Comparison of SFE with Soxhlet in the analyses of PCDD/PCDFs and PCBs in sediment

The efficiency of supercritical fluid extraction (SFE) for the isolation of polychlorinated biphenyls (PCBs), dibenzo-p-dioxins (PCDD) and dibenzofurans (PCDF) from sediments was investigated by comparing SFE with Soxhlet. Five sediments obtained from an international interlaboratory study were used as a test material. SFE was performed with an automatic system where extracted analytes were collected by solid-phase trapping using carbon mixed with Celite as an adsorbent. For the first time, SFE of the most toxic PCBs, coplanar PCBs, was studied with real sediment samples. The majority of PCBs investigated, a total of 38 congeners from tri- to decachlorinated, were quantitatively extracted from sediment by SFE with pure CO2 at pressure 400 atm and temperature 100 degrees C. Under these conditions a successful extraction was obtained also for PCDD/PCDFs except for hepta- and octachlorinated congeners. Copper powder added to the sediment efficiently prevented the transfer of sulfur from the sample during SFE. The TEQs of both PCDD/PCDFs and PCBs obtained by SFE corresponded well with those obtained by the Soxhlet-based method. The reproducibility of SFE was high for both groups.     

Geochemical characteristics of inorganic sulfur in Shijing River, South China

Different inorganic sulfur species distributed in overlying water, pore water and sediment in a heavily polluted river were determined. The concentrations of S(2-) and SO(4)(2-) in the overlying water were much more than those in the pore water. This result perhaps indicates the S(2-) was mainly from discharged wastewater, not from sediment resuspension. In the sediments, acid-volatile sulfide, chromium(ii)-reducible sulfide, and elemental sulfur were determined by a modified diffusion method. The results indicate that acid-volatile sulfide was the dominant component of the reduced inorganic sulfur, making up about 62% of the total reduced inorganic sulfur.     

Occupational exposure to rubber vulcanization products during repair of rubber conveyor belts in a brown coal mine

Several hundred chemical compounds were found in workroom environments in the rubber industry, but most of the published exposure data relate to the production of tyres; information from the "non-tyre" sections are very limited, if any. This study was carried out to identify chemical substances and measure their air concentrations in the repair shop of a brown coal mine in which damaged rubber conveyor belts were repaired. GC-MS and HPLC analysis of stationary air samples resulted in identification of aliphatic and aromatic hydrocarbons to C12, PAHs, alcohols, phenols, ketones, heterocyclic nitrogen and sulfur compounds. Quantitative evaluation of occupational exposure included determination of organic compound vapours collected on charcoal (GC-MSD), polycyclic aromatic hydrocarbons (HPLC), N-nitrosoamines and other amines (GC-NPD) and DNPH derivatives of aldehydes (HPLC) in the breathing zone of workers representing all job titles. The concentrations of investigated compounds were very low. Carcinogenic substances: N-nitrosoamines, benzene, PAHs were not present in workroom air in concentrations exceeding limits of detection of the analytical methods being applied; concentrations of methylisobutylketone, tetrachloroethylene, naphtha, aromatic hydrocarbons, phthalates and aldehydes were much lower than the respective occupational exposure limit values. The results indicate much lower exposure than that reported in the production of tyres and other fabricated rubber products.     

