Electrofishing in boatable rivers: Does sampling design affect bioassessment metrics?

Data were collected from 60 boatable sites using an electrofishing design that permitted comparisons of the effects of designs and distances on fish assemblage metrics. Sites were classified a priori as Run-of-the-River (ROR) or Restricted Flow (RF). Data representing four different design options (i.e., 1000 and 2000 m for both single and paired banks) were extracted from the dataset and analyzed. Friedman tests comparing metric values among the designs detected significant differences for all richness metrics at both types of sites and for catch per unit effort and percent tolerant species at ROR sites. Richness metrics were generally higher for the two 2000-m designs than for the two 1000-m designs. When plotted against cumulative electrofishing distance, the percent change in metrics declined sharply within approximately 1000 m, after which metrics usually varied by less than 10%. These data demonstrate that designs electrofishing 1000 m of shoreline are sufficient for bioassessments on boatable rivers similar to those in this study, regardless of whether the shoreline is along a single bank or distributed equally among paired banks. However, at sites with depths greater than 4 m, it may be advisable to employ nighttime electrofishing or increase day electrofishing designs to 2000 m.The U.S. Governments right to retain a non-exclusive, royalty free licence in and to any copyright is acknowledged.     

What do qualitative rapid assessment collections of macroinvertebrates represent? A comparison with extensive quantitative sampling

It is a fundamental tenet of Rapid Biological Assessments (RBA) that the samples collected reflect the community from which they are drawn. As with any biological sampling, RBA collections are subject to sampling error resulting in the omission of some taxa. The aim of this study is to compare the composition of RBA samples with an estimate of community structure based on extensive quantitative sampling. We used logistic regression to explore the relationships between the frequency of a taxon being collected in an RBA sample and its biological and ecological traits, namely its abundance, distribution, body size and habit. RBA samples and quantitative estimates of community structure were made in riffles in the Kangaroo and Nepean Rivers, New South Wales, Australia. Single RBA samples may collect up to 63% of the taxa that are collected by extensive quantitative sampling at a site. The frequency of a taxon being recorded in an RBA sample was significantly and positively related to all traits tested indicating a bias in the collection methods towards large, abundant and widely distributed taxa. Accordingly, taxa missed by RBA sampling were generally small, narrowly distributed or rare. These findings enhance our understanding of what RBA samples represent, and the bias and source of errors associated with RBA sampling. This study also quantifies the utility of RBA methods for biodiversity assessment.     

Spatial variation in soil carbon in the organic layer of managed boreal forest soil—implications for sampling design

We studied within-site spatial variation of the carbon stock in the organic layer of boreal forest soil. A total of 1,006 soil samples were taken in ten forest stands (five Scots pine stands and five Norway spruce stands). Our results indicate that the spatial autocorrelation disappears at a distance of 75-225 cm. This spatial autocorrelation should be taken into account in the sampling design by locating the sampling points at adequate intervals. With a sample size of over 20-30 samples per site, additional soil samples do not notably improve the precision of the site mean estimate. An adequate sample size is dependent on the purpose of sampling and on the site-specific soil variation. Our results on the dependence between sample size and precision of the mean estimates can be applied in designing efficient soil monitoring in boreal coniferous forests.     

Surveying drainage culvert use by carnivores: sampling design and cost�Cbenefit analyzes of track-pads vs. video-surveillance methods

Environmental assessment studies often evaluate the effectiveness of drainage culverts as habitat linkages for species, however, the efficiency of the sampling designs and the survey methods are not known. Our main goal was to estimate the most cost-effective monitoring method for sampling carnivore culvert using track-pads and video-surveillance. We estimated the most efficient (lower costs and high detection success) interval between visits (days) when using track-pads and also determined the advantages of using each method. In 2006, we selected two highways in southern Portugal and sampled 15 culverts over two 10-day sampling periods (spring and summer). Using the track-pad method, 90% of the animal tracks were detected using a 2-day interval between visits. We recorded a higher number of crossings for most species using video-surveillance (n = 129) when compared with the track-pad technique (n = 102); however, the detection ability using the video-surveillance method varied with type of structure and species. More crossings were detected in circular culverts (1 m and 1.5 m diameter) than in box culverts (2 m to 4 m width), likely because video cameras had a reduced vision coverage area. On the other hand, carnivore species with small feet such as the common genet Genetta genetta were detected less often using the track-pad surveying method. The cost-benefit analyzes shows that the track-pad technique is the most appropriate technique, but video-surveillance allows year-round surveys as well as the behavior response analyzes of species using crossing structures.     

