Injury severity related to overturn characteristics of tractors

Introduction

Early studies of injuries associated with overturns indicate that more fatalities occurred when a tractor overturned beyond 90° (continuous roll) relative to the impact plane. Recently, the principle of preventing continuous rolls has re-emerged for the protection of riding lawnmower operators.

Method

Related to tractors, a population-based study was conducted that compared the severity of fatal and nonfatal injuries between a 90° and continuous roll for tractors equipped with rollover protective structures (ROPS) and not equipped with a ROPS (non- ROPS). In 2002, the Kentucky Farm Tractor Overturn Survey was administered to an 8% random sample (6,063) of Kentucky farm operators. The farmers responded to questions that differentiated between the types of overturns and operator injury outcomes for ROPS-equipped and non-ROPS tractors during overturn events. Overturn characteristics were collected that included 90° to the side, beyond 90° to the side, and to the rear for both ROPS-equipped and non-ROPS tractors.

Results

Of the 541 overturns reported in this study, 535 (99%) of the respondents reported the most recent overturn characteristics of the tractor: 92 (17%) were ROPS-equipped and 443 (83%) were non-ROPS. For side overturns, 67% of the rolls occurred with ROPS-equipped tractors, and 54% occurred with non-ROPS tractors. The percentages of deaths related to rolls to the side for ROPS-equipped and non-ROPS tractors were, respectively, 1.6% and 3.7%. There was one (2%) deaths related to 90° rolls for ROPS-equipped tractors, whereas for continuous rolls there were 6.4% fatalities related to side overturns, 13% resulted in non-fatal injuries with an average of 1 day of hospitalization for ROPS-equipped tractors, and 39% resulted in non-fatal injuries with an average of 18 days of hospitalization for non-ROPS tractors. The results from this study indicated that a ROPS was more effective at stopping an overturn at 90° than no ROPS, with an associated reduction in the severity of injury in the event of a tractor overturn.     

[Case Study] CityCenter and Cosmopolitan Construction Projects, Las Vegas, Nevada: Lessons learned from the use of multiple sources and mixed methods in a safety needs assessment

Problem

The present study describes a response to eight tragic deaths over an eighteen month times span on a fast track construction project on the largest commercial development project in U.S. history.

Methods

Four versions of a survey were distributed to workers, foremen, superintendents, and senior management. In addition to standard Likert-scale safety climate scale items, an open-ended item was included at the end of the survey.

Results

Safety climate perceptions differed by job level. Specifically, management perceived a more positive safety climate as compared to workers. Content analysis of the open-ended item was used to identify important safety and health concerns which might have been overlooked with the qualitative portion of the survey.

Discussion

The surveys were conducted to understand workforce issues of concern with the aim of improving site safety conditions. Such efforts can require minimal investment of resources and time and result in critical feedback for developing interventions affecting organizational structure, management processes, and communication.

Summary

The most important lesson learned was that gauging differences in perception about site safety can provide critical feedback at all levels of a construction organization.

Impact on the Industry

Implementation of multi-level organizational perception surveys can identify major safety issues of concern. Feedback, if acted upon, can potentially result in fewer injuries and fatal events.     

The relationship between recruitment processes, familiarity, trust, perceived risk and safety

Introduction and Method

Participants′ perceptions of the safety-related aspects of their organization′s recruitment processes were examined, as were their perceptions of safety aspects associated with new recruits.

Results

One hundred and fifty-four professional fire fighters indicated the trust they held in the safety-related aspects of their organizations′ selection and pre-start training. Perceived trust in pre-start training was negatively correlated (r = -.24, p < .01) with the risk associated with new recruits, and positively correlated (r = .50, p < .01) with ratings of trust in recruits to immediately work safely. Furthermore, trust in recruits to immediately work safely was negatively correlated (r = -.21, p < .01) with crews′ safety behavior toward recruits.

Conclusions

These results are interpreted as particularly dangerous for workers, as new recruits lack familiarity with aspects of their new workplace that cannot be addressed by either selection or pre-start training, making them a risk.