Stability and storage problems in organotin speciation in environmental samples

The stability of both tributyltin (TBT) and triphenyltin (TPT) in water, sediment, oysters and cockles was studied over a period of 18 months using several storage conditions. Butyltins were stable in unacidified sea-water stored in polycarbonate bottles in the dark at 4 degrees C for 7 months, but half of the TBT concentration was lost after 540 d. A comparable preservation time was achieved for butyltins stored on C18 cartridges at room temperature. However, phenyltins extracted from sea-water were stable for only 60 d stored on cartridges and even more pronounced losses (about 90% after 540 d) occurred when they were stored in either polycarbonate or Pyrex glass bottles. Losses of organotins were observed in sediments after air drying and pasteurization treatments using a freeze-dried sediment as a comparator, whereas both butyltin and phenyltin species remained stable in sediments stored at -20 degrees C for the 18 months tested, irrespective of the treatment used for stabilization. Air drying followed by pasteurization was shown to be superior to other treatments for the stabilization of organotin compounds in sediments stored at higher temperatures, but 30% of TBT was lost after 540 d at 25 degrees C. Finally, butyltins were stable in both frozen cockles and oysters in the dark over a 7 month period and in freeze-dried samples stored at 4 degrees C for 5 months, but TBT losses of about 70% were observed after 540 d.     

Patterns and levels of halogenated volatile compounds in Portuguese surface waters

The present study focused on monitoring the concentration of 14 halogenated volatile organic compounds in surface waters, including sea, estuarine, river water and industrial effluents in order to determine the most ubiquitous compounds and their concentration levels, which were used to establish their geographical and temporal distribution. EPA Method 502, based on purge and trap techniques, was used. In this method volatile organic pollutants are extracted (purged) from the water sample by bubbling inert gas through the aqueous sample. Purged sample components are trapped in a cartridge containing the polymeric sorbent Tenax and, thereafter, the cartridge is heated and backflushed with helium to desorb the trapped sample components directly into a gas chromatograph with electron capture detector (GC-ECD). The linearity range of the method varied from 0.1 to 4 microg L(-1) with a limit of detection at the low microg L(-1) level. The present study consisted of a monthly monitoring of 46 points throughout Portugal, during 14 months. Chloroform was found in 50% of the samples analyzed, its presence being correlated to both agricultural and industrial activities. Other compounds detected were tetrachloroethylene, trichloroethylene, carbon tetrachloride and 1,2,4 trichlorobenzene, which were present in 10-20% of the samples at concentrations up to 18 microg L(-1). 1,1,2,2-Tetrachloroethane and its degradation product 1,1,2-trichloroethane were found in 5% of the samples, the levels of the latter being higher than those of the parent compound in most samples. Sporadic high concentrations of some volatile halogenated organic compounds were attributed to local uses as solvents.     

Phosphorous speciation in surface sediments of the Cochin estuary

Sequential chemical extraction using chelating agents were used to study the P dynamics and its bioavailability along the surface sediments of the Cochin estuary (southwest coast of India). Sediments were analyzed for major P species (iron bound P, calcium bound P, acid soluble organic P, alkali soluble organic P and residual organic P), Fe, Ca, total carbon, organic carbon, total nitrogen and total sulfur contents. An abrupt increase in the concentration of dissolved inorganic P with increasing salinity was observed in the study region. Iron-bound P exhibited a distinct seasonal pattern with maximum values in the monsoon season when fresh water condition was prevailed in the estuary. As salinity increased, the percentage of iron-bound P decreased, while that of calcium-bound P and total sedimentary sulfur increased. C/P and N/P ratios were low which indicate that large amounts of organic matter enriched with P tend to accumulate in surface sediments. The high organic P contribution in the sedimentary P pool may indicate high organic matter load with incomplete mineralization, as well as comparatively greater percentage of humic substance and resistant organic compounds. Principal component analysis is employed to find the possible processes influencing the speciation of P in the study region and indicate the following processes: (1) the spatial and seasonal variations of calcium bound P and acid soluble organic P was mainly controlled by sediment texture and organic carbon content, (2) sediment redox conditions control the distribution of iron bound P and (3) the terrigenous input of organic P is a significant processes controlling total P content in surface sediments. The bioavailable P was very high in the surface sediments which on an average accounts for 59 % in the pre-monsoon, 65 % in the monsoon and 53 % in the post-monsoon seasons. The surface sediments act as a potential internal source of P in the Cochin estuary.     

