NITRATE CONCENTRATIONS IN RIYADH, SAUDI ARABIA DRINKING WATER SUPPLIES

Riyadh, Saudi Arabia is supplied with drinking water fromboth desalinated sea water and treated groundwater sources. Sampleswere analysed for NO₃ from selected deep and shallow wells, two locations within the city's six groundwater treatment plants, thedesalinated sea water and distribution network. Average nitrateconcentrations (as NO₃) were 8.2 and 15.8 mg/L for deep andshallow well waters, respectively. The average nitrate concentrations (asNO₃) in the groundwater treatment plants influent waters and thefinal product water were 16.2 and 8.5 mg/L, respectively. Due toblending of the plants' product water with the desalinated sea water, theaverage network nitrate concentration was 4.4 mg/L. The scheduledwater interruption does not seem to cause any appreciable change in thenitrate levels in the distribution network.     

Chemical Composition of Bottled Water in Saudi Arabia

Fourteen domestic and seven imported bottled water brands were analysed in Saudi Arabia for various physico-chemical water quality parameters. The results of the analysis were compared with the drinking water standards set by Saudi Arabia and World Health Organization. The levels of different physico-chemical parameters like TDS, Ca, Mg, Na, K, NO₃, Cl and SO₄ of all local and imported bottled water brands met the different drinking water standards. Fluoride was found below the Saudi Arabian Standard Organization recommended limits in two of the local brands whereas fluoride levels in all of the imported brands were below the recommended values. In one imported brand, pH was found not conforming to the recommended standards. The concentrations of trace metals in all brands were within the drinking water standards. Comparison of the study results with the reported label values indicated good agreement with stated pH values but considerable variation for Ca, Mg, and Na in the local brands and comparatively low variation in the imported brands. Low F and SO₄ variations were found in the local brands and comparatively high SO₄ variation in the imported brands.     

Nitrate,sulphate and chloride contents in public drinking water supplies in Sicily,Italy

Water samples collected from public drinking water supplies in Sicily were analysed for electric conductivity and for their chloride, sulphate and nitrate contents. The samples were collected as uniformly as possible from throughout the Sicilian territory, with an average sampling density of about one sample for every 7,600 inhabitants. Chloride contents that ranged from 5.53 to 1,302 mg/l were correlated strongly with electric conductivity, a parameter used as a proxy for water salinity. The highest values are attributable to seawater contamination along the coasts of the island. High chloride and sulphate values attributable to evaporitic rock dissolution were found in the central part of Sicily. The nitrate concentrations ranged from 0.05 to 296 mg/l, with 31 samples (4.7% of the total) exceeding the maximum admissible concentration of 50 mg/l. Anomalous samples always came from areas of intensive agricultural usage, indicating a clear anthropogenic origin. The same parameters were also measured in bottled water sold in Sicily, and they all were within the ranges for public drinking water supplies. The calculated mean nitrate intake from consuming public water supplies (16.1 mg/l) did not differ significantly from that of bottled water (15.2 mg/l). Although the quality of public water supplies needs to be improved by eliminating those that do not comply with the current drinking water limits, at present it does not justify the high consumption of bottled water (at least for nitrate contents).     

Quality assessment of various bottled waters marketed in Saudi Arabia

This study focuses on the chemical analysis of the available brands of domestic bottled water in Riyadh City, Saudi Arabia. The distribution of the chemical constituents (major, minor, and trace elements) is determined and compared with the chemical content labeled on the bottles and with drinking water standards of Saudi Arabian, World Health Organization, and U.S. Environmental Protection Agency. The obtained results indicated that except for fluoride and bromate, the concentrations of dissolved salts, soluble cations and anions, nitrate, and trace elements of most bottled waters on sale were within the permissible limits set by standards used. On the other hand, the comparison between determined and reported label values recorded a substantial variation in some parameter values. Results indicated that more than 18 % of the sampled bottled waters exceeded the allowable limits for drinking water. Generated Piper diagrams revealed that the majority of investigated waters were sodium chloride–sulfate type; however, the hydrochemical modeling indicated that all water samples were undersaturated for anhydrite, gypsum, and halite.     

Groundwater Quality Assessment of Tehsil Kheragarh, Agra (India) with Special Reference to Fluoride

Fluoride concentration and other parameters in groundwater from 261 villages in Tehsil Kheragarh of District Agra were assessed and attempts were made to observe the relationship between fluoride and other water quality parameters. Of 658 groundwater samples (collected from separate sources) analysed for fluoride, 27% were in the range of 0–1.0 mg/L, 25% in 1.0–1.5 mg/L, 32% in1.5–3.0 mg/L and 16% above 3.0 mg/L. The highest fluoride concentration recorded was 12.80 mg/L. Significant correlation of fluoride with pH, alkalinity, Na, SiO₂ and PO₄ were observed. Factor analysis was also attempted in order to identify the contributing sources.     

