Metal deposition patterns in central Scotland,as determined by Lichen transplants

Lichen transplants of Hypogymnia physodes were used in a high-density network of sites for collecting airborne metals from the atmosphere in Armadale, a small industrial town in central Scotland. The mapping of the concentrations of various metals revealed a gradient of metal values which decreased outwards from the town's steel foundry. The findings were discussed in the context of a previous epidemiological investigation of lung disease in the town.     

Seasonal monitoring of heavy metals and physicochemical characteristics in a lentic ecosystem of subtropical industrial region, India

Assessment of seasonal changes in surface water quality is an important aspect for evaluating temporal variations of lentic ecosystem (lakes and reservoirs) pollution due to industrial effluent discharge. In this study, nine metals and 15 physicochemical parameters, collected from four sampling sites in a tropical lake receiving the discharge from thermal power plant, coal mine, and chloralkali industry, during the years from 2004 to 2005, were analyzed. For greater efficacy in monitoring of heavy metals, particle-induced X-ray emission has been used during present investigation. Different statistical techniques like analysis of variance, Pearson correlation, principal component analysis, and factor analysis were employed to evaluate the seasonal correlations of physicochemical parameters. Most of the metals and physicochemical parameters monitored in the present study exhibited high spatial and temporal variability. Pertaining to metal pollution, the most polluted site was Belwadah, i.e., waters and sediments had the highest concentration of all the relevant metals. The reference site was characterized by the presence of low concentrations of metals in waters and in sediments. Based on the high metal concentration recorded in lake ambient, drinking, bathing, and irrigation water should not be used by the local people at the effluent discharge points.     

Effects of leachant temperature and pH on leachability of metals from fly ash. A case study: Can thermal power plant, province of Canakkale, Turkey

Lignite powered electric generation plants result in increasing environmental problems associated with gaseous emissions and the disposal of ash residues. Especially, low quality coals with high ash content cause enormous quantities of both gaseous and solid fly ash emissions. The main problem is related to the disposal of fly ash, which, in many cases, contains heavy metals. It is known that toxic trace metals may leach when fly ash is in contact with water. In this study, fly ash samples obtained from the thermal power plant in the town of Can in Turkey were investigated for leachability of metals under different acidic and temperature conditions. The experimental results show that a decrease in pH of the leachant favors the extraction of metal ions from fly ash. A significant increase in the extraction of arsenic, cadmium, chromium, zinc, lead, mercury, and selenium ions from the ash is attributed to the instability of the mineral phases. These heavy metals concentrations increase with respect to increasing acidic conditions and temperature. Peak concentrations, in general, were found at around 30°C.     

Seasonal variation of some heavy metal pollution with environmental and microbiological parameters in sub-basin of Kocabas Stream (Biga, Canakkale, Turkey) by ICP-AES

Waste water pollution in industrial areas is one of the most important environmental problems. Heavy metal pollution, especially chromium species in waste water sources from tannery affects our lives. Kocabas Stream is located in south-west Marmara region and Biga town is positioned in the sub basin on the stream. This water source functions as the water for irrigation in agriculture, drinking water for animals and for human use. Thus, this study is of great importance. Waste water pollution can affect all ecosystems and human health by directly or indirectly as in food chain. The concentration of heavy metals (Pb, Cd, Cu, Zn and Cr) were pre-analysed by ICP-AES method in water samples taken from sub-basin of Kocabas stream. In the results of these analyses, concentrations of the metals except chromium were founded at the limit value. But the total concentration of the Cr was found at high levels of between 0.0082 +/- 0.0001 and 5.7231 +/- 0.0921 mg l(-1) over the limit value (0.05 mg l(-1); WHO, EPA, TSE 266 and inland water quality classification) at sampling points very close to tannery factories. Also physicochemical and microbiological parameters of Kocabas Stream were determined. The effects of the experimental results on environment were investigated.     