Relationships Between Toxicity and Concentrations of Chemical Contaminants in Sediments from Sydney Harbour, Australia, and Vicinity

Correlation analyses between measures of toxicity and concentrations of chemical contaminants were conducted for 103 surficial sediments from Sydney Harbour, Australia, and vicinity. Toxicity tests consisted of amphipod survival and reburial tests of whole sediments (Corophium colo), sea urchin fertilisation and larval development tests of pore waters (Heliocidaris tuberculata) and microbial bioluminescence (Microtox) tests of solvent extracts and pore waters. Toxicity in most tests correlated with concentrations of metallic contaminants, in particular, zinc, lead and copper. Organic contaminants did not correlate as significantly with toxicity. However, Heliocidaris tuberculata showed relationships with organochlorine compounds in samples with low to moderate metals contamination. Toxicity in the Microtox solvent extract test appeared to be primarily influenced by the presence of sulfur. This study has no precedent in Australia and the results support the validity of using local indigenous species in toxicity tests of field-collected sediments. This toxicity/chemistry dataset may be used in evaluations of sediment quality guidelines recently introduced to Australia.     

Historical changes of sediments and mollusk assemblages in the Gulf of Batabanó (Caribbean Sea) in the twentieth century

The first paleoecological reconstruction of the biogeochemical conditions of the Gulf of Batabanó, Caribbean Sea was performed from (210)Pb-dated sediment cores. Depth profiles of 20 major elements and trace metals, organic compounds, grain size, and mollusk assemblage composition were determined from 9 stations encompassing unconsolidated sediments in the gulf. Spatial heterogeneity was evident for the geochemistry of sediments and for the mollusk assemblage composition. Our reconstruction indicates that pollution is not a critical threat to the ecosystem, although a slight historical increase of lead enrichment factor was detected probably due to long-range atmospheric fallout. Mollusk assemblages were composed by 168 species belonging to 59 families and no temporal trends in the species diversity or assemblage composition were detected, suggesting no depletion of diversity or habitat loss. Other signals of habitat loss such as changes in organic budget or increase of fine sediment fraction were absent or weak. Nitrogen retained in sediments changed by <1% in the century, indicating no historical events of eutrophication or oligotrophication in the gulf. Historical decrease of fine sediment fraction in the eastern sector would be linked to modifications in sedimentation rate, land use, and/or particle transport from the shelf border; this also suggests that both sectors have different sedimentary dynamics. Although, on theoretical grounds, historical fishery may have caused deleterious ecosystem effects by overexploitation of spiny lobster stocks, no evidence of habitat degradation or loss, caused by fisheries, could be detected.     

Monitoring microbes in the Great Lakes

The concentrations of Cu, Pb, Zn, Cd, and Ni were measured in surface and core sediments to determine their distribution characteristics and toxicity in the sediments of Lake Chaohu. The results revealed that metal concentrations in the surface sediments had a tendency to increase from the estuarine mouth to the lake center. The distribution characteristics of the five target metals were similar along the sediment profiles at each site. Principal component analysis revealed that all of the measured variables were loaded in the same component, indicating that there was a strong relationship among these measured variables, which was confirmed by the correlation analysis. Two sets of sediment quality guidelines (SQGs): simultaneously extracted metal (SEM) and acid volatile sulfides (AVS) models (including ∑SEM/AVS, ∑SEM-AVS, and ∑SEM-AVS/ f (oc)) and threshold effect level and probable effect level values were used to predict the sediment toxicity. Comparison of the results obtained using these two sets of SQGs revealed that only a small portion of the entire set was identical, while the majority of the results were different and sometimes completely contradictory. These contradictory results would cause a great deal of trouble for environment managers. More accurate and universal SQGs must be developed for environmental researchers and local environmental managers and regulators.     

