首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到10条相似文献,搜索用时 125 毫秒
1.
Indraprastha Power Station (IPP Stn) and Rajghat Power House (RPH), owned by Delhi Electric Supply Undertaking, are both coal-fired power stations located on Ring Road in New Delhi. Ash content of the coal used ranges between 38–47%. The ash is collected in electrostatic precipitators which have an efficiency of 99.3% (IPP station), and 99.7% (RPH). There are instances of major dust pollution around the power stations from fly ash dispersal. The main method of disposal of fly ash from the power stations is by mixing with water, the resultant slurry is pumped through pipes to ash disposal ponds. The supernatant from these ponds is discharged into River Yamuna. Field studies have revealed large quantities of fly ash being deposited into the river. Local populations of Eichhornia crassipes have reduced dramatically between 1987–1995, with a marked reduction in the year 1994–1995. Field studies, conducted in January, 1995 have investigated the impact of fly ash dispersal in the Delhi region with particular reference to metal contamination. Elemental concentrations for a range of elements are determined by ICP-AES in fly ash and top soils along four transects from the power stations up to a distance of 8 km. The effects of fly ash leachates from the ash settling ponds on the river are determined by analyzing river overbank soils and vegetation for their elemental contents. It is concluded that fly ash dispersal from the stacks are a source of alkali, alkaline-earth and to some extent heavy metals in soils in the vicinity of the power stations, and enrichment of elements in river overbank soils are a result of discharge of fly ash leachates from ash disposal ponds. However, the impact from both these sources of metal contamination is not large enough to give cause for concern. Marked reduction in populations of Eichhornia crassipes downstream of the river where it receives leachates from the ash disposal ponds are attributed to turbidity of the ash pond leachates and metal toxicity. Elemental enrichment in the floodplain soils, as a result of fly ash particle deposition during monsoons, may enhance the horticultural value of these soils as is shown by a healthy cultivated crop of Brassica juncea.  相似文献   

2.
Lignite powered electric generation plants result in increasing environmental problems associated with gaseous emissions and the disposal of ash residues. Especially, low quality coals with high ash content cause enormous quantities of both gaseous and solid fly ash emissions. The main problem is related to the disposal of fly ash, which, in many cases, contains heavy metals. It is known that toxic trace metals may leach when fly ash is in contact with water. In this study, fly ash samples obtained from the thermal power plant in the town of Can in Turkey were investigated for leachability of metals under different acidic and temperature conditions. The experimental results show that a decrease in pH of the leachant favors the extraction of metal ions from fly ash. A significant increase in the extraction of arsenic, cadmium, chromium, zinc, lead, mercury, and selenium ions from the ash is attributed to the instability of the mineral phases. These heavy metals concentrations increase with respect to increasing acidic conditions and temperature. Peak concentrations, in general, were found at around 30°C.  相似文献   

3.
Use of lignite in power generation has led to increasing environmental problems associated not only with gaseous emissions but also with the disposal of ash residues. In particular, use of low quality coal with high ash content results in huge quantities of fly ash to be disposed of. The main problem related to fly ash disposal is the heavy metal content of the residue. In this regard, experimental results of numerous studies indicate that toxic trace metals may leach when fly ash contacts water. In this study, fly ash samples obtained from thermal power plants, namely Soma and Tunçbilek, located at the west part of Turkey, were subjected to toxicity tests such as European Committee for standardization (CEN) and toxicity characteristic leaching (TCLP) procedures of the U.S. Environmental Protection Agency (U.S. EPA). The geochemical composition of the tested ash samples from the power plant show variations depending on the coal burned in the plants. Furthermore, the CEN and TCLP extraction results showed variations such that the ash samples were classified as `toxic waste' based on TCLP result whereas they were classified as `non-toxic' wastes based on CEN results, indicating test results are pH dependent.  相似文献   

