Investigating factors influencing drivers' speed selection behavior under reduced visibility conditions

Objective: Driving speed is a major concern for driving safety under reduced visibility conditions. Many factors affect speed selection in low visibility, but few studies have been conducted examining drivers' characteristics, particularly in China. The present study aimed to investigate the correlation between drivers' demographic information, driving ability, and speed choice in low-visibility conditions using a sample of Chinese drivers.

Methods: A self-designed driving ability scale was used to assess driving ability in reduced visibility conditions. The reliability and validity of 306 gathered questionnaires were examined in this article, and a structural equation model (SEM) was built to explore the predictors of drivers' speed selection behavior under reduced visibility conditions and to measure the relationships between various factors.

Results: Age and driving experience have no direct relationship to speed selection behavior in reduced visibility, but the frequency of using expressways and annual mileage are significantly related to the speed on roads that have a speed restriction of 80 or 120 km/h. Under reduced visibility conditions, driving ability has a significant effect on speed selection behavior, and driving skill (DS) is the most influential on speed selection behavior on roads with a speed limit of 120 km/h; otherwise, the effect of risk perception (RP) does not differ by speed choice on 3 roads with different speed limits. Driving speed in good weather also has a positive influence on speed selection behavior in low visibility.

Conclusion: Driving ability is directly associated with speed selection in reduced visibility conditions, and some demographic data indirectly influence speed selection. This study provides useful recommendations for drivers' training programs to reduce casualties from accidents in low-visibility conditions.     

A clustering approach to integrate traffic safety in road maintenance prioritization

Objectives: We combine data on roads and crash characteristics to identify patterns in road traffic crashes with regard to road characteristics. We illustrate how combined analysis of data regarding road maintenance, maintenance costs, road characteristics, crash characteristics, and geographical location can enrich road maintenance prioritization from a traffic safety perspective.

Methods: The study is based on traffic crash data merged with road maintenance data and annual average daily traffic (AADT) collected in Denmark. We analyzed 3,964 crashes that occurred from 2010 to 2015. A latent class clustering (LCC) technique was used to identify crash clusters with different road and crash characteristics. The distribution of crash severity and estimated road maintenance costs for each cluster was found and cluster differences were compared using the chi-square test. Finally, a map matching procedure was used to identify the geographical distribution of the crashes in each cluster.

Results: Results showed that based on road maintenance levels there was no difference in the distribution of crash severity. The LCC technique revealed 11 crash clusters. Five clusters were characterized by crashes on roads with a poor maintenance level (levels 4 and 3). Only a few of these crashes included a vulnerable road user (VRU) but many occurred on roads without barriers. Four clusters included a large share of crashes on acceptably maintained roads (level 2). For these clusters only small variations in road characteristics were found, whereas the differences in crash characteristics were more dominant. The last 2 clusters included crashes that mainly occurred on new roads with no need for maintenance (level 1). Injury severity, estimated maintenance costs, and geographical location were found to be differently distributed for most of the clusters.

Conclusions: We find that focusing solely on road maintenance and crash severity does not provide clear guidance of how to prioritize between road maintenance efforts from a traffic safety perspective. However, when combined with geographical location and crash characteristics, a more nuanced picture appears that allows consideration of different target groups and perspectives.     

A simulator study of driving behavior and mental workload in mixed-use arterial road environments

Objectives: Mixed-use urban environments, such as arterial roads with adjacent commercial land uses, represent crash locations with the highest risk. These locations are often characterized by high volumes of motor vehicle traffic, on-street parking, and interactions with multiple road user groups such as pedestrians, cyclists, and public transportation. The objective of this study was to investigate previously identified crash risk factors for mixed-use urban environments and assess how parking occupancy, center medians, and cyclist volume influence performance and workload in a driving simulator study.

Methods: Thirty participants were recruited for the study. Participants completed 6 drives that presented different combinations of cyclist volume, median condition, and parking occupancy. Incorporated into the simulator drives was a secondary peripheral detection task (PDT) designed to measure mental workload. Participants provided subjective assessments of workload using the Rating Scale Mental Effort (RSME).

