Risky scenario identification in a risk perception scale for construction workers in Thailand

Introduction: Construction sites exhibit unique hazardous characteristics. Hence, investigating the causes of fatal and nonfatal accidents is extremely important to promote safety on construction sites. Literature shows a risk perception (RP) scale for construction workers; to expand the existing research, this study aims to identify risky scenarios for assessing the RP of Thai construction workers, with the goal of reducing workplace incidents. Method: The scale development process consists of four phases. Item development was also performed, followed by factor analysis. Reliability and validity assessments were finalized in the process. A survey of 500 construction workers in Thailand was conducted to investigate risky scenarios. Through the process, a total of 17 items remained in the final RP scale, and the reliability and validity of these items were confirmed. Results: The RP scale was affirmed to have four dimensions (probability, severity, worry, and unsafe). These dimensions of workers’ RP were negatively correlated with the workers’ risk-taking behaviors. This study further showed that participants with a high level of affective RP were more likely to have a high level of cognitive RP. Hence, those with a high level of RP tended to be involved in fewer risk-taking behaviors. Practical Applications: The final version of the scale was reliable and valid in determining the RP and risk-taking behaviors of construction workers in Thailand.     

Foundational workplace safety and health competencies for the emerging workforce

IntroductionYoung workers (aged 15–24) suffer disproportionately from workplace injuries, with a nonfatal injury rate estimated to be two times higher than among workers age 25 or over. These workers make up approximately 9% of the U.S. workforce and studies have shown that nearly 80% of high school students work at some point during high school. Although young worker injuries are a pressing public health problem, the critical knowledge and skills needed to prepare youth for safe and healthy work are missing from most frameworks used to prepare the emerging U.S. workforce.MethodsA framework of foundational workplace safety and health knowledge and skills (the NIOSH 8 Core Competencies) was developed based on the Health Belief Model (HBM).ResultsThe proposed NIOSH Core Competencies utilize the HBM to provide a framework for foundational workplace safety and health knowledge and skills. An examination of how these competencies and the HBM apply to actions that workers take to protect themselves is provided. The social and physical environments that influence these actions are also discussed.ConclusionsThe NIOSH 8 Core Competencies, grounded in one of the most widely used health behavior theories, fill a critical gap in preparing the emerging U.S. workforce to be cognizant of workplace risks.Practical applicationsIntegration of the NIOSH 8 Core Competencies into school curricula is one way to ensure that every young person has the foundational workplace safety and health knowledge and skills to participate in, and benefit from, safe and healthy work.     

National culture and safe work behaviour of construction workers in Pakistan

It is widely accepted that unsafe behaviour is intrinsically linked to workplace accidents. A positive correlation exists between workers’ safe behaviour and safety climate on construction sites. Construction workers’ attitude towards safety is influenced by their perception of risk, management, safety rules and procedures. Pakistan, a developing country, is currently experiencing a strong growth in its construction activities. Unfortunately, the enforcement of safety regulations in Pakistan is not widespread. Indeed, some relevant regulations are both outdated and irrelevant to daily construction operations. This paper investigates local construction workers’ behaviour, perception and attitude toward safety, and attempts to link the research findings to the influence of national culture. A three-part interview-based questionnaire survey has identified that the majority of workers have a good degree of risk awareness and self-rated competence. Additionally, workers’ intentional behaviour was empirically explained by their attitudes towards their own and management’s safety responsibilities, as well as their perception of the risk they are generally exposed to in their workplace. The paper also reveals that workers operating in a more collective and higher uncertainty avoidance environment, are more likely to have safety awareness and beliefs, which can exhibit safer on-site behaviour.     

