首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到10条相似文献,搜索用时 78 毫秒
1.
During the last 10–15 years heuristic methods have been developed for problems in optimal reserve selection. Unfortunately, there is no guarantee that heuristics will find optimal solutions. In recognizing this limitation, analysts have formulated reserve selection problems as set covering problems, for which matrix reduction and integer (0/1) programming can be used to find optimal solutions. In this paper we restate the set covering formulation and review solution techniques. A new 0/1 programming model, which is a generalization of the set covering model, is then presented and applied to a hypothetical reserve selection problem. Objectives of minimizing the number of sites selected and maximizing the number of species represented are addressed. Solutions which characterize the tradeoffs between these objectives provide a rich set of information for planners and decision makers. Applications of mathematical programming to related problems in land use planning and forestry are also discussed.  相似文献   

2.
A hundred Enterococcus strains were isolated from seawater samples collected from coastal areas of Istanbul. Isolates were identified to the species level using standard biochemical tests specified by Facklam and Collins. The species distribution was as follows Enterococcus faecalis (96%), Enterococcus gallinarum (3%) and Enterococcus solitarius (1%). The resistance of bacteria to both heavy metals (zinc [Zn], iron [Fe], cadmium [Cd], chrome [Cr], cobalt [Co]) and antibiotics (ampicillin 10 μg [AP], penicillin G 10 Units [PG], gentamycin 10 μg [GM], streptomycin 10 μg [S], chloramphenicol 10 μg [C], erythromycin 15 μg [E], kanamycin 30 μg [K], amikacin 30 μg [AK], nalidixic acid 30 μg [NA], and vancomycin 30 μg [VA]) was evaluated. None of the strains was resistant to VA. It was found that among the 100 isolates, those that exhibit resistance to antibiotics, particularly NA, S and K, were also resistant all the heavy metals tested. To our knowledge this is the first report focusing on determination of resistance of environmental enterococci found in Istanbul against heavy metals and antibiotics. Thus, combined expressions of antibiotic and heavy metal resistance may help to reinforce ecological and epidemiological studies and to determine the role of these strains in antibiotic and heavy metal resistance dissemination.  相似文献   

3.
Spatial autocorrelation in ecological systems is a critical issue for monitoring (and a general understanding of ecological dynamics) yet there are very few data available, especially for riverine systems. Here, we report here on assemblage-level autocorrelation in the benthic-invertebrate assemblages of riffles in two adjacent, relatively pristine rivers in south-eastern Victoria, Australia (40-km reaches of the Wellington [surveys in summers of 1996 and 1997] and Wonnangatta Rivers [survey in summer of 1996 only], with 16 sites in each river). We found that analyses were similar if the data were resolved to family or to species level. Spatial autocorrelation was assessed by using Mantel-tests for the data partitioned into different sets of spatial separations of survey sites (e.g. 0–6 km, 6–12 km, etc.). We found strong small-scale (≤6 km) autocorrelation in the Wellington River, which is consistent with known dispersal abilities of many aquatic invertebrates. Surprisingly, there were strong negative correlations at longer distance classes for the Wellington River in one of the two summers (20–40 km) and the Wonnangatta River (12–20 km). That two largely unimpacted, adjacent rivers should have such different autocorrelation patterns suggests that impact assessment cannot assume dependence or independence of sites a priori. We discuss the implications of these results for use of “reference” sites to assess impacts at nominally affected sites.  相似文献   

4.
Concentrations of polycyclic aromatic hydrocarbons (PAHs) in street soil dust from streets in Kumasi Metropolis in the Ashanti Region of the Republic of Ghana have been measured in this study. The concentrations of the various types of PAHs identified in this study are as follows: Naphthalene (m/e 128) – 41,700 μg/kg, Acenaphthylene (m/e 152) – 99,300 μg/kg, Acenaphthene (m/e 154) – 111,200 μg/kg, Fluorene (m/e 166) – 8,900 μg/kg, Carbazole (m/e 167) – 3,500 μg/kg, phenathrene (m/e 178) – 12,900 μg/kg, Anthracene (m/e 178) – 5,400 μg/kg, Fluoranthene (m/e 202) – 16,200 μg/kg, Pyrene (m/e 202) – 15,000 μg/kg, Benzo[a]anthracene (m/e 228) – 13,800 μg/kg, Chrysene (m/e 228) – 33,600 μg/kg, Benzo[k]fluoranthene (m/e 252) – 45,700 μg/kg, Benzo[a]pyrene (m/e 252) – 27,900 μg/kg, Perylene (m/e 252) – 57,200 μg/kg and Benzo[g, h, i]perylene (m/e 276) – 47,000 μg/kg. The results of the study shows that road users, like resident living in buildings within these areas, those engaged in commercial activities like hawking, and the general public are at risk of exposure to the toxic effects of the various types of PAHs from the exhaust of vehicles into the environment. According to these results, there is the potential for exposure to high levels of PAHs for road users and those living in urban environments or along highways.  相似文献   