Is PM10 mass measurement a reliable index for air quality assessment? An environmental study in a geographical area of north-eastern Italy

The aim of this study was to measure the concentration of some metals (Cd, Cr, Cu, Fe, Mn, Ni, Pb, and Ti) in PM(10) samples collected in one urban and one industrial site and to assess that PM(10) total mass measurement may be not sufficient as air quality index due to its complex composition. Metals were determined by inductively coupled plasma-atomic emission spectroscopy (ICP-AES) and differential pulsed anodic stripping voltammetry (DPASV). The measured concentrations were used to calculate the content of metals in the PM(10) total mass, and to estimate the enrichment factors and the correlations between PM(10), metal concentrations and meteorological data for the two sites. The mean PM10 concentration during the sampling period in the urban site exceeded the annual European Union (EU) standard (40 microg/m(3)) and, for some sampling days, the daily EU standard (50 microg/m(3)) was also exceeded. In opposite, both EU standards were never exceeded in the industrial site. The overall metal content was nearly double in the industrial site compared to the urban one, and the mean Ni concentration exceeded the EU annual limit value (10 ng/m(3)). The metals with the highest enrichment factor were Cd, Cu, Ni and Pb for both sites, suggesting a dominant anthropogenic source for these metals. Metal concentrations were very low and typical of rural background during Christmas holidays, when factories were closed. PM(10) total mass measurement is not a sufficient air quality index since the metal content of PM(10) is not related to its total mass, especially in sites with industrial activities. This measurement should be associated with the analysis of toxic metals.     

渭河陕西段表层沉积物重金属污染特征及潜在风险

为了解渭河陕西段表层沉积物重金属的污染特征，采用ICP-MS分析了13个采样断面表层沉积物中As、Cd、Cr、Cu、Mn、Ni、Pb和Zn 8种重金属的含量，并对其来源和生态风险进行了评价。结果表明：渭河陕西段8种重金属的平均含量顺序依次为Mn > Zn > Cr > Cu > Ni > Pb > As > Cd；除Ni外的其余7种重金属的平均含量均超过陕西省A层土壤背景值。各断面表层沉积物重金属的潜在生态风险指数（RI）介于111.4~7 043.7，其中23.1%的断面有极强生态风险，46.2%的断面为中等生态风险，其余为轻微生态风险。Cd污染最为严重，对各断面的潜在生态风险介于较强生态风险与极强生态风险之间，对RI的贡献平均为85.2%；其余7种重金属在所有断面均属于轻微生态危害。渭河陕西段表层沉积物As、Cd、Cu和Zn主要为工业与农业来源；Cr和Ni主要为自然来源；Pb和Mn与城市污水和交通污染来源有关。     

Performance of an in situ passive sampling system for metals in stormwater

A passive sampler has been developed and is demonstrated in situ for urban runoff. The passive sampler is compared to conventional composite (time-dependent and flow-weighted) bottle sampling during and between storm events. The sampling was carried out at established stormwater stations; before and after a stormwater detention pond. In situ deployment of the passive sampler provides the metal concentrations, corresponding to the electrochemically available fraction of total metal, for time-dependent samples collected in parallel. The sampler provides improved accuracy compared to bottle sampling because contamination during sample transport and handling is minimised. Laboratory handling is reduced by direct analysis of the accumulated metals on the receiving membrane by laser ablation inductively coupled plasma mass spectrometry. Passive sampling also solves the problem of metal speciation change during transport to the laboratory, which is a potential problem for bottle samples. The low cost and convenience of the passive sampler and subsequent analysis should allow significantly more extensive spatial and temporal monitoring of metals in the aquatic environment than has previously been possible.     

New approaches for assessment of occupational exposure to metals using on-site measurements

Traditional assessment of occupational exposure to metals typically involves static or personal aerosol sampling on a membrane filter followed by a laboratory determination of the metal content on the filter sample. These techniques give results with high accuracy and low detection limits. However, they all have a drawback in that, since the samples have to be analysed in a laboratory, the results will usually be obtained days or weeks after the sampling took place. Today there is available a new generation of portable electronic micro-balances and instruments for metal analysis based on X-ray fluorescence. These instruments will make on-site measurements of metal exposure possible, which opens the way for new approaches for assessment of occupational exposure to metals. In combination with high-flow pumps, short-term sampling is possible, which allows monitoring of the exposure variation during a work shift as well as the exposure during individual work tasks of short duration. Screening measurements and emission measurements are other examples of monitoring that are facilitated using on-site determinations. Measure control monitoring can effectively be performed using on-site measurements and is an effective tool in the assessment of workplace improvements. On-site determinations can also form an effective and pedagogic tool showing workers how to perform specific tasks and demonstrating the effectiveness of different measures intended to improve their work environment. Other examples are the assessment of skin exposure using aerosol deposition on pads and screening of contamination using bulk samples.     