Results: Mean lateral lane position was found to significantly vary across the 3 independent variables of parking occupancy, cyclist volume, and median conditions. No significant changes were identified for mean speed across the conditions. Subjective and objective measures of workload identified changes due to the presence of cyclists with slower reaction times for the PDT task when cyclists were present.

Conclusion: The findings provide insight into the interaction of road design elements in mixed-use urban road environments and demonstrate that increasingly complex environments increase driver demand. This has important road design implications for mixed-use arterial roads, which are often characterized by complex interactions between multiple road user groups.     

Fatally injured drivers in Norway 2005–2015—Trends in substance use and crash characteristics

Objective: Norway introduced a “Vision Zero” strategy in 2001, using multiple approaches, aiming toward a future in which no one will be killed or seriously injured in road traffic crashes (RTCs). Official statistics show that the number of fatally injured road users has declined substantially from 341 deaths in 2000 to 117 in 2015. In-depth crash investigations of all fatal RTCs started in Norway in 2005. The aim of this study was to investigate whether fatal crash characteristics, vehicle safety features, and prevalence of drugs and/or alcohol among fatally injured drivers and riders has changed during 2005–2015, accompanying the reduction in road fatalities.

Methods: Data on all car/van drivers and motorcycle/moped riders fatally injured in RTCs during 2005–2015 were extracted from Norwegian road traffic crash registries and combined with forensic toxicology data.

Results: The proportion of cars and motorcycles with antilock braking systems and cars with electronic stability control, increased significantly during the study period. The prevalence of nonuse of seat belts/helmets and speeding declined among both fatally injured drivers and riders. In addition, the prevalence of alcohol declined, though no significant change in the total prevalence of other substances was noted.

Conclusion: The observed changes toward more safety installations in cars and motorcycles and lower prevalence of driver-related risk factors like alcohol use, speeding, and nonuse of seat belts/helmets among fatally injured drivers/riders may have contributed to the decrease in road traffic deaths.     

Are sociodemographic characteristics and attitude good predictors of speeding behavior among drivers on Malaysia federal roads?

Objective: The increasing number of road crashes and fatalities on Malaysian federal roads is a cause for concern. The main causes of road crashes and fatalities on federal roads have been attributed to the speeding behavior among drivers. As such, this research investigates the possible predictors from sociodemographic characteristics and attitudes in predicting speeding behavior among drivers on Malaysia federal roads.

Methods: A face-to-face survey was conducted via purposive sampling on 300 drivers at rest areas at 6 crash hotspots on Malaysian federal roads. A set of questions related to speeding behavior was developed. The questionnaire consisted of 10 questions related to sociodemographic characteristics of the participants, 37 questions regarding attitudes toward speeding, and 1 question regarding speeding behavior. Subsequently, the sociodemographics were analyzed using binary logistic regression and the attitude variable was analyzed using factor analysis and binary logistic regression.

Results: The findings from the sociodemographic data revealed that male gender, single/separated status, broad driving experience, crash experience, and leisure/vacation trip purposes emerged as significant predictors for speeding behavior. Additionally, the results of factor analysis for the attitude variable revealed 3 components: Affective, behavioral, and cognitive. These 3 components are originally derived from the ABC model of attitude (affective, behavioral, and cognitive) that was adapted in this study. Furthermore, the findings from binary logistic regression appeared consistent with the model assumption, signifying that behavioral aspects significantly influenced speeding behavior among drivers. Nevertheless, affective and cognitive components were insignificant predictors. Furthermore, strong agreement with speeding countermeasures was observed among the participants.

Conclusion: In conclusion, sociodemographic characteristics and attitude have been proven to affect speeding behavior among drivers on Malaysian federal roads. The findings have important implications in designing driver risk profiles on federal roads to develop suitable countermeasures based on the 4E approach (engagement, education, enforcement, and engineering) to enhance road safety.     