River evaluation using ecotoxicological and microbiological procedures

One of the many problems researchers and managers face is to try and interpret data collected from various river studies. There is an underlying awareness of the incompleteness of most data bases due to a variety of problems outside of those concerning sample processing.In this study we have attempted, by using the battery of tests approach (12 tests) and the examination of different types of samples such as water, Milli-Q water extracted sediments, and organic solvent extracted sediments, to explore the implication of spacial and temporal sampling programmes.The results obtained were not unexpected: there were spatial and temporal influences, sometimes so great that it would appear that you were examining samples from different parts of the country. However, data arising from solvent extracted sediments were found to be much less influenced by temporal sampling than by spatial variation. Another interesting and important observation was that sediment composition appeared to have no relationship to toxicant content.In this study, the first field application of the Mutatox test (genotoxicity) was carried out and it was found to be a very responsive test in all three types of samples. This test shows great promise as laboratory studies indicate it is sensitive to many of the chemicals which trigger the Ames test.     

Remobilization of polychlorinated biphenyls from sediment and its consequences for their transport in river waters

A laboratory experiment was performed to examine the remobilization of indicator polychlorinated biphenyls (iPCBs) from sediments and its results were applied to the real-world data for explaining the transport of PCBs in river. Seven PCB concentrations were determined in three series of model water–sediment systems (3 g of river sediment, three different volumes of distilled water (0.5, 0.25, and 0.15 ml), and 5 mg of biocide) after 11 days of incubation. Solid-phase extraction was used for separation of analytes from the aqueous phase and solvent extraction for isolation of analytes from the sediments, respectively. The extracts were analyzed for individual iPCB congeners using gas chromatography–mass spectrometry method. For each series of the experiment, the concentrations of PCBs in aqueous phase were similar. The average sediment/water partition coefficient value was 10⁴?l/kg. The solubility of individual PCB congeners in water did not influence the desorption of PCBs from the sediment. Although the dominant form of PCBs in a water–sediment system occurs as suspended and colloidal fractions, these compounds are transported mostly in a dissolved form. Suspended and colloidal matter is a major sink for PCBs in low-energy aquatic environments. In contrast, the dissolved PCBs are readily transported in running waters. The mobilization of PCBs from sediments to aqueous phase, with respect to their solubility in water, seems to be limited, thus reducing the risk of secondary pollution.     

Assessment of priority phenolic compounds in sediments from an extremely polluted coastal wetland (Lake Maryut, Egypt)

Although high concentrations of trace organic pollutants were recorded along the Egyptian Mediterranean Coast and its corresponding coastal wetlands, no published data are available for the levels of phenolic compounds. Thus, this work aimed to investigate the levels of phenolic compounds in sediments of a heavily polluted coastal wetland (Lake Maryut, Egypt). For that purpose, a method was optimized for the extraction and detection of chlorophenols, methylphenols, and nitrophenols in sediments using GC-MS. Sediments were extracted with 0.1 M NaOH/methanol by sonication. Cleanup of sediment extracts using liquid–liquid extraction and SPE was found important to remove most of the interfering co-extracts. The proposed analytical methodology was validated by analysis of matrix spikes. Detection limits were 0.063–0.694 μg/kg dw for sediments. Good recoveries (70–110%) and precision values (RSD?<?20%) were obtained from the fortification experiments at the parts per billion level in sediments. The method was applied to investigate the level of contamination with phenols in 19 sediment samples from Lake Maryut. Results revealed that higher concentrations were observed in the main basin (MB) of Lake Maryut affected by the discharge of effluents from a primary wastewater treatment plant, direct discharge of industrial effluents, domestic wastes, and agricultural effluents from Qalaa Drain (QD). Chlorophenols (CPs) were the major group detected in the lake sediments followed by methylphenols (MPs) and nitrophenols (NPs). CPs were dominated by 2-, 4-, and 3-chlorophenols. Concentrations of CPs were higher at the north and northwestern parts of the MB indicating the influence of industrial effluents discharged into the lake. On the other hand, higher concentrations of NPs were observed at the south and southwestern parts of the MB, which is subjected to the discharge of agricultural and domestic effluents via QD. Results of the risk assessment revealed that phenol, cresols, 2,4-dinitrophenol, 4-NP, 2-CP, 2,3,4,6-tetrachlorophenol and 2,4-dimethylphenol are contaminants of concern and that adverse ecological effects could possibly occur to benthic species from the exposure to these pollutants in Lake Maryut and thus phenols should be included in monitoring and pollution prevention programs in the Egyptian aquatic environment affected by anthropogenic activities.     

