diverse Watersheds

Only with a properly designed water quality monitoring network can data be collected that can lead to accurate information extraction. One of the main components of water quality monitoring network design is the allocation of sampling locations. For this purpose, a design methodology, called critical sampling points (CSP), has been developed for the determination of the critical sampling locations in small, rural watersheds with regard to total phosphorus (TP) load pollution. It considers hydrologic, topographic, soil, vegetative, and land use factors. The objective of the monitoring network design in this methodology is to identify the stream locations which receive the greatest TP loads from the upstream portions of a watershed. The CSP methodology has been translated into a model, called water quality monitoring station analysis (WQMSA), which integrates a geographic information system (GIS) for the handling of the spatial aspect of the data, a hydrologic/water quality simulation model for TP load estimation, and fuzzy logic for improved input data representation. In addition, the methodology was purposely designed to be useful in diverse rural watersheds, independent of geographic location. Three watershed case studies in Pennsylvania, Amazonian Ecuador, and central Chile were examined. Each case study offered a different degree of data availability. It was demonstrated that the developed methodology could be successfully used in all three case studies. The case studies suggest that the CSP methodology, in form of the WQMSA model, has potential in applications world-wide.     

Modeling of non-point source pollution in a Mediterranean drainage basin

SWAT ver. 2000 was used to predict hydrographs, and sediment, nitrate and total phosphorus loadings from a 1349 km² mountainous/agricultural watershed in Northern Greece. The model was calibrated and verified using continuous meteorological data from eight stations within the drainage area, and runoff, sediment and nutrient concentrations measured at nine stations located within the main tributaries of the watershed, for the time period from May 1st, 1998 to January 31st, 2000. Model validation methodology and resulting input parameters appropriate for Mediterranean drainage basins are presented. Predicted by the model hydrographs, sedimentographs and pollutographs are plotted against observed values and show good agreement. Model performance is evaluated using the root mean square error computation and scattergrams of predicted versus observed data. The validated model is also used to test the effectiveness of three alternative cropping scenarios in reducing nutrient loadings from the agricultural part of the watershed. The study showed that this model, if properly validated, can be used effectively in testing management scenarios in Mediterranean drainage basins.     

Derivation of unit and flood hydrographs using a gis

A geographic information system (GIS) supporting a flood hydrograph prediction software package is described. The hydrograph prediction method is based on the convolution of excess rainfall with a synthetic unit hydrograph, derived by the Soil Conservation Service runoff curve number and a regional dimensionless unit hydrograph method, respectively. The GIS uses a raster method to store the following data: land use and land cover, soil type, rainfall intensity-frequency-duration statistics, runoff curve numbers (CN), regional dimensionless unit hydrograph, and regional lag-time relationship. The GIS has also the capability of computing a number of watershed and hydrologic parameters required for predictions, such as a watershed average rainfall and CN value, area, centroid, stream length etc. Most of the data for such computations are input from a digitizer. Substantial time and cost savings are possible once the data base has been created. Application of the system is illustrated by an example predicting flood frequency curves for selected watersheds in Alberta's Rocky Mountain foothills, Canada.     

A Spatially Explicit Model for Estimating Annual Average Loads of Nonpoint Source Nutrient at the Watershed Scale

The overloaded nonpoint source (NPS) nutrients in upper streams always result in the nutrient enrichment at lakes and estuaries downstream. As NPS pollution has become a serious environmental concern in watershed management, the information about nutrient output distribution across a watershed has been critical in the designing of regional development policies. But existing watershed evaluation models often encounter difficulties in application because of their complicated structures and strict requirements for the input data. In this paper, a spatially explicit and process-based model, Integrated Grid’s Exporting and Delivery model, was introduced to estimate annual in-stream nutrient levels. Each grid cell in this model was regarded as having potentials of both exporting new nutrients and trapping nutrients passing by. The combined nutrient dynamics of a grid is mainly determined by the grid’s features in land use/land cover, soil drainage, and geomorphology. This simple-concept model was tested at some basins in north Georgia in the USA. Stations in one basin were used to calibrate the model. Then an external validation was employed by applying the calibrated model to stations in the other neighbor basins. Model evaluation statistics implied the model’s validity and good performance in estimating the annual NPS nutrients’ fluxes at the watershed scale. This study also provides a promising prospect that in-stream annual nutrient loads can be accurately estimated from a few public available datasets.     

A water quality monitoring network design methodology for the selection of critical sampling points: Part II

In order to resolve the spatial component of the design of a water quality monitoring network, a methodology has been developed to identify the critical sampling locations within a watershed. This methodology, called Critical Sampling Points (CSP), focuses on the contaminant total phosphorus (TP), and is applicable to small, predominantly agricultural-forested watersheds. The CSP methodology was translated into a model, called Water Quality Monitoring Station Analysis (WQMSA). It incorporates a geographic information system (GIS) for spatial analysis and data manipulation purposes, a hydrologic/water quality simulation model for estimating TP loads, and an artificial intelligence technology for improved input data representation. The model input data include a number of hydrologic, topographic, soils, vegetative, and land use factors. The model also includes an economic and logistics component. The validity of the CSP methodology was tested on a small experimental Pennsylvanian watershed, for which TP data from a number of single storm events were available for various sampling points within the watershed. A comparison of the ratios of observed to predicted TP loads between sampling points revealed that the model's results were promising.     

