Road traffic mortality in the Slovak Republic in 1996–2014

Objective: Road traffic mortality takes an enormous toll in every society. Transport safety interventions play a crucial role in improving the situation. In the period 1996–2014 several road safety measures, including a complex new road traffic law in 2009, were implemented in the Slovak Republic, introducing stricter conditions for road users.

The aim of this study is to describe and analyze the trends in road user mortality in the Slovak Republic in individual age groups by sex during the study period 1996–2014.

Methods: Data on overall mortality in the Slovak Republic for the period 1996–2014 were obtained from the Statistical Office of the Slovak Republic. Mortality rates were age-adjusted to the European standard population. Joinpoint regression was used to assess the statistical significance of change in time trends of calculated standardized mortality rates.

Results: Mortality rates of all types of road users as well as all age groups and both sexes in the Slovak Republic in the period 1996–2014 are decreasing. The male : female ratio decreased from 4:1 in 1996 to 2:1 in 2014. Motor vehicle users (other than motorcyclists) and pedestrians have the highest mortality rates among road user groups. Both of these groups show a significant decline in mortality rates over the study period. Within the age groups, people age 65 years and over have the highest mortality rates, followed by the age groups 25–64 and 15–24 years old.

Joinpoint regression confirmed a steady, significant decline in all mortality rates over the study period. A statistically significant decrease in mortality rates in the last years of the study period was observed in the age group 25–64 and in male motorcycle users.

Assessing the impact of the 2009 road traffic law, a drop was observed in the average standardized mortality rate of all road traffic users from 14.56 per 100,000 person years in the period 1996–2008 to 7.69 per 100,000 person years in the period 2009–2014. A similar drop in the average standardized mortality rate was observed in all individual road user groups.

Conclusions: The implementation of the new traffic regulations may have contributed significantly to the observed decrease in mortality rates of road users in the Slovak Republic. A significant decrease in mortality was observed in all population groups and in all groups of road users. The introduction of a new comprehensive road traffic law may have expedited the decrease of road fatalities, especially in the age group 25–64 years old. This type of evidence-based epidemiology data can be used for improved targeting of future public health measures for road traffic injury prevention.     

Managers’ conceptions regarding human factors in air traffic management and in airport operations

Human factors (HF) in creating and managing safety in complex systems is a continuous topic of research and discussion. In the aviation organisation under study here, an HF expert had started work in a newly created position one and a half years prior to the study. The aim of the study was to find out if HF was seen as a safety creating factor and what the conceptions of HF were in regard to the theoretical developments in the field. These topics were studied in order to determine the most effective means of implementing HF-work within the organisation. Two manager groups (upper and middle management) were targeted as subjects of the study due to their crucial role in developing working culture. Twenty-one managers were interviewed from nine units that represented three operational environments (radar units with heavy traffic, combined civil/military units and procedural air traffic control units, including airport operations. Managers were found to have disjointed and vague conceptions of HF and a lack of shared vision or strategy regarding HF. Some managers lacked an appropriate conception of HF. The present situation can prevent the organisation from utilizing HF competence in maintaining and developing the safety of services. Conceptions were most up-to-date at units, where outside pressures for change had forced managers to take HF issues into account in their operational environments. While the long-term implementation of HF faces considerable challenges, the article gives several proposals for organisational structures that support a more effective realization of HF.     

Risk assessment in support to land-use planning in Europe: Towards more consistent decisions?

Recognising the importance of establishing appropriate separation distances between hazardous installations and vulnerable residential areas for mitigating the effects of industrial accidents, the European legislation for the control of major accident hazards - the so-called Seveso II Directive - calls for procedures ensuring that technical advice is taken systematically into account for land-use planning (LUP) purposes. Due to historical, administrative, cultural and other reasons, these European Union’s Member States which have consolidated procedures for addressing this issue, have employed different approaches, methods and criteria, with a potential for great divergence in the resulting land-use planning decisions. In order to address this situation and to increase consistency and ‘defendability’ of land-use planning decisions in the EU, a European Working Group has been established and is operating under the coordination of the European Commission’s Joint Research Centre (JRC). This Group, consisting of experts from the EU Member States, the industry and the academia, is trying to understand the different approaches and their implications to LUP decision-making, to develop guidelines in support to these decisions and to examine data sources and tools for consistent application of risk assessment in support to LUP. This paper presents the activities of the Group, reviews the situation with respect to LUP in Europe and discusses whether a direction towards more consistent LUP decisions is being followed in Europe.     

