加速溶剂萃取-气相色谱-质谱法同时测定土壤中7种Aroclor系列多氯联苯

采用加速溶剂萃取,Florisil固相萃取小柱净化,GC-MS法同时测定土壤中7种多氯联苯(Aroclor 1016、1221、1232、1242、1248、1254、1260)的含量。建立了一种全新的Aroclor系列多氯联苯的定量测定方法,根据氯代联苯峰在单种Aroclor和7种Aroclor混合物中峰高比值(K)固定不变的原理,通过7种Aroclor混合物的标准曲线,计算得出各种Aroclor的标准曲线,测定样品中Aroclor的含量;采用建立多元一次方程组的方法,测定样品中多种不同浓度Aroclor的含量,大大提高了分析效率。7种Aroclor混合物和Aroclor1242、Aroclor1260的土壤加标样品回收率为90.5%~109%,RSD为0.96%~9.38%(n=5),均能满足分析准确度和精密度的要求。     

气相色谱法测定水体中多氯联苯Aroclor系列

采用液液萃取—气相色谱法(GC-ECD)测定水体中多氯联苯Aroclor系列Aroclor1016、Aroclor1221、Aroclor1232、Aroclor1242、Aroclor1248、Aroclor1254、Aroclor1260。样品经正己烷溶剂萃取,再经全自动样品浓缩仪(EVA)浓缩萃取液至1 mL,供气相色谱仪测定,外标法定量,加标回收率在75%~110%之间,检出限为0.1μg/L。该方法采用双塔双柱双检测器,排除了误检和其他物质的干扰,保证了分析结果的可靠性,方法简单、灵敏、准确。     

全二维气相色谱-飞行时间质谱法分离复杂体系中7种指示剂 多氯联苯

采用全二维气相色谱-飞行时间质谱法(GC×GC TOF-MS)分析了混标样品Aroclor 1260、Aroclor 1254、Aroclor 1242中的多氯联苯(PCBs)单体,考察了在复杂体系下对7种PCBs指示剂的分离能力。结果表明,与优化柱系统的分离效果相比,136种单体的混标样品中共分离出121种单体,7种指示剂经一维和二维的保留时间及质谱定性,在121种单体的2D斑点图中清晰可辨。全二维对于复杂体系的PCBs和指示剂的分离表明其强大的分离能力和对于检测复杂体系中指示剂的分辨能力,对该类物质的定性和定量检测具有重要意义。     

串联四极杆质谱(GC-QqQ-MS/MS)测定土壤中的有机氯农药和多氯联苯

建立了用加速溶剂萃取仪(ASE)萃取、凝胶渗透色谱(GPC)净化、气相色谱/串联四极杆质谱多反应监测、同时测定土壤中17种有机氯农药和19种多氯联苯的方法.加标浓度在3.3μg/kg时的平均回收率在79.6%～93.2%之间,相对标准偏差在2.9%～13.0%之间,定量限在0.01～0.51μg/kg之间.在检测土壤样品中的有机氯农药和多氯联苯残留方面,Gc-QqQ-MS/MS相对于气相色谱/电子捕获检测器(GC-ECD)和GC-MS的选择离子检测(SIM)模式具有非常明显的优势,尤其是在低浓度水平的定性和定量方面.     

超声波萃取- GC/MS法测定土壤中多氯联苯

建立了超声波萃取、氟罗里硅土柱净化、气相色谱/质谱联用选择离子扫描模式测定土壤样品中多氯联苯Arochlor系列的方法.方法线性良好,灵敏度高,RSD为9.5%～12.2%,加标回收率为65.0%～105%,标准土壤样品的测定结果也符合要求.     

自动在线监测仪测定地表水中19种挥发性有机物的适用性探讨

通过测定标准样品和实际样品,对自动在线监测仪测定地表水中19种挥发性有机物(VOCs)的适用性进行了探讨。结果表明,自动在线监测仪测定19种VOCs的检出限为0.02～0.11μg/L,相关系数 0.995,相对标准偏差为1.2%～3.6%(n=6),加标回收率为91.9%～102%,精密度和准确度良好,可以满足地表水痕量VOCs的测定需求。因干扰物的存在,在线仪器无法准确定性或定量某些目标物,特别是低沸点、出峰早的二氯甲烷和氯仿。从在线仪配置角度剖析了在线仪器测定不准确的原因,提出,通过测试复杂标准样品,建立备用色谱程序和建设超标留样系统,提升自动在线监测仪定性的准确性。     

三重四极杆质谱技术测定固体废弃物中多氯联苯

以二氯甲烷为萃取剂,采用快速溶剂萃取、凝胶渗透色谱净化、三重四极杆质谱技术测定固体废弃物中7种多氯联苯单体,选择十氯联苯为内标物,2,4,5,6-四氯间二甲苯为替代物。质谱采用MRM扫描,优化了目标物质保留时间、母离子和子离子质量数及碰撞能量等参数。方法在0.050 mg/L～2.00 mg/L范围内线性良好,7种多氯联苯单体的检出限为0.194 ng/g～0.355 ng/g(以称取30 g样品、定容至2.0 mL计),标准样品回收率多在60%～105%之间,空白加标样品测定值的相对标准偏差在8.6%～13.0%之间。     