Considering built environment and spatial correlation in modeling pedestrian injury severity

Objective: This study looks at mitigating and aggravating factors that are associated with the injury severity of pedestrians when they have crashes with another road user and overcomes existing limitations in the literature by focusing attention on the built environment and considering spatial correlation across crashes.

Method: Reports for 6,539 pedestrian crashes occurred in Denmark between 2006 and 2015 were merged with geographic information system resources containing detailed information about the built environment and exposure at the crash locations. A linearized spatial logit model estimated the probability of pedestrians sustaining a severe or fatal injury conditional on the occurrence of a crash with another road user.

Results: This study confirms previous findings about older pedestrians and intoxicated pedestrians being the most vulnerable road users and crashes with heavy vehicles and in roads with higher speed limits being related to the most severe outcomes. This study provides novel perspectives by showing positive spatial correlations of crashes with the same severity outcomes and emphasizing the role of the built environment in the proximity of the crash.

Conclusions: This study emphasizes the need for thinking about traffic calming measures, illumination solutions, road maintenance programs, and speed limit reductions. Moreover, this study emphasizes the role of the built environment, because shopping areas, residential areas, and walking traffic density are positively related to a reduction in pedestrian injury severity. Often, these areas have in common a larger pedestrian mass that is more likely to make other road users more aware and attentive, whereas the same does not seem to apply to areas with lower pedestrian density.     

Exploratory field trial of motorcycle autonomous emergency braking (MAEB): Considerations on the acceptability of unexpected automatic decelerations

Objective: Autonomous emergency braking (AEB) acts to slow down a vehicle when an unavoidable impending collision is detected. In addition to documented benefits when applied to passenger cars, AEB has also shown potential when applied to motorcycles (MAEB). However, the feasibility of MAEB as practically applied to motorcycles in the real world is not well understood.

Methods: In this study we performed a field trial involving 16 riders on a test motorcycle subjected to automatic decelerations, thus simulating MAEB activation. The tests were conducted along a rectilinear path at nominal speed of 40 km/h and with mean deceleration of 0.15 g (15% of full braking) deployed at random times. Riders were also exposed to one final undeclared brake activation with the aim of providing genuinely unexpected automatic braking events.

Results: Participants were consistently able to manage automatic decelerations of the vehicle with minor to moderate effort. Results of undeclared activations were consistent with those of standard runs.

Conclusions: This study demonstrated the feasibility of a moderate automatic deceleration in a scenario of motorcycle travelling in a straight path, supporting the notion that the application of AEB on motorcycles is practicable. Furthermore, the proposed field trial can be used as a reference for future regulation or consumer tests in order to address safety and acceptability of unexpected automatic decelerations on a motorcycle.     

Using medico-legal data to investigate fatal older road user crash circumstances and risk factors

Objective: This study used medico-legal data to investigate fatal older road user (ORU, aged 65 years and older) crash circumstances and risk factors relating to 4 key components of the Safe System approach (e.g., roads and roadsides, vehicles, road users, and speeds) to identify areas of priority for targeted prevention activity.

Method: The Coroners' Court of Victoria's (CCOV) Surveillance Database was searched to identify and describe the frequency and rate per 100,000 population of fatal ORU crashes in the Australian state of Victoria for 2013–2014. Information relating to the deceased ORU, crash characteristics and circumstances, and risk factors was extracted and analyzed.

Results: One hundred and thirty-eight unintentional fatal ORU crashes were identified in the CCOV Surveillance Database. Of these fatal ORU crashes, most involved older drivers (44%), followed by older pedestrians (32%), older passengers (17%), older pedal cyclists (4%), older motorcyclists (1%), and older mobility scooter users (1%). The average annual rate of fatal ORU crashes per 100,000 population was 8.1 (95% confidence interval [CI], 6.0–10.2). In terms of the crash characteristics and circumstances, most fatal ORU crashes involved a counterpart (98%), of which the majority were passenger cars (50%) or fixed/stationary objects (25%), including trees (46%) or embankments (23%). In addition, most fatal ORU crashes occurred close to home (73%), on-road (87%), on roads that were paved (94%), on roads with light traffic volume (37%), and during low-risk conditions: between 12 p.m. and 6 p.m. (44%), on weekdays (80%), during daylight (75%), and under dry/clear conditions (81%). Road user (RU) error was identified by the police and/or the coroner for the majority of fatal crashes (55%), with a significant proportion of deceased ORUs deemed to have failed to yield (54%) or misjudged (41%).