Water Jet Technology in Petroleum Engineering

Ｉｎｒｅｃｅｎｔｔｗｅｎｔｙｙｅａｒｓ，ｗａｔｅｒｊｅｔｔｅｃｈｎｏｌｏｇｙｈａｓｒａｐｉｄｌｙｐｒｏｇｒｅｓｓｅｄａｎｄｉｓｂｅｉｎｇｗｉｄｅｌｙｓｐｒｅａｄｉｎｔｈｅａｐｐｌｉｃａｔｉｏｎｆｉｅｌｄｓａｓｏｎｅｏｆｔｈｅａｄｖａｎｃｅｄｍｏｄｅｒｎｍｅａｎｓｆｏｒｃｕｔｔｉｎｇ，ｆｒａｇｍｅｎｔｉｎｇａｎｄｃｌｅａｎｉｎｇｉｎｓｕｃｈｉｎｄｕｓｔｒｉｅｓａｓｃｏａｌｍｉｎｉｎｇ，ｍｅｔａｌｌｕｒｇｙ，ｐｅｔｒｏｌｅｕｍ，ｒａｉｌｗａｙ，ａｅｒｏｓｐａｃｅ，ｃｏｎ－ｓｔｒｕｃｔｉｏｎ，ｓｈｉｐ…     

Experimental investigation of fast flame propagation in stratified hydrogen–air mixtures in semi-confined flat layers

This paper presents results of an experimental investigation on fast flame propagation and the deflagration-to-detonation transition (DDT) and following detonation propagation in a semi-confined flat layer filled with stratified hydrogen–air mixtures. The experiments were performed in a transparent, rectangular channel open from below. The combustion channel has a width of 0.3 m and a length of 2.5 m. The effective layer thickness in the channel was varied by using different linear hydrogen concentration gradients. The method to create quasi-linear hydrogen concentration gradients that differ in the range and slope is also presented. The ignited mixtures were accelerated quickly to sonic flame speed in the first obstructed part of the channel. The interaction of the fast flame propagation with different obstacle set-ups was studied in the second part of the channel. The experimental results show an initiation of DDT by one additional metal grid in the obstructed semi-confined flat layer. Detonation propagation and failed detonation propagation were observed in obstructed and unobstructed parts of the channel.     

Deformation patterns in WorldSID 50th percentile dummy instrumented with IR-TRACC and RibEye™ in different loading configurations

Objective: The purpose of this study was to investigate the effect of different loading configurations on the WorldSID 50th percentile male dummy instrumented either with the Infra-Red Telescoping Rod for the Assessment of Chest Compression (IR-TRACC) or the RibEye? rib deflection measurement system.

Methods: The optical sensors of the RibEye system were used to capture the multipoint deformation of the dummy at frontal and rearward off-center locations in addition to the center of the rib location. The experimental setup consisted of 2 types of loadings: Low severity and high severity. Low-severity loading was performed by deploying a fixture-mounted side airbag on the dummy and high-severity loading was achieved by deploying a driver front airbag mounted in a similar fashion. The low-severity condition aimed at deforming the dummy’s ribs locally at off-center locations where the RibEye light emitting diodes (LEDs) were positioned to capture the deformations at those locations. The high-severity condition aimed at loading the dummy at high speed in lateral and oblique directions similar to what is experienced by dummies in side impacts.

Results: In the low-severity tests, the peak deflections, in terms of length change, were approximately 15–20?mm, whereas for the high-severity cases the peak deflections were in the range of 30–40?mm for both IR-TRACC and RibEye cases.