生物组织样品中微量多环芳烃的测定

采用快速溶剂萃取法(ASE)提取生物组织中的有机组分,经硅胶、氧化铝、凝胶色谱法(GPC)等净化除干扰后,进行GC MS分析。本法采用选择离子监测(SIM)采集数据,内标法定量,对24种多环芳烃进行了测定,检出限达到0.002～0.005mg kg,经过复杂前处理过程的方法回收率为58%～77%,样品的标准偏差小于15%。     

水中松节油气相色谱的测定方法研究

研究建立了气相色谱和气-质联用法测定水中松节油的方法.用二氯甲烷萃取水样中的松节油,萃取后直接进行色谱分离分析,松节油的主要成分能有效分离,水中松节油的最低检测浓度气相色谱法为0.01mg/L,气-质联用法可达0.001mg/L;准确度好,两种测定方法的样品添加回收率在90.3%～115%之间;平行6次进行精密度试验,两种分析方法的相对标准差低于5.9%.结果表明,气相色谱法简便、快速、准确、重现性好,适合地表水中松节油的测定.选择离子气-质联用法可排除干扰,定量、定性更加准确可靠,适合复杂水样的分析.     

离子色谱法测定大气降水中的硫酸根和硝酸根离子

降水样品中的阴离子,经阴离子色谱柱交换分离,抑制型电导检测器检测,以保留时间定性,峰面积外标法定量,建立了离子色谱同时测定降水的硫酸根和硝酸根离子的分析方法。结果表明,2种阴离子标准曲线线性相关系数均大于0.9991,测定结果的相对偏差(n=10)分别是0.81%和0.89%。用该方法对样品进行测定并进行加标回收试验,加标回收率在98.0%～101.0%之间,能满足大气降水中阴离子的分析要求,是降水样品中阴离子分析的理想方法。     

基于主成分分析的上海市大气降水中DL-PCBs来源初判

运用主成分分析法(PCA)初步判断2010年11月—2011年10月覆盖上海市18个行政区20个采样点大气降水中类二噁英多氯联苯(DL-PCBs)的来源。结果表明,研究期间上海市大气降水中DL-PCBs成分以五氯代PCBs为主。PC1判断可能为含DL-PCBs成分的日本PCBs产品KC500,PC2判断可能为含DL-PCBs成分的日本KC600及美国Aroclor1260产品,PC3可能为国产PCBs产品。由此判断,上海市大气降水中DL-PCBs受多种来源共同影响。前两大主要来源可能为来自环境中美国Aroclor1260和日本KC500、KC600产品的历史使用残留,第三大来源才可能是我国国产PCBs产品在大气环境中的残留。     

Source and risk assessment of PCBs in sediments of Fenhe reservoir and watershed, China

The concentrations of polychlorinated biphenyls (PCBs) in sediments from the Fenhe reservoir and watershed were detected at 28 sites in wet and dry seasons. The ∑(123)PCBs ranged from n.d. to 126.49 ng g(-1) dw. The dominated congeners were tri-PCBs (34.29%) and tetra-PCBs (24.05%). In the Fenhe reservoir, ∑(123)PCBs presented a decreasing trend, while percentages of low chlorinated congeners showed an increasing trend. For the temporal variations, PCBs homologues profiles of sediment samples and spatial distribution of ∑(123)PCBs for the two periods were similar (with CD = 0.021 and r(2) = 0.999 respectively), although PCBs concentrations in the wet season were significantly higher than in the dry season. PCA was applied to analyze the possible sources for PCBs, suggesting that PCBs might be mainly influenced by Aroclor 1016 and 1242. Compared with 3 established sediment quality guidelines, levels of PCBs in sediments of the investigated watershed might have a potential biological impact, especially in the wet season.     

GC/FTIR-FID测定石化废水中挥发性有机物

所述石化废水中挥发性有机物分析方法 ,以 GC分离 ,FTIR定性 ,FID定量。水样前处理采用大吹脱体积 ,两级捕集的吹脱捕集技术。为解决剖析分析无标样定量问题 ,成功地实现了 GC/FTIR-FID匹配联机 ,使得未知组分定性定量一次完成。方法变异系数低于 5% ,回收率高于 90 % ,最低检出浓度可达 0 .0 0 5mg/L     

Occurrence of PCBs in raw and finished drinking water at seven public water systems along the Hudson River

Polychlorinated biphenyls (PCBs) were measured in raw and finished drinking water at seven Public Water Systems (PWSs) along the Hudson River as part of a baseline monitoring program prior to the extensive sediment dredging of the Upper Hudson River. Water samples were either analyzed using an Aroclor method (based on USEPA Method 508) or a congener method (Modified Green Bay Mass Balance Method). Using the congener-based method, raw water concentrations ranged from <9.3 to 164.3 ng/L and finished water concentrations ranged from <9.3 to 186.6 ng/L. Using the Aroclor method, finished water concentrations ranged from <5.0 to 200.9 ng/L. Most finished water samples above 73.0 ng/L were from a PWS with wells drilled near the river. Excluding the well data, total PCB concentrations in raw water at systems in the Upper River were similar to concentrations at systems in the Lower River, though the congener patterns differed. Paired comparison of total PCB concentrations using the two analytical methods showed good agreement, although raw water showed a different relationship than finished water.     