Conclusions: RU error was the most significant factor identified in fatal ORU crashes, which suggests that there is a limited capacity of the road system to fully accommodate RU errors. Initiatives related to safer roads and roadsides, vehicles, speed zones, as well as behavioral approaches are key areas of priority for targeted activity to prevent fatal ORU crashes in the future.     

Young females' attention toward road safety images: An ERP study of the revised reinforcement sensitivity theory

Objective: This study examined whether reward and punishment sensitivities, as conceptualized by Gray and McNaughton's revised reinforcement sensitivity theory (RST), influenced young female drivers' attention toward a series of positive and negative antispeeding advertisement images. Young females' increasing crash risk is associated with their engagement in risky behaviors, which, in turn, has been associated with a stronger behavioral approach system (BAS; sensitive to rewards). It was predicted that individuals with a stronger BAS would elicit larger N100 and N200 mean amplitudes (reflecting greater attention) toward the positive images. Similar associations were predicted in relation to the fight–flight–freeze system (FFFS; sensitive to punishments) for negative images.

Method: Twenty-four female drivers (17–25 years; final N = 16) completed Corr-Cooper's RST-Personality Questionnaire, prior to undergoing an event-related potential computerized visual task (i.e., oddball paradigm) that included positive, negative, and neutral images as targets against checkerboard image distractors.

Results: Contrary to expectations, individuals with a stronger BAS (Reward Reactivity and Impulsivity) demonstrated significantly larger N200 mean amplitudes at the Cz electrode site on presentation of the negative images than those with a weaker BAS. No other significant RST effects were found.

Conclusions: These findings provide some preliminary objective support for the use of negative emotion-based road safety advertisements for young females. Further, this study provides support for using psychophysiological measures to enhance understanding of traffic injury persuasion.     

A study of fatal pedestrian crashes at rural low-volume road intersections in southwest China

Objective: Although intersections correspond to a small proportion of the entire roadway system, they account for a disproportionally high number of fatal pedestrian crashes, especially on rural roads situated in low- and middle-income countries. This article examines pedestrian safety at rural intersections and suggests applicable accident prevention treatments by providing an in-depth analysis of 28 fatal pedestrian crashes from 8 low-volume roads in southwest China.

Methods: The driving reliability and error analysis method (DREAM) is a method to support a systematic classification of accident causation information and to facilitate aggregation of that information into patterns of contributing factors. This is the first time that DREAM was used to analyze pedestrian–vehicle crashes and provide suggestions for road improvements in China.

Results: The key issues adversely affecting pedestrian safety can be organized in 4 distinctive thematic categories, namely, deficient intersection safety infrastructure, lack of pedestrian safety education, inadequate driver training, and insufficient traffic law enforcement. Given that resources for traffic safety investments in rural areas are limited, it is determined that the potential countermeasures should focus on low-cost, easily implementable, and long-lasting measures increasing the visibility and predictability of pedestrian movement and reducing speeding and irresponsible driving among drivers and risk-taking behaviors among pedestrians.

Conclusions: Accident prevention treatments are suggested based on their suitability for rural areas in southwest China. These countermeasures include introducing better access management and traffic calming treatments, providing more opportunities for pedestrian education, and enhancing the quality of driver training and traffic law enforcement.     

Suicide by crashing into a heavy vehicle: Focus on professional drivers using in-depth crash data

Objective: Road traffic suicides typically involve a passenger car driver crashing his or her vehicle into a heavy vehicle, because death is almost certain due to the large mass difference between these vehicles. For the same reason, heavy-vehicle drivers typically suffer minor injuries, if any, and have thus received little attention in the research literature. In this study, we focused on heavy-vehicle drivers who were involved as the second party in road suicides in Finland.