Perceived safety climate, job demands, and coworker support among union and nonunion injured construction workers

PROBLEM: This study evaluated injured construction workers' perceptions of workplace safety climate, psychological job demands, decision latitude, and coworker support, and the relationship of these variables to the injury severity sustained by the workers. METHODS: Injury severity was assessed using the Health Assessment Questionnaire (HAQ), which evaluates functional limitations. Worker perceptions of workplace variables were determined by two instruments: (a) the Safety Climate Measure for Construction Sites and (b) the Job Content Questionnaire (JCQ). RESULTS: The overall model explained 23% of the variance in injury severity, with unique contributions provided by union status, the Safety Climate Score, and Psychological Job Demands. A positive significant correlation was found between injury severity and the Safety Climate Scores (r = .183, P = .003), and between the Safety Climate Scores and union status (r = .225, P < .001). DISCUSSION: There were statistically significant differences between union and nonunion workers' responses regarding perceived safety climate on 5 of the 10 safety climate items. Union workers were more likely than nonunion workers to: (a) perceive their supervisors as caring about their safety; (b) be made aware of dangerous work practices; (c) have received safety instructions when hired; (d) have regular job safety meetings; and (e) perceive that taking risks was not a part of their job. However, with regard to the 49-item JCQ, which includes Coworker Support, the responses between union and nonunion workers were very similar, indicating an overall high degree of job satisfaction. However, workers who experienced their workplace as more safe also perceived the level of management (r = -.55, P < .001) and coworker (r = -.31, P < .001) support as being higher. IMPACT ON INDUSTRY: The findings of this study underscore the critical need for construction managers to alert workers to dangerous work practices and conditions more frequently, and express concern and praise workers for safe work in a manner that is culturally acceptable in this industry. Workplace interventions that decrease the incidence and severity of injuries, but that are flexible enough to meet a variety of potentially competing imperatives, such as production deadlines and client demands, need to be identified.     

Respiratory Impairment in Cotton-Ginning Workers Exposed to Cotton Dust

Dust generated during the handling and processing of cotton causes ill health of ginning workers. The purpose of this study was to determine the prevalence of respiratory symptoms among cotton-ginning workers. This study involved 188 workers of 10 cotton-ginning factories. Forced vital capacity (FVC), peak expiratory flow rate (PEFR), and forced expiratory volume in 1 s (FEV1) declined significantly with increasing duration of exposure (p < .001) of the cotton-ginning workers. Results of a standard respirator medical evaluation questionnaire indicated that, depending on duration of exposure, 51%–71% of cotton-ginning workers suffered from chest tightness, 55%–62% experienced chest pain, while 33%–42% of the workers reported frequent cough. Blood tests of the workers showed higher values of erythrocyte sedimentation rate, eosinophils, and white blood cells when exposure was longer. Byssinosis symptoms were observed among the workers. We recommend regular periodical medical check-ups, compulsory use of personal protective equipment, and proper ventilation at the workplace.     

Does the potential safety risk affect whether particular construction hazards are recognized or not?

Introduction: Evidence from the global construction industry suggests that an unacceptable number of safety hazards remain unrecognized in construction workplaces. Unfortunately, there isn’t a sufficient understanding of why particular safety hazards remain unrecognized. Such an understanding is important to address the issue of poor hazard recognition and develop remedial interventions. A recent exploratory effort provided anecdotal evidence that workers often fail to recognize safety hazards that are expected to impose relatively lower levels of safety risk. In other words, the research demonstrated that the underlying risk imposed by a safety hazard can affect whether a hazard will be recognized or not. Method: The presented research focused on empirically testing this preliminary finding. More specifically, the study tested the proposition that Construction workers are more likely to recognize safety hazards that impose higher levels of safety risk than those that impose relatively lower levels of safety risk. The research goals were accomplished through a number of steps. First, a set of 16 construction case images depicting a variety of construction operations that included a number of known safety hazards was presented to a panel of four construction safety experts. The experts were tasked with examining each of the known safety hazards and providing a rating of the relative safety risk that the individual hazards impose. Having obtained an estimate of the underlying safety risk, a hazard recognition activity was administered to 287 workers recruited from 57 construction workplaces in the United States. The hazard recognition activity involved the examination of a random sample of two construction case images that were previously examined by the expert panel and reporting relevant safety hazards. Results: The results of the study provided support for the proposition that workers are more likely to recognize hazards that impose relatively higher levels of safety risk. Practical Applications: The findings of the study can be leveraged to improve existing hazard recognition methods and develop more robust interventions to address the issue of poor hazard recognition levels.     