Impact on Industry

Organizations should actively identify new recruits, and encourage existing team members not to immediately trust new recruits to work safely.     

Predicting driver drowsiness using vehicle measures: Recent insights and future challenges

Introduction

Driver drowsiness is a significant contributing factor to road crashes. One approach to tackling this issue is to develop technological countermeasures for detecting driver drowsiness, so that a driver can be warned before a crash occurs.

Method

The goal of this review is to assess, given the current state of knowledge, whether vehicle measures can be used to reliably predict drowsiness in real time.

Results

Several behavioral experiments have shown that drowsiness can have a serious impact on driving performance in controlled, experimental settings. However, most of those studies have investigated simple functions of performance (such as standard deviation of lane position) and results are often reported as averages across drivers, and across time.

Conclusions

Further research is necessary to examine more complex functions, as well as individual differences between drivers.

Impact on Industry

A successful countermeasure for predicting driver drowsiness will probably require the setting of multiple criteria, and the use of multiple measures.     

Have government regulations improved workplace safety? : A test of the asynchronous regulatory effects in China's coal industry, 1995-2006

Problem

Empirical studies on the effectiveness of workplace safety regulations are inconclusive. This study hypothesizes that the asynchronous effects of safety regulations occur because regulations need time to become effective. Safety regulations will work initially by reducing the most serious accidents, and later by improving overall safety performance.

Method

The hypothesis is tested by studying a provincial level aggregate panel dataset for China's coal industry using two different models with different sets of dependent variables: a fixed-effects model on mortality rate, which is defined as fatalities per 1,000 employees; and a negative binominal model on the annual number (frequency) of disastrous accidents.

Results

Safety regulations can reduce the frequency of disastrous accidents, but have not reduced mortality rate, which represents overall safety performance.

Discussion and summary

Policy recommendations are made, including shifting production from small to large mines through industrial consolidation, improving the safety performance of large mines, addressing consequences of decentralization, and facilitating the implementation of regulations through carrying on institutional actions and supporting legislation.

Impact on industry

Until recently, about 4,000 coal miners perished annually in China, demonstrating that workplace safety in China's coal industry is an urgent and important issue. This research provides evidence that safety regulations have asynchronous effects and identifies the priorities in improving safety in China's current coal mining. This may assist the Chinese government to design more effective safety improvement policies and improve the effectiveness of safety regulations and safety performance.     

Is a hands-free phone safer than a handheld phone?

Introduction

Although it is becoming more and more accepted that driving while talking on a cell phone can be hazardous, most jurisdictions are making handheld phone use illegal while allowing hands-free phone use.

Methods

The scientific literature exploring the effects of these two types of cell phone use on driving and driving-related performance is reviewed here.

Results

Our review shows that talking on the phone, regardless of phone type, has negative impacts on performance especially in detecting and identifying events. Performance while using a hands-free phone was rarely found to be better than when using a handheld phone. Some studies found that drivers compensate for the deleterious effects of cell phone use when using a handheld phone but neglect to do so when using a hands-free phone.

Impact on Industry

Current research does not support the decision to allow hands-free phone use while driving.     

Are drivers' comparative risk judgments about speeding realistic?

Introduction

This study focused on comparative judgments about speeding risks among young drivers who have a high risk of being involved in a traffic accident.

Method

We examined (a) how these drivers assess their risk of sanctions and their risk of causing an automobile crash because of speeding in comparison to the estimated risks of other drivers, and (b) how realistic their comparative risk judgments are. We measured the relationship between the drivers' comparative risk judgments, self-reported speeding, and driving-related sensation-seeking. We hypothesized that (a) they would think they have less risk of sanctions and of causing a car accident than others, and (b) their comparative judgments of speeding risks would be linked to self-reported speeding and driving-related sensation-seeking. The study was based on a computerized questionnaire survey conducted with 3,002 young drivers (mean age = 22.3) administered by professional investigators.

Results

The results confirmed our hypotheses.

Impact on Industry

In order to improve the effectiveness of prevention measures and to evaluate the effect of them, road-safety interventions should take into account comparative risk judgments about the targeted risk behavior.     