Methods: We analyzed 138 road suicides (2011–2016) involving a passenger car crashing into a heavy vehicle. We used in-depth road crash investigation data from the Finnish Crash Data Institute.

Results: The results showed that all but 2 crashes were head-on collisions. Almost 30% of truck drivers were injured, but only a few suffered serious injuries. More than a quarter reported sick leave following their crash. Injury insurance compensation to heavy-vehicle drivers was just above €9,000 on average. Material damage to heavy vehicles was significant, with average insurance compensation paid being €70,500. Three out of 4 truck drivers reported that drivers committing suicide acted abruptly and left them little opportunity for preventive action.

Conclusions: Suicides by crashing into heavy vehicles can have an impact on drivers’ well-being; however, it is difficult to see how heavy-vehicle drivers could avoid a suicide attempt involving their vehicle.     

Motorcycle active safety systems: Assessment of the function and applicability using a population-based crash data set

Objective: Motorcycles and mopeds, often referred to as powered 2-wheelers (PTWs), play an important role in personal mobility worldwide. Despite their advantages, including low cost, space occupancy, and fuel efficiency, the risk of sustaining serious or fatal injuries is higher than that for occupants of passenger cars. The development of safety systems specific for PTWs represents a potential way to reduce casualties among riders. With the proliferation of new active and passive safety technologies, the question as to which might offer the most value is important. In this context, a prioritization process was applied to a set of PTW active safety systems to evaluate their applicability to crash scenarios alone and in combination. The systems included in the study were antilock braking (ABS), autonomous emergency braking (AEB), collision warning, curve warning, and curve assist.

Methods: With the functional performance of the 5 safety systems established, the relevance of each system to specific crash configurations and vehicle movements defined by a standardized accident classification system used in Victoria, Australia, was rated by 2 independent reviewers, with a third reviewer acting as a moderator where disagreements occurred. Ratings ranged from 1 (definitely not applicable) to 4 (definitely applicable). Using population-based crash data, the number and percentage of crashes that each safety system could potentially influence, or be relevant for, was defined. Applying accepted injury costs permitted the derivation of the societal economic cost of PTW crashes and the potential reductions associated with each safety system given a theoretical crash avoidance effectiveness of 100%.

Results: In the 12-year period 2000–2011, 23,955 PTW riders and 1292 pillion passengers were reported to have been involved in a road crash, with over 500 killed and more than 10,000 seriously injured; only 3.5% of riders/pillion passengers were uninjured. The total economic cost associated with these injured riders and pillion passengers was estimated to be AU$11.1 billion (US$7.70 billion; €6.67 billion). The 5 safety systems, as single solutions or in combination, were relevant to 57% of all crashes and to 74% of riders killed. Antilock braking was found to be relevant to the highest number of crashes, with incremental increases in coverage when combined with other safety systems.

Conclusions: The findings demonstrate that ABS, alone and in combination with other safety systems, has the potential to mitigate or possibly prevent a high percentage of PTW crashes in the considered setting. Other safety systems can influence different crash scenarios and are also recommended. Given the high cost of motorcycle crashes and the increasing number of PTW safety technologies, the proposed approach can be used to inform the process of selection of the most suitable interventions to improve PTW safety.     

Road traffic injuries among riders of electric bike/electric moped in southern China

Objective: Electric bike/moped-related road traffic injuries have become a burgeoning public health problem in China. The objective of this study was to identify the prevalence and potential risk factors of electric bike/moped-related road traffic injuries among electric bike/moped riders in southern China.

Methods: A cross-sectional study was used to interview 3,151 electric bike/moped riders in southern China. Electric bike/moped-related road traffic injuries that occurred from July 2014 to June 2015 were investigated. Data were collected by face-to-face interviews and analyzed between July 2015 and June 2017.