Spatial and temporal variability of metals in inter-tidal beach sediment of Mumbai, India

Nine metals were monitored in the beach sediment in Mumbai from May 2011 to March 2012 to evaluate the spatial and temporal distributions. The average heavy metal concentrations exhibited the following order: Fe > Mn > Cr > Co > Ni > Pb > Zn > Cu > Cd for the four sampling sites. The mean concentrations (± SD) of Fe, Mn, Cr, Co, Ni, Pb, Zn, Cu and Cd were estimated to be 31.15?±?10.02 g kg^?1, 535.04?±?76.42, 151.98?±?97.90, 92.76?±?14.18, 67.52?±?11.32, 59.57?±?15.19, 54.65?±?15.01, 32.24?±?8.07 and 18.75?±?1.76 mg kg^?1, respectively. The results indicated that the sediments were polluted with Cd, Cr, Co and Pb due to high anthropogenic influences. Spatial variation of metals revealed that most of the metals were high in Dadar beach and low in Aksa beach. Cd was the highest contaminant metal studied with a mean contamination factor of 93.75. The pollution load indices of the studied beaches ranged from 1.63 (Aksa) to 1.91 (Dadar) and indicated that the beach sediments were polluted with heavy metals. The heavy metal contents increased in relation to monsoon, and most of the heavy metals showed significantly high concentrations in November during the post-monsoon. The statistical analysis revealed significant effect of study site on all the metals studied. Further, there was a significant difference on metal accumulation on bimonthly basis in relation to weather pattern in Mumbai beaches.     

Use of feathers of feral pigeons (Columba livia) as a technique for metal quantification and environmental monitoring

This study quantifies metal concentrations in washed and unwashed feathers of feral pigeons (Columba livia). The material was collected in two different sites: Goiania (capital of Goiás State), with high anthropic activities, and Jataí (a city in Goiás), with low anthropic activities. Results revealed that metals such as Pb, Cr, and Cd were deposited in the feathers originating from air and soil (exogenous process). Other metals such as Cu, Fe, Mn, and Zn, which are part of the tissue constitution of a living being, were absorbed through the pigeons' diet (endogenous process). There was a statistically significant difference between mean values of Cd, Pb, and Cr in the three collection sites. The order of metal concentrations were Civic Square > Zoo > Jataí, which shows highest levels of metal contamination in anthropic environments. Significant differences between Cd, Pb, and Cr in washed and unwashed feathers suggest that metal concentrations are directly related to exposure time due to exogenous sources. We concluded that it is possible to quantify and monitor metal levels in the environment by analyzing the feathers of urban feral pigeons. Furthermore, unwashed feathers were especially efficient to investigate endogenous and exogenous absorption of the metals in our study.     

湖南省某冶炼厂周边农田土壤重金属污染及生态风险评价

利用野外采样与实验室分析相结合的方法,以湖南省某冶炼厂周边农田土壤(0~20 cm)为研究对象,监测了Cd、As、Pb、Cr、Cu、Zn、Hg等7种重金属的含量,并对重金属污染程度与潜在生态风险进行了评价。结果表明,7种重金属都存在不同程度的超标或污染,其中Cd、As、Pb等的污染较为严重。统计学分析结果表明,Pb、As、Hg、Zn、Cd等来源相同,可能主要都来自于人为污染,即冶炼作业造成的污染。7种重金属化学形态不尽相同:在重金属有效态中,Cd的水溶态和可提取态较高;Pb、Cu、Zn可还原态、可氧化态这两部分含量较高。而Hg、As、Cr的残渣态含量较高。风险评价代码评价结果表明,Cd的生态风险较高,4.5%的样点Cd为极高生态风险,52.8%的样点Cd为高生态风险,42.7%的样点Cd为中度生态风险;100%的样点Zn为中度生态风险;Cu有60.1%的样点属于低生态风险,39.9%的样点属于中度生态风险;As、Pb主要以低生态风险为主(所占比例分别为77.2%、80%);Hg主要以无生态风险为主(所占94.3%)。Hakanson潜在生态风险指数法计算的综合潜在生态风险指数(RI)的范围为46.4~1 627.5,表明研究区域农田土壤存在很高的生态风险。上述各项结果综合表明,研究区农田土壤受到了严重的重金属污染,由此引起的重金属生态风险应引起高度关注。     