Can we gain precision by sampling with probabilities proportional to size in surveying recent landscape changes in the Netherlands?

Seventy-two squares of 100 ha were selected by stratified random sampling with probabilities proportional to size (pps) to survey landscape changes in the period 1996–2003. The area of the plots times the urbanization pressure was used as a size measure. The central question of this study is whether the sampling with probabilities proportional to size leads to gain in precision compared to equal probability sampling. On average 1.03 isolated buildings per 100 ha have been built, while 0.90 buildings per 100 ha have been removed, leading to a net change of 0.13 building per 100 ha. The area with unspoiled natural relief has been reduced by 2.3 ha per 100 ha, and the length of linear relicts by 137 m per 100 ha. On average 74 m of linear green elements have been planted per 100 ha, while 106 m have been removed, leading to a net change of −31 m per 100 ha. For the state variables ‘unspoiled natural relief', ‘ linear relicts', ‘removed linear green elements', and ‘new – removed linear green elements' there is a gain in precision due to the pps-sampling. For the remaining state variables there is no gain or even a loss of precision (`new buildings', ‘removed buildings', ‘new – removed buildings', ‘new linear green elements'). Therefore, if many state variables must be monitored or when interest is not only in the change but also in the current totals, we recommend to keep things simple, and to select plots with equal probability.     

Effect of sampling method on contaminant measurement in pore-water and surface water at two uranium operations: can method affect conclusions?

This paper describes a comparison of two methods of sediment pore-water sampling and two methods of surface water sampling that were used in a broader investigation of cause(s) of adverse effects on benthic invertebrate communities at two Saskatchewan uranium operations (Key Lake and Rabbit Lake). Variables measured and compared included pH, ammonia, DOC, and trace metals. The two types of sediment pore-water samples that were compared are centrifuged and 0.45-microm filtered sediment core samples vs. 0.2-microm dialysis (peeper) samples. The two types of surface water samples that were compared are 53-microm filtered Van Dorn horizontal beta samples vs. 0.2-microm dialysis (peeper) samples. Results showed that 62% of the sediment core pore water values were higher than the corresponding peeper pore-water measurements, and that 63% of the Van Dorn surface water measurements were lower than corresponding peeper surface water measurements. Furthermore, only 24% and 14% of surface water and pore-water measurements, respectively, fell within +/-10% range of one another; 73% and 50%, respectively, fell within +/-50%. Although somewhat confounded by differences in filtering method, the observed differences are believed to primarily be related to small, vertical differences in the environment sampled. Despite observed differences in concentrations of toxicologically relevant variables generated by the different sampling methods, the weight of evidence (WOE) conclusions drawn from each set of exposure data on the possible cause(s) of in situ toxicity to Hyalella azteca from a related study were the same at each uranium operation. However, this concurrence was largely due to other dominant lines of evidence. The WOE conclusions at Key Lake were dominated by the toxicity response of H. azteca in relation to exposure chemistry, where as the WOE conclusions at Rabbit Lake were informed by exposure chemistry, the toxicological response of H. azteca, and whole-body contaminant concentrations in the test organisms. Had these multiple lines of evidence not been available, differences in exposure chemistry generated by the different sampling methods could have substantially influenced the identification of potential causes of in situ toxicity.     