Results: The prevalence of electric bike/moped-related road traffic injuries among the investigated riders was 15.99%. Electric bike/moped-related road traffic injuries were significantly associated with category of electric bike (adjusted odds ratio [AOR] = 1.36, 95% confidence interval [CI], 1.01–1.82), self-reported confusion (AOR = 1.77, 95% CI, 1.13–2.78), history of crashes (AOR = 6.14, 95% CI, 4.68–8.07), running red lights (AOR = 3.57, 95% CI, 2.42–5.25), carrying children while riding (AOR = 1.96, 95% CI, 1.37–2.85), carrying adults while riding (AOR = 1.68, 95% CI, 1.23–2.28), riding in the motor lane (AOR = 2.42, 95% CI, 1.05–3.93), and riding in the wrong traffic direction (AOR = 1.63, 95% CI, 1.13–2.35). In over 77.58% of electric bike/moped-related road traffic crashes, riders were determined by the police to be responsible for the crash. Major crash-causing factors included violating traffic signals or signs, careless riding, speeding, and riding in the wrong lane.

Conclusion: Traffic safety related to electric bikes/moped is becoming more problematic with growing popularity compared with other 2-wheeled vehicles. Programs need to be developed to prevent electric bike/moped-related road traffic injuries in this emerging country.     

Evaluation of the safety performance of highway alignments based on fault tree analysis and safety boundaries

Objectives: To overcome the limitations of previous highway alignment safety evaluation methods, this article presents a highway alignment safety evaluation method based on fault tree analysis (FTA) and the characteristics of vehicle safety boundaries, within the framework of dynamic modeling of the driver–vehicle–road system.

Methods: Approaches for categorizing the vehicle failure modes while driving on highways and the corresponding safety boundaries were comprehensively investigated based on vehicle system dynamics theory. Then, an overall crash probability model was formulated based on FTA considering the risks of 3 failure modes: losing steering capability, losing track-holding capability, and rear-end collision.

Results: The proposed method was implemented on a highway segment between Bengbu and Nanjing in China. A driver–vehicle–road multibody dynamics model was developed based on the 3D alignments of the Bengbu to Nanjing section of Ning-Luo expressway using Carsim, and the dynamics indices, such as sideslip angle and, yaw rate were obtained. Then, the average crash probability of each road section was calculated with a fixed-length method. Finally, the average crash probability was validated against the crash frequency per kilometer to demonstrate the accuracy of the proposed method. The results of the regression analysis and correlation analysis indicated good consistency between the results of the safety evaluation and the crash data and that it outperformed the safety evaluation methods used in previous studies.

Conclusion: The proposed method has the potential to be used in practical engineering applications to identify crash-prone locations and alignment deficiencies on highways in the planning and design phases, as well as those in service.     

A multinomial logit analysis of factors associated with severity of motorcycle crashes in Ghana

Objective: The objective of this study was to explore the factors affecting motorcycle crash severity in Ghana.

Methods: A retrospective analysis of motorcycle crash data between 2011 and 2015 was conducted using a motorcycle crash data set extracted from the National Road Traffic Crash Database at the Building and Road Research Institute (BRRI) in Ghana. Injury severity was classified into 4 categories: Fatal, hospitalized, injured, and damage only. A multinomial logit modeling framework was used to identify the possible determinants of motorcycle crash severity.

Results: During the study period, a total of 8,516 motorcycle crashes were recorded, of which 22.9% were classified as fatal, 42.1% were classified as hospitalized injuries, 29.4% were classified as slight injuries, and 5.6% were classified as damage-only crashes. The estimation results indicate that the following factors increase the probability of fatal injuries: At a junction; weekend; signage; poor road shoulder; village settlement; tarred and good road surface; and collision between motorcycle and heavy goods vehicle (HGV). Motorcycle crashes occurring during the daytime and on the weekend increases the probability of hospitalized injury. The results also suggest that motorcycle crashes occurring during the daytime, in curves or inclined portions of roads, or in unclear weather conditions decrease the probability of fatal injury.