Characteristics of petroleum hydrocarbons in surficial sediments from the Songhuajiang River (China): spatial and temporal trends

This paper presents the spatial and temporal characteristics of petroleum hydrocarbons (PH) in surficial sediments from the Songhuajiang River using the method of petroleum chemical fingerprinting. Twenty-four surface sediment samples were collected at 17 sites along the river from upstream to downstream in flood season (August 2005) and icebound season (December 2005) and were analyzed for PH including n-alkanes (C(16)-C(33)), isoprenoid alkanes (pristane and phytane), and unresolved complex mixture (UCM). The concentration of PH varied from 22.64 to 91.45 μg g(?-1) dry sediment. n-alkanes with a carbon number from 16 to 33 were detected in all samples, and the UCM was the dominant composition for PH. The variability of the PH concentration was mostly influenced by external conditions, such as seasonal change and industrial area position, as well as internal sediment physicochemical properties, such as organic carbon and grain size. The concentration of hydrocarbons is higher in flood season than in icebound season and is higher upstream than downstream. The diagnostic ratios of specific hydrocarbons showed that the PH pollution comes from a combination of biogenic and petrogenic sources, and petrogenic input is dominant in icebound season relative to flood season. It also indicates that there is a clear terrigenous input of n-alkanes in flood season. Principal components analysis was used to study the composition and characteristics of PH in Songhuajiang River sediments and to assess the spatial and temporal distribution of their natural and anthropogenic sources.     

Sediments as a potential tool for assessment of sewage pollution in Barigüi River, Brazil

Sediments constitute a pollutant trap and have proven to be an efficient tool to identify environmental impacts. Sediments are considered a very important means to assess the level of contamination of water bodies because of their ability to accumulate metals and organic. The anthropogenic inputs of sewage, with or without prior treatment, in aquatic environments, affect the geochemical composition of sediment. In addition, the sediment adsorbs hydrophobic compounds found in feces, such as the fecal sterols. The granulometric and geochemical composition of the sediment of Barigüi River-Brazil was investigated. The results show that silt and clay dominate the granulometric composition of the sediments. The geochemical composition of sediments showed high concentrations of phosphorus and nitrogen. The Redfield ratios confirm the inputs of phosphorus and nitrogen. The TOC/N ratio was used to identify the source of pollution. N/TP ratios were found between 1.0 and 3.5. Clearly, an input of phosphorus, sewage is the most acceptable source, following the historic profile of the Barigüi River. High concentration of nitrogen phosphorus labels the area to be polluted by sewage. To confirm the sewage pollution, adsorbed fecal sterols in sediments were investigated. The concentration of total sterols was found between 0.86 and 304.58 μg g^???1. Two distinguished scenario was found, one severely polluted and another slightly polluted. The highest concentrations of total fecal sterols were associated with sediment whose geochemical composition showed higher levels of TOC, as well as higher proportions of silt and clay. Also, epicoprostanol, a coprostanol isomer, was used as an indicator of the level of treatment or age of the fecal matter because it is formed during the treatment of wastewater and sludge digestion. If the treatment of sludge takes a long time, epicoprostanol can form from cholesterol, and relative proportions of those compounds may be used as an indicator of the presence of untreated sewage in the sediments. The epicoprostanol was found in the range between 0.02 and 9.71 μg g^???1; concentration of up to 0.015 μg g^???1 represents situations where there is strong contamination by sewage. All sites investigated showed a concentration of epicoprostanol higher than the value adopted as threshold. The lower concentration of epicoprostanol found for all sites is consistent with the high concentration found for coprostanol, and this is typical for untreated sewage.     