The conspicuity of first-responder safety garments

Introduction

This study compared the conspicuity of three types of first-responder safety garments (NFPA 1971-2007 turnout gear coats, and ANSI/ISEA 107 and 207 safety vests).

Method

Participants drove instrumented vehicles on a closed track during both daytime and nighttime, indicating when they could first detect pedestrians in a simulated emergency response scene. Pedestrians wore one of the safety garments and stood on either side of the emergency scene, facing or perpendicular to oncoming traffic, and either stationary or walking in place.

Results

All three garment standards provided equal levels of conspicuity, in that the distances at which the pedestrians were detected were equivalent. Time of day was a significant factor, with longer mean detection distances being observed in daytime. Pedestrian orientation was significant, with mean detection distances being longest when facing traffic. Pedestrian motion did not result in significant differences in detection distance.

Discussion

The results suggest that all three garment types studied are equivalent in making first responders conspicuous as pedestrians when working an emergency response scene in close proximity to traffic.

Impact on Industry

Whether an NFPA or ANSI/ISEA compliant is worn, first responders are equally likely to be detected by passing motorists, and as such these garments should be considered to be equivalent.     

Fatal crash trends for Australian young drivers 1997-2007: Geographic and socioeconomic differentials

Background

Little has been published on changes in young driver fatality rates over time. This paper examines differences in Australian young driver fatality rates over the last decade, examining important risk factors including place of residence and socioeconomic status (SES).

Methods

Young driver (17-25 years) police-recorded passenger vehicle crashes were extracted from New South Wales State records from 1997-2007. Rurality of residence and SES were classified into three levels based on drivers’ residential postcode: urban, regional, or rural; and high, moderate, or low SES areas. Geographic and SES disparities in trends of fatality rates were examined by the generalized linear model. Chi-square trend test was used to examine the distributions of posted speed limits, drinking driving, fatigue, seatbelt use, vehicle age, night-time driving, and the time from crash to death across rurality and socioeconomic status.

Results

Young driver fatality rate significantly decreased 5% per year (p < 0.05); however, stratified analyses (by rurality and by SES) showed that only the reduction among urban drivers was significant (average 5% decrease per year, p < 0.01). The higher relative risk of fatality for rural versus urban drivers, and for drivers of low versus high SES remained unchanged over the last decade. High posted speed limits, fatigue, drink driving and seatbelt non-use were significantly associated with rural fatalities, whereas high posted speed limit, fatigue, and driving an older vehicle were significantly related to low SES fatality.

Conclusion

The constant geographic and SES disparities in young driver fatality rates highlight safety inequities for those living in rural areas and those of low SES. Better targeted interventions are needed, including attention to behavioral risk factors and vehicle age.     

An epidemiologic comparison of injuries presenting to a pediatric emergency department and local urgent care facilities

Problem

The objective of this study was to compare the epidemiology of injuries presenting to emergency department (ED) and urgent care (UC) facilities of a single, NEISS-affiliated hospital.

Method

Patient medical records (n = 36,811) were used to compare injury incidence, injury characteristics, and demographic characteristics between the ED, on-site UC, and off-site UC during 2006.

Results

ED presentations were more likely to be open wounds and motor vehicle-related compared to on-site UC presentations. ED presentations were more likely to be system wide/late effects, be made by an African American, or be paid through Medicaid compared to off-site UC presentations. On-site UC presentations were more likely to be made by an African American or be paid through Medicaid compared to off-site UC presentations.

Discussion

ED and UC injury characteristics and patient demographics differ. With no nationally-representative UC injury surveillance, current research likely underestimates injury incidence and presents skewed profiles. Impact on Industry: This article adds insight into the generalizability of ED-based injury surveillance to UC injuries.     

Analysis of bus collision and non-collision incidents using transit ITS and other archived operations data

Introduction

This paper analyzes factors contributing to bus operations safety incidents at TriMet, the transit provider for the Portland Oregon metropolitan region.