Conclusions: This study provides further empirical evidence to support motorcycle crash modeling research, which is lacking in developing countries. The ability to understand the various factors that influence motorcycle crash severity is a step forward in providing an appropriate basis upon which informed motorcycle crash policies can be developed. Particular attention should be given to the provision of road signage at junctions and speed humps and controlling traffic during the weekend. In addition, road maintenance should be carried out periodically to address motorcycle safety in Ghana.     

Parental supervision and discomfort with children walking to school in low-income communities in Cape Town,South Africa

Objective: The risk of pedestrian injury is compounded for children living in low-income communities due to factors such as poor road and pedestrian infrastructure, reliance on walking as a means of transport, and compromised supervision. Parents play an important role in child pedestrian safety. The primary objective of this study was to examine the effects of child pedestrian variables on parental discomfort with regard to letting their child walk to and from school and on the frequency of adult supervision.

Methods: A cross-sectional study was conducted using a convenience sample from 3 schools participating in a pedestrian safety school initiative. The schools are situated in low-income, high-risk communities in the City of Cape Town. A parent survey form was translated into isiXhosa and sent home with learners to those parents who had consented to participate. The response rate was 70.4%, and only parents of children who walk to and from school were included in the final sample (n = 359). Child pedestrian variables include the time taken to walk to school, parental rating of the child's ability to safely cross the road, and the frequency of adult supervision.

Results: More than half of parents reported that their child walked to and from school without adult supervision. About 56% of children took less than 20 min to walk to school. Most parents (61%) were uncomfortable with their child walking to school, although the majority of parents (55.7%) rated their child's ability to cross the road safely as better or significantly better than average (compared to peers). The parents did not perceive any differences in pedestrian risk factors between boys and girls or between younger (6–9 years) and older (10–15 years) children. The time spent by a child walking to school and parents' perceptions of their child's road-crossing ability were found to be significant predictors of parental discomfort (in letting their child walk). Younger children and children who spent less time walking were more likely to be supervised by an adult.

Conclusions: Many South African schoolchildren have to navigate the roads without adult supervision from a young age. Caregivers, especially in low-income settings, often have limited options with regard to getting their child to school safely. Regardless of the child's age and gender, the time that they spend on the roads is an important factor for parents in terms of pedestrian safety.     

Features of fatal injuries in older cyclists in vehicle–bicycle accidents in Japan

Objective: The purpose of this study was to identify and better understand the features of fatal injuries in cyclists aged 75 years and over involved in collisions with either hood- or van-type vehicles.

Methods: This study investigated the fatal injuries of cyclists aged 75 years old and over by analyzing accident data. We focused on the body regions to which the fatal injury occurred using vehicle–bicycle accident data from the Institute for Traffic Accident Research and Data Analysis (ITARDA) in Japan. Using data from 2009 to 2013, we examined the frequency of fatally injured body region by gender, age, and actual vehicle travel speed. We investigated any significant differences in distributions of fatal injuries by body region for cyclists aged 75 years and over using chi-square tests to compare with cyclists in other age groups. We also investigated the cause of fatal head injuries, such as impact with a road surface or vehicle.

Results: The results indicated that head injuries were the most common cause of fatalities among the study group. At low vehicle travel speeds for both hood- and van-type vehicles, fatalities were most likely to be the result of head impacts against the road surface.

The percentage of fatalities following hip injuries was significantly higher for cyclists aged 75 years and over than for those aged 65–74 or 13–59 in impacts with hood-type vehicles. It was also higher for women than men in the over-75 age group in impacts with these vehicles.

Conclusions: For cyclists aged 75 years and over, wearing a helmet may be helpful to prevent head injuries in vehicle-to-cyclist accidents. It may also be helpful to introduce some safety measures to prevent hip injuries, given the higher level of fatalities following hip injury among all cyclists aged 75 and over, particularly women.     

Effect of alcohol use on accelerating and braking behaviors of drivers

Objective: The present study examines the accelerating and braking behaviors of drivers at different blood alcohol concentrations (BACs) in heterogeneous driving conditions using driving simulator experiments.