The distribution and composition of hydrocarbons in sediments from the Fladen Ground, North Sea, an area of oil production

The distribution and composition of hydrocarbons in sediment from the Fladen Ground oilfield in the northern North Sea have been investigated. The total PAH concentrations (2- to 6-ring parent and alkylated PAHs, including the 16 US EPA PAHs) in sediments were relatively low (<100 microg kg(-1) dry weight). The PAH, the Forties crude and diesel oil equivalent concentrations were generally higher in sediment of fine grain size and higher organic carbon concentration. PAH distributions and concentration ratios indicated a predominantly pyrolytic input, being dominated by the heavier, more persistent, 5- and 6-ring compounds, and with a high proportion of parent PAHs. The n-alkane profiles of a number of the sediments contained small, high boiling point, UCMs, indicative of weathered oil arising from a limited petrogenic input. The geochemical biomarker profiles of the sediments that contained UCMs showed a small bisnorhopane peak and a high proportion of norhopane relative to hopane, indicating that there was contamination from both Middle Eastern and North Sea oils. Therefore contamination was not directly as a result of oil exploration activity in the area. The most likely source of petrogenic contamination was from general shipping activity.     

Evaluation of an Exposure Assay to Measure Uptake of Sediment Pah by Fish

The ecological risks of polynuclear aromatic hydrocarbons (PAH) in aquatic sediments will vary with both toxicity and bioavailability to aquatic biota. While there are standardized protocols to test the acute toxicity of sediment-borne compounds to aquatic invertebrates, there are none for assessing bioavailability to fish. We found that sediment-borne PAH caused an exposure-dependent induction of cytochrome P450 (CYP1A) enzymes in rainbow trout (Oncorhynchus mykiss) fingerlings exposed in semi-static 96 h bioassays, as shown by increased activity of ethoxyresorufin-o-deethylase (EROD). Assuming that PAH are taken up by trout due to partitioning from organic and inorganic constituents of sediments, we tested the effect of different test variables on bioaccumulation using induction as an index of exposure. EROD activity increased with exposure of fish to increasing volumes of sediments containing PAH, i.e., with increasing ratios of sediment to water. Uptake of single compounds from sandy sediments did not differ from uptake from clay or low organic (7% LOI — loss on ignition) sediments, but decreased when organic content was very high (58% LOI). Maximum induction was observed within 24~h of exposure and at 7.5^C relative to 15, 22, or 28^C. Storage and handling techniques had minor effects on sediment EROD induction potency. Absolute EROD activity was greater in white sucker (Catostomus commersoni) a benthic species, than in trout, a pelagic species. However, when basal (negative control) activity was accounted for, there was no difference in response between the species. Together, these experiments provide a basis for developing a standard protocol to test the bioavailability to fish of sediment-borne PAH.     

典型化工园区大气中挥发性有机物污染调查

对常州市某典型化工园区大气中挥发性有机物(VOCs)污染状况进行了调查。结果表明,该化工园区大气中检出挥发性有机物共有58种,组分有芳香烃、饱和烷烃、卤代烃、烯烃、醛酯类化合物及其他类;苯、甲苯、乙苯、二甲苯为主要挥发性有机污染物,质量浓度为1.0~194μg/m~3;均未超出参考标准的限值。背景点位和园区点位大气中主要ρ总(VOCs)在秋冬季最高,敏感点大气VOCs随季节变化也较为明显;园区T1和T2ρ总(VOCs)年均值高于敏感点位,背景点位年均值最低;园区点位除了汽车尾气排放之外,溶剂的挥发和生产工艺中污染物的排放也增加了大气中苯系物的浓度,同时也对敏感点位和对照点位的大气质量产生了一定的影响。     