Demonstrating PM<Subscript>2.5</Subscript> and road-side dust pollution by heavy metals along Thika superhighway in Kenya,sub-Saharan Africa

This study assessed the level of heavy metal in roadside dust and PM_2.5 mass concentrations along Thika superhighway in Kenya. Thika superhighway is one of the busiest roads in Kenya, linking Thika town with Nairobi. Triplicate road dust samples collected from 12 locations were analysed for lead (Pb), chromium (Cr), cadmium (Cd), nickel (Ni), zinc (Zn), and copper (Cu) using atomic absorption spectrophotometry (AAS). PM_2.5 samples were collected on pre-weighed Teflon filters using a BGI personal sampler and the filters were then reweighed. The ranges of metal concentrations were 39–101 μg/g for Cu, 95–262 μg/g for Zn, 9–28 μg/g for Cd, 14–24 μg/g for Ni, 13–30 μg/g for Cr, and 20–80 μg/g for Pb. The concentrations of heavy metals were generally highly correlated, indicating a common anthropogenic source of the pollutants. The results showed that the majority of the measured heavy metals were above the background concentration, and in particular, Cd, Pb, and Zn levels indicated moderate to high contamination. Though not directly comparable due to different sampling timeframes (8 h in this study and 24 h for guideline values), PM_2.5 for all sites exceeds the daily WHO PM_2.5 guidelines of 25 μg/m³. This poses a health risk to people using and working close to Thika superhighway, for example, local residents, traffic police, street vendors, and people operating small businesses. PM_2.5 levels were higher for sites closer to Nairobi which could be attributed to increased vehicular traffic towards Nairobi from Thika. This study provides some evidence of the air pollution problem arising from vehicular traffic in developing parts of the world and gives an indication of the potential health impacts. It also highlights the need for source apportionment studies to determine contributions of anthropogenic emissions to air pollution, as well as long-term sampling studies that can be used to fully understand spatiotemporal patterns in air pollution within developing regions.     

Chemcatcher and DGT passive sampling devices for regulatory monitoring of trace metals in surface water

This work aimed to evaluate whether the performance of passive sampling devices in measuring time-weighted average (TWA) concentrations supports their application in regulatory monitoring of trace metals in surface waters, such as for the European Union's Water Framework Directive (WFD). The ability of the Chemcatcher and the diffusive gradient in thin film (DGT) device sampler to provide comparable TWA concentrations of Cd, Cu, Ni, Pb and Zn was tested through consecutive and overlapping deployments (7-28 days) in the River Meuse (The Netherlands). In order to evaluate the consistency of these TWA labile metal concentrations, these were assessed against total and filtered concentrations measured at relatively high frequencies by two teams using standard monitoring procedures, and metal species predicted by equilibrium speciation modeling using Visual MINTEQ. For Cd and Zn, the concentrations obtained with filtered water samples and the passive sampling devices were generally similar. The samplers consistently underestimated filtered concentrations of Cu and Ni, in agreement with their respective predicted speciation. For Pb, a small labile fraction was mainly responsible for low sampler accumulation and hence high measurement uncertainty. While only the high frequency of spot sampling procedures enabled the observation of higher Cd concentrations during the first 14 days, consecutive DGT deployments were able to detect it and provide a reasonable estimate of ambient concentrations. The range of concentrations measured by spot and passive sampling, for exposures up to 28 days, demonstrated that both modes of monitoring were equally reliable. Passive sampling provides information that cannot be obtained by a realistic spot sampling frequency and this may impact on the ability to detect trends and assess monitoring data against environmental quality standards when concentrations fluctuate.     