5.
This study deals with numerical simulation of flow fields and dispersion of model passive admixtures in the planetary boundary layer in a 10 × 10 km square area, centered on the Czech Republic’s Temelín Nuclear Power Plant. Numerical calculations of three-dimensional flow fields with eight basic wind directions given for the inlet boundary of the computational domain are performed using the FLUENT CFD code with the standard kε turbulence model. The resultant modeling of the flow fields provides information as to probable local directions and velocities of flow vectors on a horizontal scale of 100 m, which are consistent with the data given for the boundaries of the calculation area in the framework of a scale of 10 km. The modeled flow fields generate the input data for related Lagrangian simulation of the ground concentration and deposition fields of passive particles assumedly emitted at the site of the Temelín plant. Simulated plumes describe eight cases of potential ground-level distribution of model passive admixtures in the area.  相似文献   

6.
Tree damage, gauged by the amount of defoliation, is one of the basic criteria used to determine treatments for protected and economic forests. Monitoring should include an assessment of the degree of tree damage in different spatial scales. Therefore, in addition to the commonly applied large-area methods, small-area methods should be used. The aim of the paper is to present the results of the accuracy assessment of a small-area method, proposed by Podlaski (2005) [Podlaski, R. (2005). Inventory of the degree of tree defoliation in small areas. Forest Ecology and Management, 215, 361–377], for monitoring the degree of tree damage. The degree of tree damage was shown in sub-blocks P3 of the system of information on natural environment (SINUS). To estimate the spatial distribution of the degree of tree defoliation, survey sampling, based on simple random sampling with replacement (SRSWR), was used. The degree of damage to fir (Abies alba Mill.) and beech (Fagus sylvatica L.) was analysed in the Święty Krzyż forest section in the Świętokrzyski National Park. The maximum total estimation errors for the proportion of trees with a degree zero of damage, and with second and third degrees of damage together (for α = 0.05) were at most 30.8% for fir and 24.3% for beech trees. For standard, small-area evaluations, these are satisfactory values. In the Święty Krzyż forest section, the number of P3 sub-blocks with 0.00–5.00% of undamaged trees and with 80.01–100.00% of moderately- or severely-damaged trees was significantly greater for fir than for beech. These results indicate that the fir population was unhealthier than the beech group in the study area. P3 sub-blocks of the SINUS system, in which the proportion of the healthiest trees was highest, were situated at the forest margin, bordering on meadows and arable fields (in the case of fir) and forming dense patches consisting of several sub-blocks, or occurring singly in the whole study area (in the case of beech). The results show the significant differentiation of forest tree health in small areas.  相似文献   

7.
Efficiency,costs and trade-offs in marine reserve system design   总被引:1,自引:0,他引:1  
With marine biodiversity conservation the primary goal for reserve planning initiatives, a site's conservation potential is typically evaluated on the basis of the biological and physical features it contains. By comparison, socio-economic information is seldom a formal consideration of the reserve system design problem and generally limited to an assessment of threats, vulnerability or compatibility with surrounding uses. This is perhaps surprising given broad recognition that the success of reserve establishment is highly dependent on widespread stakeholder and community support. Using information on the spatial distribution and intensity of commercial rock lobster catch in South Australia, we demonstrate the capacity of mathematical reserve selection procedures to integrate socio-economic and biophysical information for marine reserve system design. Analyses of trade-offs highlight the opportunities to design representative, efficient and practical marine reserve systems that minimise potential loss to commercial users. We found that the objective of minimising the areal extent of the reserve system was barely compromised by incorporating economic design constraints. With a small increase in area (<3%) and boundary length (<10%), the economic impact of marine reserves on the commercial rock lobster fishery was reduced by more than a third. We considered also how a reserve planner might prioritise conservation areas using information on a planning units selection frequency. We found that selection frequencies alone were not a reliable guide for the selection of marine reserve systems, but could be used with approaches such as summed irreplaceability to direct conservation effort for efficient marine reserve design.  相似文献   