Spatial distribution and transport of heavy metals in soil, ponded-surface water and grass in a pb-contaminated watershed as related to land-use practices

The aim of this study was to investigate the spatial distribution of heavy metal in soil and evaluate the dissolution of metal from soil to ponded-surface water, leaching through soil profiles and metal uptake in grass as related to different land-use practices. The data provided a scientific basis for best-management practices for land use in Khli Ti watershed. The watershed has a Pb-contamination problem from the previous operation of a Pb-ore concentrator and abandoned Zn–Pb mine. Sampling sites were selected from a land-use map, with land-use types falling into the following four categories: forest, agricultural land, residential area and road. Soil, ponded-surface water, grass samples and soil profiles were collected. The study related soil characteristics from different land-use practices and locations with observed metal concentrations in ponded-surface water and soil. High enrichment factors of Pb and As in soil were found. Partitioning coefficient, K_d values were in the order: Cr > Pb > Ni > Cu > Cd > Zn. Soil disturbance from land-use activities including tillage and traffic increased leaching of trace metal from soils. Pb in soil was significantly taken up by grass even though the Transfer Factor, TF values were rather low. Agricultural activities in the watershed must be limited. Moreover, land encroachments in the upper and middle part of the watershed which have high potential of Pb must be strictly controlled in order to reduce the Pb contamination from non-point sources.     

Soil disturbance/restoration effects on stream sediment loading in the Tahoe Basin—detection monitoring

Quantifying the relative impacts of soil restoration or disturbance on watershed daily sediment and nutrients loads is essential towards assessing the actual costs/benefits of the land management. Such quantification requires stream monitoring programs capable of detecting changes in land-use or soil functional and erosive area “connectivity” conditions across the watershed. Previously, use of a local-scale, field-data based runoff and erosion model for three Lake Tahoe west-shore watersheds as a detection monitoring “proof of concept” suggested that analyses of midrange average daily flows can reveal sediment load reductions of relatively small watershed fractional areas (～5 %) of restored soil function within a few years of treatment. Developing such an effective stream monitoring program is considered for tributaries on the west shore of the Lake Tahoe Basin using continuous (15-min) stream monitoring information from Ward (2,521 ha), Blackwood (2,886 ha), and the Homewood (260 ha, HMR) Creek watersheds. The continuous total suspended sediment (TSS) and discharge monitoring confirmed the hysteretic TSS concentration—flowrate relationship associated with the daily and seasonal spring snowmelt hydrographs at all three creeks. Using the complete dataset, daily loads estimated from 1-h sampling periods during the day indicated that the optimal sampling hours were in the afternoon during the rising limb of the spring snowmelt hydrograph, an observation likely to apply across the Sierra Nevada and other snowmelt driven watersheds. Measured rising limb sediment loads were used to determine if soils restoration efforts (e.g., dirt road removal, ski run rehabilitation) at the HMR creek watershed reduced sediment loads between 2010 and 2011. A nearly 1.5-fold decrease in sediment yields (kg/ha per m³/s flow) was found suggesting that this focused monitoring approach may be useful towards development of TMDL “crediting” tools. Further monitoring is needed to verify these observations and confirm the value of this approach.     

AgInput: An Agricultural Nutrient and Pesticide Source Model

Agriculture can be a major nonpoint source (NPS) of nutrient and pesticide contamination in the environment. Available databases do not provide accurate and dynamic data on fertilizer and pesticide application, which limits the ability of complex watershed models to simulate contaminant loads into impaired water bodies. A model for estimating agricultural nutrient and pesticide input for watershed modeling has been developed. Climate, soils, and major agricultural operations are considered within the model, so that it can be adapted to any watershed or subregion within a watershed. The timing of the agricultural operations is a function of the weather data, providing realistic results at daily, monthly, or annual application rates. The model also predicts irrigation demand and biomass production, which can be used to calibrate the model. Model output can be used in any watershed model that considers agricultural land uses. Two case studies were evaluated, using grape vineyards in the Napa River and strawberry production in Newport Bay as examples. The predicted time to maturity corresponded well with actual data. Irrigation and fertilizer needs were very sensitive to weather input. Although the model can generate weather from long-term averages, the simulated results are best when at least observed precipitation and temperature are provided, to capture extreme events. The model has data for 98 crops and 126 pesticides, based on the California Department of Pesticide Regulation database. The databases are easily modifiable by the user to adapt them to local conditions. The output from AgInput is much needed for watershed modeling and for development of total maximum daily loads (TMDLs), based on realistic targets of irrigation, nutrient, and pesticide inputs. The model is available for free download at .