Impact of psychological capital on construction worker safety behavior: Communication competence as a mediator

IntroductionConstruction workers face a work environment of high risk and mental stress. Psychological capital (PsyCap) could influence employee's mental health and work performance. It would be helpful to determine whether PsyCap affects worker safety behavior. However, few studies empirically examined the impacts of the sub-dimensions of PsyCap on the safety behavior in construction settings, reducing the potential practicability of PsyCap to improve workplace safety performance. Thus, this study tested the relationship between sub-dimensions of PsyCap (self-efficacy, hope, resilience, optimism) and safety behaviors (safety compliance, safety participation), while the mediating role of communication competence was also explored. Method: Data were collected from 655 construction workers in China using a psychological capital questionnaire (PCQ). The theoretical model were tested with confirmatory factor analyses (CFA) and structural equation modeling (SEM) techniques. Results: Results show that: (a) the self-efficacy dimension of PsyCap positively affected safety compliance and safety participation, while the resilience dimension positively impacted safety participation; (b) the hope dimension was not directly related to safety behaviors, while the optimism dimension negatively associated with safety participation; and (c) communication competence mediated the relationships between the hope and optimism dimensions of PsyCap and safety participation. Conclusions: A multidimensional perspective on PsyCap should be taken while examining its effects on safety behavior and the individual communication competence helps to enhance construction safety. Findings of this study shed lights on safety behavior promotion practices based on the multidimensional model. Initiating flexible psychological capital training and intervention, and strengthening communication skills of construction employees are suggested to improve safety performance in the construction industry.     

Perceptions of personal vulnerability to workplace hazards in the Australian construction industry

Introduction

The importance of risk perception for workplace safety has been highlighted by the inclusion of risk appraisals in contemporary models of precautionary behavior at work. Optimism bias is the tendency to think that negative events are less likely to happen to oneself than to the average person, and is proposed to be related to the reduced use of precautions.

Method

Building on studies of optimism bias for workplace hazards using samples with heterogenous risk profiles, the current study aimed to investigate whether optimism bias is present in a sample of workers exposed to similar workplace hazards. 175 Australian construction workers completed a brief survey that asked them to rate the likelihood of common construction industry hazards occurring to them and to the average worker of the same age doing the same job. Significant levels of optimism bias were found for many hazards (including being electrocuted, being trapped in a confined space, falling from heights, and causing someone else to have an injury).

Results

Optimism bias was not related to perceived controllability, contrary to findings in other domains, yet consistent with findings of optimism bias for workplace hazards. Optimism bias was not found to be related to a reduction in safe work behaviors, though this may be due to difficulties in measuring safe or precautionary behavior, such as social desirability.

Impact on industry

That most workers think that hazards are less likely to happen to them than to the average worker presents a significant problem because it may ameliorate the efficacy of safety programs, yet constitutes a largely unexplored opportunity for improving workplace safety performance.     

Occupational Cognitive Failure and Its Relationship With Unsafe Behaviors and Accidents

Objectives. The aim of this study was to assess the relationship between occupational cognitive failures (OCFs) and unsafe behaviors, accidents and driving offences among municipal bus drivers in Tehran, Iran. Methods. Systematic random sampling was used to select 190 drivers from 3 transport and traffic Tehran districts. Data were collected with the occupational cognitive failure questionnaire (OCFQ), the driver behavior questionnaire and a data collection form. Results. The mean (SD) numbers of driving-related offences and road traffic accidents were 1.5 (2.6) and 0.37 (1.0), respectively. The mean (SD) numbers of deliberate driving violations, unintended violations, driving slips and mistakes were 6.97 (5.5), 1.61 (1.5), 13.6 (9.0) and 4.53 (3.28), respectively. The mean (SD) number of the OCFs was 28.9 (20.5). A significant correlation was found between occupational cognitive error and unsafe driving behavior subscales. The stepwise logistic regression results showed that, while controlling the effects of confounding factors, the OCF predicts 6%, 9%, 15% and 9% of deliberate violations, unintended violations, driving slips and driving mistakes, respectively. Conclusion. The results of this study show that the score of the OCFQ is a predictor of unsafe driving behaviors and its subscales.     

Educational status and organizational safety climate: Does educational attainment influence workers’ perceptions of workplace safety?