Conclusions: For similar physical insults, dummies with the IR-TRACC and RibEye systems showed varying results for both length changes and the shoulder forces depending on the severity and direction of loading. Under purely lateral loading, the mid-length changes with the RibEye and the 1D IR-TRACC were comparable. In the oblique loading conditions, more differences were seen with the 2 systems depending on the impact direction. The shoulder forces consistently differed between the 2 systems. In the frontal oblique low-severity cases, the ribs pivoted along the spine end and the length change was not found to be a suitable parameter to quantify rib deformation in such loading scenarios.     

Workers’ Involvement—A Missing Component in the Implementation of Occupational Safety and Health Management Systems in Enterprises

Effective implementation of occupational safety and health (OSH) legislation based on European Union directives requires promotion of OSH management systems ( OSH MS). To this end, voluntary Polish standards (PN-N-18000) have been adopted, setting forth OSH MS specifications and guidelines. However, the number of enterprises implementing OSH MS has increased slowly, falling short of expectations, which call for a new national policy on OSH MS promotion. To develop a national policy in this area, a survey was conducted in 40 enterprises with OSH MS in place. The survey was aimed at identifying motivational factors underlying OSH MS implementation decisions. Specifically, workers’ and their representatives’ involvement in OSH MS implementation was investigated. The results showed that the level of workers ‘ involvement was relatively low, which may result in a low effectiveness of those systems. The same result also applies to the involvement of workers’ representatives and that of trade unions.     

Smoke Suppession in Ploy (Vivngl Chloribe)

Polymeric materials are combustible in nature and poly (vtnyl chloride) is no ex-ception. Due to its high chlorine contents it is relatively fiame retardant, hawever be-cause of the processing aids such as plasttcizer etc. this advantage is lost. Duringburning the two main hazards of PVC are Hydrogen Chloride gas and copiousamount of smoke. Dtfferent methods for smoke suppression of polymers are also ap-plicable to the case of PVC. Complexes of dzfferent metal, mixedmetals and metalbased organics are discussed along with other methods of smoke suppression in PVC.Some aspects of smoke measurement have also been covered.     

Safety Management in Coal Mines—Risk Assessment

The present state of accident hazard at work in the Polish mining industry is presented. A comparison is made of the accident indices in relation to other countries. A reference is made to the work safety management system implemented in the mines. Safety management is discussed in terms of risk management. On the basis of the natural death index and that of accidents at work, numerical scales are presented defining the limits of the inadmissable, tolerable, and acceptable risk. The course of variation of risk indices for fatal, serious, and minor accidents is evaluated. The results of the assessment for all kinds of accidents at work in the mining industry are presented.     

Study on Lockout Procedures for the Safety of Workers Intervening on Equipment in the Municipal Sector in Québec

In Québec, workers intervening in hazardous zones of machines, equipment and processes during maintenance, repairs and unjamming activities have to apply lockout procedures. Lockout procedures involve shutting down the equipment, isolating it, applying individual locks, releasing residual energies and verifying the absence of energies. Lockout has mostly been linked to industrial sectors. However, the municipal sector also faces challenges when it comes to controlling hazardous energies. The objectives of this research are to study serious accidents linked to our subject, study the application of lockout in different municipalities in Québec, identify the specificities for the municipal sector and propose some means to support the application of lockout. We will show that lockout procedures are required in different locations in municipalities and that they are currently being implemented in the municipal sector in Québec. Moreover, we propose a model which aims at facilitating the implementation of lockout procedures in the municipal sector.     