Using public participation to sample trace metals in lake surface sediments: the OPAL Metals Survey

Members of the public in England were invited in 2010 to take part in a national metals survey, by collecting samples of littoral sediment from a standing water body for geochemical analysis. To our knowledge, this is the first national sediment metals survey using public participation and reveals a snapshot of the extent of metals contamination in ponds and lakes across England. Hg, Ni, Cu, Zn and Pb concentrations exceeding sediment quality guidelines for the health of aquatic biota are ubiquitous in ponds and lakes, not just in areas with a legacy of industrial activity. To validate the public sampling approach, a calibration exercise was conducted at ten water bodies selected to represent a range of lakes found across England. Sediment concentrations of Hg, Ni, Cu, Zn and Pb were measured in samples of soil, stream and littoral and deep water sediment to assess inputs. Significant differences between littoral sediment metal concentrations occur due to local variability, but also organic content, especially in upland, peat soil catchments. Variability of metal concentrations between littoral samples is shown to be low in small (<20 ha) lowland lakes. Larger and upland lakes with more complex inputs and variation in organic content of littoral samples have a greater variability. Collection of littoral sediments in small lakes and ponds, with or without voluntary participation, can provide a reliable sampling technique for the preliminary assessment of metal contamination in standing waters. However, the heterogeneity of geology, soils and history/extent of metal contamination in the English landscape, combined with the random nature of sample collection, shows that systematic sampling for evaluating the full extent of metal contamination in lakes is still required.     

Metal levels in sediments from the Minho estuary salt marsh: a metal clean area?

Total-recoverable metals (Al, Cr, Cu, Fe, Mn, Ni, Pb and Zn) in sediments from Minho estuary salt marsh were determined to evaluate possible increase in anthropogenic contamination by metals and to evaluate the possibility of this area to be considered a pristine area in terms of metals, which can be used as a reference site for other metal-contaminated national and international estuaries/salt marshes. This study revealed that the spatial distribution of metals in the salt marsh sediments was not homogeneous and that two sampling sites (sites 5 and 7) had indications of anthropogenic contamination. However, metal levels in these salt marsh sediments were lower than those observed in the wetlands of the main Portuguese estuaries. Comparison with Portuguese and international reference values used in the evaluation of the ecological quality of sediments, indicated that the sediments can be classified as “clean sediment” and that metal levels were lower or similar (only for Cu and Ni) to the values of ERL, which are the values that define the concentrations ranges that are rarely associated to adverse biologic effects in organisms. In addition, metal levels in the sediments were in chemical forms that were not easily available to organisms, indicating that these sediments probably will not have negative influences in the organisms living in the salt marsh, although no life-form ecological safety tests have been carried out. Therefore, the Minho estuary salt marsh area can probably be considered a pristine area in terms of metals and can be used as a reference for other metal-contaminated estuaries/salt marshes.     

A feeding inhibition based prediction of the toxic effect of dissolved metal mixtures upon Echinogammarus marinus (Crustacea: Amphipoda) at field relevant concentrations across a latitudinal gradient

Risk assessment of metals in the environment is performed mainly with toxicity evaluations on single metals, which is largely inadequate since these substances occur in mixtures. The development of models predicting combined toxic effects on the basis of the concentration-response relationships of individual compounds has emerged as an answer. In the present study, metal effects on post-exposure anorexia (the concept of FdC(50)--concentration causing 50% of feeding inhibition--is implemented) in Echinogammarus marinus, a widely distributed gammarid amphipod, were assessed and compared with modelled ones obtained through the application of the concentration addition (CA) model, which represents a reasonable worst-case scenario for the risk assessment of metal mixtures. Data were validated using in situ experiments performed along a latitudinal gradient (Iceland, Scotland and Portugal) aiming at establishing a geographic profile of autochthonous population susceptibilities to metals. For all of the metals studied concentrations in the water column at exposure sites were in good agreement with feeding inhibition levels. Models gave low to relatively high percentage agreement between predictions and experimental data. Boreal populations demonstrated higher susceptibility to single metals, but not to mixture exposures. Meridional populations denoted lower susceptibilities with higher FdC(50).     