From a practical perspective, understanding the impact of education on perceptions of workplace safety would benefit management’s decisions regarding workers’ adaptability, general work effectiveness, accident frequency, implementation of safety management policies, and handling of education-related accident characteristics. The current study thus examined the relationship between educational attainment and (i) safety perception, (ii) job satisfaction, (iii) compliance with safety management policies, and (iv) accident frequency. Participants were Ghanaian industrial workers (N = 320) categorized into four educational groups based on their responses: basic education 50% (n = 159); secondary education, n = 98 (30%); vocational/professional education, 17% (n = 56); and university education, 3% (n = 7). Workplace safety perception was assessed with Hayes et al.’s 50-item Work Safety Scale (WSS): a scale that effectively captures the dimensions identified by safety experts to influence perceptions of workplace safety. Multivariate analysis (MANOVA) was used to test for differences of statistical significance. Posterior comparison with t-test consistently revealed significant differences between the two higher-educated cohorts and their lower-educated counterparts. The results indicated a positive association between education and safety perception. Higher-educated workers recorded the best perceptions on safety, indicated the highest level of job satisfaction, were the most compliant with safety procedures and recorded the lowest accident involvement rate.     

Design for occupational safety and health of workers in construction in developing countries: a study of architects in Nigeria

Purpose. Design for safety (DfS) of workers is amongst the prominent ways of tackling poor occupational safety and health performance in construction. However, in developing countries there is extremely limited research on DfS. This study thus makes an important contribution to the subject of DfS in developing countries by specifically examining the awareness and practice of DfS amongst architects within the construction sector of Nigeria. Materials and methods. A survey of architects, yielding 161 valid responses, was conducted. Results. While there is high awareness of the concept of DfS, the actual practice is low. Additionally, although there is high interest in DfS training, the engagement in DfS training is low. Significantly, awareness of DfS, training and education related to DfS, and membership of a design professional body have very limited bearing on the practice of DfS by architects. Conclusions. The findings are thus symptomatic of the prevalence of influential DfS implementation barriers within the construction sector. Industry stakeholders should seek to raise the profile of DfS practice within the sector. Furthermore, similar empirical studies in the construction sector of other developing countries would be useful in shedding light on the status of DfS in these countries.     

The association between subcontractor safety management programs and worker perceived safety climate in commercial construction projects

Problem: Safety management programs (SMPs) are designed to mitigate risk of workplace injuries and create a safe working climate. The purpose of this project was to evaluate the relationship between contractors’ SMPs and workers’ perceived safety climate and safety behaviors among small and medium-sized construction subcontractors. Methods: Subcontractor SMP scores on 18 organizational and project-level safety items were coded from subcontractors’ written safety programs and interviews. Workers completed surveys to report perceptions of their contractor’s safety climate and the safety behaviors of coworkers, crews, and themselves. The associations between SMP scores and safety climate and behavior scales were examined using Spearman correlation and hierarchical linear regression models (HLM). Results: Among 78 subcontractors working on large commercial construction projects, we found striking differences in SMP scores between small, medium, and large subcontractors (p < 0.001), related to a number of specific safety management practices. We observed only weak relationships between SMP scales and safety climate scores reported by 746 workers of these subcontractors (β = 0.09, p = 0.04 by HLM). We saw no differences in worker reported safety climate and safety behaviors by contractor size. Discussion: SMP only weakly predicted safety climate scales of subcontractors, yet there were large differences in the quality and content of SMPs by size of employers. Summary: Future work should determine the best way to measure safety performance of construction companies and determine the factors that can lead to improved safety performance of construction firms. Practical applications: Our simple assessment of common elements of safety management programs used document review and interviews with knowledgeable representatives. These methods identified specific safety management practices that differed between large and small employers. In order to improve construction safety, it is important to understand how best to measure safety performance in construction companies to gain knowledge for creating safer work environments.     

The business cycle and the incidence of workplace injuries: evidence from the U.S.A

Introduction

The current study explored the association between the business cycle and the incidence of workplace injuries to identify cyclically sensitive industries and the relative contribution of physical capital and labor utilization within industries.