A comparison of sampling techniques and summary indices for assessment of water quality in the Yamaska River,Québec,based on benthic macroinvertebrates

The Yamaska River drainage basin in Quebec, Canada, is intensively farmed and heavily polluted with poorly treated domestic and industrial wastes. We investigated the responses of the resident and colonizing components of the benthic macroinvertebrate community to municipal/industrial versus agricultural pollution in the basin, and evaluated the performances of seven diversity and biotic indices for assessing water quality. Samples of riffle-dwelling, infaunal and colonizing invertebrates were collected from 13 stations representing a wide range of types and degrees of pollution using Surber, scoop and artificial substrate samplers. The data were summarized using the indices S (number of taxa), N (number of individuals), H (Shannon-Wiener's diversity index), D (Simpson's diversity index), BBI (Belgian Biotic Index), TBI (a modification of Hilsenhoff's Biotic Index), % CHIR (percentage of arthropods consisting of Chironomidae) and %OLIGO (percentage of total organisms consisting of Oligochaeta). Different components of the community generated somewhat different assessments and were, therefore, complementary. Community composition, expressed as the percentage of individuals contributed by major taxonomic groups, reflected the kinds of stresses at a station more consistently than did any of the indices. S and TBI came closest to ranking control, agricultural and municipal/industrial sites in accordance with our a priori classification, both between months and among sampling methods. %OLIGO usually separated municipal/industrial sites from control sites. Other indices were found to be less sensitive, accurate or temporally stable, or were otherwise inappropriate for use with certain sampling methods or for certain types of pollution. With most of our samples, all of the summary indices suggested that the impact of agricultural practices on stream ecosystems may be as severe as the impacts of municipal and industrial wastes.     

Determination of selected microbial volatile organic compounds by diffusive sampling and dual-column capillary GC-FID--a new feasible approach for the detection of an exposure to indoor mould fungi?

A new, analytically valid procedure is described to assess the exposure of human beings to the so-called microbial volatile organic compounds (MVOCs) in air. The method can be used routinely for large sample numbers and is especially valuable as a basis for further research on the correlation between single MVOCs and indoor mould growth. The procedure is based on the fact that fungi produce a variety of volatile organic compounds, such as 3-methylbutan-1-ol, 3-methylbutan-2-ol, fenchone, heptan-2-one, hexan-2-one, octan-3-one, octan-3-ol, pentan-2-ol, alpha-terpineol, and thujopsene, which they emit into the indoor environment. Using diffusive samplers, these MVOCs are adsorbed onto charcoal during a sampling interval of four weeks. The described method is thus superior to existing methods which use short-term active sampling. After desorption with carbon disulfide, the MVOCs were determined by dual-column gas chromatography with flame ionization detection using the large-volume injection technique for sample introduction. The detection limits ranged between 0.15 and 0.53 microgram m-3, within-series precision was found to range between 6.5 and 19.0%, and recovery was between 77 and 118%. The procedure has been successfully applied in the context of a large field study to measure the indoor MVOC exposure in children's rooms of 132 dwellings. The objective of the study was to examine the relation between indoor mould growth, the indoor MVOC exposure and the prevalence of adverse health effects. Information about mould formation has been obtained by a questionnaire and by the determination of colony forming units of mould fungi in mattress dust. With the exception of 3-methylbutan-2-ol, fenchone, nonan-2-one, octan-2-one, and thujopsene, indoor air concentrations of all MVOCs under investigation were significantly higher inside damp and mouldy dwellings. From the primary MVOCs under investigation, 3-methylbutan-1-ol, hexan-2-one, heptan-2-one, and octan-3-ol were found to be most reliable indicators for mould formation. A correlation was also found between selected MVOCs and the occurrence of mould species in mattress dust. Aspergillus sp. correlated with heptan-2-one, hexan-2-one, octan-3-ol, octan-3-one, and alpha-terpineol, while the occurrence of Eurotium sp. was correlated with higher indoor air concentrations of 3-methylbutan-1-ol, 3-methylbutan-2-ol, heptan-2-one, hexan-2-one, octan-3-ol, and thujopsene. Children living in dwellings with elevated MVOC levels had a higher prevalence of asthma, hay fever, wheezing, and irritations of the eyes. These positive associations persisted after controlling for confounding factors such as age, sex, body-mass index, number of siblings, social status, passive smoking, type of heating, and ventilation habits. However, they were not statistically significant. This lack of significance may be a result of the small number of investigated samples.