Methods: Eighty-two licensed drivers performed simulated driving in a rural road environment designed in the driving simulator at 4 BAC levels: 0.00, 0.03, 0.05, and 0.08%. Driving performance was analyzed using vehicle control variables such as mean acceleration and mean brake pedal force. Generalized linear mixed models were developed to quantify the effect of different alcohol levels and explanatory variables such as driver’s age, gender, and other factors on the driving performance indicators.

Results: Alcohol use was reported as a significant factor affecting the accelerating and braking performance of drivers. The acceleration model results indicated that drivers’ mean acceleration increased by 0.013, 0.026, and 0.027 m/s² for BAC levels of 0.03, 0.05, and 0.08%, respectively. Results of the brake pedal force model showed that drivers’ mean brake pedal force increased by 1.09, 1.32, and 1.44 N for BAC levels of 0.03, 0.05, and 0.08%, respectively. Age was a significant factor in both the models where a 1-year increase in driver age resulted in a 0.2% reduction in mean acceleration and a 19% reduction in mean brake pedal force. Driving experience could compensate for the negative effects of alcohol to some extent while driving.

Conclusions: The findings of the present study revealed that drivers tend to be more aggressive and impulsive under the influence of alcohol, which deteriorates their driving performance. Impairment in accelerating and braking behaviors of drivers under the influence of alcohol leads to increased crash probabilities. The conclusions may provide reference in making countermeasures against drinking and driving and contribute to traffic safety.     

Evaluating the impact of criminalizing drunk driving on years of life lost due to road traffic deaths in one megacity,China

Objective: Road safety is an important public health issue worldwide. However, few studies have analyzed the association between criminalizing drunk driving and years of life lost (YLL) due to road traffic deaths (RTDs). Our study can provide useful information about this policy.

Methods: We used interrupted time-series analysis to find the changes in monthly YLL and RTD before and after law enforcement began using RTD data from 2008 to 2014 in Tianjin.

Results: After adjustment for seasonality, months, holidays, and the number of people in each district, criminalizing drunk driving was followed by a 11.1% (95% confidence interval [CI], 1.1–21.1%) reduction in risk of RTDs and a corresponding 778.1-year (95% CI, 200–1,355.1) reduction in monthly YLL. The reduction in YLL was especially significant among males, those aged 16–64 years old, and suburban residents.

Conclusions: This study highlights that the law can lead to a reduction in YLL due to RTDs in Tianjin, China. Large immediate public health benefits resulted from the new road traffic law in China. YLL provides a complementary measure for examining the effect of criminalization on drunk driving RTDs.     

Trends and patterns in fatal US motorcycle crashes, 2000–2016

Objective: To investigate trends of motorcyclist fatalities and identify at-risk populations by motorcyclist demographics and crash characteristics.

Methods: We used the Fatality Analysis Reporting System (FARS) database (2000–2016) to track fatality rate trends, which were quantified by using Poisson mixed-effects regression models comparing 2000–2001 and 2007–2008, as well as 2009–2010 and 2015–2016.

Results: The overall fatality rate per 100,000 population increased from 2000 to 2016, defined by two trend lines—before and after the economic recession in 2008–2009. The overall fatality rate ratio between 2000–2001 and 2007–2008 was 1.60 [95% Confidence Interval (CI): 1.51–1.70], and between 2009–2010 and 2015–2016 was 1.09 (95% CI: 1.02–1.18). Fatality rates increased among all age groups, particularly for motorcyclists aged 60 and older. Those aged 18–29 had the highest fatality rates overall. Age-and-sex standardized state fatality rates were consistently highest in Wyoming, South Dakota, and South Carolina and lowest in Massachusetts, New York and New Jersey.

Conclusion: Motorcycle fatality rates increased overall and across all age groups between 2000 and 2016. Fatalities for the oldest riders showed the steadiest increasing trends. Results highlight the continued public health burden of motorcyclist fatalities and, by extension, the importance of improving motorcycle safety.