8.
The combination of morphological, clay mineralogy, physicochemical, and fertilitical properties of inceptisols were compared for monitoring soil quality response following long-term agricultural activities. For this target, fifty-nine paired surface soils belonging to five subgroups of inceptisols from the major sugar beet growing area and the adjoining virgin lands were described, sampled, and analyzed. The soils were alkaline and calcareous as characterized by high pH, ranging from 7.2 to 8, and calcium carbonate equivalent, ranging from 60 to 300 g kg − 1. Following long-term sugar beet cultivation, morphological properties modifications were reflected as weakening of structure, hardening of consistency, and brightening of soil color. Although, the quantity of clay minerals did not significantly change through long-term cropping, some modifications in the XRD pattern of illite and smectite were observed in the cultivated soils compared to the adjoining virgin lands mainly as a result of potassium depletion. Without significant variation, sand content decreased by 4–55% and silt and clay increased by 3–22% and 2–15%, respectively, in the cultivated soils than to that of the virgin lands. Both negative and positive aspects of soil quality were reflected regarding soil chemical and fertilitical properties and the role of negative effects far exceeded the role of positive effects. Typic calcixerepts was known to be more degraded through a significant decrease (P ≤ 0.001) in mean value of soil organic carbon (a drop of 24%), total N (a drop of 23%), available K (a drop of 42%), exchangeable K (a drop of 45%), potassium adsorption ratio and potassium saturation ratio (a drop of 44% and 42%, respectively) and a significant increase (P ≤ 0.001) in EC (a rise of 53%). Soil quality index, calculated based on nine soil properties [coarse fragments, pH, SOC, total N, ESP, exchangeable cations (Ca, Mg, and K), and available phosphorus], indicated that 60% of the all soil types studied had negative changes, 20% had positive changes, and 20% produced no changes in soil heath.  相似文献   

9.
Physico-chemical characteristics of some river and hand-dug well waters used for drinking and domestic purposes in the oil rich Niger Delta area of Nigeria were assessed using standard methods. The concentrations of the parameters in the river water samples ranged in the following order: pH (5.6–6.9), temperature (26.90–28.60°C), turbidity (23–63 NTU), electrical conductivity (52–184 μs/cm), DO (5.4–7.2 mg/l), BOD (21–57 mg/l), TDS (6.0–217 mg/l), PO4 3− (0.19–1.72 mg/l), SO4 2− (25–36.8 mg/l), NO3 (20.3–28 mg/l), Fe (6.07–15.71 mg/l), Zn (0.04–0.24 mg/l), Pb (0.01–0.17 mg/l), Ni (0.01–0.13 mg/l), Vn (0.01–0.20 mg/l) and Hg (0.001–0.002 mg/l). The concentrations of these parameters in the hand-dug well water ranged in the following order: pH (5.7–6.8) temperature (26–30°C), turbidity (134–171 NTU), electrical conductivity (160–340 μs/cm), DO (5.4–6.4 mg/l), BOD (13–34 mg/l), TDS (110–190 mg/l), PO4 3− (0.84–1.84 mg/l), SO4 2− (10.6–28.1 mg/l), NO3 (11.3–23 mg/l), Fe (13.17–16.31 mg/l), Ni (0.01–0.02 mg/l), Vn (0.01–0.04 mg/l) and Hg (0.001–0.004 mg/l). The concentrations of BOD, turbidity, NO3 and Fe in the water samples were above WHO and FMENV permissible limits for safe drinking water. The results suggest that the use of such waters for drinking and domestic purposes pose a serious threat to the health of the users and calls for the intervention of government agencies.  相似文献   

10.
Concentrations of heavy metals were determined in the water column (including the sea-surface microlayer, subsurface, mid-depth and bottom water) and sediments from Singapore’s coastal environment. The concentration ranges for As, Cd, Cr, Cu, Ni, Pb and Zn in the seawater dissolved phase (DP) were 0.34–2.04, 0.013–0.109, 0.07–0.35, 0.23–1.16, 0.28–0.78, 0.009–0.062 and 0.97–3.66 μg L−1 respectively. The ranges for Cd, Cr, Cu, Ni, Pb and Zn in the suspended particulate matter (SPM) were 0.16–0.73, 6.72–53.93, 12.87–118.29, 4.34–60.71, 1.10–6.08 and 43.09–370.49 μg g−1, respectively. Heavy metal concentrations in sediments ranged between 0.054–0.217, 37.48–50.52, 6.30–21.01, 13.27–26.59, 24.14–37.28 and 48.20–62.36 μg g−1 for Cd, Cr, Cu, Ni, Pb and Zn, respectively. The lowest concentrations of metals in the DP and SPM were most frequently found in the subsurface water while the highest concentrations were mostly observed in the SML and bottom water. Overall, heavy metals in both the dissolved and particulate fractions have depth profiles that show a decreasing trend of concentrations from the subsurface to the bottom water, indicating that the prevalence of metals is linked to the marine biological cycle. In comparison to data from Greece, Malaysia and USA, the levels of metals in the DP are considered to be low in Singapore. Higher concentrations of particulate metals were reported for the Northern Adriatic Sea and the Rhine/Meuse estuary in the Netherlands compared to values reported in this study. The marine sediments in Singapore are not heavily contaminated when compared to metal levels in marine sediments from other countries such as Thailand, Japan, Korea, Spain and China.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号