4.
NALCO – the largest exporter of aluminium in India has a power plant of 720 MW capacity in Nandira watershed in Angul district of Orissa. The power plant utilises local coal to generate thermal power and disposes of large amount of ash which accumulates in slurry form at nearby two ash ponds. These ash ponds were breached on 31 December 2000, causing ash accumulation for entire regime of the Nandira river. An attempt has been made towards preparation of recovery and rehabilitation plan for NALCO using temporal Remote Sensing data and GIS. Indian remote sensing satellite data for pre-breach condition 12 December 2000, during breach event 31 December 2000 and post-breach condition 4 and 6 January 2001 has been digitally analysed for Nandira watershed. The satellite data of coarse spatial resolution provides the absence and presence of fresh sediment deposition along Nandira watershed and Brahmani river pertaining to pre-breach and post-breach conditions respectively on regional scales. The temporal comparison of fine resolution has clearly highlighted the aerial extent of damage caused by the disaster for entire watershed on local scales. The GIS has helped in demarcation of freshly accumulated ash at interval of 500 m along the river length as well as in delineation of maximum ash accumulation across the river width. The study has clearly demonstrated the use of temporal Remote Sensing data in conjunction with GIS for disaster management in terms of recovery and rehabilitation plan preparation of the Nandira watershed.  相似文献   

5.
The attenuation of arsenic in groundwater near alkaline coal fly ash disposal facilities was evaluated by determining the uptake of arsenic from ash leachates by surrounding alkaline soils. Ten different alkaline soils near a retired coal fly ash impoundment were used in this study with pH ranging from 7.6 to 9.0, while representative coal fly ash samples from two different locations in the coal fly ash impoundment were used to produce two alkaline ash leachates with pH 7.4 and 8.2. The arsenic found in the ash leachates was present as arsenate [As(V)]. Adsorption isotherm experiments were carried out to determine the adsorption parameters required for predicting the uptake of arsenic from the ash leachates. For all soils and leachates, the adsorption of arsenic followed the Langmuir and Freundlich equations, indicative of the favorable adsorption of arsenic from leachates onto all soils. The uptake of arsenic was evaluated as a function of ash leachate characteristics and the soil components. The uptake of arsenic from alkaline ash leachates, which occurred mainly as calcium hydrogen arsenate, increased with increasing clay fraction of soil and with increasing soil organic matter of the alkaline soils. Appreciable uptake of arsenic from alkaline ash leachates with different pH and arsenic concentration was observed for the alkaline soils, thus attenuating the contamination of groundwater downstream of the retired coal fly ash impoundment.  相似文献   

6.
Although many leaching methods have been used for various purposes by research groups, industries, and regulators, there is still a need for a simple but comprehensive approach to leaching coal utilization by-products and other granular materials in order to estimate potential release of heavy metals when these materials are exposed to natural fluids. A serial batch characterization method has been developed at the National Energy Technology Laboratory that can be completed in 2–3 days to serve as a screening tool. The procedure provides an estimate of cumulative metals release under varying pH conditions, and leaching the sample at increasing liquid/solid ratios can indicate the rate at which this process will occur. This method was applied to eight fly ashes, adapted to the acidic or alkaline nature of the ash. The leachates were analyzed for 30 elements. The test was run in quadruplicate, and the relative standard deviation (RSD) was used as a measure of method reproducibility. RSD values are between 0.02 and 0.70, with the majority of the RSD values less than 0.3. The serial batch leaching procedure was developed as a simple, relatively quick, yet comprehensive method of estimating the risk of heavy metal release from fly ash when it is exposed to natural fluids, such as acid rain or groundwater. Tests on a random selection of coal fly ashes have shown it to be a reasonably precise method for estimating the availability and long-term release of cations from fly ash.  相似文献   