Method

The analysis focuses on 4,631 collision and non-collision incidents that occurred between 2006 and 2009. Empirical analysis of these incidents draws on a wide array of operator-level data recovered by transit ITS technologies in combination with information from TriMet's human resources, scheduling, and customer relations databases. Incident frequencies are estimated in relation to operators' demographic characteristics, employment status, assigned work characteristics, service delivery and performance indicators, temporal factors, and customer information.

Results

Apart from identifying factors that are empirically related to the frequency of safety incidents, the findings offer insights into operations policies and practices that hold promise for improving safety.

Impact on Industry

Potential for safety improvement based on analysis of archived operations and human resource data.     

Comparison of risk factors for falls from height between commercial and residential roofers

Introduction

The purpose of this investigation was to compare commercial roofers and residential roofers in terms of their behaviors, beliefs, working conditions, and attitudes toward the use of fall protection devices, which could lead to fall accidents.

Methods

A cross-sectional sample of 252 roofers participated in the survey in the Midwest (Wisconsin, Illinois, Michigan, Indiana, and Iowa).

Results

Residential roofers were more likely to fall (adjusted prevalence ratio = 1.57, 95% CI = 0.86, 2.27) than commercial roofers. Existence of fall protection programs, enforcement of fall protection device use, actual use of fall protection devices, work type, company size, and race/ethnicity were significantly associated with fall accidents.

Impact on industry

This study adds insight into fall accidents from roofs in the construction industry and provides industry-specific cautions against fall accidents that can be reflected in regulatory agency implementation.     

Self-assessed driver competence among novice drivers - a comparison of driving test candidate assessments and examiner assessments in a Dutch and Finnish sample

Problem

This study examined novice drivers’ overconfidence by comparing their self-assessed driver competence with the assessments made by driving examiners.

Method

A Finnish (n = 2,739) and a Dutch sample (n = 239) of drivers license candidates assessed their driver competence in six areas and took the driving test.

Result and Discussion

In contrast to previous studies where drivers have assessed their skill in comparison to the average driver, a smaller proportion overestimated and a larger proportion made realistic self-assessments of their driver competence in the present study, where self-assessments were compared with examiner assessments. Between 40% and 50% of the candidates in both samples made realistic assessments and 30% to 40% overestimated their competence. The proportion of overestimation was greater in the Dutch than in the Finnish sample, which might be explained by greater possibilities for practicing self-assessment in the Finnish driver education system. Similar to other self-assessment studies that indicate that incompetence is related to overestimation, a larger proportion of candidates that failed the test overestimated their skill compared to those who passed. In contrast to other studies, males did not overestimate their skills more than females, and younger driver candidates were not more overconfident than older drivers.

Impact on traffic safety

Although a great proportion of the candidates made a realistic assessment of their own driver competence, overestimation is still a problem that needs to be dealt with. To improve the accuracy of novice drivers’ self-assessment, methods for self-assessment training should be developed and implemented in the driver licensing process.     

Overhead drilling: Comparing three bases for aligning a drilling jig to vertical

Problem

Drilling overhead into concrete or metal ceilings is a strenuous task done by construction workers to hang ductwork, piping, and electrical equipment. The task is associated with upper body pain and musculoskeletal disorders. Previously, we described a field usability evaluation of a foot lever and inverted drill press intervention devices that were compared to the usual method for overhead drilling. Both interventions were rated as inferior to the usual method based on poor setup time and mobility.

Method

Three new interventions, which differed on the design used for aligning the drilling column to vertical, were compared to the usual method for overhead drilling by commercial construction workers (n = 16).

Results

The usual method was associated with the highest levels of regional body fatigue and the poorest usability ratings when compared to the three interventions.

Conclusion

Overall, the 'Collar Base' intervention design received the best usability ratings.

Impact on Industry

Intervention designs developed for overhead drilling may reduce shoulder fatigue and prevent subsequent musculoskeletal disorders. These designs may also be useful for other overhead work such as lifting and supporting materials (e.g., piping, ducts) that are installed near the ceiling. Workplace health and safety interventions may require multiple rounds of field-testing prior to achieving acceptable usability ratings by the end users.     