Comparison of trace metal bioavailabilities in European coastal waters using mussels from Mytilus edulis complex as biomonitors

Mussels from Mytilus edulis complex were used as biomonitors of the trace metals Fe, Mn, Pb, Zn, and Cu at 17 sampling sites to assess the relative bioavailability of metals in coastal waters around the European continent. Because accumulated metal concentrations in a given area can differ temporally, data were corrected for the effect of season before large-scale spatial comparisons were made. The highest concentration of Fe was noted in the North Sea and of Mn in the Baltic. Increased tissue concentrations of Pb were recorded in the mussels from the Bay of Biscay and the Baltic Sea. Low concentrations of metals were determined in the mussels from the Mediterranean Sea and the Northern Baltic. Relatively low geographic variations of Cu and Zn indicate that mussels are able to partially regulate accumulated body concentrations, which means Cu and Zn are, to some extent, independent of environmental concentrations.     

Trace metals in the bottom sediments of the harbour of Lagos,Nigeria

A study has been made of the heavy metal contents of sediments in the harbour of Lagos which receives a variety of human and industrial wastes. The results indicate three areas with low, medium and high pollution by heavy metals. The harbour in which most shipping activities are concentrated has a low level of pollution. Both other areas with medium and high pollution by heavy metals are located at the entrance and in northwest sections of the harbour respectively, which receive effluents from industries and communities.     

Concentrations of heavy metals and aquatic macrophytes of Govind Ballabh Pant Sagar an anthropogenic lake affected by coal mining effluent

Five heavy metals Cu, Cd, Mn, Pb and Hg were found in high concentration from three sampling sites located in Asia’s largest anthropogenic lake Govind Ballabh Pant GBP Sagar. Concentrations of these heavy metals were measured in Water, bottom sediment and in different parts of the aquatic macrophytes collected from the reservoir. Plants collected from the lake were Eichhornia crassipes, Azolla pinnata, Lemna minor, Spirodela polyrrhiza, Potamogeton pectinatus, Marsilea quadrifolia, Pistia stratiotes, Ipomea aquqtica, Potamogeton crispus, Hydrilla verticillata and Aponogeton natans. These plants have shown the high concentrations of Cu, Cd, Mn, Pb and Hg in their different parts due to bioaccumulation. In general plant roots exhibited higher concentrations of heavy metals than corresponding sediments. A comparison between different morphological tissues of the sampled plants reveled the metal concentration in following order roots > leaves. Analyses of bottom sediment indicated the higher concentrations of Cd, Mn, Cu and Pb. Strong positive correlations were obtained between the metals in water and in plants as well as between metal in sediment and in plants. Indicating the potential of these plants for pollution monitoring of these metals.     

Metal Pollution Assessment of Surface Sediments Along a New Gas Pipeline in the Niger Delta (Nigeria)

Chromium, nickel, copper, zinc and cadmium were determined in sediments of the Niger Delta (Nigeria) in order to discriminate between natural metal sources and anthropogenic ones. Surface sediments were collected at seven sites along a new gas pipeline near Port Harcourt, between the New Calabar River and the Bonny River towards Bonny town. Chemical characterisation is obtained by hydrofluoric–nitric acid digestion procedure, providing the ‘total’ (‘residual’) metal contents. Information about the anthropogenic metal fraction was obtained by cold diluted hydrochloric acid extraction procedure. This ‘labile’ acid soluble fraction of metals, perhaps due to relatively recent inputs in the sediments, constitutes the fraction more likely to be available to marine organisms, and furnishes a first evaluation of the possible toxicity of sediments of this sensitive ecosystem. Zinc appears to be the most available of all the heavy metals: its ‘labile’ fraction attains 40–50% of the ‘total’ zinc in sediment. Sites near Port Harcourt city are the most contaminated. All the examined metals are one order of magnitude below the respective values proposed as a limit for toxicity and are comparable with those observed by other authors in similar Niger Delta areas. Some anomalous data found near Port Harcourt city suggest that zinc and cadmium are the metals that require further monitoring. Their anthropogenic source could be derived from urban and industrial sewage.