7.
石河子燃煤电厂重金属排放研究   总被引:3,自引:2,他引:1  
万勤  孟优  陈平  李杰 《中国环境监测》2015,31(6):129-133
选取石河子市典型燃煤电厂,对其燃煤烟气重金属排放浓度及飞灰、底渣、脱硫石膏重金属的富集进行定量分析。结果表明,烟气中各重金属排放浓度从高到低依次为Zn、Ni、Cr、Pb、Cu、Hg、Co、Cd、As。各重金属元素在飞灰中的富集程度较高,除Hg、Cd、Ni外,其他重金属元素在飞灰的富集因均值均大于5。其中,As在飞灰的富集因子均值为5.76。研究结果可为石河子重金属污染控制提供基础数据。  相似文献   

8.
为探究燃煤电厂周边大气环境中重金属的污染特征与来源,对广东某山区燃煤电厂周边地区环境和污染源的重金属进行测定,分析其污染特征,采用因子分析法和Pb同位素示踪法对环境中的重金属进行来源解析。结果表明,研究区域室内积尘中重金属浓度水平明显高于土壤重金属,污染空间分布与当地气象条件相关。环境空气TSP中重金属主要来自2个污染源,Cd、Pb、As主要来自电厂燃煤,Ca、Mn、Al、Mg主要来自土壤扬尘。TSP、降尘、积尘样品所含的Pb均与电厂采集的煤、炉渣、粉煤灰样品所含的Pb具有同源性,与其他污染源同源性不明显,说明研究区域大气中Pb污染主要来自电厂燃烧所排放的烟尘,其他污染源影响不大。  相似文献   

9.
The Singrauli region in the southeastern part of Uttar Pradesh, India is one of the most polluted industrial sites of Asia. It encompasses 11 open cast coalmines and six thermal power stations that generate about 7,500 MW (about 10% of India’s installed generation capacity) electricity. Thermal power plants represent the main source of pollution in this region, emitting six million tonnes of fly-ash per annum. Fly-ash is deposited on soils over a large area surrounding thermal power plants. Fly-ashes have high surface concentrations of several toxic elements (heavy metals) and high atmospheric mobility. Fly ash is produced through high-temperature combustion of fossil fuel rich in ferromagnetic minerals. These contaminants can be identified using rock-magnetic methods. Magnetic susceptibility is directly linked to the concentration of ferromagnetic minerals, primarily high values of magnetite. In this study, magnetic susceptibility of top soil samples collected from surrounding areas of a bituminous-coal-fired power plant were measured to identify areas of high emission levels and to chart the spatial distribution of airborne solid particles. Sites close to the power plant have shown higher values of susceptibility that decreases with increasing distance from the source. A significant correlation between magnetic susceptibility and heavy metal content in soils is found. A comparison of the spatial distribution of magnetic susceptibility with heavy-metal concentrations in soil samples suggests that magnetic measurements can be used as a rapid and inexpensive method for proxy mapping of air borne pollution due to industrial activity.  相似文献   

10.
A pilot scale study was conducted to find out the different forms of metals if fly ash (FA) and bioaccumulation of these metals in the naturally growing vegetation on FA dumps. The total, acid extractable, bioavailable and water soluble fraction of metals of Fe, Cu, Mn, Zn, Ni, Co and Pb, and their bioaccumulation coefficients (BAC) on naturally growing vegetation were determined. FA samples had a neutral pH, low electrical conductivity, low organic C and trace amounts of N and P. The relative abundance of total metals in FA were found in the order Fe ≤ ≤ Zn ≤ Ni ≤ Co ≤ Cu. The concentration of bioavailable (DTPA) metals depend on the type and nature of coal used in thermal power stations. In the water the extract solution, only Fe and Zn were found above detection limits. After one year only four species of naturally occurring herbaceous vegetation were found growing and Cynodon dactylon (grass) covered almost entire surface of the FA. Iron accumulated to the greatest extent in vegetation followed by Mn, Zn, Cu, Pb, Ni and Co. The sequence of BAC for different metals were Fe (202) ≤ Mn (90) ≤ Zn (63) ≤ Pb (49) ≤ Ni (41) ≤ Cu (24). The experimental study revealed that Cynodon grass could be used for remediation of fly ash without any amendments, as this grass species act as metal excluder type.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号