Method

Bureau of Labor Statistics nonfatal injury rates from 1976 through 2007 were examined across five industry sectors with respect to several macroeconomic indicators. Within industries, injury associations with utilization of labor and physical capital over time were tested using time series regression methods.

Results

Pro-cyclical associations between business cycle indicators and injury incidence were observed in mining, construction, and manufacturing but not in agriculture or trade. Physical capital utilization was the highest potential contributor to injuries in mining while labor utilization was the highest potential contributor in construction. In manufacturing each effect had a similar association with injuries.

Conclusion

The incidence of workplace injury is associated with the business cycle. However, the degree of association and the mechanisms through with the business cycle affects the incidence of workplace injuries was not the same across industries.

Impact on Industry

The results suggest that firms in the construction, manufacturing, and mining industries should take additional precautionary safety measures during cyclical upturns. Potential differences among industries in the mechanisms through which the business cycle affects injury incidence suggest different protective strategies for those industries. For example, in construction, additional efforts might be undertaken to ensure workers are adequately trained and not excessively fatigued, while safety procedures continue to be followed even during boom times.     

Psychosocial and Individual Characteristics and Musculoskeletal Complaints Among Clinical Laboratory Workers

Musculoskeletal disorders (MSDs) are an important health problem among healthcare workers, including clinical laboratory ones. The aim of the present study was to investigate the prevalence of MSDs and individual and psychosocial risk factors among clinical laboratory workers. A cross-sectional study was carried out among 156 workers of 30 clinical laboratories in 3 towns of Iran. The Nordic questionnaire with individual and psychosocial risk factors was used to collect data. Multiple logistic regression analysis was performed. The prevalence of reported MSDs among the study population was 72.4% in the past 12 months. The most prevalent MSDs were pain in the lower back and neck; 42.7% and 33.3%, respectively. Significant relations were found between MSDs and age, gender, heavy work at home and job control (p < .05). MSDs among laboratory workers were high and associated with age, gender, heavy work at home and job control. More research into measuring these factors and workplace physical demands is suggested.     

Age differences in safety attitudes and safety performance in Hong Kong construction workers

PROBLEM: Safety in the construction industry is a major issue in Hong Kong, representing about 46% of all occupational injuries in 1998. This study explored linear and curvilinear relations between age and safety performance (accident rates and occupational injuries), as well as safety attitudes, in construction workers in Hong Kong. METHOD: A Chinese version of the Safety Attitude Questionnaire (SAQ by Donald & Canter) was developed and administered to a sample of Chinese construction workers (N=374, 366 males, 8 females) from 27 construction sites. RESULTS: Accident rates were not related to age. Occupational injuries were related to age in a curvilinear manner, with injuries at first increasing with age, then decreasing. Two safety attitude scales were related to age with older workers exhibiting more positive attitudes to safety. If age and tenure are controlled, some attitude scales are predictors of safety performance. IMPACT ON INDUSTRY: Management/supervisors, team leaders, and workers are all responsible for safety, and any negative bias toward older construction workers is unfounded.     

The role of safe work method statements in the Australian construction industry

The aim of this study was to determine how managers and workers interpret and use safe work method statements (SWMS) in the Australian construction industry in order to explore if there was a gap between work as imagined and work as performed. Despite recent improvements in its safety performance, the Australian construction industry continues to be among the top four most dangerous industries within which to work. SWMS are a key strategy relied upon by the construction industry to reduce this toll. However, few, if any studies have looked at the role of SWMS in creating a safe workplace. This ethnographic study focused on the role of SWMS at two commercial construction sites in Australia. The researcher spent 6 months ‘getting to know’ the organisation before conducting 18 semi-structured interviews spanning labourers, supervisors and managers. The researcher also collected examples of completed SWMS. This study found: (1) that SWMS are important for safety, particularly for tasks that are out of the ordinary; (2) that social interaction as well as SWMS are important for safety; (3) gaps do exist between work as imagined in a SWMS and work as performed in practice, but in the minds of those on site, there were no unresolved gaps; (4) therefore construction companies must identify and resolve the gaps between SWMS, practice and task demands to make construction sites a safer place to work.     