Development of a new automated clean-up system for the simultaneous analysis of polychlorinated dibenzo-p-dioxins (PCDDs), dibenzofurans (PCDFs) and 'dioxin-like' polychlorinated biphenyls (dl-PCB) in flue gas emissions by GPC-SPE

A comprehensive clean-up method for quantitative analysis of polychlorinated biphenyls (PCBs) and polychlorinated dibenzo-p-dioxins and dibenzo-furans (PCDD/Fs) in one single extract of environmental samples was developed. Since the chemical nature and toxicity of planar PCBs are similar to those of PCDD/Fs, dioxin-like PCBs and PCDD/Fs are often surveyed together in their exposure assessments. The development of a method for the simultaneous analysis of PCBs and PCDD/Fs in environmental samples is invaluable. The automated clean-up system evaluated in this work consists of three additional steps after traditional extraction: the chromatography on gel permeation (GPC), the concentration of the solvent through the use of an in-line evaporation module and the further purification and separation of PCDDs/Fs and dl-PCBs on an alumina cartridge in the 'SPE module'. In this work, three fly ash samples from an interlaboratory study with different PCDD/F and PCB levels were Soxhlet-extracted and then cleaned up using an automated system. PCDD/Fs and PCBs were determined using isotope dilution and high resolution gas chromatography/high resolution mass spectrometry. The determined values of 17 PCDD/Fs were consistent with the certified values and the relative standard deviations (RSDs) of the determined values were less than 20%. The recoveries of (13)C labeled PCDD/Fs and planar PCBs, and their RSDs were within the ranges specified in EPA1613 and 1668a methods, respectively. An accurate and reliable method was successfully developed and can be used in the simultaneous analysis of PCDD/Fs and planar PCBs in environmental samples.     

Determination of Trace Organochlorinated Pesticides and Polychlorinated Biphenyls in Water

A modified steam distillation liquid-liquid extraction (SDE) device is developed for the enrichment of trace organochlorinated pesticides (OCPs) and polychlorinated biphenyls (PCBs) in up to one litre of water samples. One ml of n-hexane is sufficient to extract the analytes. The extract can be analysed directly by a capillary gas chromatography-electron capture detector. The recoveries range from 84.6 to 102.3% for OCPs and 80.5 to 106.2% for PCBs, respectively. Matrice materials such as lipids and humic substances were removed by the SDE method from the extract and no further cleanup and concentration steps were needed.     

Organochlorine Pesticides and PCBs in Wild Boars from Calabria (Italy)

At present, there are no specific studies on the evaluation of environmental toxicological risks in Calabria (south of Italy) and on the presence of contaminants in the fauna of this region. The aim of the present research was to investigate the levels of contamination by OC pesticides and PCBs in some organs and tissues of wild boars (utilized as 'biological indicator') from various areas of Calabria. Quantitative determinations of organochlorines were carried out using GC-ECD and confirmed with GC-MS in 154 samples from wild boars (heart, liver, lung, kidney, muscle tissue and spleen) during the hunting season from 2000 to 2002. The results indicate the low residual levels of DDE in 8 samples and DDT in 4 samples and PCBs residues (Aroclor 1232) below the detection limits were found. Therefore, these results show that the Calabria region is not at contamination risk from organochlorines and moreover is free from health problems for the consumer of boar meat.     

PCB levels in European eel (Anguilla anguilla) from two coastal lagoons of the Mediterranean

Eels are exposed to pollutants due to their unusual life cycle and are vulnerable to contamination associated with sediment due to their diet, feeding habits and territoriality. Since the 1980s, a decline in American and European eel populations has been recorded. The causes of this decline still are unknown but pollution from domestic and industrial effluents is known to be involved. Since little data is available on PCB contamination in eels from Italian waters, PCBs were measured in muscle of Anguilla anguilla captured in 2001 in two brackish ecosystems of the Mediterranean: the lagoons of Orbetello and Santa Giusta (Italy). PCBs were higher in samples from Orbetello lagoon than in those detected from Santa Giusta lagoon (P < 0.05). Congener and isomer analyses indicated Aroclor 1260 as a likely source of PCBs in the Orbetello and Santa Giusta samples. Only the toxic equivalents (TEQs) of mono-ortho PCBs were calculated.