A framework addressing a safe ageing management in complex industrial sites: The Italian experience in «Seveso» establishments

In Europe, the Directive 2012/18/EU (Seveso III) strengthens the obligation to adopt a program assuring the integrity of critical equipment at major hazard establishments, by taking into account actual deterioration mechanisms (internal and external corrosion, erosion, thermal and mechanical fatigue, etc.). The program must cover all phases of the lifecycle and ensure a safe ageing of equipment, particularly when these are reaching the final stage of life. The effectiveness of the integrity program must be carefully assessed during the audits planned by the establishment's operator as well as by inspectors on behalf of the Competent Authorities. The adoption of a Risk Based Inspection scheme provides a valuable help to face this matter. The operator is, anyway, required a considerable effort to face at least three issues related to: (i) the understanding of concurring physical and chemical phenomena; (ii) the management of information associated with each individual component and its history, (iii) the appropriate measurement, including acquisition and management of data. There is a considerable difficulty in understanding these issues during Seveso inspections and external audits, because time and resources are often limited. For this reason, models and methods supporting the definition of the ageing status and trend in industrial sites are needed. This paper analyses the main factors affecting ageing. A framework for “ageing” assessment in complex industrial sites, including “Seveso” establishments, is proposed; then, its validation, by means of data collected during a testing phase carried out in Italy, is also given.     

Forfeiture programs in California: why so few?

PROBLEM: It is estimated that at least 75% of suspended or revoked drivers continue to drive illegally. In states like California, there are also a substantial and growing number of people who drive without ever having been licensed. Some states, such as Ohio and California, have enacted vehicle impoundment and forfeiture programs as sanctions to reduce these offenses. Published evaluations indicate that vehicle impoundment laws reduce recidivism and crash rates. However, vehicle forfeiture programs have been less successful, mostly because of low levels of enforcement. METHOD: Police officers and district attorneys from 17 jurisdictions were interviewed by phone or in person to determine current enforcement levels and impediments to more aggressive application of statutory authority. RESULTS AND DISCUSSION: The survey found that most California jurisdictions are enforcing vehicle impoundments for first-time offenders. However, very few jurisdictions were enforcing the vehicle forfeiture law for repeat offenders. Among the reasons for not enforcing the vehicle forfeiture law was a perception that it was too time-consuming and/or not a priority among prosecutors. However, a number of authorities indicated that the simple vehicle impoundment procedure is often functionally equivalent to forfeiture because many drivers fail to retrieve the vehicle at the end of the impoundment period. IMPACT ON INDUSTRY: Vehicle impoundment programs are effective mechanisms in deterring illicit driving, and states should be encouraged to initiate vehicle impoundment laws. States could achieve even greater safety benefits if vehicle forfeiture sanctions were extensively used for repeat offenders. However, based on California's experience, the incremental benefits of vehicle forfeiture (over vehicle impoundment) may not be very great.     

Multilevel learning from accidents – Case studies in transport

Substantial efforts have been devoted to accident investigations, but do we gain a reasonable benefit from these efforts? The current study explores multilevel (individual, company, sector/trade, authorities) learning from major accidents and serious incidents. Specifically, this involves identifying a set of learning criteria, i.e. factors or indicators that potentially support and contribute to multilevel learning processes. Identifying such criteria is based on: (i) the accident investigation process, (ii) the follow-up efforts, and (iii) contextual aspects. Three Norwegian accident investigations in transportation (aviation, marine, rail) represent the empirical foundation for the study. Learning criteria were derived by both document analyses from the accidents (e.g. investigation reports) and literature reviews on organizational learning. These were the basis for a workshop regarding learning from accidents, with participants from the aviation, marine, and rail sector. Key results from this workshop are presented and discussed. The study concludes by presenting a set of criteria for learning from accidents.     

Working Life Across Cultures: “Work Life 2000: Quality in Work” and Occupational Health Education in Developing Countries

The article reflects on the changing world of work, and the challenges presented to both occupational health and occupational health education. We draw on the 63 preparatory workshops and the international conference in the “Work Life 2000: Quality in Work” program, an initiative of the Swedish Presidency of the European Union. The International Commission on Occupational Health is introduced, with particular concentration on a current practical project initiated by the Department of Health in South Africa, intended to lead to a set of projects, networking for occupational health education in developing countries. The practical initiatives cast light on a new set of issues that arise when occupational health and safety crosses cultural barriers, and previously separate comparative cases are linked.     