A qualitative investigation of factors affecting school district administrators’ decision to adopt a national young worker curriculum

Introduction: Even though the majority of youth in the U.S. work, and workers under the age of 18 are seriously injured on the job at higher rates when compared to adults, most adolescents lack instruction on workplace safety and health. Method: This qualitative study examines the extent to which selected U.S. school districts provide workplace safety and health instruction to students and explores the factors that influence districts’ decision to adopt a free, foundational occupational safety and health (OSH) curriculum. Results: Results from key informant interviews conducted with a purposive sample of 34 school administrators revealed that only a third of the districts have at least 75% of their students receive some instruction on workplace safety and health, while 15% indicated they provide no instruction on this topic. District staff who indicated that they provide OSH instruction stated that it is most often taught through career and technical education (CTE; 65%) and/or health classes (26%). They believed the benefits of providing this instruction include assisting students to get jobs (38%) and helping students learn about safety (32%), while competing demands (44%) and time constraints (41%) were identified as barriers to providing OSH education to students. Conclusions: Given the importance of work to teens and their increased risk of work injury, interested stakeholders—including parents, teachers, employers, and the public health community—should promote the inclusion of workplace safety and health instruction in U.S. secondary schools. Practical Applications: This research fills a gap in current knowledge about the extent to which OSH is currently taught within U.S. secondary schools, enumerates barriers and facilitators to the inclusion of workplace safety and health instruction in schools, presents a free, foundational curriculum in workplace safety and health, and provides directions for future research on the vital role schools can play in preparing the future workforce for safe and healthy employment.     

Safety in construction – a comprehensive description of the characteristics of high safety standards in construction work, from the combined perspective of supervisors and experienced workers

Introduction

The often applied engineering approach to safety management in the construction industry needs to be supplemented by organizational measures and measures based on how people conceive and react to their social environment. This requires in-depth knowledge of the broad preconditions for high safety standards in construction. The aim of the study was to comprehensively describe the preconditions and components of high safety standards in the construction industry from the perspective of both experienced construction workers and first-line managers.

Method

Five worker safety representatives and 19 first-line managers were interviewed, all strategically selected from within a large Swedish construction project. Phenomenographic methodology was used for data acquisition and analysis and to categorize the information. Nine informants verified the results.

Results

The study identified four main categories of work safety preconditions and components: (1) Project characteristics and nature of the work, which set the limits of safety management; (2) Organization and structures, with the subcategories planning, work roles, procedures, and resources; (3) Collective values, norms, and behaviors, with the subcategories climate and culture, and interaction and cooperation; and (4) Individual competence and attitudes, with the subcategories knowledge, ability and experience, and individual attitudes.

Discussion

The results comprehensively describe high safety standards in construction, incorporating organizational, group, individual, and technical aspects. High-quality interaction between different organizational functions and hierarchical levels stood out as important aspects of safety. The results are discussed in relation to previous research into safety and into the social-psychological preconditions for other desired outcomes in occupational settings.

Impact on Industry

The results can guide construction companies in planning and executing construction projects to a high safety standard.     

Prevalence and demographic differences in microaccidents and safety behaviors among young workers in Canada

IntroductionThe present study examines the self-reported frequency of non-lost work time workplace injuries (“microaccidents”) and the frequency of three types of work-related safety behaviors (i.e., safety voice, safety compliance, and safety neglect) recalled over a four-week period.MethodWe analyzed data on microaccidents and safety behaviors from 19,547 young workers (aged 15–25 years, Mdn = 18 years; 55% male) from multiple Canadian provinces.ResultsApproximately one-third of all young workers recalled experiencing at least one microaccident at work in the last four weeks. Comparisons across three age groups revealed that younger workers, particularly between the ages of 15–18, reported more frequent microaccidents, less safety voice, less safety compliance, and more safety neglect than workers aged 19–22. This pattern of results also held for comparisons between workers in 19–22 and 23–25 age groups, except for safety voice which did not differ between these two older age groups. In terms of gender, males and females reported the same frequency of microaccidents, but males reported more safety voice, more safety compliance, and more safety neglect than females did. The results and limitations of the present study are discussed.ConclusionFrequency of microaccidents and safety behavior vary among young worker age sub-groups.