Injury crashes with bicyclists at roundabouts: influence of some location characteristics and the design of cycle facilities

Problem

Previous research indicated that conversions of intersections into roundabouts appear to increase the number of injury crashes with bicyclists. However, it was assumed that the effectiveness of roundabouts could vary according to some differences in design types of cycle, facilities and other geometrical factors.

Method

Regression analyses on effectiveness-indices resulting from a before-and-after study of injury crashes with bicyclists at 90 roundabouts in Flanders, Belgium.

Results

Regarding all injury crashes with bicyclists, roundabouts with cycle lanes appear to perform significantly worse compared to three other design types (mixed traffic, separate cycle paths, and grade-separated cycle paths). Nevertheless, an increase of the severest crashes was noticed, regardless of the design type of the cycle facilities. Roundabouts that are replacing signal-controlled intersections seem to have had a worse evolution compared to roundabouts on other types of intersections.

Impact on industry

The results might affect design guidelines for roundabouts, particularly for the accommodation of bicyclists.     

Falls from height during the floor slab formwork of buildings: Current situation in Spain

Problem

One of the phases with the highest risk of falls from a height in the construction of a building is during the floor slab formwork stage. This paper analyzes this particular risk, as well as the most frequently used fall-protection systems.

Method

A survey was carried out to define the current situation in Spain with regard to falls from a height during floor slab formwork and the fall-protection systems used to prevent such a risk.

Results

The results of the survey clarified the current situation in Spain with regard to this risk, and made it clear that there is considerable risk of falling from a height during the floor slab formwork stage.

Discussion

All the safety systems analyzed presented a series of weak points that should be studied in detail before they can be used on building sites.

Impact on industry

The risk of falling associated with floor slab formwork and the most frequently used protection systems are analyzed. As no research had been carried out to date on this type of risk, we consider the research presented in this article to be a pioneer in the field.     

A traffic safety evaluation of California's traffic violator school citation dismissal policy

Introduction

This study evaluated California's traffic violator school (TVS) citation dismissal policy.

Method

This study identified and compared two large samples of drivers either completing a TVS (N = 210,015) or convicted of a traffic citation (N = 168,563).

Results

Prior to adjudication, the TVS group had characteristics (e.g., lower prior conviction rate and smaller proportion of males) that were predictive of a lower subsequent crash risk. However, the TVS group exhibited significantly more crashes than did the convicted group in the subsequent one-year period. The difference (4.83%) increased to 10% after adjusting for the more favorable characteristics of the TVS group. The TVS group also had a higher adjusted subsequent crash rate at each prior driver record entry level, reflecting a loss in the general and specific deterrence of the non-conviction masked status of TVS dismissed citations. It was reported that the TVS dismissal policy results in approximately 12,300 additional crashes annually with economic costs of approximately $398,000,000.

Conclusions

The avoidance of licensing actions resulting from the dismissal policy assists in explaining why the driving public is exposed to an increased crash risk. A number of recommendations are offered to reduce the negative traffic safety impact of the TVS citation dismissal policy.     

Influence of daytime running lamps on visual reaction time of pedestrians when detecting turn indicators

Introduction

This article describes one experiment that studied the influence of Daytime Running Lamps (DRL) on pedestrian detection of turn indicators.

Method

An experimental device including one DRL and one turn indicator was used in order to determine Visual Reaction Times (VRT) of 148 observers in different situations involving turn indicator activation. Such situations were combinations of three main variables: color of DRL, separation between DRL and Turn Indicator, and observation angle.

Results

Significant changes in VRT were found depending on the configurations above, especially the observation angle and the color of DRL. This second result demonstrates that amber DRLs inhibit the detection of Turn Indicators.

Impact on industry

One of the main targets of this paper is to recommend that carmakers introduce only white DRLs on new vehicles. We also intend to advise regulatory bodies working on automotive regulation about the consequences of allowing amber DRLs and also about the danger of introducing constrains on the distance between DRL and Turn Indicator without further experimental evidences.