Mortality from road traffic accidents in a rapidly urbanizing Chinese city: A 20-year analysis in Shenzhen, 1994–2013

Objective: This study aimed to describe the trends of motorization and mortality rates from road traffic accidents and examine their associations in a rapidly urbanizing city in China, Shenzhen.

Methods: Using data from the Shenzhen Deaths Registry between 1994 and 2013, we calculated the annual mortality rates of road traffic accidents, in addition to the age- and sex-specific mortality rates and their annual percentage changes (APCs) for the period of 2000–2013. We also examined the associations between mortality rate of road traffic accidents and traffic growth with Spearman's rank correlation analysis and a log-linear model derived from Smeed's law.

Results: A total of 20,196 deaths due to road traffic accidents, including 14,391 (71.3%) male deaths and 5,805 (28.7%) female deaths, were recorded in Shenzhen from 1994 to 2013. The annual mortality rates in terms of deaths per population and deaths per vehicle changed in similar patterns, demonstrating an increase since 1994 and peaking in 1997, followed by a steady decrease thereafter. The decrease in mortality was faster in individuals aged 20 year or older compared to those younger than 20 years. The mortality rates in term of deaths per population were positively correlated with the total number of vehicles per kilometer of road but negatively correlated with the motorization rate in term of vehicles per population. The estimated model for deaths due to road traffic accidents in relation to the total population and the number of registered vehicles was ln (deaths/10,000 vehicles) = ?1.902 × ln (vehicles/population) ? 1.961. The coefficient was statistically significant (P < .001) and the coefficient of determination was 0.966, indicating a good model fit.

Conclusions: We described a generally decreasing trend in the mortality rates of road traffic accidents in a rapidly urbanizing Chinese city based observations in the 20-year period from 1994 to 2013. The decreased mortality rate may be explained by the expansion of road network construction, improved road safety regulations and management, as well as more accessible ambulance services in recent years. Nevertheless, road traffic accidents remain a universal problem of great public health concern in the whole population.     

Amalgam in Dentistry A Health Hazard for Dental Personnel?

In a cross sectional study done in 1993 among dental personnel in Norrbotten, self-reported prevalence of muscular pain, headache, tremor, insomnia, irritation, impaired memory and depression, as well as information regarding different mercury exposures were collected Mercury exposures were determined as “number of amalgam fillings in teeth,” “years in practice,” “insufficient ventilation at work,” “total number of amalgam removed, produced and polished per day,” and “working in dental clinics.” As controls, physicians and nurses from the same geographical area were selected. The correlation between symptoms and different mercury exposures was calculated using logistic regression. The results suggested a higher prevalence of muscular fatigue and tremor for female dental personnel compared to controls Controls reported a lower prevalence of symptoms with increasing number of amalgam fillings in teeth. There was no correlation between the number of amalgam fillings handled per day and symptoms for dental personnel. Male dental personnel associated muscular fatigue headache, impaired memory, and depression with increased handling of amalgam in the clinic’ whereas the female dental personnel associated the same symptoms with the number of amalgam fillings in teeth. The strongest correlation was found between symptoms and insufficient ventilation at dental clinics for dental personnel.     

Trust and distrust in safety leadership: Mirror reflections?

Although research shows that employees’ trust and distrust in management influences their safety behavior, less is known about how these attitudes develop. Based on two-factor models of trust, we hypothesize that distinct trustworthiness qualities precede the development of employees’ trust and distrust in their supervisors. Eighty-five UK construction employees responded to a paired comparison test of trustworthiness qualities, which provided 56 and 53 consistent rankings for trust and distrust, respectively. Consistent with our hypotheses, integrity (measured through honesty) was found to be the most important attitude in the development of both trust and distrust, while a reversed ordering of importance emerged for ability (measured through competence) and benevolence (measured through concern) in the development of trust and distrust. In all cases, only a small number of qualities were most important in the development of each attitude. We discuss how safety initiatives that focus on trust might gain by addressing the qualities that we identify.