Investigations on boron levels in drinking water sources in China

To evaluate boron contamination of public drinking water in China, both dissolved and total boron contents in 98 public drinking water sources from 49 cities, 42 brands of bottled water samples from supermarkets in several cities, and 58 water samples from boron industrial area were measured by inductively coupled plasma-mass spectrometry (ICP-MS). Our experimental results showed that boron existed in public drinking water sources mainly in dissolved status with total concentrations ranging from 0.003 to 0.337 mg/L (mean = 0.046 mg/L). The mean boron concentrations in mineral and pure bottled water were 0.052 and 0.028 mg/L, respectively. The results obtained in this work showed that there was no health risk on view of boron in public drinking water sources and bottled water. In boron industrial area, boron concentrations in surface water and ground water were 1.28 mg/L (range = 0.007–3.8 mg/L) and 18.3 mg/L (range = 0.015–140 mg/L), respectively, which indicated that boron industry caused boron pollution in local water system.     

Detection of bacterial endotoxin in drinking tap and bottled water in Kuwait

This study was carried out to measure and compare the concentration of bacterial endotoxin in a variety of samples from drinking tap and bottled water available in Kuwait by using the Limulus Amoebocyte lysate test. A total of 29 samples were tested. Samples were collected from a variety of locations throughout the six governorates of Kuwait and 23 brands of local and imported bottled water samples were collected from the local market. The concentration of bacterial endotoxin was measured by using the standard Limulus Amoebocyte lysate test, gel clot method. This study showed that measured endotoxin concentrations in tap drinking water varied from 2.4 to 33.8?EU/ml with the average endotoxin concentration of 14.2?EU/ml. While the results of endotoxin concentrations in the bottled water were <0.03 to 20.1?EU/ml with an average of 1.96?EU/ml. The average concentration of endotoxin in bottled water is 13.5 % of the average concentration of endotoxin in tap drinking water. This experimental investigation has proved that drinking bottled water has less endotoxin as compared to tap water in Kuwait. It is also demonstrated that the endotoxin concentration did not exceed the acceptable level in drinking tap water.     

遂宁城乡集中式饮用水水源地钡分布特征及健康风险评价

为考察遂宁市辖区内集中式饮用水水源地污染物钡的分布特征和健康风险水平,通过电感耦合等离子体原子发射光谱法对研究区域内市级、县级和乡镇级所有在用的56个集中式饮用水水源地钡的浓度进行分析检测,借助空间分析与统计分析的结果,探讨了其空间分布和浓度差异,并利用环境健康风险评价模型,对不同类型水源地钡的健康风险进行了评价。结果表明,38个地表水水源地钡的浓度范围为0.065~0.180 mg/L,均值为0.110 mg/L;18个地下水水源地钡的浓度范围为0.027~0.370 mg/L,均值为0.130 mg/L。地表水与地下水水源地间钡的浓度差异具有统计学意义(P0.05),钡的空间分布也存在不同程度的差异性。各水源地中的钡经饮用和皮肤暴露两种途径对成人和儿童所引起的非致癌风险值为1.34×10~(-8)~1.62×10~(-8),远低于推荐的最大可接受风险水平(1.0×10~(-6)),各水源地因污染物钡导致的非致癌风险极低。     

Chlorination and water quality monitoring within a public drinking water supply in Rawalpindi Cantt (Westridge and Tench) area, Pakistan

Concern over the presence of fecal coliform in public drinking water supplies has been expressed in recent years in Pakistan since it has been regarded as pathogenic organism of prime importance in gastroenteritis. Two major drinking water distribution systems in the Cantt area of Rawalpindi district covering the Westridge and Tench areas was monitored over a 2-month period to determine the prevalence of fecal coliform and chlorine residual. The collected samples were examined for total chlorine, free chlorine residual, chloramines, total coliforms, fecal coliforms, and turbidity. The drinking water quality monitoring in the distribution network was performed by collecting samples from water source, overhead reservoir, and residential taps. In the Westridge area, total chlorine varied from the lowest value of 0.27 mg/L at Station # W-5 to the highest value of 0.42 mg/L at Station # W-2, total coliforms varied from 1.1 to 3.6 most probable number (MPN)/100 mL with presence of Escherichia coli in all samples, total dissolved solids (TDS) ranged from 199.5 to 205 mg/L, conductivity fluctuated between 399 and 411 microS/cm, and turbidity varied from 0.43 to 0.73 NTU. In the Tench area, the value of total chlorine ranged from 0.14 mg/L at Station # T-7 to 0.55 mg/L at Station # T-1. Total coliform varied from 3.6 to 5.1 MPN/100 mL and fecal coliform were detected at all the stations except at Station # T-1. TDS ranged from 201.4 to 257 mg/L, conductivity varied from 343 to 513 microS/cm, and turbidity ranged between 0.66 and 1.55 NTU. It is recommended to the respective agencies to ensure that the chlorine residual is available at consumer end.     

石家庄市农村饮用水中氟化物健康风险评估

利用中国疾病预防控制信息系统农村饮用水水质监测数据,对2010年18个项目县的水质监测结果进行分析,评估石家庄市农村饮用水氟化物对人群危害的风险。 石家庄市农村饮用水中氟化物浓度为0.01~0.98 mg/L,平原县和山区县饮用水氟化物浓度差异无显著性(t=-1.403,P>0.05),只有72份氟化物浓度超过0.5 mg/L,占9.7%。石家庄市农村患龋齿风险性较大,及时增加氟的摄入量非常必要。