Occurrence of orthophosphate monoesters in lake sediments: significance of myo- and scyllo-inositol hexakisphosphate

Orthophosphate monoesters often constitute a significant fraction of total phosphorus in lake sediments. The knowledge on the specific composition and recalcitrance of these compounds is however limited. The main aim was therefore to identify and quantify specific orthophosphate monoesters in sediment from 15 Danish lakes by solution (31)P NMR spectroscopy. The four most quantitatively important orthophosphate monoesters were myo-inositol hexakisphosphate (myo-IP(6)), scyllo-inositol hexakisphosphate (scyllo-IP(6)) α-glycerophosphate (α-GP) and β-glycerophosphate (β-GP). The compounds were identified in 9, 4, 8 and in all 15 lakes, respectively. In total these four components made up 46-100% of the orthophosphate monoester pool. The glycerophosphates (GPs) are most likely degradation products of phospholipids, created as an artifact by the alkaline extraction procedure used for (31)P NMR spectroscopy, while the inositol hexakisphosphates (IPs) are naturally occurring compounds. There was a significant positive correlation between myo-IP(6) and total aluminium in the sediment and a negative correlation between myo-IP(6) and lake water pH, suggesting that myo-IP(6) is stabilized in the sediment by adsorption at slightly acidic or neutral conditions. In three lakes, the depth distribution of the orthophosphate monoesters was investigated. The content of scyllo-IP(6) and myo-IP(6) was constant with sediment depth in two of the lakes while the content of myo-IP(6) decreased with depth in one of the lakes. In all cases the IPs seem to be preserved with sediment depth to a higher extent than the orthophosphate diesters and especially the GPs suggesting that IPs can be a sink for phosphorus in the lake ecosystem or at least delay P-recycling for years.     

Analytical approaches to the determination of phosphorus partitioning patterns in sediments

Three methods for phosphorus fractionation in sediments based on chemical extractions have been applied to fourteen aquatic sediment samples of different origin and characteristics. Two of the methods used different approaches to obtain the inorganic fractions. The Hieltjes and Lijklema procedure (HL) uses strong acids or bases, whereas the Golterman procedure (G) uses chelating reagents. The third one, the Standards, Measurements and Testing (SMT) protocol, was proposed in the frame of the SMT Programme (European Commission) which aimed to provide harmonisation and the validation of such methodologies. This harmonised procedure was also used for the certification of the extractable phosphorus contents in a sediment certified reference material (CRM BCR 684). Principal component analysis (PCA) was used to group sediments according to their composition and the three extraction methods were applied to the samples including CRM BCR 684. The data obtained show that there is some correlation between the results from the three methods when considering the organic and the residual fractions together. The SMT and the HL methods are the most comparable, whereas the G method, using a different type of reagent, yields different distribution patterns depending on sample composition. In relation to the inorganic phosphorus, the three methods give similar information, although the distribution between non-apatite and apatite fractions can be different.     

Assessment of benthic changes during 20 years of monitoring the Mexican Salina Cruz Bay

In this work a non-parametric multivariate analysis was used to assess the impact of metals and organic compounds in the macro infaunal component of the mollusks benthic community using surface sediment data from several monitoring programs collected over 20 years in Salina Cruz Bay, Mexico. The data for benthic mollusks community characteristics (richness, abundance and diversity) were linked to multivariate environmental patterns, using the Alternating Conditional Expectations method to correlate the biological measurements of the mollusk community with the physicochemical properties of water and sediments. Mollusks community variation is related to environmental characteristics as well as lead content. Surface deposit feeders are increasing their relative density, while subsurface deposit feeders are decreasing with respect to time, these last are expected to be more related with sediment and more affected then by its quality. However gastropods with predatory carnivore as well as chemosymbiotic deposit feeder bivalves have maintained their relative densities along time.